I have just recently flashed mt ATT SGT to JJ4>JK5 , rooted unlocked and voice enabled with Bell modem. Everything seem to be working just fine, but there's one thing that does not seem right : If I put the tab in recovery mode, I get in the background of the recovery window the little android and the yellow triangle. Whatever recovery command I select ( reboot the system for example ) all I get is the android and the yellow triangle in the foreground and the phone stay stuck on it. I have to press and hold the power button to reboot in normal mode.
Any suggestion ?
P_
i have exactly the same issue and been trying to find a solution
anyone kind enough to show us how to fix this?
I found a solution to it , I do not why it's working but it is !
1) select the command that you want , let's say "reboot system now" and hit the Home button . You will now get the Triangle and the android
2) Wait a good 30 seconds
3) hit the Home button again ............... Voila' now the command it's executed !!!
You can now hit the "thanks" button on the bottom of this post
After unlocking the N 10 and pressing start it is stuck on the "cross".
I go back to the bootloader and I see the following message :
" downloading - do not turn off the target" either connected or disconnected from the pc.
In this case there is no up or down arrows the only choice is "start"
From here to go back to the bootloader without the message I have to press power and both volume.
Then I can select recovery. Once in recovery I cannot get into the recovery menu no matter the way I press power and volume.
If I leave the N 10 on recovery after a while it goes back to the screen with the "cross".
Of course in this configuration I cannot access adb and fastboot.
I would really appreciate the help of the forum members.
gunner1937 said:
After unlocking the N 10 and pressing start it is stuck on the "cross".
I go back to the bootloader and I see the following message :
" downloading - do not turn off the target" either connected or disconnected from the pc.
In this case there is no up or down arrows the only choice is "start"
From here to go back to the bootloader without the message I have to press power and both volume.
Then I can select recovery. Once in recovery I cannot get into the recovery menu no matter the way I press power and volume.
If I leave the N 10 on recovery after a while it goes back to the screen with the "cross".
Of course in this configuration I cannot access adb and fastboot.
I would really appreciate the help of the forum members.
Click to expand...
Click to collapse
You're in a bootloop. While in recovery (without options) you need to press all 3 buttons on top at the same time. Don't hold them, just press them and release. Once or twice should be enough to pull up the recovery options. Once there, do a factory reset and you'll be all set.
Mine got pretty hosed when unlocking too. Couldn't even get into recovery. Had to use fastboot to flash recovery.img, then I could get into recovery and do a factory reset.
Sent from my Nexus 10 using XDA Premium HD app
Blueback22 said:
You're in a bootloop. While in recovery (without options) you need to press all 3 buttons on top at the same time. Don't hold them, just press them and release. Once or twice should be enough to pull up the recovery options. Once there, do a factory reset and you'll be all set.
Click to expand...
Click to collapse
Thank you very much (I also press the right button).
At first I wanted to reply that even this option did not work though I tried it more than once. Instead of replying to your post I decided to give a final try and it worked. In my previous attempts I was obviously taking a nap on the 3 buttons.
Yes, I know, everyone knows how to enter safe mode, bootloader, and recovery.
I found there are some inconsistencies to entering and using recovery depending on your which software you are running. In addition there are multiple ways of entering stock recovery.
Also I always see people asking this question because somehow the keypress order is not intuitive.
Entering Safe Mode
Tablet booted and running Android
Press/Hold Power button until power menu shows up
Tap/Hold Power off option
Choose OK to reboot in safe mode
Tablet powered down
Press/Hold Power button until Google screen shows up, RELEASE Power button
Press/Hold VolDn until Android has booted up
If successful, you will see Safe mode overlayed on bottom left of screen.
