Related
Anybody managed to get it work??? I get blank screen...please, write me your sys.txt.
OK...found the right combinations...
Here's my SYS.TXT, which is working perfectly...remember...you need to use DATA.ZIP and BRANDING.ZIP v10 from LZF to use this native resolution.
Code:
[folders]
app="%SDCARD%/iGO8"
[interface]
skin="ui_igo8"
resolution_dir="800_480"
vga=0
maxzoom2d=6000000
show_exit=1
laneinfo_signpost_enabled=0
[rawdisplay]
driver="gdi"
class="landscape"
highres=0
screen_x=800
screen_y=480
[map]
2dheadup=1
3d_max_tiltlevel=9000
3d_default_tiltlevel=9000
3d_max_zoomlevel=500
3d_min_zoomlevel=40
3d_max_zfar=500
3d_scale_carmodel=1
3dcarsizemin=4000
3dcarsizemax=6000
3dcarsizemul=10000
[roundaboutcam]
enabled=0
centery=20
[screen]
menu_animation=0
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[navigation]
show_current_city=1
show_countrychange=1
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=1
show_oneway=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
autosave=1
cache=4096
[warning]
speedwarn_alt_builtup_based=0
speedcam_visualtype=1
speedcam_soundtype=2
speedwarn_tolerance=100
[sound]
sound_q_length=200
queue_length=200
ding=1
[msnd]
msnd.start=0
[gps]
set_messages=0
port=4
baud=4800
I 've got IGO working
It took a little struggle cause TouchFlo3D takes up so much mem but after deleting some voices, maps and buildings and switching buildings and 3D roads off it works fine.
I just read you'got it workin too.
my sys.txt (hope it's helpful to anyone):
____________________________
[folders]
app="%SDCARD%/iGo8"
[interface]
maxzoom2d=6000000
show_exit=1
popup_info=1
poi_show_all_btn=1
[debug]
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
skip_eula=1
show_pedestrian=1
poi_labels=1
show_arrows_on_route=1
tts_min_ready_wav=1
tts_getaway_time=200
tts_expected_engine_delay=1400
reserve_memory=2097152
sound_q_length="200"
no_file_cache="0"
cache="1024"
enable_roadshadow=1
[map]
popup_info=1
show_labels=1
3d_max_tiltlevel=9000
[msnd]
msnd.start=0
[tts]
tts_buffer=131072
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
announce_exit_directions=1
skip_exit_numbers=0
[sound]
queue_length=200
____________________________
HTC Topaz Touch Diamond 2
HTC Trinity P3600/Orange M700
Working here full screen, make sure that you use advance config tool to disable cab security warnings, and that your version has the wvga skin in the data.zip.
The cab security warnings were stopping a few things from working, and at first it wouldnt start witth it.
I have tried to install i-go 8 and it says it has installed but when i try and run it nothing happens? I have turned off cab warning etc, but still no luck. can anyone provide any help or advice in to waht i am doing wrong.
Can you place a little more detail on your comment below???
"you need to use DATA.ZIP and BRANDING.ZIP v10 from LZF to use this native resolution. "
not sure i know what LZF is.....or where to get v10?
Sorry for breaking into this topic, but I have the problem that I cannot view any map. Do they have to be installed seperately?
Will X1 settings for iGO 8 work on the D2?
Used to have the SE X1 and had iGO8 running perfect.
I've tried the SYS files mentioned in this thread but with no luck?!
The app seems to start for about 3 sec but then nothing...
Any hints would be great!
You may have a mimatch in versions of the programs/maps. certain maps will work with pre-8.3 and others will only work 8.3 or better.
NLCJ - YOu probably have a map / Version issue. (using 8.0 maps with 8.3 igo. look into that further, or better yet, buy the program! it is very good)
mickek - let me knwo what version of igo you are using, then let me know what is in you data.zip / igo_ui filder (320_480 and so on) i can send you the proper sys file after i know those things....
igo8 not full screen
I have version 8.3.2.93112 running on my diamond 2, only one problem : not full screen. There's about 1.3 cm at the bottom of the screen not used. I tried the sys.txt above, but no change. Can someone point me in the right direction? Trying to find the DATA.ZIP and BRANDING.ZIP v10 from LZF, but no luck up to now.
meebie someone can upload a working version to rapidshare ?
igo 8.3.2.83157
jlp_svk said:
Anybody managed to get it work??? I get blank screen...please, write me your sys.txt.
OK...found the right combinations...
Here's my SYS.TXT, which is working perfectly...remember...you need to use DATA.ZIP and BRANDING.ZIP v10 from LZF to use this native resolution.
Code:
[folders]
app="%SDCARD%/iGO8"
[interface]
skin="ui_igo8"
resolution_dir="800_480"
vga=0
maxzoom2d=6000000
show_exit=1
laneinfo_signpost_enabled=0
[rawdisplay]
driver="gdi"
class="landscape"
highres=0
screen_x=800
screen_y=480
[map]
2dheadup=1
3d_max_tiltlevel=9000
3d_default_tiltlevel=9000
3d_max_zoomlevel=500
3d_min_zoomlevel=40
3d_max_zfar=500
3d_scale_carmodel=1
3dcarsizemin=4000
3dcarsizemax=6000
3dcarsizemul=10000
[roundaboutcam]
enabled=0
centery=20
[screen]
menu_animation=0
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[navigation]
show_current_city=1
show_countrychange=1
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=1
show_oneway=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
autosave=1
cache=4096
[warning]
speedwarn_alt_builtup_based=0
speedcam_visualtype=1
speedcam_soundtype=2
speedwarn_tolerance=100
[sound]
sound_q_length=200
queue_length=200
ding=1
[msnd]
msnd.start=0
[gps]
set_messages=0
port=4
baud=4800
Click to expand...
