[Q] 3G mobile internetz does not work.... seriously - HD2 Android Q&A, Help & Troubleshooting and Genera

Hey everyone.
I'm using European Version HD2:
WinMo: Latest chucky lite rom
Android: Latest Cyanogen based Build (hyperdroid 1.7) with alternative Hastarin 8.5 (oldcam) kernel and Latest Radio (2.15.50)
So...
I'm satisfied with stability (no issues except one I'm asking about).
But...
3G/Edge/anyInternetz just does not work... Checked the APN settings and they're the same as in WinMo (in WinMo this thingie DOES work).
maybe i'm Doin' something wrong: Disable wifi, enable data, enable 3G... It just does not connect, and, apparently when I try to use connection (being precise: the lack of it) somehow it says that there is no internet on the device.
The history was: winmo:3.14(rus)+latest radio+HypDr1.7->Chucky+L.R.+HypDr1.7 and I only used mobile internetz recently, because I tweaked this build over WiFi, and so forgot to check if it worked in any configuration
Any suggestions? I'd really appreciate it because its only 1 thing in this cmbo that does not work (battery is fine and kernel terminated screen freezes), Thank YOU!!
If you need any additional info, you'll get it
UPD: Checked with another sim from different carrier, same result
UPD: Tried the workaround with empty apn, didnt work also

must be a problem with Radio or wimo most builds have a stable 3g conecction im using phiremod with no 3g problems.
my Radio is 2_12_50_02_2 and wimo ChuckyDroidROM.

I used MDJ froyo sense clean some time earlier with 2.15 radio and it was fine =(

dammit fellas :O
Reflashed to 2.12 Radio just to be sure, same situation, I'm almost 100% sure something is wrong with some other related options in android, can anyone tell me where to check them and, better, how to set them up correctly. Heard something about *#*#4636#*#*, will be good if anyoune could tell me anything about it

gear_rus said:
Reflashed to 2.12 Radio just to be sure, same situation, I'm almost 100% sure something is wrong with some other related options in android, can anyone tell me where to check them and, better, how to set them up correctly. Heard something about *#*#4636#*#*, will be good if anyoune could tell me anything about it
Click to expand...
Click to collapse
Obviously you will dance or you can and find that the song isn't ending...and then you will start playing with the kernels.....

gear_rus said:
Hey everyone.
I'm using European Version HD2:
WinMo: Latest chucky lite rom
Android: Latest Cyanogen based Build (hyperdroid 1.7) with alternative Hastarin 8.5 (oldcam) kernel and Latest Radio (2.15.50)
So...
I'm satisfied with stability (no issues except one I'm asking about).
But...
3G/Edge/anyInternetz just does not work... Checked the APN settings and they're the same as in WinMo (in WinMo this thingie DOES work).
maybe i'm Doin' something wrong: Disable wifi, enable data, enable 3G... It just does not connect, and, apparently when I try to use connection (being precise: the lack of it) somehow it says that there is no internet on the device.
The history was: winmo:3.14(rus)+latest radio+HypDr1.7->Chucky+L.R.+HypDr1.7 and I only used mobile internetz recently, because I tweaked this build over WiFi, and so forgot to check if it worked in any configuration
Any suggestions? I'd really appreciate it because its only 1 thing in this cmbo that does not work (battery is fine and kernel terminated screen freezes), Thank YOU!!
If you need any additional info, you'll get it
UPD: Checked with another sim from different carrier, same result
UPD: Tried the workaround with empty apn, didnt work also
Click to expand...
Click to collapse
Does it connect at all, even for 2 seconds?
go to website of your carrier and get the settings.
If not, get back here - we sort it for you.
matt

tried "data_conn=ppp" in your startup.txt ??

yea sounds like he may be using an RMNET build with Hastarin's Kernel which is PPP