Entering Bootloader (ie fastboot mode)
Tablet booted and running Android
From adb
adb reboot bootloader
can also choose recovery from menu after bootloader comes up
From app
Use Quick Boot from Google Play
Tablet powered down
Power+VolDn while booting to enter bootloader
Release buttons after you see bootloader screen
Entering Stock Recovery
Tablet booted and running Android
From adb
adb reboot recovery
From app
Use Quick Boot from Google Play
Tablet powered down
Power+VolUp while booting to enter recovery
You can release buttons after you see Google on screen
When Stock Recovery starts you will see the Android fallen down screen
To bring up the Recovery menu
Power+VolUp to show recovery menu
Must be this sequence Press/Hold Power, THEN Press/Release VolUp, release Power
Within menu
VolUp to move up
VolDn to move down
Power to select
In addition, I found an inconsistency with JSS15J stock recovery that wasn't in the JWR66N recovery
While at the Android fallen down screen if you mistakenly press
VolUp
instead of
Power+VolUp
you will still get the Recovery menu.
However, VolUp will no longer function. It will instead become a toggle for switching between the Recovery menu and the Android fallen down screen
Android fallen down screen
VolUp to toggle recovery menu
Within menu
VolUp does not work since it toggles recovery menu
VolDn to move down
Power to select
sfhub said:
Entering Stock Recovery
Tablet booted and running Android
From adb
adb reboot recovey
Click to expand...
Click to collapse
Are you sure with this command. I think it must be => adb reboot recovery <= or am I wrong ???
pRo_lama said:
Are you sure with this command. I think it must be => adb reboot recovery <= or am I wrong ???
Click to expand...
Click to collapse
Sorry, typo, fixed.
i`m on completely stock JSS15Q and i cant get into stock recovery. When im trying i see "no command" and red exclamation mark on the laying robot. What should i do?
laska300 said:
i`m on completely stock JSS15Q and i cant get into stock recovery. When im trying i see "no command" and red exclamation mark on the laying robot. What should i do?
Click to expand...
Click to collapse
sfhub said:
Entering Stock Recovery
Tablet powered down
Power+VolUp while booting to enter recovery
You can release buttons after you see Google on screen
When Stock Recovery starts you will see the Android fallen down screen
To bring up the Recovery menu
Power+VolUp to show recovery menu
Must be this sequence Press/Hold Power, THEN Press/Release VolUp, release Power
Within menu
VolUp to move up
VolDn to move down
Power to select
Click to expand...
Click to collapse
Please see RED section
Does the presence or absence of the red exclamation triangle mean anything?
Wot does safe mode do?
Anderson2 said:
Does the presence or absence of the red exclamation triangle mean anything?
Click to expand...
Click to collapse
I don't remember if there are two images one with and one without the triangle. I think I've only seen the image with the red exclamation point.
I've never seen anything to indicate the red exclamation mark is something you need to pay attention to.
Now if you apply an update and there is an error, then that is something I would pay attention to.
LoVeRice said:
Wot does safe mode do?
Click to expand...
Click to collapse
It doesn't load the stuff you added.
It is similar to safe mode on a PC, used to diagnose whether the issue is in the stock ROM or is in something you introduced by installing some app.
I Have a probleme
since a bought TAB 3 10.1 and it's boot into safe mode i'v restart it and turrn it off the back on but it didn't go what should i do ?
This thread is about nexus 7.
sfhub said:
This thread is about nexus 7.
Click to expand...
Click to collapse
oh sorry i was panic so i searched in every thing
Bootloader
If none of that works, try the command with a dash "adb reboot-bootloader" Depends on your device sometimes, sometimes unplugging your device right after you enter this command will keep it from getting stuck at the boot logo screen. If that doesn't work, hold the power button to power device down and then boot it into recovery instead using the button combo. Then you can wipe cache & start all over again.
I'm not even able to get into Recovery. I can get to the bootloader, then I select "Recovery mode" and it shows the Google logo, but it never goes into recovery. I have let it sit at the Google logo for a couple of hours, and end up just holding down the power button to shut it down.
I have tried Skipsofts toolkit, as well as Wug's, to try to unlock the bootloader. This ends up with the device hanging at the "Unlock bootloader" screen after selecting "Yes". Again, I have left it in this state for well over an hour with no change.
Here's some info on my 2013 Nexus 7:
KitKat 4.4.4
Never rooted
Never unlocked bootloader
HW version rev-e
Bootloader version FLO-04.02
I suspect my Nexus knew I was supposed to go on travel next week and is faking sick.
Any help would be appreciated. Thanks.
