Database Users

HD2 touch screen doesn't work

Hi guys,
This evening something wring happened with my HD2. Suddenly without any visible reasons touch screen stopped working. Actualy screen itself is working but it doesn't react on any touches. I did hard reset - no luck, screen is working but touch surface isn't, so basically my phone is almost dead :-(
Have you seen this behaviour ? Is there any possible way to fix it ? The only thing that comes in my mind which could cause something like this is static electricity shock, but if it kills HD2 screen I want my money back.
I guess now I should use warranty and this is just after 1 month of usage....

Just a stupd question
Don't be offended by my question, I just want to rule out the obvious.
You're not wearing gloves due to the cold outside?
Greetings
chuelibrueder

No, I'm not using gloves with HD2 :-(

I have the same problem. I believe that the connectors under the screen became loose.
I have send an email to htc and they told me to contact the retailer to check if they can replace the device and if not to contact the service center in Cyprus.
There is another thread about this issue here

i`m sure that warranty will solve it.. just contact your retailer.. good luck

Hmmm,
Yet another one having to go back due to hardware problems....
WB

I loose the touch screen today and the hardware button exept Home i think, i had to remove the battery and i waited 30s put it back and everything went in place, the phone had called one contact when i had the bug.
The only thing that happened before screen doesn't work and buttons : i received an MMS strange, i'm not sure i can rely on my phone
I only installed the 1.48 rom and the 3 patches (audio, sms and sd card)

20mihalko said:
i`m sure that warranty will solve it.. just contact your retailer.. good luck
Click to expand...
Click to collapse
I contacted the service center in Cyprus and they offered to repair it but they don't have spare parts right now. I've also send an email to the retailer and wait for their answer.
Seems i have to wait after Christmas for a repair or exchange.
The good thing is that by pressing the screen with my palm or giving it a few solid taps it works for some time.

bBeware keyboard layout!
I had suffer bye used hadwritting layout sometime it cause screen doesn't responds
try change keyboard layout not hadwritting

Just had the same thing happen with mine, powers up but the screen wont respond anywhere i press. I have tried hard reset AND soft reset, nothing!
Have just restored factory ROM, and deleted hspdl and dropped off at vodaphone in town. Im gutted!!

really seems to be a production problem: i had to send my hd2 back to htc for screen replacement just 4 weeks ago... same fault as yours: the touchscreen wasn't responding to input anymore!
the last weeks i noticed that many people had this problem too...

wow.. keeping a close eye on this.. guess the same problem from the HD is creeping up to the HD2..

Well im hoping vodaphone dont turn around and say its not covered under warranty etc, I had to [like most ppl] sign up for two years to get this phone, i aint gonna be to happy if i have to spend the next 21 months of my contract without the handset i wanted!

Yikes , yesterday my screen didn't respond either (for the first time). Soft reset didn't work. After taking the battery out and leave it out for > minute it still didn't respond. I pressed the screen a little and then it worked again. Not sure if it was because of pressing the screen, but it did look that way. I hope this will be the last time this happens!

tnx!
dio62000 said:
Yikes , yesterday my screen didn't respond either (for the first time). Soft reset didn't work. After taking the battery out and leave it out for > minute it still didn't respond. I pressed the screen a little and then it worked again. Not sure if it was because of pressing the screen, but it did look that way. I hope this will be the last time this happens!
Click to expand...
Click to collapse
YESSS!!! thanx mate this worked like a charm!!

VlaJko79 said:
YESSS!!! thanx mate this worked like a charm!!
Click to expand...
Click to collapse
Well, it's been a few weeks now and I've had this problem several times again and worse, even after a hard reset; and almost each time I could fix it by pressing the screen/hardware buttons, but that shouldn't be the way, because I don't think it's good for the hardware, so I searched the forum and I think I found the two culprits (maybe a combination of the two):
1. The problem occured exactly the same day I began using my 16 GB card, class 2. It once happened that when I had the locked screen problem I took out the card and it immediately unlocked. But every now and then the phone still froze, even when I took out the SD card if the problem occured.
2. Then I have put off the automatic light adjustment settings and guess what; no more freezes!
It looks like a combination of power settings and use of SD card. I'm not very technical, but even when it looked like it was a hardware fault at first, it now seems it's a software fault after all.

