I Odin-ed the JK6 update and when i look under status, it said "unknown" under Phone number. Does this happen to everyone too?
Another thing i found is that the menu button's vibration feed back is laggy. Like i would press the button then it would vibrate shortly after. For the other three buttons it would vibrate upon pressed. Is this a new thing in Froyo? I dont recall Eclair behave like this.
Also, does anyone having battery issue with JK6? Mine seem to drain a bit quicker than when i was running JI6.
the leak is buggy,
let's just wait for the official one, it should be soon..
sumasage said:
I Odin-ed the JK6 update and when i look under status, it said "unknown" under Phone number. Does this happen to everyone too?
Another thing i found is that the menu button's vibration feed back is laggy. Like i would press the button then it would vibrate shortly after. For the other three buttons it would vibrate upon pressed. Is this a new thing in Froyo? I dont recall Eclair behave like this.
Also, does anyone having battery issue with JK6? Mine seem to drain a bit quicker than when i was running JI6.
Click to expand...
Click to collapse
Mine shows "unknown" for the phone #. I'm running pure stock JI6, so this issue is not specific to JK6. I don't use key vibrate (seems like a battery drain to me) so can't comment on that.
Edit: I don't check this very often, so took a look and now mine is showing the #. I know it was "unknown" for a month or two after I got the phone at the end of July, but there was a period where it did show the #, then the JI6 update seemed to set it back to unknown. Now the # is back. No idea what would make it toggle like that.
I don't see why this is so "huge" that everyone mentions the Unknown under your phone number...? It doesn't affect anything. MMS isn't affected by this.
Anywho, Slight lag in the applications drawer though but it's very subtle and the issues with MMS picture quality (but hopefully that's fixed after Froyo is "Officially" released.
One more thing, last night I was on EDGE and pulled the status bar down to activate Wifi. It just said "ON" underneath it and didn't do anything, so I went into the settings and looked and stated "ERROR". Tried again to activate it and it didn't do anything, actually locked the phone for a few seconds then the phone started vibrating when I touched the screen. After that I got back to the Settings menu and activated Wifi again and it went through.. weird.
Otherwise no other issues I've run into.
Unknown number is not a huge problem as you can make/receive calls and text. Only thing I've run into is that you can't use the Verizon Fios Remote DVR app since it's tied to your phone number. That ws my only problem anyway.
Off topic, I've tried a lot of the customized ROMs and leaks. Seems I'm always back to stock JI6 which works great for me with the exception of it being a little laggy. Been trying the Voodoo lag fix on it but can't get it to work on JI6. But that's a completely different topic....
Going to stick with JI6 until the official Froyo comes out.
Can you guys send MMS? I get a server error everytime I try?
I have the Phone number unknown as well. My Home button is what is giving me problems. It is very temperamental. Doesn't work most of the time.
javacody said:
Can you guys send MMS? I get a server error everytime I try?
Click to expand...
Click to collapse
Can send and receive mms. quality sucks though as of right now..
Odin'd the leaked *untouched* ROM.
I just odin JK6 and I can confirm my does say unknown for phone number. One thing I have noticed is before if you used to volume rocker to lower the ringer, you then reach vibrate and then silent. Now the phone simply goes into vibrate, nothing lower then that.
YatimaMeiji said:
I just odin JK6 and I can confirm my does say unknown for phone number. One thing I have noticed is before if you used to volume rocker to lower the ringer, you then reach vibrate and then silent. Now the phone simply goes into vibrate, nothing lower then that.
Click to expand...
Click to collapse
Which I like, I never used Silent, only vibrant. I freaking bought the Beautiful Widgets for the button for Vibrant, now all I have to do is drag down the status bar and change it.
I think you can change the function of the button/rocker in the Settings.. as far as what it does, silent/vibrate
Not sure if its a bug, but at one point the web browser kept popping up an error saying there is no Internet connectivity, click retry or ok. I was on wifi at the time. A reboot cleared it out, but it happening was odd.
I was just wondering if it just me or it is the ROM it self. To me, if it said unknown mean there is some issue with the rom, not goin to blame anyone since it is not official.
I can confirm the volume rocker too, it goes to vibrate at the lowest. The silent from the notification just make the phone vibrate as well.
I did have some trouble with 3G this morning. Tried to get on navigation and it just say "getting direction" for a while. When i look back i dont have Edge or 3G icon, check in status it said GPRS. I rebooted the phone andgot 3g back. Kind of weird. I hope the final come soon....