Hi guys i have a google nexus 5 and it is locked state. It is getting booted again and again but it jiust reaches google logo and again restarts. Safe boot is also enabled so i cant enter in recovery mode also. Please help me ASAP.
I went through a lot of searching and trouble to install CM11 on my Xperia Tablet Z, and I'd like to share a tutorial I made for anyone who is also wanting to accomplish this.
All links are in Dark Green because I cannot post links yet.
1. Download and extract the ADB+Fastboot+Drivers zip (alexpja.com/sony/adb-fastboot-win.zip)
2. Now we’ll unlock the bootloader.
a. If you do not have a Phone app (like I don’t on the SGP351), you can either get the IMEI from About -> Status in the settings OR you can find the IMEI right after the IC code, nearby the barcode on the bottom of the tablet.
b. If you do have a Phone app, enter *#06# to retrieve the IMEI.
c. Save this for later use.3. Place the tablet into fastboot mode and connect it to the computer.
a. Power off the device
b. Connect USB to computer
c. While plugging in the other side of the USB cable into the tablet, hold down the Vol + button.
d. If your speakers are on, you should a sound.
e. We have to install the drivers for fastboot. Open devmgmt.msc via the Run window or in the Start menu and in Other Devices section, you should see S1 Service or S1 Fastboot (anything containing S1).
i. If it is showing a yellow exclamation mark: Follow 3.e.i.1. If it is not, continue to 3.f.
1. We need to download Flashtool and use the driver setup. Download Flashtool (unrestrict.li/flashtool) and install it.
2. Find cmd.exe, right click it, and select Run as administrator.
a. Type in
Code:
bcdedit /set testsigning on
and press enter.
b. Reboot your computer.3. Once you have rebooted the computer, open the folder where you installed Flashtool (default: C:\Flashtool).
4. Open up the drivers folder and open Flashtool-drivers.exe.
5. Select the first two driver choices (Flashmode and Fastboot) and select “Xperia Tablet Z Drivers” and continue.
6. A new window will appear, continue on with that.
7. A window like this may appear a few times, just press Install this driver software anyway.
8. Run 3.e.2. again and run
Code:
bcdedit /set testsigning off
. Reboot your PC now or after the tutorial.f. The LED pulse light above it should be emitting a blue-ish color. The screen will be dark.4. Now we’ll verify if you have fastboot running.
a. Open the tools folder that was extracted from the ADB ZIP and double-click on START.cmd to open Command Prompt in the current directory (all it does is literally open cmd.exe, you can edit the script to verify).
b. Run the command
Code:
fastboot -i 0x0fce getvar version
. If you get
Code:
<waiting for device>
, then you did something wrong. Retrace your steps! (For example, I get
Code:
version: 0.5
)5. Go to (unlockbootloader.sonymobile.com) and continue until you reach the screen where you put type in the IMEI and an email address. Type in the first 14 digits of the IMEI (remove the last one) and your email address (not sure if name is required). You should get an email instantly with the key.
6. In the Command Prompt, run
Code:
fastboot -i 0x0fce oem unlock 0xKEY
where KEY is the key you received in the email from Sony.
7. Download whatever release you would like to use on the tablet (I’m using CM 11 nightly) from (download.cyanogenmod.org/?device=pollux)
a. Optional: Also download gapps for Google apps such as Gmail, Google Play Services, etc. (wiki.cyanogenmod.org/w/Google_Apps)8. Extract the ZIP file (but don’t delete it either) and copy boot.img to the tools folder.
9. If your device is still turned off, turn it on and enable USB storage mode. Copy the CM zip to either the internal storage (sdcard) or, if one is inserted, the microSD card (sdcard1).
10. Place it into fastboot mode again (#3).
11. Go back into the Command Prompt and enter:
a.
Code:
fastboot -i 0xfce flash boot boot.img
b.
Code:
fastboot -i 0xfce reboot
c. Enter recovery.
1. Once it shuts down, rapidly tap the Vol + button in order to get into the recovery.
2. Grep_The_Truth's tip: Look at the LED. It will turn orange and afterwards it'll turn purple. You want to press Vol+ as soon as it changes colors.12. Select “wipe data/factory reset” and wipe it. Afterwards, go back to main menu.
