problems with updating epic to froyo - Epic 4G General

I've been trying all day to get my epic updated to froyo but during recovery installation I keep gettin a message saying E:error in sdcard/update.zip. I've seen a guy on youtube do it and I'm using the same download and did the same steps. It was successful for him. Any help is appreciated

Have you tried searching the forums here? We have at least 2 threads going on about how to install.
Sent from my SPH-D700 using XDA App

yes i have tried the update.zip method and it always fails.

ownagemaximus said:
I've been trying all day to get my epic updated to froyo but during recovery installation I keep gettin a message saying E:error in sdcard/update.zip. I've seen a guy on youtube do it and I'm using the same download and did the same steps. It was successful for him. Any help is appreciated
Click to expand...
Click to collapse
Are you using stock or clockwork recovery? Have you tried the odin method?

using stock. No what is the odin method?

ownagemaximus said:
using stock. No what is the odin method?
Click to expand...
Click to collapse
Head over to the development forum and take a look.
Sent from my SPH-D700 using Tapatalk

Ok trying the method right now. What is the PDA slot? and how does it flash on the device? Do you need root?

ownagemaximus said:
Ok trying the method right now. What is the PDA slot? and how does it flash on the device? Do you need root?
Click to expand...
Click to collapse
Nope
Download the stock TAR file
Put the TAR file in ODIN under PDA
Plug phone in and it should get recognized
Hit start
Cross fingers

[QUOTE=own

ownagemaximus said:
Ok trying the method right now. What is the PDA slot? and how does it flash on the device? Do you need root?
Click to expand...
Click to collapse
The pda slot is a slot in odin...bottom right quarter of the screen....that's wher u put the file, I don't think you need root but I could be wrong
Sent from my SPH-D700 using XDA App

Ownagemaximus: better read a little more about Odin. You don't need root, only to get into download mode. And a word of advice, don't flash anything in the "phone" part. At least it isn't good for us over in fascinate land.
Sent from my ADR6300 using XDA App

No way! It works perfectly!!! Thanks everyone

Related

Need help

Trying to install viper rom on my epic and when I'm in clockwork recovery mode it gives me this error:
E:/ Cant open / cache/ recovery/log
What does this mean? What can i do to resolve this. I keep getting errors when I try to install the rom.
I believe you are in the wrong version of clockwork. For the latest viperRom the cwm needs to be Orange 3.0.0.5
Reroot your phone with one click and try again. It appears your phone has lost root. If that doesn't work their are posts in the viper rom thread that describe a process of going back to stock and working your way to viper rom 4.02b. Another alternative is if you haven't flashed viper rom 4.01 first you might try that.
Sent from my SPH-D700 using XDA App
Dont think that is the problem I cant install any ROM s right now including the stock ROM.
Reflash one click root. It will reinstall clockwork for you and that might fix your issue. If not you might have to use odin to go back to stock. The links for this stuff is in the sticky above.
Sent from my SPH-D700 using XDA App
What v. are you trying to install? Is it ext4? what color is the text (v. #) in cwm?
2sslow said:
What v. are you trying to install? Is it ext4? what color is the text (v. #) in cwm?
Click to expand...
Click to collapse
CWM v2.5.1.0. I'm looking for the how to to use odin to get back to stock now
wtam1100 said:
CWM v2.5.1.0. I'm looking for the how to to use odin to get back to stock now
Click to expand...
Click to collapse
I think where i screwed up real bad is I tried to installed the viper ext 4 b4 actually installing the DK 17 2.8.
wtam1100 said:
I think where i screwed up real bad is I tried to installed the viper ext 4 b4 actually installing the DK 17 2.8.
Click to expand...
Click to collapse
Yeah you need to instal the dk28 modem first. In the epic sticky their is a version of dk28 froyo that you can flash through odin. Try that and then one click root and then instal viper rom.
Sent from my SPH-D700 using XDA App
raylusk said:
Yeah you need to instal the dk28 modem first. In the epic sticky their is a version of dk28 froyo that you can flash through odin. Try that and then one click root and then instal viper rom.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Thanks for the advise got it back to stock now will try again.
wtam1100 said:
Thanks for the advise got it back to stock now will try again.
Click to expand...
Click to collapse
Got that Viper installed now. Thanks for all the help from eveyone. I know so much more about the phone now. Good learning experience even thought it was very stressfull at that time.
wtam1100 said:
Got that Viper installed now. Thanks for all the help from eveyone. I know so much more about the phone now. Good learning experience even thought it was very stressfull at that time.
Click to expand...
Click to collapse
Great news. Glad it worked out for you.
Sent from my SPH-D700 using XDA App
i need help to im stuck in clockwork 3.0.0 and my fone wont turn on can somebody help

