do i use the 512.pit file and the jk6 tar when "odin"ing JK6? thx
roguly said:
do i use the 512.pit file and the jk6 tar when "odin"ing JK6? thx
Click to expand...
Click to collapse
I don't think you need it.
I first used the PIT and the TAR and it said it was successful but then the phone didn't boot and I got the phone and pc pic at bootup.
Related
Hello
I'm trying to flash the jpu modem on stock jpy since I had good results with it. I don't really know where to get it correctly. I've found a jpu modem in the doc rom thread, but it's some zip file, i took the modem.bin file out and just made a TAR out of it. seems other modem tar files include just that.
But i don't know if it's correct.
And I'd welcome info on how to flash it, should I put it in the phone field?
Since this is a great way to brick a phone, I'd like some advice on this matter.
Thank you.
You can use heimdal and just flash the modem.bin directly
Sent from my GT-I9000 using Tapatalk
creat0r79 said:
And I'd welcome info on how to flash it, should I put it in the phone field?
Click to expand...
Click to collapse
Don't put it in a TAR file. Just flash the modem.bin directly. Put it in the "PHONE" box. Make sure Repartition is unchecked and no other fields are filled.
After it's done, go to About to verify it flashed correctly. (Look at Baseband)
Done, running JPU modem on stock JPY...seems to also boot faster now
Thank you.
Hi
I am new to Flashing .. Do I need to do Factory Reset even for flashing only the modem.bin file or not..pls reply.
creat0r79 said:
Hello
I'm trying to flash the jpu modem on stock jpy since I had good results with it. I don't really know where to get it correctly. I've found a jpu modem in the doc rom thread, but it's some zip file, i took the modem.bin file out and just made a TAR out of it. seems other modem tar files include just that.
But i don't know if it's correct.
And I'd welcome info on how to flash it, should I put it in the phone field?
Since this is a great way to brick a phone, I'd like some advice on this matter.
Thank you.
Click to expand...
Click to collapse
The .zip file in Doc's thread is meant to be flashed through recovery (CWM or 2e). But I guess flashing through Odin worked for you, so all's well.
cs_k said:
Hi
I am new to Flashing .. Do I need to do Factory Reset even for flashing only the modem.bin file or not..pls reply.
Click to expand...
Click to collapse
not required
seltaeb said:
The .zip file in Doc's thread is meant to be flashed through recovery (CWM or 2e). But I guess flashing through Odin worked for you, so all's well.
Click to expand...
Click to collapse
they r not flashing .zip they are flashing modem.bin in ODIN. It works.
I am wanting to flash EB13 back and make everything stock.
Question is I have the EB13.tar.md5 files, and I will use Odin with that in the PDA section.
What PIT file do I use with that or does it not matter. I have the one that came with Odin as well as s1_odin_20100512.pit
I just dont know what the pit file does and if it needs to be paired with other files correctly.
Thx,
Force
When flashing a full tar file pit is not needed. Just pit the tar in PDA and make sure reboot is the only thing checked on the left side and hit Start. Should take like 3-5 mins total
Sent From My Evo Killer!
I have an S4 with TWRP 2.6 + CyanogenMod 10.1.3, and CF Autoroot.
I wanted to start over again, so I went into TWRP and rest everything.
Now it won't boot.
I can get into download and recovery (TWRP is somehow still present)
The pieces are here. What I'd like to do is somehow nuke all aftermarket mods, and start over.
So, how do I get it to boot up?
Go back into twrp and flash the rom again.
Sent from my SPH-L720 using Tapatalk now Free
hotspace said:
Go back into twrp and flash the rom again.
Sent from my SPH-L720 using Tapatalk now Free
Click to expand...
Click to collapse
The ROM isn't present. All data was nuked.
So apperently recovery is gone, and now I can get into stock recovery.. but it has a red tri-angle. WHat do?
This will get you back to stock.
http://forum.xda-developers.com/showthread.php?t=2357471
http://forum.xda-developers.com/showthread.php?t=2303917
Head over to that thread and find the stock ROM. Your going to have to ODIN back to stock.