Touchscreen doesnt work
Well F4CK my screen will not respond to touch at all anymore seems that this is a problem that is not well addressed tmobile is sending out a new one but the question is when will the touchscreen stop working on that "new" one.NOT happy at all.

Well this has now happened to me....no touch response but hardware buttons working, screen still displays-- off to JB HIFI as soon as I can to replace.

OOOKK I had this problem when i just flashed my phone with a costum rom. As far i remember my phone fall down once or twice but not something bad. I have the silicone cover and screen protector. If it was a hardware problem i believe that it shouldn't work at all even if you had to use the hardbuttons. Which that was how i would have to use to unlock the screen. I will go back to the factory rom and settings to see if there is any difference. My current rom is AthineOS 3.14 and Radio 2.15.50.14.
If for any reason you want to access your cellphone and you don't have time go through troubleshooting. I Suggest you download mymobiler which connects the phone and you can use it through your pc. Make sure you take the sd card before you connect. Here is the website www.mymobiler.com

In my case, my phone was RIP. The touch screen stopped working after installing a custom ROM. I installed the latest official ROM from T-Mobile and my phone and came back to life

Strangest touch screen loss problem! + SOD / QUICK WAKE UP TEST WITH YES/SEND KEY.

17/9/2010 EDIT: With a lot of feedback from this thread and other threads, it has come out that, waking up the phone with the YES/CALL/SEND green button is BETTER than waking up with the NO/END/POWER red button for SOD reasons.
----
Hello guys,
You probably know I am actively in the Android HD2 porting community.
I am having the strangest touch screen problem. I am really experienced into winmo and android stuff. Please read carefully.There is a surprise at the end.
BOTH under Android AND Winmo my touchscreen works just fine after bootup.
It first started like this:
At first my touchscreen stopped responding when I hold no button to make a reboot/power off. I thought it was from the usual Android touch screen freeze related to g sensor. Then I realized that it was the same in Winmo! Holding no button ALSO caused touch screen to die even under winmo.
Then it started loosing touch after sleeping. My touch is ALWAYS working when I boot winmo OR android and works for hours if not put to sleep. But it stops working after putting it to sleep.
Frustrated,
I restored with spb backup. Didn't work.
I reflashed my winmo rom. Didn't work.
I made a hard reset. Didn't work.
I removed sd card. Didn't work.
I removed sim card. Didn't work.
I changed the date. Didn't work. (this was a strange fix for some blackberries)
I flashed original 1.66 Turkish rom, 2.07 original old radio, even original 1.42 SPL which makes this hd2 fully stock the day I bought it. Even made another hard reset. Still didn't work!
By this time it's obvious this is a hardware problem and needs warranty.
OK
THEN I FOUND THE STRANGEST THING:
If I wake up the phone with ANY hard button other than the NO/HANGUP button touch screen WORKS!!! (Yes/Send button under Android)
BELIEVE ME, I HAVE TRIED FLASHING REFLASHING RESETTING AND TESTED 100 TIMES and YES it is ALWAYS the same. This is not a random thing.
If I wake up my phone with No button under ANDROID OR WINMO, my touch doesn't work. But if I wake up with back button windows button home button yes button, the phone wakes up properly AND touch works. Android of course doesn't work with the original radio, so I wasn't launching Android with the last test.
HOW IS THIS POSSIBLE AT ALL?? It looks like hardware fault, but touch loss IS related to NO button!
I will send my phone to warranty anyway but it will happen after the holiday (not before mid september)
IF ANYONE have an issue like this, PLEASE post.
I just want to make sure this issue isn't related to Android porting. If it is, this might be an important info. Maybe it may help devs fixing the general touch screen and wake up problems. Also everybody TRY waking up Android with the yes/send button to see if it helps with your wake up or sod issues and provide feedback. Also it may help with the phone not responding after hangup in Android. There is something hardware going at the background with the no/hangup button. I know this issue is hardware fault but still may shed light to our problems with touch screen and wake up issues. Maybe there is something hardware or firmware inside the phone waking up the digitizer. I know that hangup/no/end button is internally different than the other buttons, something like it shares the power button function that is usually on the top of the device with other htc devices. (Mine is a european hd2 and the hangup button is not red) I also wasn't using an overclocking kernel.
Please think twice before posting, and don't post anything useless. I am absolutely no noob, you can search my previous 200+ posts. I wouldn't post anything unless I am definitely sure. And I have a feeling that this thread has the potential to help or make something come out. If it doesn't, no harm done.