Thx for the replies... finally
1st: I've started playing with kernels and foundout that Hastarin 8.5.1 oldcam IS indeed (incompatible??) causing trouble with Internet
2nd:I went to the web site somewhere between 2nd or 3rd day of my soul searching But settings were the same, and i tried creating a new apn and setting it for default, and NO, It does NOT connect at all..
3rd: No, I haven't, will try, thanks
4th: Why is this an RMNET build if on its page it says: "Known Issues: Dropped Mobile Data Connections due to buggy PPP" then i'd assume it HAS the ppp and not RMNET, cuz this word was not found in this page by Opera
And again, help is much apreciated

mofoahh said:
tried "data_conn=ppp" in your startup.txt ??
Click to expand...
Click to collapse
does it need "set cmdline"? I will try assuming it does, til you answer, thanks again=)

Tried this cmdline, stuck on the screen which shows up after "Jumping to kernel" and says guess what? "htc" Idk, but when i tried to change wifi mac with set cmdline "wifi.mac=12:34:56:78..." it did the same: never boot

Related

Problem with data connection on different build

Hello every body,
I have try this week to install differents builds on my hd2 and i have problem with data connection.
I have try shubcraft rom, darkstone V2 and mattc last build and each time i have the same problem
Using the ppp version: the 3G icon appear but don't obtain any connnection. The arrows aren't moving at all.
Using the Rmnet version: no icon, no connection.
I was (and still) using shubcraft 1.4a (I think), no problem with internet. The bug appear with newer version.
As of WM I'm using ChuckyDroidROM and Radio 2.10.50.26.
I'm sorry to post a thread for this subject but I m searching for about 2 hours on forum and the only thing i have found it's other post of people encountring the same problem without any help.
Thank in advance
Ok... I wasn't searching in the good forum... I haven't seen this one
Thanks to the modo who moved my thread !
Anyway, i have found the solution:
Message form sylau 90 in an other thread:
Firstly, what I suggest is go to setting> WIRELESS&NETWORKS > MOBILE NETWORKS > then, check whether the DATA ENABLED already tick or not(if not,just tick it)...
Second,in case the first step not working even after you ticked it...then now you go back to the MOBILE NETWORKS again...choose ACCESS POINT NAMES...and then make sure you choose the correct access point(which must be the same name with the one when you using WINMO)...
Hope these help...Cheers...
Click to expand...
Click to collapse
It's the second part which works for me!
This thread can be closed