Related
Every once in a while for the past month or two, when I receive a call, my X10 will vibrate and ring as normal, but the screen will be blank rather than presenting the caller ID and call answer buttons. Sometimes when this happens, it'll eventually show up, while other times I simply get a FC message regarding the phone app.
In the time since I first experienced this, I have upgraded my stock 014 firmware to 016 through SEUS via Rogers, and then this past weekend I rooted the phone to R2BA023, and yet it still happens.
I have disabled both Facebook and Twitter sync in the settings panel, and have tried changing my ringtone all to no avail.
Has anyone else experienced something similar, and maybe know what may be causing this?
I'm going to attempt some testing with various 3rd-party apps uninstalled, to see if it may be some sort of conflict, but I find it odd this has persisted through firmware updates and complete OS re-install (root).
Hi - Yes I've had this happen too.. not very often, but seems to be when I'm in the middle of doing something else.. Think it was when I was in Handscent SMS when it happened today.
Same it happen to me, i just beat on it until it blink up the damn slide. Which 9 out of 10, i will miss the call thanks to the stupid slide still being as slow as before the update.
OT (so apologies)... my swipe is super fast since the update... Are you running any task killers or anything.. (I'm not...)..
wrongfeifong said:
Same it happen to me, i just beat on it until it blink up the damn slide. Which 9 out of 10, i will miss the call thanks to the stupid slide still being as slow as before the update.
Click to expand...
Click to collapse
I generally do, but it still pisses me off. I have a feeling it's just SE's version of the phone app, but I can't be sure.
I'm using Phonebook 2.0 as an alternate contact manager, but calls still come through the default phone app, and I'm not sure if there's a way to change that without a custom ROM.
saltorio said:
Every once in a while for the past month or two, when I receive a call, my X10 will vibrate and ring as normal, but the screen will be blank rather than presenting the caller ID and call answer buttons. Sometimes when this happens, it'll eventually show up, while other times I simply get a FC message regarding the phone app.
In the time since I first experienced this, I have upgraded my stock 014 firmware to 016 through SEUS via Rogers, and then this past weekend I rooted the phone to R2BA023, and yet it still happens.
I have disabled both Facebook and Twitter sync in the settings panel, and have tried changing my ringtone all to no avail.
Has anyone else experienced something similar, and maybe know what may be causing this?
I'm going to attempt some testing with various 3rd-party apps uninstalled, to see if it may be some sort of conflict, but I find it odd this has persisted through firmware updates and complete OS re-install (root).
Click to expand...
Click to collapse
Yeah have noticed this issue sometimes. I am on generic R2BA020 uk firmware.
When the phone rings, the screen lights up but I cant answer cause the screen is a Blank blue screen for like 5-8 seconds. After which the slider pops up allowing me to answer. Never had this problem on the older firmware.
I dont use a task killer or handcent.
I'm surprised I haven't seen a thread on here about reception issues. My 3G goes in and out , from 4 bars to 1 and even zero bars at times while the phone is staying in the exact spot. does anyone thing this is a hardware or software issue?
The lock screen totally lags. it's almost ridiculous I have about 4 frames for the entire animation of it sliding left to right
I can't figure out a way to make the SMS limit per conversation over 1000. The phone keeps deleting my texts =( Is there a way around this I'm missing ...?
Love the phone it just seems like there's a few REALLY silly stupid problems with it .
Edit:
My voice search just will not search my contacts... I noticed it will only find contacts which are synced with Google, however even though i have my options to sync my contacts. i still only have 5/173 of my contacts synced.
For some silly reason there is ONE person ( that i know of) who's facebook profile was not downloaded into my phonebook . I only care for the picture ID .. but it's odd every one else (whom i know of) was downloaded other than him, spoke to him there's nothing special about his profile.
Edit 2:
Has anyone noticed a clicking sound which sometimes happens whenever the camera is opened? It sounds as if something near the camera is physically clicking
any other droid 2 owners have these problems?
You're totally right about the 3G going in and out. I'm in my basement and when I'm on a call, it actually drops. Last night I called my g/f back from my house phone, and the bars jumped from 1 back to 4. Sometimes I get that 1X instead of 3G.
The phone totally has potential, I just hope a root comes out soon and we have a lot of room to play with. I came off the Motorola Cliq to the Droid 2 and honestly, even with my Cliq rooted, it seems way superior to the quality I'm getting on the Droid 2.