since most of the time inwinmo or android the no or yes button pop up generally on the same side in both os's and , taking in consideraton it might be a hardware issue , i would say you issue might be a harsware issue undr the screen when you touch no...wild guess

I was the same problem.... but it is even worst for me now...
Before, at least work touch others buttons... now my touchscreen DON'T WORK. :-(
I suppose that it's a hardware problem :-(

memin1857 said:
Hello guys,
You probably know I am actively in the Android HD2 porting community.
I am having the strangest touch screen problem. I am really experienced into winmo and android stuff. Please read carefully.There is a surprise at the end.
BOTH under Android AND Winmo my touchscreen works just fine after bootup.
It first started like this:
At first my touchscreen stopped responding when I hold no button to make a reboot/power off. I thought it was from the usual Android touch screen freeze related to g sensor. Then I realized that it was the same in Winmo! Holding no button ALSO caused touch screen to die even under winmo.
Then it started loosing touch after sleeping. My touch is ALWAYS working when I boot winmo OR android and works for hours if not put to sleep. But it stops working after putting it to sleep.
Frustrated,
I restored with spb backup. Didn't work.
I reflashed my winmo rom. Didn't work.
I made a hard reset. Didn't work.
I removed sd card. Didn't work.
I removed sim card. Didn't work.
I changed the date. Didn't work. (this was a strange fix for some blackberries)
I flashed original 1.66 Turkish rom, 2.07 original old radio, even original 1.42 SPL which makes this hd2 fully stock the day I bought it. Even made another hard reset. Still didn't work!
By this time it's obvious this is a hardware problem and needs warranty.
OK
THEN I FOUND THE STRANGEST THING:
If I wake up the phone with ANY hard button other than the NO button touch screen WORKS!!! (Yes button under Android)
BELIEVE ME, I HAVE TRIED FLASHING REFLASHING RESETTING AND TESTED 100 TIMES and YES it is ALWAYS the same. This is not a random thing.
If I wake up my phone with No button under ANDROID OR WINMO, my touch doesn't work. But if I wake up with back button windows button home button yes button, the phone wakes up properly AND touch works. Android of course doesn't work with the original radio, so I wasn't launching Android with the last test.
HOW IS THIS POSSIBLE AT ALL?? It looks like hardware fault, but touch loss IS related to NO button!
I will send my phone to warranty anyway but it will happen after the holiday (not before mid september)
IF ANYONE have an issue like this, PLEASE post.
I just want to make sure this issue isn't related to Android porting. If it is, this might be an important info. Maybe it may help devs fixing the general touch screen and wake up problems. Also everybody TRY waking up Android with the yes button to see if it helps with your wake up or sod issues and provide feedback. Also it may help with the phone not responding after hangup in Android. There is something hardware going at the background with the no button. I know this issue is hardware fault but still may shed light to our problems with touch screen and wake up issues. Maybe there is something hardware or firmware inside the phone waking up the digitizer. I know that hangup/no/end button is internally different than the other buttons, something like it shares the power button function that is usually on the top of the device with other htc devices. (Mine is a european hd2 and the hangup button is not red) I also wasn't using an overclocking kernel.
Please think twice before posting, and don't post anything useless. I am absolutely no noob, you can search my previous 200+ posts. I wouldn't post anything unless I am definitely sure. And I have a feeling that this thread has the potential to help or make something come out. If it doesn't, no harm done.
Click to expand...
Click to collapse
BIt strange this one to be honest I think it may just be your device as there are now hundreds of users of android on the hd2 and this is extremely rare. Hopefully a dev will look into and find a possible solution but I doubt it. If I was you I would put it back to stock and send it off to HTC for a new one. Even if a dev manages to find the problem you will have a new or as new hd2