Absolutely NO data connection (umts) - What am I doing wrong? :(

Hey out there!
I´ve posted this questions an hour ago in the MDJ Build Thread, but due to the fact that i´ve tried darkstone ROM within the last minutes and my problem also occurs here too, makes me think that this is a fundamental (radio, winmo, whatever) problem and it belongs here! I hope my doublepost is forgiven
-->
brooon said:
Hey!
I´m just new here in the Android community, so please be a little patient with me
I am using this ROM since yesterday and i´m really impressed by the stability and the look of this Rom, so congrats to the dev first!
BUT: I do have a strange problem and I´m not able to find the solution myself...
--> I can´t get a data connection, no matter how hard I try to get one
My config:
Android
* MDJ FroYo Sense Revolution v.1.6
* Kernel S6 (on which i´ve just updated because I thought this could bring life into my browser )
* HSPL2 (SPL Version 1.42.HSPL)
Click to expand...
Click to collapse
Windows Mobile:
* OS: 5.2.21869 (21869.5.0.82)
* Manila: 2.5.20113224.0
* ROM: 1.72.162.0 (82124)
* RADIO: 2.15.50.14
Click to expand...
Click to collapse
Any ideas? Thanks in advance
Click to expand...
Click to collapse
Have you checked your APN settings? Google is your friend for finding the correct settings, and that's usually the culprit for no data.
If in doubt about APN's then delete them and restore from default (menu button) that works for me.
Mind you I still get annoying dropped connections all the time, but thats a know PPP(?) error.
GG
Thanks for your answers!
johncmolyneux said:
Have you checked your APN settings? Google is your friend for finding the correct settings, and that's usually the culprit for no data.
Click to expand...
Click to collapse
Yes i´ve checked the APN settings...everything is correct here. One interesting point that I forgot to mention is the fact that according to the settingsmenu there is a connection...but neither browsing nor any other webbased application works.
GodsGift said:
If in doubt about APN's then delete them and restore from default (menu button) that works for me.
GG
Click to expand...
Click to collapse
That´s what I have done too...problem is still there
hello
im having the same issues as well tried. ive run madejee sense clean, and bluetopia roms and had the issue with both. apn is setup. data shows connection but will not connect to internet or anything
i just updated to the latest kernel
that seemed to help data
maybe a good idea to try?
nope, like said in the first post, i´m on the newest recommended Kernel (S6)
Did you reset the phone after restoring the APN's?
GG
unfortunately...yes...
very strange...seems like there are not many users with same problem?! Could it be the Radio or s.th.?!
you tried changing your startup.txt to conn_type=rmnet over ppp??
yes try upgrading your radio also.
got same problem with CleanSense from MDJ and all s# kernels
did my own thread but no one answered
Data conection works for me only on HyperDroid 1.7 but battery drain in there is a big 'no no'
Any solution yet?
data drop: try this http://forum.xda-developers.com/showthread.php?t=824413
APN issues: check the setting.
TMOUS data package: try call 611 to ask for a change to android data package.
No data Connection....
I had the same problem with android
Some Questions and some answers ;-)
Did you set up Data Connection in Windows Mobile?
Are you in Flight Mode in Windows Mobile?
1st: Try to establish a data connection in Windows Mobile then boot your Android Device.
2nd: verify your APN settings in Android
3rd: don´t set the phone in Windows Mobile to flight mode.
4th: try a different Radio ROM
teamrf said:
4th: try a different Radio ROM
Click to expand...
Click to collapse
Thanks for all your answers guys!! I will go through every point...which Radio would you recommend?
brooon said:
Hey out there!
I´ve posted this questions an hour ago in the MDJ Build Thread, but due to the fact that i´ve tried darkstone ROM within the last minutes and my problem also occurs here too, makes me think that this is a fundamental (radio, winmo, whatever) problem and it belongs here! I hope my doublepost is forgiven
-->
Click to expand...
Click to collapse
I just ran the FroYo 1.6.S3.1 build and I'm having the same issue.
This is the first build I've had a problem with, both Mdeejay_eVo and Mdeejay S4 worked fine.
Where can I dl the latest kernal?
OH DEAR... a hint...
Is it possible, that the RADIO has crashed this function? --->
I have have flashed a new Radio yesterday (2.15.50) and now I´ve realized, that I can´t set up a connection under WM as well! Now I´ve flashed on Duttys WM ROM...same issue, no Internet Connection.
Any ideas??
Same issue here... I tried the operator's settings but same and same issue always.... I'm on mdeejay revolution 1.6. I suppose nobody's got a fix ? =/
I dont know if that help but i think someone could check differences between Hyperdroid 1.7 build (or kernel inside) and for ex. CleanSense and S-type kernel from mdjs
Sent from my HTC HD2 using XDA App
Edit: ok i found a difference : on all latest ppp builds cant get data connection, rmnet builds works like charm.
im having the exact same issue. im using an energy rom for wm.. wich i love. and just loaded froyostone sense 3.2 and it shows i have a connection but everything says i dont. im realy new to this and this site has helped me learn things that i didnt think was possible but im stuck now

No gsm internet in android

Hey guys,
I have a tmobile htc hd2 with hyperdroid 1.7. I recently upgraded from 1.6 to 1.7 and i initially noticed some instability in the gsm internet. Now it wont work at all. I have the apn set to epc.tmobile.com. It work in windows which also has it set to epc.tmobile.com. I also recently did the orientation fix from http://forum.xda-developers.com/showthread.php?t=803242
I thought maybe that could have been the culpret but i copied the origional hyperdroid files (zimage, cifs.ko,tun.ko,bcm4329.ko) and it still didn't fix it. And honestly i cant remember if the internet work before i did the orientation fix or not.
Tech specs of phone;
android 2.2.1
kernel: 2.6.32.15r8.2-gb9e0all
bb: 15.42.50.11U_2.15.50.14
Thanks in advance for your time and help.
I got the same problem, any deas?

[Help]HD2 flashed any mango, but still can't connet the 3G or EDGE?