Let alone that the service provider is Verizon, the service should be the best... The only good thing I can say about the phone is that I'm able to watch flash videos off the web, and the new games coming out are actually playable without lag. Other than that, Tethering without root is like having PDAnet on my phone. I use EasyTether right now and it's not much faster that PDAnet. I also hope when root drops, j_r0dd from modmymobile gets his hands on it, I missed my white on black theme and I prefer the Droid X bootanimation on my start up.
have you tried the manual update to 2.2.20? I experienced the signal bug having my reception drop to 1x while it was 3g a minute before and the phone wasn't moved, but after i did the manual update to 2.2.20 by going to system -> software update i haven't seen it since.
With the unlock screen, I at first noticed lag but after reading motorolas recommendations on how a smartphone is like a computer and it should be shut off / rebooted occasionally, i did shut down a couple times and the phone is very smooth now and the unlock animation is perfect.
try shutting down the phone and unplugging the battery for a little and then put the battery back in and let it boot up. I believe the phone uses some kind of cache system that loads up frequently used items on startup, maybe that is why its smooth now.
droid2andyou said:
With the unlock screen, I at first noticed lag but after reading motorolas recommendations on how a smartphone is like a computer and it should be shut off / rebooted occasionally, i did shut down a couple times and the phone is very smooth now and the unlock animation is perfect.
Click to expand...
Click to collapse
Bull****.
10 char.
droid2andyou said:
have you tried the manual update to 2.2.20? I experienced the signal bug having my reception drop to 1x while it was 3g a minute before and the phone wasn't moved, but after i did the manual update to 2.2.20 by going to system -> software update i haven't seen it since.
With the unlock screen, I at first noticed lag but after reading motorolas recommendations on how a smartphone is like a computer and it should be shut off / rebooted occasionally, i did shut down a couple times and the phone is very smooth now and the unlock animation is perfect.
try shutting down the phone and unplugging the battery for a little and then put the battery back in and let it boot up. I believe the phone uses some kind of cache system that loads up frequently used items on start up, maybe that is why its smooth now.
Click to expand...
Click to collapse
The update did nothing for me =/... I've rebooted countless times, still nothing , the next thing that really aggravates is the text message limit... smart phones are supposed to have practically unlimited sms/phone book storage. I still can't find a way around it .
Biggest problems are the reception issues, considering it's most probably a hardware issue and no update will fix it=(
shoman24v said:
Bull****.
10 char.
Click to expand...
Click to collapse
I don't know what to say, it was laggy when i first got the phone and after a few shutdowns and restarts over a couple days and a shutdown battery pull for 10 minutes and a reboot and its been perfect ever since. seems like you don't know what your doing.
Bull****. The slider to answer calls is smooth. The lockscreen is not and rebooting it does not fix it. Post a video so I can believe you. I even reset the phone and it didn't help.
Sent from my DROID2 using Tapatalk
I've had my Droid 2 since the release day, my first Verizon phone. I have to agree with the lock screen lag, but I have noticed something interesting with the reception issues. I'm new to verizon so I don't know if this happens with other verizon android phones but when I first wake the phone up from sleep I have one to no bars then 5-10 seconds later I usually have 4-5 bars. It seems as if the cdma radio/software goes into a type of power save mode durring sleep to save on battery power. If this is the case I can imagine the issue could be something to do the the power save mode hanging when the system wakes up, also power save mode could be a little too sensitive.
Now my inferences are completely unfounded in any knowledge other than my observations, and some basic knowledge of porting android to my old Att Tilt. If there is someone out there who knows more please correct me as I would love to stand corrected.
Sent from my DROID2 using XDA App
Yup same here, the slider to answer calls is fine. I've come to a conclusion its just a buggy OS moto prepared quickly. Let's hope for a real update soon.
Sent from my DROID2 using XDA App
My 3G as of now seems to have fixed itself this morning . Has this happened for anyone else ?
after doing the 2.20 update my signal problems were all fixed and the phone works increible!!!
yes there is a little clicking sound when you go to the camera. If you look into the camera lends as you open the camera app you can see it sorta move a tiny bit so there might be some protectivething over the camera lens somewhere inside there but that is just a guess.
shoman24v said:
Bull****. The slider to answer calls is smooth. The lockscreen is not and rebooting it does not fix it. Post a video so I can believe you. I even reset the phone and it didn't help.
Sent from my DROID2 using Tapatalk
Click to expand...