I have been trying and I must say that I sort of do share your experience. The most left button (referred to as yes) awakes the phone just right as where the most left (No) takes its time to start the phone. I haven't had any noticable touch issues that could be related to these hard buttons yet.. (I think)
But I do think you have a point.

Interesting, I had something similar. I was using elegancia rom v1 for the longest time, with all my android builds, no problems. Then I went to chunkydroid rom, and had a few issues, with multiple android installs (one of which was my original that was working before.)
Then I rebooted into chunkydroid, (windows), and had the same issue. It was strange. I tried a few other roms, same problem. Turned off the phone, next day, reflashed chunky again, and hyperdroid 1.1, no issues since. (Only difference, which I don't know if it's related, but again, might help, is that I was overclocking. I have since not let anything go above 998 in setcpu, and even removed all builds that were overclocking. I though it might have had something to do with it (and the phone wasn't warm at all.)
I have not been able to duplicate the problem since though (even with overclocking just to see). So I'm pretty stumped. I'm sure the devs will work it out.

I have taken to pressing the yes/send key to wake up my phone as it seems more consistent than pressing the end key. My theory is that multiple wake up/sleep messages are being sent on the end key and the system gets confused. Some sort of debounce might help.
Just my thoughts.
Running shui8 realstock rmnet with micyprima r9.

It seems waking up the phone with the Yes/Send button somehow seems better with current builds and kernels.
I am asking everybody reading this thread to try waking up their Android devices with the yes/send key and share their experience if it is making their Android wake up quicker with less SODs.
Note: I am still using yes key wake up as a workaround for my hardware touchscreen fault. Still absolutely works everytime. I found out that if I accidentally try to wake up with the no/hangup key I need to wait about 10-15 seconds before yes/send key does its magic again.

well, i tried there is absolutely no difference between any hard button. if i have sod, none of them solves... actually its not sod i think, when you try to put standby and wake up several times quickly, screen stops responding for a while. you need to wait at least 15 seconds between each standby and wake up. can i fix this? or this is the sod?

Waking up with the yes/send button would not make any difference if your phone can wake up good with the no/hangup button already. But we are trying to find out if yes/send button wakes up better in long term usage. (no/hangup button sometimes can't wake up and that is the sod refers to)

SOD happened to me few times too with the NO/Hangup button and if/when that happens, if you press NO/Hangup button for long(for the menu with the turn off the phone,reboot,plane mode,...etc options) screen comes back BUT sometimes it locks the screen brightness to lowest possible setting(with %0 actually it doesn't completely turns off as you know).
Other than that "bug" NO/Hangup button works fine for me but as the OP, YES button is more stable and no SODs happen with the YES button...
Btw there is no difference for me YES button vs NO/Hangup button by means of quickness... Both works the same speed unless of course there is no SOD with the NO/Hangup button...
Just wanted to share my experience...

This thread is awesome
Thanks for this thread. I have been trying to use any android build for at least a full day with no success. Ive used different winmo roms and radios such as chucky and miri roms. I still ran into sod's. After waking with the yes/button i have had no sod issues since then, Once again awesommmmmmmme thread.