Click to collapse
Try adding:
[device]
sdcard_dsk_num=7
i have it all running ok but i have problem the gps disconnects if i go into standby mode or make a call and then igo 8 will not re establish a connection and have to exit and re start igo 8 is this a known problem or is my gps faulty and anyone else experienced this.
If you have problems
delete the whole sys.txt and start from scratch.
The sys.txt can easily conflict with settings in the software and with skins.
mine is prety empty and working..for me ( I use a modded data zip)
[device]
type="Touch Diamond II"
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
mapfontscale=200
[interface]
resolution_dir="400_240"
vga=1
[rawdisplay]
class="landscape"
screen_x=800
screen_y=480
high_res=1
check also if there are 2 sys.txt. (programmfiles and the igo8 directory on the sd card)
keep them the same.
another version of IGo
try Nav N Go iGO8 v8.3.2.91972 (May 28 2009) or Nav N Go iGO 8 R3 - v8.3.2.83157 (Apr 3 2009). Didn't have to modify anything (or very very little - like a line or two in sys.txt)
Look here for DATA.ZIP v10, v10a and v10b and BRANDING.zip for 800x480/480x800 res:
http://forum.ppcwarez.org/viewtopic.php?f=255&t=56295
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Landscape SYS.TXT:
[device]
type="Touch Diamond II"
[interface]
show_exit=1
resolution_dir="800_480"
vga=0
maxzoom2d=6000000
mapfontscale=200
[rawdisplay]
driver="gdi"
class="landscape"
highres=0
screen_x=800
screen_y=480
Portrait SYS.TXT:
[device]
type="Touch Diamond II"
[interface]
show_exit=1
resolution_dir="480_800"
vga=0
maxzoom2d=6000000
mapfontscale=200
[rawdisplay]
driver="gdi"
class="portrait"
highres=0
screen_x=480
screen_y=800
Sincerely yours.
Brightness Control
I cant manage to get iGO8 control TD2 brightness,
in all settings i tried controls dont even appear except if i write in SYS.TXT:
[device]
type="HTC Touch HD T8282"
this is only way controls appear but still not working.
how can it be maid?
bnm7bnm said:
I cant manage to get iGO8 control TD2 brightness,
in all settings i tried controls dont even appear except if i write in SYS.TXT:
[device]
type="HTC Touch HD T8282"
this is only way controls appear but still not working.
how can it be maid?
Click to expand...
Click to collapse
When you choose [device] type="HTC Touch HD T8282 iGO8 is taking settings from the file data.zip.
In data.zip\config\devices you wil find a HTC Touch HD T8282.ini which contains following:
info_names="HD"
[device]
SDCard_dsk_num=7
[gps]
port="4"
baud="57600"
[rawdisplay]
highres=0
autoconfig=1
driver="gdi"
[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max = 10
backlight_min = 1
backlight_reverse = 0
backlight_key_bright_BA1 = "Brightness"
backlight_key_bright_AC1 = "ACBrightness"
backlight_key_bright_BA2 = "BacklightLuminanceLevel"
backlight_key_bright_AC2 = "ACBacklightLuminanceLevel"
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 25
backlight_events = 3
[interface]
use_big_lang_flag=1
Maybe you can find your answer in here, try to change: backlight_reverse = 0 in 1.
Please let us know if it works or if you found something else.
Tom Lenferink said:
When you choose [device] type="HTC Touch HD T8282 iGO8 is taking settings from the file data.zip.
In data.zip\config\devices you wil find a HTC Touch HD T8282.ini which contains following:
info_names="HD"
[device]
SDCard_dsk_num=7
[gps]
port="4"
baud="57600"
[rawdisplay]
highres=0
autoconfig=1
driver="gdi"
[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max = 10
backlight_min = 1
backlight_reverse = 0
backlight_key_bright_BA1 = "Brightness"
backlight_key_bright_AC1 = "ACBrightness"
backlight_key_bright_BA2 = "BacklightLuminanceLevel"
backlight_key_bright_AC2 = "ACBacklightLuminanceLevel"
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 25
backlight_events = 3
[interface]
use_big_lang_flag=1
Maybe you can find your answer in here, try to change: backlight_reverse = 0 in 1.
Please let us know if it works or if you found something else.
Click to expand...
Click to collapse
i created "htc topaz.ini" in data zip and pasted there settings from HD, D1, TP, 3G and another htc that was in data.zip and none of there works for topaz...
ill try edit setting as you said later.
bnm7bnm said:
i created "htc topaz.ini" in data zip and pasted there settings from HD, D1, TP, 3G and another htc that was in data.zip and none of there works for topaz...
ill try edit setting as you said later.
Click to expand...
Click to collapse
I found the answer for your question in the system.ini which is located in the save folder on your storagecard.
Content (part) of system.ini:
[map]
rasterorder=""
viewpreset_front1="30,100,7200,10"
viewpreset_front2="70,7000,6000,10"
viewpreset_top="600,50000,225,10"
viewpreset_front3="70,7000,6000,10"
map_mode="2D"
nightmode_dependent_backlight="1"
auto_nightmode="1"
follow_gps="1"
rotation="0"
3d_buildings_distance="3"
On my iGO8 i can't change it in the menu but it works, just change following lines or if missing add them under [map]:
nightmode_dependent_backlight="1"
auto_nightmode="1"
Sincerely,
Tom.
I have an official Igo8 8.3.2 release.
I would like to compare our settings in order to get working sys.txt files and also to have speedcam alerts and voices to our Rhodiums.