Click to collapse
your asking for a lot right now. I'm not 100% sure what yours looks like but my animation at first was choppy. I noticed it the first couple times I used my phone. However after a few shutdowns and battery pulls the lock screen seems to be pretty smooth and it follows my finger with no lag.
I have also removed all the Motorola widgets from my home screens, not sure if that had something to do with it.
The 2.2.0 update did nothing whatsoever to fix my signal issues. Still getting wide variations in coverage and signal (1bar 1x RTT to 1 bar 3g to 3-4 bars 3g all from the same spot in multiple areas)
Have you tried using another launcher like launcher pro, it fixed the lag with my unlock screen, I think the blur uses up too much memory.
Sent from my DROID2 using XDA App
The update did nothing to fix my signal issues. I don't have a problem with lag except in the gallery.
I called customer server to complain about the reception problems. The rep I talked to said Verizon is aware of the reception problems, but they aren't sure if it's the phone or the network.
He said there are other people in my area complaining of reception problems that don't have the Droid 2. He also mentioned something about areas that were mostly Alltel that are having problems. He did something on his end that is suppose to block some kind of signal having to do with Alltel and had me run the PRL update again, he said it could take up to 2 days for me to notice a difference if that was the problem.
I was also told to log each dropped call by dialing ### send.
I noticed something odd, yesterday I did a factory reset, after rooting. When I started to set everthing up I turned off the battery manager in settings, and since then it appears if all my reception issues have disappeared.
Sent from my DROID2 using XDA App
Is that something you can configure after a factory reset without root?
Yeah, if you go to settings, battery manager, battery mode, and set it to performance. Let me know if you notice anything different.
Sent from my DROID2 using XDA App
jcatt said:
Yeah, if you go to settings, battery manager, battery mode, and set it to performance. Let me know if you notice anything different.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Ah, I've always been running mine in performance mode. Did a factory reset last night and still nothing. This is really getting frustrating.
To all in this thread,
I forgive those who are ignorant and just don't know. However, if you are purposely ignorant then please stop posting.
daredevile said:
I'm surprised I haven't seen a thread on here about reception issues. My 3G goes in and out , from 4 bars to 1 and even zero bars at times while the phone is staying in the exact spot. does anyone thing this is a hardware or software issue?
Click to expand...
Click to collapse
3G only shows and lights up if data transfer is occurring or if you have no 1X signal. The signal bars jump because the radio is not always transferring data (over 3G) and therefore you see it grab the signal (0-1 bars) then get full signal (3-4 bars depending on coverage of course) and once finished, bye bye.
This saves you battery. It is truly a SMARTphone. It also keeps bandwidth available to those also using a Motorola D2 and wondering the same thing.
daredevile said:
The lock screen totally lags. it's almost ridiculous I have about 4 frames for the entire animation of it sliding left to right
Click to expand...
Click to collapse
I noticed this as well. Could be too much going on since you just turned your screen back on and apps are trying to update for you. Kind of like how you quickly pull your pants back up as your g/f is walking in the door and you act like nothing happened, but you were totally going to town.
daredevile said:
I can't figure out a way to make the SMS limit per conversation over 1000. The phone keeps deleting my texts =( Is there a way around this I'm missing ...?
Click to expand...
Click to collapse
If there isn't a setting in the Text Messaging application then no. Possible solutions are to look for an app or keep hanging around here.
daredevile said:
Love the phone it just seems like there's a few REALLY silly stupid problems with it .
Click to expand...
Click to collapse
It's only stupid until you get used to it. Then it's annoying. Then it's silly. Then you'll find a way to get around the issues or an update will fix them.
daredevile said:
My voice search just will not search my contacts... I noticed it will only find contacts which are synced with Google, however even though i have my options to sync my contacts. i still only have 5/173 of my contacts synced.
Click to expand...
Click to collapse
Try another Voice app or sync all your contacts with Google.
daredevile said:
For some silly reason there is ONE person ( that i know of) who's facebook profile was not downloaded into my phonebook . I only care for the picture ID .. but it's odd every one else (whom i know of) was downloaded other than him, spoke to him there's nothing special about his profile.
Click to expand...
Click to collapse
Facebook syncing has issues - sometimes really weird issues. It's a problem across all phone OS's.
daredevile said:
Has anyone noticed a clicking sound which sometimes happens whenever the camera is opened? It sounds as if something near the camera is physically clicking
Click to expand...
Click to collapse
the phone has a mechanical shutter. hence the amazing pictures. it IS physically clicking. it's pretty sweet.