13. Select “Install zip” and either select “Choose zip from /sdcard” (internal storage) or “Choose zip from /storage/sdcard1” (microSD card).
I’ve had varying experience with installing from the /sdcard because sometimes it doesn’t want to mount /data while wiping (/data/media which is /sdcard is safe in wipe) the tablet, so if you were to install the zip from /sdcard with the error present, it would screw things up. I prefer the microSD card route (/storage/sdcard1), and you don’t even need a big one. 512MB works just fine. The actual path would be /sdcard/0/ when looking for the cm.zip in the internal storage.
14. When you have chosen to install from either /sdcard or /storage/sdcard1, select the cm.zip and install it.
a. If you downloaded gapps.zip, install it the same way as you did with the cm.zip.15. Go back to the main menu now and select “reboot system now”
a. Once, I had the option to install root access before rebooting, I declined (was planning on rooting after tutorial) but it gave me root anyway.
That’s it! You can now use CyanogenMod with the Sony Xperia Tablet Z.
Getting in to recopvery
I just struggled with entering recovery for way too long and I want to help others avoid this. I kept finding vague instructions.
The step I want to clarify is:
c. Once it shuts down, rapidly tap the
Code:
Vol +
button in order to get into the recovery.
Click to expand...
Click to collapse
This didn't work for me because if you press Vol+ too soon it goes right back in to fastboot mode. If you press it too late you will miss the recovery mode. You only have to press Vol+ once.
Please change step c. to read:
Look at the LED. It will turn Orange and then Purple. You want to press Vol+ as soon as it changes from Orange to Purple to enter recovery mode.
Grep_The_Truth said:
I just struggled with entering recovery for way too long and I want to help others avoid this. I kept finding vague instructions.
The step I want to clarify is:
This didn't work for me because if you press Vol+ too soon it goes right back in to fastboot mode. If you press it too late you will miss the recovery mode. You only have to press Vol+ once.
Please change step c. to read:
Look at the LED. It will turn Orange and then Purple. You want to press Vol+ as soon as it changes from Orange to Purple to enter recovery mode.
Click to expand...
Click to collapse
I'll add it along with mine, because I can do it with no problem.
alexpja said:
I'll add it along with mine, because I can do it with no problem.
Click to expand...
Click to collapse
alexpja Thanks for your tutorial, this is very detailed and easy to follow.
my Xperia is SGP321.
I put it into practice and the results it gives me the "oem unlock" is:
FAILED: (remote: Command nor allowed).
I guess you should treat my tablet has the bootloader locked and not allowed (for now??) the unlocked.
I hope someone gives us the opportunity to unlock the devices and in the future can be unlocked.
I had the same experience where at times the steps were a little confusing, especially for a beginner. Each set of instructions would either leave something out or skim over it as if everyone already knew it. That's understandable since they were probably written for that audience. I soft-bricked my SGP311 at least 10 times.
I was even going to write something like this but I got lazy.
One suggestion I would offer is to request the bootloader unlock key first since it sometimes takes a little while and a person can reduce the possibility of having to stop and wait just when they are making progress.
And for anyone going this route for the first time, don't make my mistake - flash exactly what the instructions say to flash, particularly boot.img. Once you have that recovery flashed you have a lot more control over your device. If something goes wrong in a following step like getting boot loops you can still fix it. But if you get annoyed and start poking at it then you can mess up the recovery. Then you have to reset everything to stock and just about start over.
While I don't want to say something stupid like claiming the tablet is indestructible, I found that whether I got stuck in a boot loop I couldn't get out of or screwed it up so bad that all I could get from the tablet was an occasional LED flash, I could always restore it using Emma. It's annoying to have to start all over but it's a huge relief when it boots normally.
for me flashing was fine and without any error but my Tab doesn't boot up with CM flashed...any idea?
Hanging at reboot
Hi.
I tried this procedure on my sony xperia tablet z 311. It unlocked fine and wrote boot.img fine but on reboot command, I get a red light and it hangs there.
I've managed to get it back to fastboot mode (pressing power and vol+, some white blinking lights).
