Can someone post up system.img, recovery.img, and all other images in order to completely nvflash to stock? Thanks
It's in the thread right below yours:
http://forum.xda-developers.com/showthread.php?t=842000
Related
Hey, I searched around but didn't find what I was looking for.
I need the rogers splash screen because I am going to have to send my magic in for warranty work. I think it is considered splash1, the very first image that comes up. if you just have a jpg or something I could turn that into the correct rgb565 format and flash it.
Thanks for your time!
Before I made any modifications to my phone I fastbooted in to a recovery rom and made a backup of my phone. Would I noticed there is a misc.img and recovery.img in the nandroid backup, but it doesn't seem to replace the recovery image or splash1... Do I have to restore these manually? is the splash1 a part of any of those images?
I have:
boot.img
cache.img
data.img
misc.img
recovery.img
system.img
Hi everyone,
I pulled down images made from AOSP for the Nexus 7 device successfully. I am trying to flash the zImage onto the Nexus 7 device via fastboot. But in the terminal I get a "Invalid partition" error after doing "fastboot flash zimage zImage". I can flash the boot.img, userdata.img, and system.img just fine. But I get an error for zImage.
I also tried a different method. I did a "make otapackage" and flashed the zip through CWM to I get a "no file_context warning". Afterwards when rebooting, the device shows the google logo but is a blank black screen after a few seconds.
That is when I fastboot flash all the stock images back on and try again... but no success.
Has anyone encountered something similar? Or has some idea of what I steps I can take to remedy this?
Thanks!
mdrdroid said:
Hi everyone,
I pulled down images made from AOSP for the Nexus 7 device successfully. I am trying to flash the zImage onto the Nexus 7 device via fastboot. But in the terminal I get a "Invalid partition" error after doing "fastboot flash zimage zImage". I can flash the boot.img, userdata.img, and system.img just fine. But I get an error for zImage.
I also tried a different method. I did a "make otapackage" and flashed the zip through CWM to I get a "no file_context warning". Afterwards when rebooting, the device shows the google logo but is a blank black screen after a few seconds.
That is when I fastboot flash all the stock images back on and try again... but no success.
Has anyone encountered something similar? Or has some idea of what I steps I can take to remedy this?
Thanks!
Click to expand...
Click to collapse
Not sure if your question was answered in another post as I found this thread searching on google for my own issue.
You can't fastboot flash zImage at all. You may be able to fastboot boot zImage but trying to flash the zimage is an incomplete image. You'd have to add the zimage to a boot.img to flash it with fastboot. Then you'd fastboot flash boot boot.img.
You should be able to fastboot boot zImage to boot the kernel from your pc with the existing boot.img. Hope this helps. I may not even see a response to this thread but I check Nexus 7 Q&A so I hope I hear it helps.
tiny4579 said:
Not sure if your question was answered in another post as I found this thread searching on google for my own issue.
You can't fastboot flash zImage at all. You may be able to fastboot boot zImage but trying to flash the zimage is an incomplete image. You'd have to add the zimage to a boot.img to flash it with fastboot. Then you'd fastboot flash boot boot.img.
You should be able to fastboot boot zImage to boot the kernel from your pc with the existing boot.img. Hope this helps. I may not even see a response to this thread but I check Nexus 7 Q&A so I hope I hear it helps.
Click to expand...
Click to collapse
Thank you for the reply!!! I really appreciate it as I didn't really know what to do about this issue. I don't know how to add the zimage to the boot.img, but I will look into it... do you have any more advice on this?
Before, when after building, I did flash boot.img, zImage (which failed), system.img, and userdata... and I did get it to boot, and everything seems to be working okay in general but I have an inkling that the zImage generated will be needed for what I aim to accomplish.
Anyhow, thanks again for the information I'm new to android development and am glad for any help!
Google decompiling a boot.Img
You can't flash a zimage (ramdisk) because it is not a partition
The boot partition or boot.Img contains both the kernel and the ramdisk
So what you need to do is decompile the boot.Img of your rom
Then put your new ramdisk into the decompiled one
Then recompile the boot and flash that
Sent from my Nexus 7
Hello guys ! Today i successfully extracted the boot.img and recovery.img of motorola xt320/xt321. Can someone help me to create a cwm recovery?
here is the extracted boot.img and recovery.img www. mediafire. com/?w5bvzsahgrz563d
Can someone help me ? To create a cwm recovery? . I already go to builder.clockworkmod .com/
but it give me a 3 files android_device_motorola_TinBoost, inputrecovery.img and recovery.img here's the link [email protected]/job/recovery/13999/ Just remove the "@" and replace with Dot What to do? Fastboot cannot detect my phone.
why no one replys to my thread? ((( :crying:
What tools you're using to extract the boot.img and recovery.img ?
In the firmware it renamed to recoverysec and bootsec.mbn just change the mbn extension to img
Sent from my XT321 using xda app-developers app
How do I pull a clean jeallybean boot.img, system.img, recovery.img, & userdata.img
Hi,
Let say I lock BL and unroot my US WiFi Xoom. Is it possible to go straight to stock JB instead of starting from HW69 then work its way to latest version.
If it's possible, where can i download or how do I pull a clean jeallybean boot.img, system.img, recovery.img, & userdata.img from my xoom wifi?
[INFO]Stock Images & Other Links is only up to Build HMJ37 & HTJ85B for US Retail for WifI Xoom
Thanks
Go to Motorola Website (MotoDev)
Hi all, i have problem to boot my ze553kl, can someone post here stock recovery.img and boot.img newest oreo firmware WW-80.30.76.10?
Many thanks
Ciao
Here you go
https://drive.google.com/open?id=1vz_OG7QICx9qemF-5MjbcroXhD5cYD4z
boot.img already have recovery so no need to flash recovery.img separately.
Thanks!
Ciao