Not the main reason for this post, but first I'd like to mention that I've noticed I'm unable to send long texts when i'm in 1x. I think this is an EB01 issue because I vaguely recall seeing a post about that. Am I correct on this?
Anyways, the main point of my post. I use delivery confirmations, and typically I'll send a text, lock my phone, and a few seconds later the screen will come back on, show the delivery in the notification bar, and then go off again a few seconds later. But sometimes, often enough to notice, I'd say several times a day, I'll lock my phone, and I own't get the delivery report. Then say, 5 minutes later, when I push the power button on the phone to wake it up, the delivery report immediatly pops up, and whatever the person may have texted me back will then pop up too. I'm receiving no notification of the delivery, OR the sms I receieve from the person, until I wake my phone up.
Is anyone else experiencing this? Is this an EB01 issue, or something with Sc?
You disabled retrive option in message settings....
jenisiz said:
You disabled retrive option in message settings....
Click to expand...
Click to collapse
Huh? You mean Auto Retrieve for MMS? That's not even what the post is about. And if it were, I wrote that problem is intermittent, sometimes it happens, sometimes it doesn't, so changing a setting "on" or "off" probably wouldn't be the solution. But yes, MMS auto retrieve is, and always has been, on.
Did you clear your user data and cache after you loaded SC?
Dewmgaze said:
Huh? You mean Auto Retrieve for MMS? That's not even what the post is about. And if it were, I wrote that problem is intermittent, sometimes it happens, sometimes it doesn't, so changing a setting "on" or "off" probably wouldn't be the solution. But yes, MMS auto retrieve is, and always has been, on.
Click to expand...
Click to collapse
Actually that is what this post was about...often when people switch to another sms app they switch that off. When that is switched off, you will not receive texts (regular and mms) until the phone is "awake". I'd attempt downloading another sms app and seeing if the results are the same.
Yes, I wiped data AND cache. And auto retrieve is on. The problem doesn't happen all the time, maybe like once ever couple hours I'll notice it.
Dewmgaze said:
Yes, I wiped data AND cache. And auto retrieve is on. The problem doesn't happen all the time, maybe like once ever couple hours I'll notice it.
Click to expand...
Click to collapse
Dew, try go sms and see if it works any different. Only time I've seen this is when the settings I mentioned are turned off or when the phone loses all service in sleep mode.
jenisiz said:
Dew, try go sms and see if it works any different. Only time I've seen this is when the settings I mentioned are turned off or when the phone loses all service in sleep mode.
Click to expand...
Click to collapse
Just did it again today. Sent a text to my gf, locked my phone. Never got the beep for the delivery, or her reply. Soon as I unlock it a few min later, both come through. Also, the text will have the current time on it, which does make it feel like the phone is losing service while sleeping. However, the speed at which the delivery and subsequent text alerts come through is near instant, < 1 second after the unlock screen appears, so it's as if the phone recieved them, but choose to act as if it hadn't.
As for trying another SMS app, that's not really a solution for me, I'm pretty happy with, and used to, the stock msging app.
Im not suggesting you keep it...i'm saying to see if it's a continuous problem. you don't even have to use the other app...u just want to see if it notifies.
I have the eb01 with 2.4 and I dont have that issue. Try reflashing 2.4
Sent from my eb01 super fast fascinate
jenisiz said:
Im not suggesting you keep it...i'm saying to see if it's a continuous problem. you don't even have to use the other app...u just want to see if it notifies.
Click to expand...
Click to collapse
Giving it a whirl, will report back tomorrow sometime.
If you want to run a logcat, I can tell you if I have the same issue. I'm trying to hunt down a solution and I'm going crazy, but I know exactly what it looks like.
Okay, so I'm still having the same issues with Go sms. The phone will be locked, and when I unlock it say, 5 to 10 minutes later, the delivery reports pop up, the stock sms and go sms notifications pop up, and the times on the texts will be the current time, as if they were just recieved.
I too am having this issue. Any solution yet?
Is everyone who is having this issue running SC ????
Reason I ask is cause I'm not, and haven't seen this problem, at all, ever.
mexiken said:
Is everyone who is having this issue running SC ????
Reason I ask is cause I'm not, and haven't seen this problem, at all, ever.
Click to expand...
Click to collapse
I'm running sc 2.4 on a verizon modem using a custom sprint/cricket prl. No problems here. As stated before, I only received this problem when I accidentally toggled with the retrieve settings. I switched them back and have been using chomp happily.
mexiken said:
Is everyone who is having this issue running SC ????