Help with AT&t Galaxy Tab

Hey guys. I am in that other download mode with the exclamation and cell and pc image. Is there anyway I can get out from there. I tried searching for the stock firmaware and all but I can not find any.
I have the AT&T versions.
Thanks in Advance.
http://forum.xda-developers.com/showpost.php?p=10302235&postcount=10
It said that this is still a download mode and you can use Odin
So either grab GB Stock Safe from teamovercome site or go to samfirmwares to get a firmware for your device and use Odin to flash it.
priyana said:
http://forum.xda-developers.com/showpost.php?p=10302235&postcount=10
It said that this is still a download mode and you can use Odin
So either grab GB Stock Safe from teamovercome site or go to samfirmwares to get a firmware for your device and use Odin to flash it.
Click to expand...
Click to collapse
Can you give me links please
Sent from my SGH-T989 using XDA App
http://lmgtfy.com/?q=teamovercome
http://lmgtfy.com/?q=samfirmwares
priyana said:
http://lmgtfy.com/?q=teamovercome
http://lmgtfy.com/?q=samfirmwares
Click to expand...
Click to collapse
LOL.. Thanks...
http://www.teamovercome.net/p1000/?page_id=21
But How do I know which modem to download. The restock package is what I have to download, or is that the only thing?
ysuleman said:
LOL.. Thanks...
http://www.teamovercome.net/p1000/?page_id=21
But How do I know which modem to download. The restock package is what I have to download, or is that the only thing?
Click to expand...
Click to collapse
Never Mind figured out what to download.
priyana said:
http://lmgtfy.com/?q=teamovercome
http://lmgtfy.com/?q=samfirmwares
Click to expand...
Click to collapse
Ok I followed the instructions on that website but I am stuck at the At&T logo. Any Ideas?
Try restock again.
It is straight forward Odin. Are you stuck at restock?
priyana said:
Try restock again.
It is straight forward Odin. Are you stuck at restock?
Click to expand...
Click to collapse
Ya I used Odin and followed instruction but it doesn't passt the att logo
Sent from my SGH-T989 using XDA App
I read one guy solve his issue using One Click Unbrick
http://forum.xda-developers.com/showthread.php?t=1153310
care to try that?

Cannot flash stock firmware??

Hey all ive been trying to flash my orginal firmware for my galaxy s4 at&t i337. Ive been using odin 3.07 but I keep having a fail to complete error. It boots up fine and I attempted to root it but it seems like it works but I run root checker and it tells me that it has rooted incorrectly. A lot of other people have been saying that samsung block this exploit in 4.2.2 and im basically screwed till the new update comes out. Ive tried everything, help would be appreciated
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
joearvelo1987 said:
Hey all ive been trying to flash my orginal firmware for my galaxy s4 at&t i337. Ive been using odin 3.07 but I keep having a fail to complete error. It boots up fine and I attempted to root it but it seems like it works but I run root checker and it tells me that it has rooted incorrectly. A lot of other people have been saying that samsung block this exploit in 4.2.2 and im basically screwed till the new update comes out. Ive tried everything, help would be appreciated
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think that's the wrong odin i think it's 1.85 or something like that you need
jaythenut said:
I think that's the wrong odin i think it's 1.85 or something like that you need
Click to expand...
Click to collapse
3.07 works too since it has compatibility with all devices that work with 1.85 and dev recommends to use v3.07...
kingzain900 said:
3.07 works too since it has compatibility with all devices that work with 1.85 and dev recommends to use v3.07...
Click to expand...
Click to collapse
I've tried both and get nothing but a fail here's this mornings attempt on Odin v1.85, if I got the wrong firmware please let me know, I don't think I do though...
joearvelo1987 said:
I've tried both and get nothing but a fail here's this mornings attempt on Odin v1.85, if I got the wrong firmware please let me know, I don't think I do though...
Click to expand...
Click to collapse
You're not supposed to decompress the tar file.
You need to flash the xxxxxxx.tar
kingzain900 said:
You're not supposed to decompress the tar file.
You need to flash the xxxxxxx.tar
Click to expand...
Click to collapse
What do you mean by decompress? Unzipp?
joearvelo1987 said:
What do you mean by decompress? Unzipp?
Click to expand...
Click to collapse
Exactly
sajlence said:
Exactly
Click to expand...
Click to collapse
No good, different fail error this time. Fail(auth) ??
joearvelo1987 said:
No good, different fail error this time. Fail(auth) ??
Click to expand...
Click to collapse
Were you on mf3 firmware? If you were Odin is not going to work