But that's it, that's all I can do with this right now. It's a brick that can get into fastboot mode and that's it. Any time I write a boot.img (have tried a different one also), it writes fine but hangs with a red light at reboot.
Edit:
Used Sony's Emma in flash mode to get back to stock, tried again and it worked.
Maybe the problem was using the pollux instead of pollux_windy download, my bad.
Guess my bootloader won't be unlocked. This is A lot of work. Good job on the write up though maybe one day I'll tackle it.
BOOT LOOP Step 9
All was going well, but step 9 powering on device, now its looping.....Ill use flash tools to put jelly bean on and try again, since i was trying with kitkat...why i suspect kitkat is the issue, before i used to be able to unlock and lock boot-loader with jelly bean but with kitkat it didn't work, which i then forced it via cmd
No GPS
I used the tutorial for my Pollux Windy (WiFi Only) and used the latest nightly. everything went well but my GPS is now broken. Is this a known issue?
kevinsickles said:
Is this a known issue?
Click to expand...
Click to collapse
yep! use search to find out more.
mulebreath said:
Hi.
I tried this procedure on my sony xperia tablet z 311. It unlocked fine and wrote boot.img fine but on reboot command, I get a red light and it hangs there.
I've managed to get it back to fastboot mode (pressing power and vol+, some white blinking lights).
But that's it, that's all I can do with this right now. It's a brick that can get into fastboot mode and that's it. Any time I write a boot.img (have tried a different one also), it writes fine but hangs with a red light at reboot.
Edit:
Used Sony's Emma in flash mode to get back to stock, tried again and it worked.
Maybe the problem was using the pollux instead of pollux_windy download, my bad.
Click to expand...
Click to collapse
Hi,
I've been trying with my Xperia Tablet Z Wi-Fi SGP311. Ran into the same problem. On reboot command the LED was stuck on red for 10 minutes and the cmd window was still open. I unplugged the USB and the LED would not turn off. Tried some things, I don't remember specifically what, but it got the LED to turn off. Now my device can't be detected. I've downloaded Emma and it is not recognising my tablet. I've tried to plug the USB in while hold Vol +, Vol -, and the Power button. No detection for any. All I can do with my tablet is make the LED flash white, purple and red in rapid succession by holding Vol + and Power for 5 seconds.
Anyone know what's happened? I suspect I've completely bricked it :L
EDIT: Apparently there are different modes which you can cycle through. If you hold down Vol + and Power for 5 seconds, the LED will flash according to which mode the tablet is in. The different modes give these flashes:
- 1 White flash
- 3 Rapid which flashes
- A white, purple and red flash in quick succession
To switch between the modes, I hold down Vol+ and Power, and after 5 seconds it will take around 3 more seconds to change modes. One of these modes will not appear unless plugged into a PC. What do these mean and can I do anything with it? Tablet is still bricked.
EDIT2: I've managed to get Emma to recognise my tablet. Turns out the modes do have different purposes. I should be fine now, problem solved. I will just leave the solution here in case anyone runs into the same problem.
Unplug your device and hold Vol + and Power for 10 seconds. At the 5 second mark your LED should flash white ONCE. Keep both buttons held and within 5 more seconds, your LED will flash white THREE times consecutively. This will allow you to enter Flashmode (plug in USB while holding Vol -) and Fastboot (plug in USB while holding Vol +). For Emma to recognise your device, enter Flashmode and you can restore and try again.
Bootloop
I've tried many times to flash cyanogenmod onto my Xperia Tablet Z (SGP311). This is a Wi-Fi only tablet and I have downloaded the versions of CM from (download.cyanogenmod.org/?device=pollux_windy) I've followed all of the steps and tried all of the versions of CM down to 10.2 (I used GApps10.2 for CM10.2). Each version gets stuck in bootloop. I've cleared all data (in CWM - wipe data/factory reset, wipe cache partition, wipe delvik cache) before flashing CM and GApps; however, when I try to clear data I get an error. This is what the tablet says:
-- Wiping Data...
Formatting /data...
Error mounting /data!
Skipping format...
Formatting /cacha
Formatting /sd-ext...
Formatting /sdcard/.android_secure!
Skiiping format...
Data wipe complete.
Click to expand...