Actually, I haven't been able to use any skins available.
Do you have any hint?
What about having speedcam voices and alerts?
As far as I know it works right out of the box.
The only problem I have is the blue sign board which are much too high (doubled in size)
Do you know if Egypt map is available or not??
here's mine:
[folders]
app="Opslagkaart/iGo8"
[interface]
maxzoom2d=6000000
show_exit=1
popup_info=1
poi_show_all_btn=1
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
[debug]
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
skip_eula=1
show_pedestrian=1
poi_labels=1
show_arrows_on_route=1
tts_min_ready_wav=1
tts_getaway_time=200
tts_expected_engine_delay=1400
reserve_memory=2097152
sound_q_length="200"
no_file_cache="0"
cache="1024"
enable_roadshadow=1
[map]
popup_info=1
show_labels=1
3d_max_tiltlevel=9000
[msnd]
msnd.start=0
[tts]
tts_buffer=131072
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
announce_exit_directions=1
skip_exit_numbers=0
[sound]
queue_length=200
Click to expand...
Click to collapse
My Igo 8 did not work in full screen any tips
using pro 2
egyled said:
using pro 2
Click to expand...
Click to collapse
- Are you using a WVGA skin?
- Modify settings (manually) to:
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
Does anyone have TTS files that works with the latest IGO8 June 25 version?
Blackbird-ce said:
- Are you using a WVGA skin?
- Modify settings (manually) to:
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
Click to expand...
Click to collapse
My TP2 will not run in wvga but only in a very long vga mode (or qvga?)
all buttons are very long and all dimka wvga skins are not selectable in the skin menu.
I've removed the 'save' folder and changed the sys.txt
i've included this:
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
in txt and tryed running igo with only these lines in the sys file. but not working.
anybody a working solution?
Thanks in advance and sorry for the poor English
Ranney
you should change
highres=1
to
highres=0
Having this parameter being set to "1" results with all the object sizes being multiplied by a factor of 2.
This was introduced in early iGO8 releases to work correctly with VGA (640x480) screens when using QVGA (320x240) skins.
You can use native TP2's resolution (800x480) when using either native skin or any other supporting it - please refer to Gurjon (http://www.gurjon.com) offering 800x480 derivative (there is no 480x800 option) or Dimka (http://www.igo8mods.com/dimka_download.htm#language) offering both 800x480 & 480x800 resolutions.
Please note, that to use TP2 in it's native resolution you will also need modifierd branding/data(.zip) files.
ksmm said:
you should change
highres=1
to
highres=0
Having this parameter being set to "1" results with all the object sizes being multiplied by a factor of 2.
This was introduced in early iGO8 releases to work correctly with VGA (640x480) screens when using QVGA (320x240) skins.
You can use native TP2's resolution (800x480) when using either native skin or any other supporting it - please refer to Gurjon (http://www.gurjon.com) offering 800x480 derivative (there is no 480x800 option) or Dimka (http://www.igo8mods.com/dimka_download.htm#language) offering both 800x480 & 480x800 resolutions.
Please note, that to use TP2 in it's native resolution you will also need modifierd branding/data(.zip) files.
Click to expand...
Click to collapse
Thank you for this clear explenation. it's working!
Thank you again.
Gr, Ranney
I would like to have a solution for not being able to use the hardware keyboard. Instead the software keyboard must be used.
(When this is solved my next question is: Is it possible to not see the software keyboard when there is a hardware keyboard present?)
Help.....
Hey Guys...here are the things I did....
I downloaded the skins, audio etc from http://www.igo8mods.com/dimka_download.htm
Changed the System.txt in igo8 folder as in the 4th post....
But nothing has changed when I start the software....and through settings when I go to Skins, I dont see any of the options I placed in the appropriate folders. What am I doing wrong? Any help is appreciated, Thanks.....
iGO8 lists only skins fitting into the current settings, thus either you did something wrong when modifying sys.txt or you have downloaded not the right skin.
BTW. Which copy of sys.txt have you modified?
There are (typically) two copies: one on your SD card and another one in main memory of your device (program files\iGO8).
iGO8 uses a copy of sys.txt located in a directory it has been started from (typically from the main memory).
I can use iGo in VGA on my TP2 and it will not fill up the screen. When I change the system text to WVGA it gives me an error while booting about the scheme not being compatible and then closes. Any idea's what I can do? Not sure what scheme to put in there that will work?
[email protected] said:
I can use iGo in VGA on my TP2 and it will not fill up the screen. When I change the system text to WVGA it gives me an error while booting about the scheme not being compatible and then closes. Any idea's what I can do? Not sure what scheme to put in there that will work?
Click to expand...