So long as I can get into recovery or download, my device isn't screwed, right?
hotspace said:
http://forum.xda-developers.com/showthread.php?t=2303917
Head over to that thread and find the stock ROM. Your going to have to ODIN back to stock.
Click to expand...
Click to collapse
Odexed? Which one?
Mansevolver said:
So long as I can get into recovery or download, my device isn't screwed, right?
Click to expand...
Click to collapse
That seems to be the general concensus.
When you can't get to download and recovery, then you're screwed.
Odexed is the way the phone comes out of the box.
Deodexed allows you to add themes and other mods, I think.
Not super sure on that.
ObrienDave said:
That seems to be the general concensus.
When you can't get to download and recovery, then you're screwed.
Odexed is the way the phone comes out of the box.
Deodexed allows you to add themes, I think.
Not super sure on that.
Click to expand...
Click to collapse
Alright. I have the Odexed one. it's a .tar.rar. I simply go into download mode, throw the file into PDA on ODIN, and flash?
Mansevolver said:
Alright. I have the Odexed one. it's a .tar.rar. I simply go into download mode, throw the file into PDA on ODIN, and flash?
Click to expand...
Click to collapse
Extract the .tar file from the .rar
Do not extract anything from the .tar
Flash the .tar in PDA mode.
Be patient after reboot.
Can take quite a while for the system to rebuild.
ObrienDave said:
Extract the .tar file from the .rar
Do not extract anything from the .tar
Flash the .tar in PDA mode.
Be patient after reboot.
Can take quite a while for the system to rebuild.
Click to expand...
Click to collapse
What program for extracting? In my Downloads, it's just a white page. No extract option.
Mansevolver said:
What program for extracting? In my Downloads, it's just a white page. No extract option.
Click to expand...
Click to collapse
Move the .rar to your PC
Use 7zip to extract the .tar
ObrienDave said:
Move the .rar to your PC
Use 7zip to extract the .tar
Click to expand...
Click to collapse
it was one file. It was ".tar.rar"
I extracted to desktop, and it's still one file. Only now it's a .tar.MD5
Mansevolver said:
it was one file. It was ".tar.rar"
I extracted to desktop, and it's still one file. Only now it's a .tar.MD5
Click to expand...
Click to collapse
Flash the MD5 file in PDA mode.
ObrienDave said:
Flash the MD5 file in PDA mode.
Click to expand...
Click to collapse
Alright. The phone works now (Thanks)
HOWEVER. Now in the stock recovery, a red triangle pops up saying "no command"
Mansevolver said:
Alright. The phone works now (Thanks)
HOWEVER. Now in the stock recovery, a red triangle pops up saying "no command"
Click to expand...
Click to collapse
Have you tired to Odin a recovery so you can flash Roms again ?
Sent from my SPH-L720 using Tapatalk 4
Mansevolver said:
Alright. I have the Odexed one. it's a .tar.rar. I simply go into download mode, throw the file into PDA on ODIN, and flash?
Click to expand...
Click to collapse
If its a .rar file. Unrar that file and just only have the .tar. And yep that basically it
hey guys,
i have a hong kong n9005 trying to flash n900w8 rogers modem onto my note3
phone is rooted via kingo android root, its CWM based
however when i try to flash modem it keeps saying secure check fail sbl1
what is the solution?
thanks in advance
x1kc said:
hey guys,
i have a hong kong n9005 trying to flash n900w8 rogers modem onto my note3
phone is rooted via kingo android root, its CWM based
however when i try to flash modem it keeps saying secure check fail sbl1
what is the solution?
thanks in advance
Click to expand...
Click to collapse
are you flashing with odin /mobile or pc
jaythenut said:
are you flashing with odin /mobile or pc
Click to expand...
Click to collapse
Sorry forgot to post, I am trying on Odin pc
x1kc said:
Sorry forgot to post, I am trying on Odin pc
Click to expand...