Click to collapse
I'm thinking the "Error mounting /data" is the problem, but I'm not entirely sure, nor am I sure of how to fix it.
Any suggestions?
EDIT: Turns out I'm just really bad with Android stuff. I ended up flashing the original Xperia software, unlocking the bootloader (according to this tutorial's instructions), then I downgraded to 4.1.2, rooted my tablet (forum.xda-developers.com/showpost.php?p=53063218&postcount=14) and installed the PhilZ and TWRP custom recoveries. I didn't get to use them in the end. For some reason CWM kept coming up no matter what combination of buttons I pressed while rebooting. After downgrading and rebooting, I followed the rest of the instructions on this tutorial (from step 7). This time I got no errors while cleaning the disk, cache and delvik cache. Flashed the zip files, rebooted the device and voila, Cyanogenmod11!
Again, I'll leave this edit here in case someone runs into a similar problem. I couldn't get any version of CM until I rooted first.
I followed this guide and bricked my device. If anyone has any tips - PLEASE HELP!
I tried to flash CM11, all seemed to be going great until CM11 and Gapps where installed any I hit "Reboot system now" in CVM. The device never booted again (I which I knew why!), and is now pretty much dead. I can however:
- Enter Flashmode
- Enter Fastboot mode
- Relock/Unlock bootloader
- Emma recognizes my device just fine in flashmode.
So I still think there is some hope, right?
I have tried installing the firmware that Emma suggests, doesn't work.
I have tried flashing a firmware I found on the internet with Flashtool, doesn't work.
I have tried relocking the bootloader and trying to repair the device through SUS, doesn't work.
So, PLEASE, help my sort this out! I would be forever greatful!
tp_88 said:
I followed this guide and bricked my device. If anyone has any tips - PLEASE HELP!
I tried to flash CM11, all seemed to be going great until CM11 and Gapps where installed any I hit "Reboot system now" in CVM. The device never booted again (I which I knew why!), and is now pretty much dead. I can however:
- Enter Flashmode
- Enter Fastboot mode
- Relock/Unlock bootloader
- Emma recognizes my device just fine in flashmode.
So I still think there is some hope, right?
I have tried installing the firmware that Emma suggests, doesn't work.
I have tried flashing a firmware I found on the internet with Flashtool, doesn't work.
I have tried relocking the bootloader and trying to repair the device through SUS, doesn't work.
So, PLEASE, help my sort this out! I would be forever greatful!
Click to expand...
Click to collapse
download a proper stock (not bricked) firmware for your device and flash with flashtool.
Rootk1t said:
download a proper stock (not bricked) firmware for your device and flash with flashtool.
Click to expand...
Click to collapse
What makes you think that the stock firmwares I've tried are bricked? I've since my post tried one which I downloaded through Flashtool - same result.
"It can't be trusted and my not work properly"
Hi,
I unlocked the bootloader and flashed twrp but can't boot the phone anymore.
It only starts when pressing power button + volume up. Then I get following message two times before I get the third, final message mentioned in the headline:
Code:
Your device has been unlocked and can't be trusted
After that it tells my to press the power button to continue -> phone goes off.
Can't connect to adb shell, so what can I do?
BR
Michael
happyass**** said:
"It can't be trusted and my not work properly"
Hi,
I unlocked the bootloader and flashed twrp but can't boot the phone anymore.
It only starts when pressing power button + volume up. Then I get following message two times before I get the third, final message mentioned in the headline:
Code:
Your device has been unlocked and can't be trusted
After that it tells my to press the power button to continue -> phone goes off.
Can't connect to adb shell, so what can I do?
BR
Michael
Click to expand...
Click to collapse
Can you get into recovery? If so, I would say connect phone in recovery, (will show up on PC as mtp device), then copy anything you don't want to lose. Then do a full wipe, and flash stock rom, or custom rom and see if the message is still there.
Managed to enter recovery for once. Flashed Omnirom but know it stucks at the 'Sony screen'.
Can't get into recovery anymore.
I did it!
It works!
Don't ask me how. Wild keypress combinations and luck.
I think its related to sony drm, you have to flash genesis kernel for it to work well, anyway good luck