I bought HD2 which was flashed Android first, now I get the new 23.Langs_HD2_Pdaimatejam_Rom_Wp7.5_mango_7.10.8107.79_v6 for my HD2, after I fill the APN and using the connetion setup, I still can't use the EDGE or 3G network, however the Wifi or USB mode works fine. Then I changed any 7740 and 8107 rom from Pdaimatejam, the problem is still there, as I can see Radio Hardware 0.0.0.0, I'll be appreciated if anyone could help me on the problem.
My HD2 is producted in 8 April 2011 for sale in Porland.
Thanks for any help.
Use the HTC connection Setup and this will installed the proper APN, if you doesn't know it.
totalcmdext said:
Use the HTC connection Setup and this will installed the proper APN, if you doesn't know it.
Click to expand...
Click to collapse
Yes, I used the HTC Connection Setup, but still not work.
My Radio is 2.15.50.14
Anything works fine in Android.
I can find the "Security Unload" on the top of the three color screen.
2.08 HSPL yet.
Sorry for my pool english, hope you can understand what I mean.
Pdaimatejam_Rom v6.5 is latest version and corrected some bugs from v6.... soon be released v7.
remove installed Connection Setup from phone, restart phone and install new version from HTC section in Marketplace. run Connection Setup and setup connection (try manual mode). when finish add APN manually and restart device
i newer have this problem and always do on this way...
nbfrank said:
I bought HD2 which was flashed Android first, now I get the new 23.Langs_HD2_Pdaimatejam_Rom_Wp7.5_mango_7.10.8107.79_v6 for my HD2, after I fill the APN and using the connetion setup, I still can't use the EDGE or 3G network, however the Wifi or USB mode works fine. Then I changed any 7740 and 8107 rom from Pdaimatejam, the problem is still there, as I can see Radio Hardware 0.0.0.0, I'll be appreciated if anyone could help me on the problem.
My HD2 is producted in 8 April 2011 for sale in Porland.
Thanks for any help.
Click to expand...
Click to collapse
Many guys have the same trouble as you!!!
The hardware radio version is “0.0.0.0”!
dxdy said:
Pdaimatejam_Rom v6.5 is latest version and corrected some bugs from v6.... soon be released v7.
remove installed Connection Setup from phone, restart phone and install new version from HTC section in Marketplace. run Connection Setup and setup connection (try manual mode). when finish add APN manually and restart device
i newer have this problem and always do on this way...
Click to expand...
Click to collapse
I tried V6.5 or V4, but still not work.
I think it caused by the radio hardware problem?
yjliang01 said:
Many guys have the same trouble as you!!!
The hardware radio version is “0.0.0.0”!
Click to expand...
Click to collapse
Thanks, but any ways for this problem now?
I have the same problem!!!
Hi there,
I am also one of the Lucky & unlucky owner of an awesome HTC HD2. Lucky because well it rocks in Android, unlucky because it doesnt detect Edge/GPRS on my WP Mango.
I have detailed the problems in this post - http://forum.xda-developers.com/showthread.php?t=1443520
Would bve great to hear your thoughts. My hardware radio version says 0.0.0.0.
So well, what gives? By the way is your HD2 a T-Mobile verison? Because myin is.
I have this issue aswell, here's my ABOUT info http://i.imgur.com/B0cjP.jpg
Update: Adding my carrier's APN Fixed everything. EU HD2 from italy.
aarmath said:
Hi there,
I am also one of the Lucky & unlucky owner of an awesome HTC HD2. Lucky because well it rocks in Android, unlucky because it doesnt detect Edge/GPRS on my WP Mango.
I have detailed the problems in this post - http://forum.xda-developers.com/showthread.php?t=1443520
Hi, aarmath, my HD2 is htc version which is 512M rom, but has "Security unlocked" on the top of the 3 color screen, i dont know what does that mean? Is it the problem? I redo the hspl to 2.08, but still the same problem. Radio hardware 0.0.0.0, it make me very sad.
Would bve great to hear your thoughts. My hardware radio version says 0.0.0.0.
So well, what gives? By the way is your HD2 a T-Mobile verison? Because myin is.
Click to expand...
Click to collapse
Sent from my NexusHD2 using XDA App
keller112 said:
I have this issue aswell, here's my ABOUT info http://i.imgur.com/B0cjP.jpg
Update: Adding my carrier's APN Fixed everything. EU HD2 from italy.
Click to expand...
Click to collapse
Thanks keller112, your problem is the missing APN, as you have the A.102.0.D4 radio hardware per your attached pic. But we only could see the radio hardware 0.0.0.0 which maybe the problem. I've flashed three different Rom but still not work.
I've no idea about this problem now, anyone could help?
I have been having the same problem as well... I've tried reflashing 3 times through the entire process that was shown on the youtube video.
And has anyone also been having a problem where different apps wont open at all? I tried reseting and it worked for a bit but it seems if I change anything in the "advanced config" next time my phone boots up everything gets messed up and the theme is erased. SO FRUSTRATING hahaha
Aah, so yours is also a T-Mobile HD2. That means we will have to bank on Ansar's software radio driver that he has created for T-Mobile HD2s. Here's the link - http://forum.xda-developers.com/showthread.php?t=1111613
But let me caution you - I have not tried it because I simply don't have the courage/stamina to do the whole process of installing the Windows Phone OS on my HD2. I might do it someday ;-)
But not right now....
---------- Post added at 06:22 PM ---------- Previous post was at 06:21 PM ----------
nbfrank said:
Sent from my NexusHD2 using XDA App
Click to expand...
Click to collapse
Aah, so yours is also a T-Mobile HD2. That means we will have to bank on Ansar's software radio driver that he has created for T-Mobile HD2s. Here's the link - http://forum.xda-developers.com/show....php?t=1111613
But let me caution you - I have not tried it because I simply don't have the courage/stamina to do the whole process of installing the Windows Phone OS on my HD2. I might do it someday ;-)
But not right now....