After some time my digitizer died almost completely. (Issue became worse) It is currently being handled under warranty. (digitizer is replaced)
But at least with a lot of feedback from this thread and other threads, it has come out that, waking up the phone with the YES/CALL/SEND green button is BETTER than waking up with the NO/END/POWER red button for SOD reasons.

any solution to this issue yet because i just started having this exact same problem w/ my HD2 yesterday before that it was perfectly normal and all the suddon the Power/END/NO button wake up cause the screen to not respond to the touch at all however wake up w/ home,back,menu,call button the touch screen works is back to normal
still can't figure out if its a hardware or software problem cause i also tried flashing bunch of roms/radios/and android roms as well and even went back to stock rom in hope for a solution

waking with green is about 2s faster for me.

Same thing happens to me before 2 days.I tried many hard resets,roms,radios and my screen didnt work.I couldnt even login in wm.
My screen was completely dead.The last thing i did,before my screen goes unresponsive was to push no/hangup button in android to open it
At first also i thought it was a g-sensor issue,but then realise that it was much more than it.
Until the moment i read this thread
The way it worked for me
I open the device with no button of course,made a soft reset from red hole and i wait until the device goes to standy itself.Then i open it from send button and voila touch is back !!!!
Strange thing but it works.Thank you very much you are a genius

sure the touch comes back when it wakes up using all other buttons except the power/end button so why is that all the sudden the power/end button causes the screen to go unresponsive
like for say when i hold the power/end key to open the pHONES OPTIONS in windows or android once the PHONES OPTIONS shows up and i try to click on power off or reboot on the screen the touch doesn't respond so the only way to reset or power off the device completely is the either use the reset button in the back or pull the battery out
i'm going to be sending it under warrenty/insurance to t-mobile and hopefully get a replacement cause i'm so use to the power/end button to wake up my device...

Guys be extremely carefull when using hard buttons in android.Finally my problem with screen is not the end button but the back arrow button.This button is necessary for using android and i have pushed it many many times the last months as i am using android.Νοw every time i pushed it my touchscreen stops responding.Τhe last time i pushed it my screen stopped responding(i thought for ever) and didnt knew the exactly reason that this happens.Because i didnt want to send the device to htc (firstly i must send it to expansys in france and they will send it to htc) and take it back at christmas i decided to go to a local mobile service.I wasnot mind for warranty cause i wouldnt be able to live 4 weeks without hd2.I was ready to give 600euros to buy desire hd
Result from service
At firstly he said to me that hd2 have no touchscreen problem and it works ok
I paid 20euros for opening the device and took it back.At first 5 minutes my screen stopped responding again and didnt knew the reason.For my good luck i leave the device untouched 10 minutes and the screen come back again.Then i used it and the time i pushed the back button the screen stopped working,fortunatelly for little seconds.Now i know.My screen stop responding when i push back button.So i change the keylayout to my android build and now i push send key instead of back and volume up key for menu and volume down for power on-off and hd2 works perfect after 24 hours without touching the back button
Also in monday i will go to service again to fix the button problem

Same issue with me
Exactly same issue with me. I have been using Winmo and Android on and off in my HD2. couple of weeks back, touch didnt respond after waking up the device from standby by pushing endkey.
tried everything - flash/stock rom/removed SD card/ hard reset/clear storage/custom rom/ battery pull out etc...
touch worked suddenly and only when i slightly touch the end key instead of pushing it fully, the start menu opened..this happened for few days and when ever i push the end key...screen goes unresponsive. all other hardware buttons are working fine and if at all i push end key the issue starts.
unfortunately my friend pushed the end key once and the screen never responded after this....now am using my old p3450 htc touch...
i think if we change the AP BOARD (Flex ribbon-keyboard chip) everything will go back to normal coz its not the problem with digitizer or the lcd of the software for sure.
trying to order one in ebay, we can change this ourselves...no need to send it to service centers and waste money on it.
if any of you have done this already...let me know if it worked for you.