Reason I ask is cause I'm not, and haven't seen this problem, at all, ever.
Click to expand...
Click to collapse
I'm running SC 2.4 and I have only seen this issue once so far, that being this morning. I rebooted and haven't had it happen since. I haven't ever had this happen before using SC 2.4.
Hey everyone, i decided to create a thread for all Atrix owners for all Hardware/Software issues.
The goal is to hopefully document all known problems so that owners can be aware of issues and possible solutions.
I don't have a Atrix myself, but 2 friends of mine do and i will post there issues and the problems we have had so far!
So please post all problems so that we can easily find issues here.
So 2 of my friends have the Atrix and man it's been ridiculous so far!
Friend M. the "mooseman", is on his 3rd Atrix!!!
-First issue he had on Atrix #1, the charge/battery low LED on the top right did not turn on ever! When charging or full battery or low battery, led never came on!
-Second issue on Atrix #1, the phone wouldn't want to charge past the 40% charge mark either using the wall charger or from usb power from a pc. Factory reset, removing battery and cycling battery no good.
Solution: Atrix was exchanged for a new unit.
Atrix #2 from the "mooseman"
-First issue was again a charging issue that got stuck at a percentage, i think it was at 80%, even after being left on wall charger for a hour, Again no good.
-Second issue was that the screen was "Flickering" mainly very noticeable on any black displayed on the screen. We first saw it on the home screen background on a black part of the background, tried resetting rebooting, no good!
Solution: Atrix was exchanged for a new unit. At the bell store the tech wasn't even able to access the sim card over usb on the Atrix with a special device they had to copy sim contacts and info.
"Mooseman" is on his 3rd Atrix and so far so good, for now. All his Atrix's were from Bell and running 2.2
Friend M-furries. the "Iranian Warlord", will be going onto his 4th Atrix!!!
-First issue with his Atrix #1, he was experiencing call connection problems and dropped calls if i remember correctly. Also he told me that it would turn on by itself sometimes.
Solution: Exchanged the Atrix for a new one.
-Issue on Attrix #2, he had rooted the phone and enable 3rd party programs within settings, phone was functioning fine and was rebooted many times without issue.
He then decided to download "Talking Carl.ipa" which is a iphone app lol, why, god knows, but he tried it and when he did it didn't work as expected and gave him a force close, he forced closed and when he did, the phone rebooted.
Only thing was that know it wasn't booting up at all! It remained on the pulsing moto bootup logo and did not boot, even after many attempts nothing.
He went into recovery mode and did factory reset, what happened after that?
His phone booted up except that the resolution of the screen was as if it was really high as everything including the main menu, taskbar icons, text, everything was supper small and very hard to see!!! Furthermore he tried the phone dialer and nothing, it would try to open then instantly close! So no more phone except if it was a incoming call . He then looked for a stock rom for the Atrix but didn't find any so he tried to install gingerblur rom and still no good, everything was super small and phone dialer still closed when launched! We downloaded all drivers, moto agent and motorola sync and could you believe that there is no emergency firmware recovery within motorola sync!!! No recovery or option to upload a firmware, wtf!!! The samsung galaxy S had that option through Samsung Kies, as does the iPhone from iTunes, what the hell motorola!!! Called there tech support and it was useless, they tried a ota update lol!
Solution: Exchanged the Atrix for a new one.
-Attrix #3, he had it for a couple of weeks and now he is getting an issue with the screen "Flickering", it appears to be "Flickering" on the top status bar!!!
Solution: "Iranian Warlord" will be sending this unit in to get another one!!! He will be on his 4th Atrix!!! lol! All his Atrix's were also from Bell and running 2.2
Mods, can we make this a stickey?
Tell us more..
Well hopefully he will have a good unit when he gets his 4th Atrix, i hope! I'll let you guys know as soon as he gets it.
Update: Actually my friend with the "Attrix #3, he had it for a couple of weeks and now he is getting an issue with the screen "Flickering", it appears to be "Flickering" on the top status bar!!!"
After further investigation, It's actually the whole screen that was flickering, furthermore it only appeared when the battery was around 20%, however it disappeared as the battery further discharge towards the 5% battery level, strange indeed. Perhaps somethings up with the power management.
We also found out that there is a Bell update for 2.2 that fixes a couple of bugs, so we'll try that out on his phone and after testing it for a while I'll post here any updates from it! Hope that it works because these are awesome superphones!