[Q] How To Tell if Wifi Is Dead Or Dieing?

Hello XDA,
Love all the work that has been put into this site and the HD2, I've been a long time lurker and finally decided to make an account. I am having an issue with my wifi and it looks like it maybe hardware related but I am not sure how to confirm it.
My issue is when I try to connect to a network it will show my network but with only the circle of the WiFi icon lite up none of the bars ever light up anymore. When I connect to it, it will just go instantly to saved not in range, I have tried 3 different android ROM builds and I get the same message. 2 from nand, another from native sd. I have also tried installing the wifi fix (#9434#) that was mentioned on the nexus HD2 JellyBean 4.2.2 forum by tytung but no luck.
This all started when I was trying to install a new rom from my ics 4.04 nand install to a native sd rom setup but I had messed it up and accidentally removed cwr from nand. I eventually got it working and installed native sd but wifi wouldn't work so I reinstalled ics on nand thinking it was an issue with the rom but it also didn't work.
I am now running windows mobile 7.8 following the below guide and it is also only able to scan for the network but when it tries to connect it says the phone couldn't reach the wifi network, I am only a few steps away from the router. Its not my wifi because my laptop, ipad, iphone and I have tried it at work.
http://forum.xda-developers.com/showthread.php?p=25781675#post25781675 -
I have tried serach google, the forums youtube but no one has a similar issue that I have, I am not sure what else to do but it doesn't look like it is a software issue (assuming mengfei's guide wipes everything from nand). Is there any way to be sure and confirm it is a hardware issue? or could it just be the wifi chip's antenna?
Here's some more specs/info
HD2 t-mobile 1024 - bought refurbished from t-mobile 2011, working fine from day 1
OS - I tested on
Win 7.8 - Dynamics_HD2O_HD2_2_21_Eastern
Native SD - NexusHD2-JellyBean" android™ HD2 rom/build
NexusHD2 ICS CM9" android™ HD2 rom/build -
Wifi - wpa2-psk
Radio - 2.15.50
magdlr v1.13
Please let me know what you think and if I should buy a new wifi chip and replace it. Thanks in advanced for any info you guys can provide.
-Laughin9M4N
Hi! very sorry for your issue
I can suggest you to install again the radio, maybe your issue is related to it...
if it fails, try to install the latest stock rom and check if the wifi works with that...
lukes91 said:
Hi! very sorry for your issue
I can suggest you to install again the radio, maybe your issue is related to it...
if it fails, try to install the latest stock rom and check if the wifi works with that...
Click to expand...
Click to collapse
Okay, I will try to re-install the radio again. Should I try a specific version? or stick with the 2.15.50 version. Also what do you mean stock rom? Do you mean windows mobile 6.5 or any Android build? Thanks for your reply.
Yes, try 2.15.50.14 radio.
And yes again, i mean 6.5 WM Stock rom.
Let us know
Sent from my HTC One X using xda app-developers app
Warning to all TMOUS HD2 owners you can not flash a 2.04,50.xx, 2.05.50.xx, or any x.xx.51.xx version radio to your HD2.This includes radio ROM version that are included in a ROM. These radio versions will brick/ KILL a TMOUS HD2!!!!!
Click to expand...