guys dont know if it is allready known but there is a app called sidebar style swkey
http://forum.xda-developers.com/showthread.php?p=9726110#post9726110 which puts software buttons in the screen.This app is definitely button saver

HD2 New Weird Screen wont unlock issue - help

this is a new problem for me. I have been using the most recent Dutty ROM together with Mdeejay Android ROM without any problems. All of a sudden, when I try to unlock the screen after STANDBY, it just wont register my touch, as if I am not touching it. It boots up fine, and on the first unlock works fine, but when the screen lock goes on again (after every standby) it just wont unlock. So I am stuck (I use Exchange and our policy forces the lock after standby, so I have to use it - and its worked fine for ages).
If I boot into Android, it works fine, the unlock works fine, yet strangely when I try to shut the power down, THAT screen also doesnt register me touching it.
I have hard reset but even before I load an app or do anything, the problem exists.
I also reflashed a DUTTY ROM. Same problem.
I tried CHT lockscreen - same issue. After Standby, screen doesnt register my touch.
Anyone have any ideas?

Same problem for me.. Restoring a backup image after being forced to hard reset this morning and now suddenly my HD2 won't wake up after sleeping. Pressing my end key only lights up my buttons but I have to pull the battery to reset. I'm thinking it's related to me having CHT installed, yours however might be a different problem.

I had something similar. It was right after I had installed CHT 2.0 and was looking to make the top and bottom bars transparent. I found a cab that claimed it would do this and installed it. Sorry, I don't recall what cab it was and I have deleted it. When I rebooted Sense would hang and if it got into a lock it would only move the slider a little where it would stop. Luckily, I had done a backup that morning right after I installed CHT 2.0 with Sprite so I restored and all was well.
I don't know if this is of help but I figured I'd throw it out there.

it wakes up, but wont register when I try to swype the unlock screen.

ekerbuddyeker said:
it wakes up, but wont register when I try to swype the unlock screen.
Click to expand...
Click to collapse
Your lucky you get that far lol.. I don't get any waking up. Plus I now uninstalled S2U2 and still no change. Disabled all locks of any kind and still frozen with sleep of death with in 1 min of hitting power to sleep it. I REALLY don't want to to a hard reset and install everything from scatch.. UGH.

weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?

ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
bump this is horrid

same
im having the exact same issue. I have flashed 3 different roms and flashed to the newest radio (2.15).
I started out using energy rom, didnt help. Flashed a newer energy rom, didnt help. Now im using the dusk rom, same issue.
SOMEONE PLEASE HELP!!!!

It's a quite common digitizer problem lately... it seems the HD2's digitizer is failing on some units, possibly because of usage with android? my father's device acted the same way, only it sometimes did register touch and other times, not.
My device doesn't have these problems, yet. But seeing that a lot of people here are experiencing these issues, and with the notion that I use android pretty much all the time since I first booted my device, i'm pretty sure i'll experience it soon as well..
Make no confusion thou, the assumption that android effects the digitizer are purely my own thoughts on this matter, no such thing has been proven and the conclusion that android is effecting our HD2s is based purely on the statistics of touch screen failures in the last few months since android has been made publicly available in a working form.
EDIT:
Those seeking A solution, as far as I know, the only solution is sending your unit to HTC for repairs, you'll get it back with a note that says that they replaced your digitizer or your screen, at least these are the reports I heard from the other folks whom followed this procedure.
Good luck.

HTC HD2 Screen Lock
I have only used Android a few times on this 'phone and it has a standard HTC/O2 ROM installed so it must just be a problem with the top part of the digitiser. With android running the unlock is at the bottom and is unaffected.
Is there any way of testing the digitiser before deciding whether to get a repair sorted,
Ta,

link:
htcphones.net/htc-hd2-problems-with-touchscreen
short version :
change digitizer

ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
A friend was complaining to me about something like this since last week. I could not figure it out so I went ahead and installed Android cm7 and still have the same issue.
Until I read this post after searching through the forums all over Screen now unlocks perfectly fine but only using the green Phone icon. If I try to wake the screen with the red Power button, the screen is unresponsive.
Thanks for the info.