Helpp Stuck in odin mode!

hello, i need help i was on negalite rom but with the new mj4 update and i was trying to go back to MDL and when i did that it said fail then it stays stuck in odin mode and says connect to Kies and "emmc burst mode enabled" any help please!
Download the mf9 tar and flash that in odin.
The tar can be downloaded from here
http://forum.xda-developers.com/showthread.php?p=43879875
Sent from my SPH-L720 using XDA Premium 4 mobile app
mikel719 said:
Download the mf9 tar and flash that in odin.
The tar can be downloaded from here
http://forum.xda-developers.com/showthread.php?p=43879875
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the 1.7 gb file? full restore?
or the 61 mb one? i tryed the mdc restore and it fails when i reaches sboot.bin
does it matter if it says emmc burst mode enabled? "/
cris_epic said:
hello, i need help i was on negalite rom but with the new mj4 update and i was trying to go back to MDL and when i did that it said fail then it stays stuck in odin mode and says connect to Kies and "emmc burst mode enabled" any help please!
Click to expand...
Click to collapse
Hopefully you are not in the same boat I am in. Don't try to Odin another Rom it will not work. Try to Odin CF Auto root. That worked for me until my phone stopped responding to anything. If that doesn't work you are with me which is in purgatory. No way out at this present time.
mikel719 said:
Download the mf9 tar and flash that in odin.
The tar can be downloaded from here
http://forum.xda-developers.com/showthread.php?p=43879875
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
crawrj said:
Hopefully you are not in the same boat I am in. Don't try to Odin another Rom it will not work. Try to Odin CF Auto root. That worked for me until my phone stopped responding to anything. If that doesn't work you are with me which is in purgatory. No way out at this present time.
Click to expand...
Click to collapse
weird i left battery out and it booted when i turned on miracle lol
cris_epic said:
weird i left battery out and it booted when i turned on miracle lol
Click to expand...
Click to collapse
Thank goodness. I have tried everything to get mine working and am dead. I am going to try leaving the battery out all night and will give it another go in the morning. Glad you got yours back:good:
crawrj said:
Thank goodness. I have tried everything to get mine working and am dead. I am going to try leaving the battery out all night and will give it another go in the morning. Glad you got yours back:good:
Click to expand...
Click to collapse
wait though when i enter download mode to use the MDC stock Restore odin program it fails? why is that?
how can i unroot to stock if im on negalite rom with the latest MJ4 firware installed?
cris_epic said:
wait though when i enter download mode to use the MDC stock Restore odin program it fails? why is that?
how can i unroot to stock if im on negalite rom with the latest MJ4 firware installed?
Click to expand...
Click to collapse
Yeah that is what I was saying. Don't try to Odin any other stock roms it won't work. Once you are on MJA you are locked out of Odin with the exception of recovery. Your only option to get back to stock is to wait for a working zip that you can install via recovery.
crawrj said:
Yeah that is what I was saying. Don't try to Odin any other stock roms it won't work. Once you are on MJA you are locked out of Odin with the exception of recovery. Your only option to get back to stock is to wait for a working zip that you can install via recovery.
Click to expand...
Click to collapse
ohh ok so that explains the "Kernal is not SEANDROID enforcing"
"SET WARRANTY BIT= KERNAL"
well i wanted to SIM unlock my phone since im going to guatemala but i guess i cant change modem either right? even if i flash zips through recovery? you have skype or yahoo msger so we talk about it? like what are our options right now
cris_epic said:
ohh ok so that explains the "Kernal is not SEANDROID enforcing"
"SET WARRANTY BIT= KERNAL"
well i wanted to SIM unlock my phone since im going to guatemala but i guess i cant change modem either right? even if i flash zips through recovery? you have skype or yahoo msger so we talk about it? like what are our options right now
Click to expand...
Click to collapse
Once your on mja update, you basically have no options now really. Your stuck with what you have.
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Once your on mja update, you basically have no options now really. Your stuck with what you have.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
yeah i noticed it doesnt let me restore backups either lol
umm so what is our hope that devs are working on?
We have another member in this club...
Tried everything to get back up and running... No go...
Hope the zip is available soon...
cris_epic said:
yeah i noticed it doesnt let me restore backups either lol
umm so what is our hope that devs are working on?
Click to expand...
Click to collapse
fgr said:
We have another member in this club...
Tried everything to get back up and running... No go...
Hope the zip is available soon...
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2506562
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Try this
http://forum.xda-developers.com/showthread.php?t=2506562
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Great find! It worked for me.
Thanks given.