Click to collapse
This is what I use on my Sprint TP2
[phone]
driver="TAPI"
exe_path="\Windows\cprog.exe"
win_name="Phone"
[folders]
app="%SDCARD%/iGO8"
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[screen]
autoscroll_on_click=1
[tripcomputer]
num_of_trips=4 ;default igo8 has 3
[smartzoom]
minangle=0
maxangle=85
[tts]
tts_buffer=65536
priority="HIGH"
announce_exit_directions=1
skip_exit_numbers=0
announce_street_name=1
always_say_road_names=1
supress_trivial_left=1
supress_trivial_right=1
supress_straight=1
supress_highway_enter=1
tts_logics=3; ([0],1,2,3 higher more detailed)
;traincrossing=1
tts_min_ready_wav=1
tts_getaway_time=200
tts_expected_engine_delay=1400
announce_exit_directions=1
recalc_voice=0
[3d]
guidancearrow_first_size=1.1 ;scale of 1st arrow
guidancearrow_first_alpha=24 ;transp of 1st arrow
guidancearrow_second_size=0.8
guidancearrow_second_alpha=12
3d_tmc_road_extra_width=200 ;
use_all_building_textures=1 ;
[3d_config]
roadsign_lines_per_screen=18
rotated_roadsigns=1
[map]
zoomscale_disappearing=1 ;works with show_zoombar
auto_nightmode=1
mapfontscale=200
inertia_on_map_move=1
popup_info=1
shields=1
textured_poly=1
3d_landmarks=1
3d_buildings=1
3d_dem=1
terrain_in_2d=1
3d_roads=1
3d_tunnels=1
3d_max_tiltlevel=7500
3d_max_zoomlevel=2000
3d_min_zoomlevel=40
3d_max_zfar=500
3d_scale_carmodel=1
3dcarsizemin=2500
3dcarsizemax=5000
3dcarsizemul=15000
Follow_gps=1
Show_labels=1
Show_oneway=1
2dheadup=1
[gps]
port=4
baud=auto
background_navigation=1
disable_advanced=0
[debug]
show_pedestrian=1
cache=2048 ;control the cache size used by iGo
no_extrapolation=0 ;estimate calculation when gps signal temporarily lost (tunnels etc)
smart_2d=1 ;value: 0,1 - Turns on Smart 2D
compass_type=3 ;compass type can be 0,1,2,3
saved_config_available=1
show_poi_boundingrects=1
show_poi_areas=1
poi_labels=1
enable_buildings=1
enable_roadshadow=1
enable_roadsign=1
show_lane_info=1
bringtotop_afterresume=1 ; new
mute_os_key=1
speedcam_enabled=1
enable_landmark_occlusion=1
[interface]
maxzoom2d=6000000
no_gps_lost_warning=1 ;no audio message if gsp lost
drive_carefully=0 ;skip the annoying drive safe announcement
show_exit=1
autotilt=1
defaulttilt3d=80000
popup_info=1
[mydata]
max_favorites=20
empty_favorites=1
num_favicons=10
max_history=60
[msnd]
msnd.start=0
[sound]
ding=0
auto_mute=0
use_os_volume=1
voice_muted=0
voice_volume=255
sound_muted=0
sound_volume=255
incomingcallsetting=1
[navigation]
autoreplan_action="AUTO"
show_current_city=1
Gps_pos_to_road=1
[rawdisplay]
Driver=gdi
class="auto"
highres=0
screen_x=800
screen_y=480
[power]
backlight_day=100
backlight_night=50
backlight_slow_api=1
backlight_sync_with_OS=0
battery_warning_limit=10
powermgm_state=0
skip_resume_process=1
skip_suspend_process=1
[speedcam]
disable="_SUI", "_GER", "_AUT"
enable_at_startup=1
speedcam_sound="!alert1"
[warning]
approach_beep_distances=200
approach_beep_sound="!sectionbeepB"
max_section_time=240
overspeed_sound= "!alert3" ;speedcam sound
pedestrian_warning_threshold=10
pedestrian_warning=0
section_beep_distance=200
section_beep_sound= "!sectionbeepA"
section_end_sound= "!sectionend"
section_start_sound="!sectionstartA"
speedcam_max_angle=20
speedcam_max_lookahead=400
speedcam_maxdistance_from_road=0
speedcam_snap_distance=200
speedcam_soundtype=1
speedcam_visualtype=1
speedcam_warning=1
speedlimit_warning_visual=1
speedlimit_warning_voice=0
speedlimit_warning=1
speedwarn_alt_builtup_based=1
speedwarn_alt_limit=1
speedwarn_alt_tolerance=0
speedwarn_alt_toltype=0
speedwarn_tolerance=110
speedwarn_toltype=0
warn_distances=130:450,110:350,90:300,60:200,40:10 0 ;These numbers are apparently in the format of Speed : Distance.
[poi]
enable_pois_before_080217=1
Using the sys.txt file above and the GJ6.9.3p 800x480 Skin available here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems to be something to do with my scheme files. What scheme are you using???
Error
I have been using iGo8 for couple days now.
Today, when I turn on the program. I got this error message and I was wondering if someone could help me out.
ERROR:
"Failed to reserve virtual address space"
Tried to uninstall, and reinstall and still get the error message.
Ut0p1a said:
I have been using iGo8 for couple days now.
Today, when I turn on the program. I got this error message and I was wondering if someone could help me out.
ERROR:
"Failed to reserve virtual address space"
Tried to uninstall, and reinstall and still get the error message.
Click to expand...
Click to collapse
No need to install or reinstal. Just make a soft reset and it'll start again. This worked for me, when I got that message.
I' ve read about it somewhere, TP2 has some memory issues and that's why you get this error.
Anyway soft reset helps
Sorry, if this is a question that has been posted before, but can i use my copy of IGO8 and take it from my old device to my TP2 (UKtmobile)?
I've tried just dumping the IGO8 folder and files onto my storage card and have been trying to run it from there but (through "file explorer"), but after displaying the splash screen for a few seconds, the program exits back to file explorer. Trying to run it again gives me a message that the program still has not exited from the previous time i ran it. i'm guessing its not as simple as being able to remove the software from one device and putting it on another? I've seen a few people have mentioned that by changing the sys.txt file you can get it to work. the problem is, i dont understand what might need changing?!