We are going to try this update first before getting the 4th atrix.
speeman2049 said:
-Issue on Attrix #2, he had rooted the phone and enable 3rd party programs within settings, phone was functioning fine and was rebooted many times without issue.
He then decided to download "Talking Carl.ipa" which is a iphone app lol, why, god knows, but he tried it and when he did it didn't work as expected and gave him a force close, he forced closed and when he did, the phone rebooted.
Only thing was that know it wasn't booting up at all! It remained on the pulsing moto bootup logo and did not boot, even after many attempts nothing.
He went into recovery mode and did factory reset, what happened after that?
His phone booted up except that the resolution of the screen was as if it was really high as everything including the main menu, taskbar icons, text, everything was supper small and very hard to see!!! Furthermore he tried the phone dialer and nothing, it would try to open then instantly close! So no more phone except if it was a incoming call . He then looked for a stock rom for the Atrix but didn't find any so he tried to install gingerblur rom and still no good, everything was super small and phone dialer still closed when launched! We downloaded all drivers, moto agent and motorola sync and could you believe that there is no emergency firmware recovery within motorola sync!!! No recovery or option to upload a firmware, wtf!!! The samsung galaxy S had that option through Samsung Kies, as does the iPhone from iTunes, what the hell motorola!!! Called there tech support and it was useless, they tried a ota update lol!
Click to expand...
Click to collapse
Sorry to say but your friend is an IDIOT there! Like really? What was he thinking loading an iPhone app. It's OBVIOUS that it WON'T work. I mean if it was THAT easy, we'd have ALL of the iPhone apps running alongside with our android ones! Second this is in no means a fault on the Atrix. This is purely HIS fault. Your friend took the chance too root. He should have done his research and had he, he would have read in basically every ROM/root thread here that THE BELL ATRIX does NOT have a SBF to fall back.
I'm just surprise that Bell would let you exchange the phone because once you root, you lose your warranty.
fairly happy with 2nd one BUT !!! .....
My 2nd Atrix works OK so far. The first had the voice quality issue.
I still have 2 big problems:
1. WiFi crashing router. After some time (sometimes many hours) my router will crash (needs full restart/unplug). I put the Atrix on its own router so it does not affect the rest of my home network.
This happens with my Actiontec (FIOS), D-Link Dir655 and Linksys WRT54GP2 (super old but thats what the Atrix is currently on)
My DIR655 is running pretty old Firmware but I just dread redoing all my setup/config if I go to the latest 1.3x.
Does anyone here use the Atrix on a DIR655 N router without problems?
I turned Wifi sleep of on the phone etc, etc but still!
Pretty annoying but I can live with it. My first Atrix did exactly the same.
2. VOIP mic problems! Skype, sipdroid etc... Its supposedly a problem with the MOTO implementation of the AudioSource Object. Its very limited and does not allow commonly used settings. I read that you can also only use the back mic.
I wonder what MOTOs official statement on that is?
Its true and I told him that he was retarded for even trying that lol! Luckily he was able to change it! However he is still having issues with this atrix, he's waiting for the bell ota update to fix a bunch of bugs on 2.2
My 2 friend's haven't had any wifi problems though, perhaps its the router your on? Wifi has always worked on all they're atrix's that they had so far!
Issues:
1. The LED (one of them would flicker and then go off).
2. The voice quality on the phone. Everyone would tell me I sounded muffled.
3. I have a problem with network error on the Market app.
4. If I leave my finger relatively still on the screen for longer than 15 secs, the will stop responding for a few secs and go crazy. (This happens with all units. It's a "feature" on the phone). Kind of makes it hard to play games.
5. I can't lay down the phone on any surface that is not flat, as the LCD will not work (ie. bed)
6. I get randomly disconnected from the AT&T network.
7. I get a few reboots per week. Sometimes in the middle of a call.
That's all. Besides those things, the phone...is still horrible.
spacev said:
Does anyone here use the Atrix on a DIR655 N router without problems?
Click to expand...
Click to collapse
I'm actually using a DIR655 and I don't have any problems. Then again, I'm using firmware 1.33NA. That's bizarre though, I've never heard of a device crashing the router. I'd recommend that you bite the bullet and upgrade your firmware. You do know that you can save your current configuration, right? It's under:
Tools > System > Save to local harddrive
Love this phone so far. Luckily I haven't noticed any of the mentioned problems. Except 1, with VOIP, it doesn't seem to be working properly. Yesterday I tried Skype, tried speakerphone, tried headset, tried BT, nothing worked, I can hear the caller, but they can't hear me at all. Now today I tried again, I can still hear them, and there is a weird progress, they can hear me, not with BT, but with headset and speaker both, but my voice as they say was very broken, noisy, too much disturbance etc...