[Q] Help Please, stuck in odin mode and "software not recognized by AT&T "

[Q] Help Please, stuck in odin mode and "software not recognized by AT&T "
So I got a new phone and I thought that this would be a great opportunity to learn how to do things on my own with my phones, Lucky me my new phone (Nexus 5) is way easier to root and do the fun stuff... but not my Galaxy S4
trying to odin back to stock I got stuck in Download mode and later i got a msg saying "Software not recognized by AT&T was found in your device" and on the top line in red said "Secure Fail: Kernel"
How can I flash the kernel and the new recovery ?
remember I am a Noob trying to learn, so go easy on me
What file were you trying to flash with odin? Do you have a link? Also, what firmware version was your phone on? The version you're trying to flash in Odin had to be at least as new as what your phone was on.
Sent from my Nexus 5 using XDA Free mobile app
The boot loader is locked. This means that the stock recovery and kernel cannot be replaced. Also, you cannot Odin flash firmware that contains a boot loader with a lower version than the one you are currently running.
jd1639 said:
What file were you trying to flash with odin? Do you have a link? Also, what firmware version was your phone on? The version you're trying to flash in Odin had to be at least as new as what your phone was on.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
jmjoyas said:
The boot loader is locked. This means that the stock recovery and kernel cannot be replaced. Also, you cannot Odin flash firmware that contains a boot loader with a lower version than the one you are currently running.
Click to expand...
Click to collapse
hey guys I was trying to flash the Pit file and the AP file, took me a few tries but the phone is up an running again, it is a little laggy tho, i feel like it just needs to be updated now ... might root it again and odin back to stock because i feel like theres something i did wrong but can't figure out why, if i brick it its fine, this is my "Guinea Pig Phone" because i am trying to learn about root and all ( Yes i am a noob ) I've been "studying" for about 2 month now
oh and Yes i made sure it was the right files for my AT&T Samsung Galaxy S4 SGH-I337
Brunolarogian said:
hey guys I was trying to flash the Pit file and the AP file, took me a few tries but the phone is up an running again, it is a little laggy tho, i feel like it just needs to be updated now ... might root it again and odin back to stock because i feel like theres something i did wrong but can't figure out why, if i brick it its fine, this is my "Guinea Pig Phone" because i am trying to learn about root and all ( Yes i am a noob ) I've been "studying" for about 2 month now
oh and Yes i made sure it was the right files for my AT&T Samsung Galaxy S4 SGH-I337
Click to expand...
Click to collapse
What firmware version are you on and why are you flashing a pit file? Don't flash the pit.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
What firmware version are you on and why are you flashing a pit file? Don't flash the pit.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Like I mentioned earlier I am trying to learn and one of the links I found told me to flash both PIT and AP
after i finally made it work, my version was back to touchwiz and android 4.2.2
Brunolarogian said:
Like I mentioned earlier I am trying to learn and one of the links I found told me to flash both PIT and AP
after i finally made it work, my version was back to touchwiz and android 4.2.2
Click to expand...
Click to collapse
If it's running show I would flash the mdl firmware again without the pit file. Then root it with motochoper and put twrp on it. Then flash a custom rom.
http://forum.xda-developers.com/showthread.php?p=41892523
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If it's running show I would flash the mdl firmware again without the pit file. Then root it with motochoper and put twrp on it. Then flash a custom rom.
http://forum.xda-developers.com/showthread.php?p=41892523
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
MDL file or md5? just in case I have the wrong file, do you have a link for the correct one by any chance?
Brunolarogian said:
MDL file or md5? just in case I have the wrong file, do you have a link for the correct one by any chance?
Click to expand...
Click to collapse
Go to sammobile.com for mdl, 4.2.2, firmware
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Go to sammobile.com for mdl, 4.2.2, firmware
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Awesome... thank you, Brother
I'll try that as soon as I leave work and get home, if you don't mind, can I keep asking you a few questions later on when I'm doing it ?
I'm actually really interested and excited to learn all this
Brunolarogian said:
Awesome... thank you, Brother
I'll try that as soon as I leave work and get home, if you don't mind, can I keep asking you a few questions later on when I'm doing it ?
I'm actually really interested and excited to learn all this
Click to expand...
Click to collapse
I'm on xda frequently so I'll be around
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
I'm on xda frequently so I'll be around
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
You sir are THE MAN .... it worked, it's back to normal =]
BruKnowsBest said:
You sir are THE MAN .... it worked, it's back to normal =]
Click to expand...
Click to collapse
Glad you got it working
Sent from my Nexus 5 using XDA Free mobile app

Categories

Resources