I have below a copy of my old sys file:
[folders]
app="%Storage Card%/IGO8"
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[screen]
autoscroll_on_click=1
[tripcomputer]
num_of_trips=3
[smartzoom]
minangle=0
maxangle=85
[tts]
tts_buffer=65536
priority="HIGH"
announce_exit_directions=1
skip_exit_numbers=0
announce_street_name=1
always_say_road_names=1
supress_trivial_left=1
supress_trivial_right=1
supress_straight=1
supress_highway_enter=1
tts_logics=3
;traincrossing=1
tts_min_ready_wav=1
tts_getaway_time=200
tts_expected_engine_delay=1400
announce_exit_directions=1
recalc_voice=0
[3d]
guidancearrow_first_size=1.1
guidancearrow_first_alpha=24
guidancearrow_second_size=0.8
guidancearrow_second_alpha=12
3d_tmc_road_extra_width=200
use_all_building_textures=1
[3d_config]
roadsign_lines_per_screen=18
rotated_roadsigns=1
[map]
zoomscale_disappearing=1
auto_nightmode=1
mapfontscale=200
inertia_on_map_move=1
popup_info=1
shields=1
textured_poly=1
3d_landmarks=1
3d_buildings=1
3d_dem=1
terrain_in_2d=1
3d_roads=1
3d_tunnels=1
3d_max_tiltlevel=7500
3d_max_zoomlevel=2000
3d_min_zoomlevel=40
3d_max_zfar=500
3d_scale_carmodel=1
3dcarsizemin=2500
3dcarsizemax=5000
3dcarsizemul=15000
Follow_gps=1
Show_labels=1
Show_oneway=1
2dheadup=1
[gps]
port=4
baud=auto
background_navigation=1
disable_advanced=0
[debug]
show_pedestrian=1
cache=2048
no_extrapolation=0
smart_2d=1
compass_type=3
saved_config_available=1
show_poi_boundingrects=1
show_poi_areas=1
poi_labels=1
enable_buildings=1
enable_roadshadow=1
enable_roadsign=1
show_lane_info=1
bringtotop_afterresume=1
mute_os_key=1
speedcam_enabled=1
enable_landmark_occlusion=1
[interface]
maxzoom2d=6000000
no_gps_lost_warning=1
drive_carefully=0
show_exit=1
autotilt=1
defaulttilt3d=80000
popup_info=1
[mydata]
max_favorites=20
empty_favorites=1
num_favicons=10
max_history=60
[msnd]
msnd.start=0
[sound]
ding=0
auto_mute=0
use_os_volume=1
voice_muted=0
voice_volume=255
sound_muted=0
sound_volume=255
incomingcallsetting=1
[navigation]
autoreplan_action="AUTO"
show_current_city=1
Gps_pos_to_road=1
[rawdisplay]
Driver=gdi
class="auto"
highres=0
screen_x=800
screen_y=480
[power]
backlight_day=100
backlight_night=50
backlight_slow_api=1
backlight_sync_with_OS=0
battery_warning_limit=10
powermgm_state=0
skip_resume_process=1
skip_suspend_process=1
[speedcam]
disable="_SUI", "_GER", "_AUT"
enable_at_startup=1
speedcam_sound="!alert1"
[warning]
approach_beep_distances=200
approach_beep_sound="!sectionbeepB"
max_section_time=240
overspeed_sound= "!alert3" ;speedcam sound
pedestrian_warning_threshold=10
pedestrian_warning=0
section_beep_distance=200
section_beep_sound= "!sectionbeepA"
section_end_sound= "!sectionend"
section_start_sound="!sectionstartA"
speedcam_max_angle=20
speedcam_max_lookahead=400
speedcam_maxdistance_from_road=0
speedcam_snap_distance=200
speedcam_soundtype=1
speedcam_visualtype=1
speedcam_warning=1
speedlimit_warning_visual=1
speedlimit_warning_voice=0
speedlimit_warning=1
speedwarn_alt_builtup_based=1
speedwarn_alt_limit=1
speedwarn_alt_tolerance=0
speedwarn_alt_toltype=0
speedwarn_tolerance=110
speedwarn_toltype=0
warn_distances=130:450,110:350,90:300,60:200,40:10 0.
[poi]
enable_pois_
Can anyone advise if there is anything i can do, or if I am best of buying a new copy for my TP2?
thanks, and again apologies if this has been asked before.
Q99
Ok,,,,,,,,,,,,,, Maybe I am missing something or doing it all completely wrong. I am not as advanced as most of you guys but I do have a general idea.
Igo 8 worked fine on my TD 1 but since loading it on my TD 2, Nothing. Initiate and it returns to the "Today" screen.
So........................ Who is brave enough to make this thread work and give all instructions needed, as if to a child, to make this program work.
What works with what? What changes to sys files etc, what changes to "Branding".
Please, Please, Please, Please, Please, Please, Please, Please, Please,
Pete
Peterjfinch said:
Ok,,,,,,,,,,,,,, Maybe I am missing something or doing it all completely wrong. I am not as advanced as most of you guys but I do have a general idea.
Igo 8 worked fine on my TD 1 but since loading it on my TD 2, Nothing. Initiate and it returns to the "Today" screen.
So........................ Who is brave enough to make this thread work and give all instructions needed, as if to a child, to make this program work.
What works with what? What changes to sys files etc, what changes to "Branding".
Please, Please, Please, Please, Please, Please, Please, Please, Please,
Pete
Click to expand...
Click to collapse
And once again, TD1 is VGA 640x480 and TD2 is WVGA 800x480!!! that's why a direct copy from a TD1 onto a TD2 doesn't work!
Search the Topaz forum and you will find how to install iGO8 on a TD2 without any problems.
Please, Please, Please, Please, Please, Please, Please, Please, Please, don't make new threads of allready existing topics!!!
igo 8 works great on td2 but hardware volume not. (yet)
Tom Lenferink said:
And once again, TD1 is VGA 640x480 and TD2 is WVGA 800x480!!! that's why a direct copy from a TD1 onto a TD2 doesn't work!