Besides this issue, (M)Atrix rocks!!!
Atrix just wont connect to mobile data, it will tease you with showing you there is an H+ connection available, but it wont let you axx it..
And it worked fine for one day x.x
wirednix said:
Issues:
1. The LED (one of them would flicker and then go off).
Click to expand...
Click to collapse
no issue here on that...not sure what to suggest :/
2. The voice quality on the phone. Everyone would tell me I sounded muffled.
Click to expand...
Click to collapse
hmm...I remember reading that people that had this issue, when they lowered the noise cancelation feature, they didn't sound muffle anymore. Maybe you can try this out? I don't have this issue, so not sure if that will help.
3. I have a problem with network error on the Market app.
Click to expand...
Click to collapse
Are you still getting this on WIFI? I know sometimes the Market acts up on its own, though I haven't heard of it happening recently.
4. If I leave my finger relatively still on the screen for longer than 15 secs, the will stop responding for a few secs and go crazy. (This happens with all units. It's a "feature" on the phone). Kind of makes it hard to play games.
Click to expand...
Click to collapse
hmm...got to try this to see if I have this issue.
5. I can't lay down the phone on any surface that is not flat, as the LCD will not work (ie. bed)
Click to expand...
Click to collapse
I've noticed the opposite accutally...if the phone is ON a flat surface, it doesn't respond properly. Like multiple times I am required to click on an icon shortcut on the homescreen.
7. I get a few reboots per week. Sometimes in the middle of a call.
That's all. Besides those things, the phone...is still horrible.
Click to expand...
Click to collapse
I think you should exchange it for a different phone :/ I know the reboot issue is fixed with the 1.5.something update for AT&T.
CrazyMcCool said:
Atrix just wont connect to mobile data, it will tease you with showing you there is an H+ connection available, but it wont let you axx it..
Click to expand...
Click to collapse
Have you forced trottle your network to only be 3G? Are you in a known weak 3G area when that happens?
I've been having issues with my i9505 not always "waking up" when someone tries to ring me, and instead they get sent directly to my voicemail.
It's inconsistent from speaking to people who have tried to ring me and got my voicemail, even though my phone is ALWAYS ON 24/7 with a near maximum H+ signal, and always near full charge.
Is it normal when you press the home key and the lock screen appears that the clock initially shows the last time the phone was "woken" or "unlocked" and then in an instant corrects itself to the correct time??
It feels like the phone is going into a deeper sleep state than I'd like which MAY be causing my issues?
hotlips69 said:
I've been having issues with my i9505 not always "waking up" when someone tries to ring me, and instead they get sent directly to my voicemail.
It's inconsistent from speaking to people who have tried to ring me and got my voicemail, even though my phone is ALWAYS ON 24/7 with a near maximum H+ signal, and always near full charge.
Is it normal when you press the home key and the lock screen appears that the clock initially shows the last time the phone was "woken" or "unlocked" and then in an instant corrects itself to the correct time??
It feels like the phone is going into a deeper sleep state than I'd like which MAY be causing my issues?
Click to expand...
Click to collapse
have u updated to new version without a complete reset ?
If so do a Reset and try
factory reset and you should be all set
CP-93 said:
factory reset and you should be all set
Click to expand...
Click to collapse
I've not done any updates whatsoever and have only had the phone for 2 weeks, and simply installed several apps.
It took ages to configure the phone settings to my liking, so I really don't want to factory reset it.
Does the "clock not updating on lock screen" that I mentioned happen to you or anyone else?
Waking up this question thread. I'm experiencing the exact same issues - with my i9506 (the LTE+ model). Quite annoying actually even though the problem may seem minute.
Interesting to see that you havd/hade the same problems under JB. I'm seeing the same under KK 4.4.2. Just checked the clock-update on lock screen and for a split of a second, the clock showed the "old time" before it updated. I do not know if i had the same problem before updating to KK (I had the phone only for about a month before it was updated to 4.4.2). Maybe it has to do with some deep sleep policy issue for the Snapdragon chipset as both the i9505 and i9506 have Snapragon. I have reported my observations to my local Samsung customer care centre (which is in Sweden).
Rgds