Click to collapse
Just a reminder
I haven't had a chance to revert to stock 6.5 yet but I did try re flashing the radios 2.10.50 and 2.15.50 again and no luck. Also how can I check if the radio version changed? On the rainbow screen none of the values changed it was always,
pb81120 hx-b3
spl-2.08 HSPL 8g xe
0x05
CotullaHSPL 0x50
I will post back once I downgrade.
Laughin9M4N said:
I haven't had a chance to revert to stock 6.5 yet but I did try re flashing the radios 2.10.50 and 2.15.50 again and no luck. Also how can I check if the radio version changed? On the rainbow screen none of the values changed it was always,
pb81120 hx-b3
spl-2.08 HSPL 8g xe
0x05
CotullaHSPL 0x50
I will post back once I downgrade.
Click to expand...
Click to collapse
Once you successfully flash without errors, the radio has changed. The values on the "rainbow" screen will not change unless you change your SPL.
I have downgraded down to win mobile 6.5 and I notice that it connects when I am right next to the wifi (changed power setting to best performance) but when I walk away or to another room I will lose the signal.
I believe this issue is due to the hardware maybe the antennaes are damaged? Unless there is anything else I can try I am going to look into buying a wifi chip and antennae set. Does anyone have any suggestions?
Laughin9M4N said:
I have downgraded down to win mobile 6.5 and I notice that it connects when I am right next to the wifi (changed power setting to best performance) but when I walk away or to another room I will lose the signal.
I believe this issue is due to the hardware maybe the antennaes are damaged? Unless there is anything else I can try I am going to look into buying a wifi chip and antennae set. Does anyone have any suggestions?
Click to expand...
Click to collapse
mmmhhh... i fear it's damaged... hope someone more expert will help you
Laughin9M4N said:
I have downgraded down to win mobile 6.5 and I notice that it connects when I am right next to the wifi (changed power setting to best performance) but when I walk away or to another room I will lose the signal.
I believe this issue is due to the hardware maybe the antennaes are damaged? Unless there is anything else I can try I am going to look into buying a wifi chip and antennae set. Does anyone have any suggestions?
Click to expand...
Click to collapse
perhaps changing your wifi channel might help, eg 13
Robbie P said:
perhaps changing your wifi channel might help, eg 13
Click to expand...
Click to collapse
Sorry doesn't change anything, and none of my other wifi devices are affected. I am now on android ics 4.0.4 ( NexusHD2-ICS-CM9-HWA_V3.0) and it still has the same issue when I put the phone right next to my router it will have 2-3 bars but as I walk away it drops and then if I leave the room it will completely lose the signal while all my other wifi devices are working fine. I will be installing a native sd build soon and this pretty much leaves me with the conclusion that the antenna or chip is damaged some how.
Anyone know a good source to buy the chip? I am guessing ebay.
Edit:
I think I found something that may solve the issue
http://forum.xda-developers.com/showthread.php?t=1190180
I remember dropping my phone a bunch of times, it is in a plastic case protector but it could be that my antenna got loose somehow.

Categories

Resources