Search the Topaz forum and you will find how to install iGO8 on a TD2 without any problems.
Please, Please, Please, Please, Please, Please, Please, Please, Please, don't make new threads of allready existing topics!!!
Click to expand...
Click to collapse
Thank You Tom. I have very limited online time and am not as clever as Many on here. If I had the time to search through many fragmented threads, I would. In fact, I would suggest that IF! some of the real smart people on here, would make this thread work, there would be less new threads about this subject, IMHO.
So. Please, Oh mighty and intelegent people. Make this thread right and child friendly, to save everyone a lot of wasted time and frustration.
Thanks
Pete
Peterjfinch said:
Thank You Tom. I have very limited online time and am not as clever as Many on here. If I had the time to search through many fragmented threads, I would. In fact, I would suggest that IF! some of the real smart people on here, would make this thread work, there would be less new threads about this subject, IMHO.
So. Please, Oh mighty and intelegent people. Make this thread right and child friendly, to save everyone a lot of wasted time and frustration.
Thanks
Pete
Click to expand...
Click to collapse
Followings works with: iGO8 v8.3.2.97313 on a HTC TD2 aka Topaz:
Copy everything as you did on your TD1 on your TD2.
Edit your SYS.TXT on your TD2 with following lines:
===============================
For Landscape:
[project]
name="igo8_pda"
[device]
type="Touch Diamond2 T5353"
[interface]
show_exit=1
resolution_dir="800_480"
vga=1
maxzoom2d=6000000
mapfontscale=200
[rawdisplay]
driver="gdi"
class="landscape"
highres=0
screen_x=800
screen_y=480
===============================
For portrait:
[project]
name="igo8_pda"
[device]
type="Touch Diamond2 T5353"
[interface]
show_exit=1
resolution_dir="480_800"
vga=1
maxzoom2d=6000000
mapfontscale=200
[rawdisplay]
driver="gdi"
class="portrait"
highres=0
screen_x=480
screen_y=800
===============================
Good luck!
Other thread about iGO8 on TD2: http://forum.xda-developers.com/showthread.php?t=508358
Here you can find the iGO8 v8.3.2.97313, I downloaded this one and it works on my TD2: MOD EDIT WAREZ LINK REMOVED
password: squirrel
The complete newbie guide for iGO8
The sys.txt provided here, Was made by shadowline, (Big thanks to you)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Be sure to have the latest versio (June 8, 09)
Insert your needed files in the content directory,
Like this:
General rule:
Code:
*.fbl at "map"
*.poi at "POI"
*.3dl, *.3dc at "building"
*.dem at "dem"
*.spud at "speedcams"
**_voice*.zip at "voice"
**land*.zip at "lang"
When you done that, edit your sys.txt and set it like this:
Code:
[interface]
maxzoom2d=60000
show_exit=1
shutdown_time=0
show_orientation=1
mapfontscale=160
vga=0
popup_info=1
poi_show_all_btn=1
defaultzoom2d=200
defaultzoom3d=100
defaulttilt3d=80000
autotilt=1
autotilt_minzoom3d=10
autotilt_maxzoom3d=100
[rawdisplay]
highres=0
autoconfig=1
driver="gx"
;gx gdi
[3d_config]
roadsign_lines_per_screen=30
rotated_roadsigns=1
[map]
2dheadup=1
;3dcarsizemin=30
;3dcarsizemax=40
;3dcarsizemul=20
show_oneway=1
3d_max_tiltlevel=8200
3d_min_zoomlevel=10
3d_max_zoomlevel=100
3d_max_zfar=500
3d_scale_carmodel=1
3dcarsizemin=4000
3dcarsizemax=6000
3dcarsizemul=10000
3d_zfar_horizon_ratio = 100
3d_roads=1
3d_tunnels=1
max_poly_segments_shown_1=400 ;makes map drawing a lot faster
min_poly_segments_shown_1=200 ;makes map drawing a lot faster
[smartzoom]
enabled="1"
restore_smartzoom_on="1"
minzoom=10
maxzoom=100
minangle=8
maxangle=85
overview_zoomlevel=5000
overview_distance=20000
[roundaboutcam]
enabled=1
centery=50
[sound]
sound_q_length=200
queue_length=200
[msnd]
enabled=0
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=0
show_oneway=1
show_speed_limit=1
skip_eula=1
enable_roadshadow=1
show_oneway_3d=1 ; 3d arrows in one way streets
show_oneway=1
show_arrows_on_route=1
show_lane_info=1
show_roadid=1
Boot up iGO8, It could take a while for it to recognise your content folder
Go into settings, Set everything to your liking,
At GPS settings:
Code:
Port: COM4
Baud Rate: AUTO
Exit the application, Restart it, Go outside & enjoy
If you wan't to be sure that you have the latest version take v8.3.2.97313 Jul 3 2009!!!
Download it here: MOD EDIT WAREZ REMOVED
And for Touch Diamond 2 aka Topaz make a sys.txt like this:
Code:
[project]
name="igo8_pda"
[device]
type="Touch Diamond2 T5353"
[folders]
app="Opslagkaart/iGO8"
Where ofcourse SD-Card should be where Opslagkaart is, or whatever you see in File Explorer.