Already happened tome its a hardware issue can't be fixed so if you still have warranty on ur phone send it to htc for repairs b because it tends to get worse n worse soon other keys will start to give in I think that's one reason why most android phone been switching to capacitive buttons because hardware causes this sorta issues and send it in for repairs to get it fixed
Sent from my SGH-T959 using XDA App

the same issue with me , is there is any solution for that .

Wakeup the phone using the send button.it will work

[Q] Touchscreen Problem

Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?

had same problem, found a FIX
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.

tidygrant said:
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
Click to expand...
Click to collapse
well i have woke up this morning to be able to unlock my device to then locking it and not being able to unlock it again!!! i had notification to say it had managed to restore 16 apps whilst i had been asleep so i am thinking there is a dodgy app out there some were

mazdarider23 said:
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App

I have this problem and have found no way to fix it, I have tried everything except possibly going to the clk loader instead of magldr. when i put the phone to sleep with the power button is when i have the issue of not being able to unlock my phone in Android. I have tried task 29, going back to original windows roms, sd and nandroid, it is a hardware issue related to the digitizer as far as I'm concerned. I love my HD2 and really need to fix or find another one. I know this doesn't help, but maybe a little more insite if nothing else

I had the same issue. With my 1st HD2 it started as an intermittent problem, then eventually completely stopped working. With my replacement it just started to happen again. I immediately flashed back to stock tmo windows and the touchscreen would work so long as I did not try and put the phone on standby or wake the phone using the end key. If the phone went to standby on its own, the touchscreen would not work either. I changed the settings so that the phone would not go into standby at all. I then learned that locking the phone from the windows menu and allowing it to go to standby that way somehow averted the touchscreen problem. After 2 days, the problem seemed to resolve itself, almost completely. If I try and wake it using the end key, the touchscreen still wont work, but every other button on wake works. Also, putting it in standby with the end key seemed to not cause the problem any longer.
I dont know if the issue varies per person, but what worked for me was going to stock windows for a couple of days, then starting over with android. I guess it depends on how far along the problem has progressed.

Look at my thread in my Sig about the Unresponsive Screen Solved. This sounds exactly as that. And there are various workaround solutions through out the post.

Hardware Problem?

Hey,
So my old HD2 has been having some problems for a while now. I know the first issue is a hardware problem, but there is a couple of work arounds.
1) Screen becomes unresponsive (touch doesn't work), and pressing the power button down too hard makes it freeze.
Now, the second point is the most annoying.
2) The phone has had 2 ROMs on it now (GB & ICS) and the problem keeps happening. If the phone turns off, and reboots it will just get stuck in a constant reboot loop, literally nothing I can do. The only way to "fix" this, is to boot into MAGLDR and do a hard reset... Then it sometimes boots up, and of course everything has to be started again.
The reason I think this one (^^) is hardware is because I've tried more than one ROM.
Anyone have any idea, particularly around point 2, whats causing this?

I've had a problem with one HD2 when I was repairing it - if I did not fasten the screws on the housing HD2 was constantly freezing and rebooting. The problem was solved by fastening the housing screws. Has your HD2 been opened and not repaired good?
Your HD2 might also be damaged in some way internally so some kind of shortage occurs when you press the power button too hard (did it fall from great distance? 1meter is enough / liquid damage?)
About the touchscreen - many HD2s have that. PS: lol! Yea, many HD2s have touchscreen well, I was talking about touchscreen problems hehe
my suggestion: send it for a repair.
for a second issue, i'd install wp6.5 and start from scratch. It might solve the problem