Click to collapse
bump any one can help?
x1kc said:
hey guys,
i have a hong kong n9005 trying to flash n900w8 rogers modem onto my note3
phone is rooted via kingo android root, its CWM based
however when i try to flash modem it keeps saying secure check fail sbl1
what is the solution?
thanks in advance
Click to expand...
Click to collapse
Curiously, which file you use to flash with Odin PC?
Can you show me the file?
And how did you load it into Odin?
vndnguyen said:
Curiously, which file you use to flash with Odin PC?
Can you show me the file?
And how did you load it into Odin?
Click to expand...
Click to collapse
i downloaded the n900w8 modem from sammobile
i put my phone to download mode
odin pc load it through phone and then flash
x1kc said:
i downloaded the n900w8 modem from sammobile
i put my phone to download mode
odin pc load it through phone and then flash
Click to expand...
Click to collapse
So what is the filename you load into Odin? The whole firmware or just a modem?
Try to load only the "modem.bin" file
vndnguyen said:
So what is the filename you load into Odin? The whole firmware or just a modem?
Try to load only the "modem.bin" file
Click to expand...
Click to collapse
the file name is "N900W8VLUBMJ4_N900W8OYABMJ4_N900W8VLUBMJ4_HOME.tar.md5"
i will try to rename to modem.bin and try later
thank you!
x1kc said:
the file name is "N900W8VLUBMJ4_N900W8OYABMJ4_N900W8VLUBMJ4_HOME.tar.md5"
i will try to rename to modem.bin and try later
thank you!
Click to expand...
Click to collapse
No no, I didnt mean to rename that big file to modem.bin.
The file you are using is a whole firmware. Try to rename it to *.TAR, then open with with WinRAR. You will see a modem.bin file inside. Extract this file (its size is only about 50MB) and flash only this file.
You guys sure you want to flash a 900W modem onto a N9005 phone?
vndnguyen said:
No no, I didnt mean to rename that big file to modem.bin.
The file you are using is a whole firmware. Try to rename it to *.TAR, then open with with WinRAR. You will see a modem.bin file inside. Extract this file (its size is only about 50MB) and flash only this file.
Click to expand...
Click to collapse
gave it a try, it showed to attempt the flash but failed sadly
hallydamaster said:
You guys sure you want to flash a 900W modem onto a N9005 phone?
Click to expand...
Click to collapse
i want to flash the modem so that i can use band 7 modem here in vancouver
x1kc said:
gave it a try, it showed to attempt the flash but failed sadly
Click to expand...
Click to collapse
this modem may not be compatible with your Note 3
Hello, I've got this question when I downloaded a new firmware for my phone and found another pit file inside the package. I used that pit file to flash the new firmware instead of the original one extracted from my phone using Heimdall, but it gave me some issues such as file systems with wrong size and so on.
I found an option called "repartition" in Heimdall and Odin which does upload the new pit into the phone but I haven't tried that option yet.
The question is: Should I update the new partition file to my phone using the repartition option? Or should I keep using the old one?
Another question: Why do new releases have a pit file? Does that mean that I have to repartition my phone?
As you can see attached below the two files differ from 3 kilobytes of size
cizordj said:
Hello, I've got this question when I downloaded a new firmware for my phone and found another pit file inside the package. I used that pit file to flash the new firmware instead of the original one extracted from my phone using Heimdall, but it gave me some issues such as file systems with wrong size and so on.
I found an option called "repartition" in Heimdall and Odin which does upload the new pit into the phone but I haven't tried that option yet.
The question is: Should I update the new partition file to my phone using the repartition option? Or should I keep using the old one?
Another question: Why do new releases have a pit file? Does that mean that I have to repartition my phone?
As you can see attached below the two files differ from 3 kilobytes of size
Click to expand...
Click to collapse
I've never touched the pit using Odin,
physwizz said:
I've never touched the pit using Odin,
Click to expand...
Click to collapse
Well, it seems you've been using the original pit your whole life. Thanks for answering.
cizordj said:
Well, it seems you've been using the original pit your whole life. Thanks for answering.
Click to expand...
Click to collapse
Works for me