That's enough because [device] type="Touch Diamond2 T5353" looks for data.zip\config\devices\Touch Diamond2 T5353.ini with contains following lines:
Code:
info_names="Touch Diamond II"
[gps]
port=4
baud=57600
[device]
SDCard_dsk_num=7
;[power]
;backlight_manage_values=1
;backlight_max = 10
;backlight_min = 0
;backlight_reverse = 0
;backlight_key_bright_BA1 ="Brightness"
;backlight_key_bright_AC1 ="ACBrightness"
;backlight_key_timeout_BA = "BatteryTimeout"
;backlight_key_timeout_AC = "ACTimeout"
;backlight_key_ontap_BA = "BacklightOnTap"
;backlight_key_ontap_AC = "ACBacklightOnTap"
;backlight_key_on_BA = "OnOff"
;backlight_key_on_AC = "ExtOnOff"
;backlight_methods = 1 , 25
;backlight_events = 1, 5, 7
;backlight_slow_api=1
[rawdisplay]
highres=0
autoconfig=1
[interface]
use_big_lang_flag=1
;[interface]
;resolution_dir="800_480"
;vga=1
;[rawdisplay]
;class="landscape"
;highres=1
;screen_x=800
;screen_y=480
[power]
backlight_max = 9
backlight_min = 1
backlight_reverse = 0
backlight_key_bright_BA1 ="Brightness"
backlight_key_bright_AC1 ="ACBrightness"
backlight_key_bright_BA2 ="BacklightLuminanceLevel"
backlight_key_bright_AC2 ="ACBacklightLuminanceLevel"
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 1, 5, 6, 7, 8, 10, 12, 18, 21, 23, 24, 25, 26, 27, 28, 33, 36, 37, 39, 40, 42, 46, 49, 50, 52, 53, 54
backlight_events = 1
backlight_slow_api = 1
[modules]
IPOWER_DRIVER="PDA_POWER_DRIVER"
[power]
suspend_state_define="Unattended"
resume_state_define="On"
Everything found in this ini file you don't need to put in your sys.txt.
Actualy, when you put [device] type="Touch Diamond2 T5353" in your sys.txt everything found in that ini is used and all other lines from sys.txt are ignored.
Above is for landscape, if you want portrait change:
Code:
;[interface]
;resolution_dir="800_480"
;vga=1
;[rawdisplay]
;class="landscape"
;highres=1
;screen_x=800
;screen_y=480
in:
Code:
;[interface]
;resolution_dir="480_800"
;vga=1
;[rawdisplay]
;class="portrait"
;highres=1
;screen_x=480
;screen_y=800
Warez posting
you are posting warez....links removed
THIS IS YOUR ONLY WARNING ON THIS MATTER.
thank you
Lol, I saw that Tom left the links in
It's because those images enc come from one and the same place
Anyhow, Tom's picture is the PDA version, Mine is the smartphone version (I guess)
It works... thats all that matters x)
@ Tom, All those extra options in the sys.txt aren't necessary ;-)
En eh... Geen warez meer posten maat ;-)
jeutie said:
Lol, I saw that Tom left the links in
It's because those images enc come from one and the same place
Anyhow, Tom's picture is the PDA version, Mine is the smartphone version (I guess)
It works... thats all that matters x)
@ Tom, All those extra options in the sys.txt aren't necessary ;-)
En eh... Geen warez meer posten maat ;-)
Click to expand...
Click to collapse
Which extra options in the sys.txt are your refering to that aren't necessary?
PM me for links!
liamhere said:
you are posting warez....links removed
THIS IS YOUR ONLY WARNING ON THIS MATTER.
thank you
Click to expand...
Click to collapse
Sorry, my bad, i will try not to let it happen again.
As you might have noticed i'm also posting in other forums where it is allowed, sometimes i mix up the forums.
[project]
name="igo8_pda"
[device]
type="Touch Diamond2 T5353"
;[power]
;backlight_manage_values=1
;backlight_max = 10
;backlight_min = 0
;backlight_reverse = 0
;backlight_key_bright_BA1 ="Brightness"
;backlight_key_bright_AC1 ="ACBrightness"
;backlight_key_timeout_BA = "BatteryTimeout"
;backlight_key_timeout_AC = "ACTimeout"
;backlight_key_ontap_BA = "BacklightOnTap"
;backlight_key_ontap_AC = "ACBacklightOnTap"
;backlight_key_on_BA = "OnOff"
;backlight_key_on_AC = "ExtOnOff"
;backlight_methods = 1 , 25
;backlight_events = 1, 5, 7
;backlight_slow_api=1
[power]
backlight_max = 9
backlight_min = 1
backlight_reverse = 0
backlight_key_bright_BA1 ="Brightness"
backlight_key_bright_AC1 ="ACBrightness"
backlight_key_bright_BA2 ="BacklightLuminanceLevel"
backlight_key_bright_AC2 ="ACBacklightLuminanceLevel"
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 1, 5, 6, 7, 8, 10, 12, 18, 21, 23, 24, 25, 26, 27, 28, 33, 36, 37, 39, 40, 42, 46, 49, 50, 52, 53, 54
backlight_events = 1
backlight_slow_api = 1
[modules]
IPOWER_DRIVER="PDA_POWER_DRIVER"
[power]
suspend_state_define="Unattended"
As you will edit that in your preferences ;-)
En ik zou ook niet reffereren naar warez links ;-) het mag hier gewoon niet!!
resume_state_define="On"
I just installed the iGO8 v8.3.2.97313 and having problems with it
It starts with a main screen in the landscape mode as it sholud, but after few seconds it returns to htc home.
sys.txt that I'am using is
Code:
[folders]
app="%SDCARD%/iGO8"
[project]
name="igo8_pda"
[device]
type="Touch Diamond2 T5353"
[interface]
skin="ui_igo8"
resolution_dir="800_480"
vga=0
maxzoom2d=6000000
show_exit=1
laneinfo_signpost_enabled=0
[rawdisplay]
driver="gdi"
class="landscape"
highres=0
screen_x=800
screen_y=480
[map]
2dheadup=1
3d_max_tiltlevel=9000
3d_default_tiltlevel=9000
3d_max_zoomlevel=500
3d_min_zoomlevel=40
3d_max_zfar=500
3d_scale_carmodel=1
3dcarsizemin=4000
3dcarsizemax=6000
3dcarsizemul=10000
[roundaboutcam]
enabled=0
centery=20
[screen]
menu_animation=0
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[navigation]
show_current_city=1
show_countrychange=1
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=1
show_oneway=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
autosave=1
cache=4096
[warning]
speedwarn_alt_builtup_based=0
speedcam_visualtype=1
speedcam_soundtype=2
speedwarn_tolerance=100
[sound]
sound_q_length=200
queue_length=200
ding=1
[msnd]
msnd.start=0
[gps]
set_messages=0
port=4
baud=4800
any clues what might be wrong
thanks in advance
Do you get any kind of error?
If there is something wrong with your sys, you should get a error from the application
For all users of IGO, Miomap and other GPS software, for updates, ideas, modifications etc. a good forum here gpsforum.biz.
jeutie said:
Do you get any kind of error?
If there is something wrong with your sys, you should get a error from the application
Click to expand...
Click to collapse
No i dont get any error it just returns to htc home
Thats weird :-s Then, I don't know a answer
Maybe a corrupt iGO8 folder(?)
Start with a 'clean' sys.txt with only following:
Code:
[folders]
app="%SDCARD%/iGO8"
[project]
name="igo8_pda"
[device]
type="Touch Diamond2 T5353"
With [device] type="Touch Daimond2 T5353" iGO8 will load all device settings for the TD2/Topaz from data.zip\config\device\Touch Daimond2 T5353.ini
When that works you can add more line in your sys.txt but as far as i know iGO8 ignores then because it reads the Touch Daimond2 T5353.ini
Haven't got an awful lot more than that in my sys.txt and it seems to be working fine
Code:
[project]
name="igo8_pda"
[device]
type="Touch Diamond2 T5353"
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
With: [device] type="Touch Diamond2 T5353"
You don't need anymore because iGO8 ignores the rest of the sys.txt and only looks at:
data.zip\config\devices\Touch Diamond2 T5353.ini
Like jeutie did in post #12 is useless, he copyd everything from data.zip\config\devices\Touch Diamond2 T5353.ini in his sys.txt and also [device] type="Touch Diamond2 T5353" ?!?!?
GO INTO IGO8-> SYS and add this to it save and enjoy IGO 8 in 800 x 480
[folders]
;app="%SDCARD%/iGO8"
app="\Storage Card\Igo8"
[interface]
skin="ui_igo8"
resolution_dir="400_240"
maxzoom2d=6000000
show_exit=1
screen_x=800
screen_y=480
vga=1
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
driver="GDI"
IF YOU WOULD RATHER RUN IN PORTRAIT:
[rawdisplay]
highres=1
screen_x=480
screen_y=800
class="portrait"
driver="GDI"
Thank you
Worked like a charm
great addition to the sys file. Get a few skins to work that way. Have you found a way to get the car cursor models to work?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This rom is dedicated to my friend Wang Gang. Without his help I may never be able to back to the cooking scene again. Thanks a lot mate for your invaluable support and friendship!!
Download here:
(MD5: 9C6326AC4D75EC85C602EFEA4A077528)
http://bit.ly/bprquS
http://bit.ly/bLooSZ
http://bit.ly/aFySPa
http://bit.ly/92ftDI
History:
Code:
8 June 2010:
* Remove Cookie Home Tab, CHT Editor, Quickmenu, Folderview
* Remove unused files
* Replace Jblend with Jbed
4 June 2010: Initial release.
Features:
Code:
CE OS 5.2.23569 Build 23569.5.5.0
Radio 2.07.50.27_2
AdobePDF 2_5_1_0_404840_03
AdvancedNetwork 1_0_12_1
aGPS_Confirmation 1_0_19213629_00
Album 3_2_20121824_0
App_Service 1_87_0_0
AppointmentEditor 1_0_20113829_0
Arphic_CHS_WWE_Font 1_1_20100104_00
Audio_Booster 2_5_19194032_lo00
Audio_Manager_Engine 2_0_20113121_h
BCR_WWE 1_0_f090914b_02
BluetoothSetting 2_11_1_2
BOGYSOFT Windows Media Player 12 skin
Boot_Launcher 1_0_19221427_1
BrowserSnapshot 1_0_19224019_0
Calculator 1_1_19224019_0
Camera 6_26_20121425_00
ClearStorage 2_3_1_0
CMBandSwitching 2_2_2_0
CMCallBarring 1_3_4_0
CMCallerID 1_5_2_0
CMCallForwarding 1_4_15_0
CMCallWaiting 1_3_2_0
CMInternetSharing 1_2_9_0
CMPhone 1_6_E_0
CMPhoneVMSetting 1_9_0_0
CMPin 1_5_4_0
CMWifiAdvanced 1_0_4_1
CommManager 2_9_V_5
Concurrence_Mgr 1_5_19221227_00
ConnectionSetup 3_1_20123525_02
Contact_Picker 1_0_20113132_00
Contact_Utility_Engine 1_2_20113727_00
DataDisconnect 1_14_0_1
DeviceInfo 2_11_0_0
DigitalCompass 1_0_19221511_0
DRM_Middleware 1_5_19221328_00
Dshow 2_0_20113730_00
Email_Setup_Wizard 2_3_20122125_11
ExtNewPhoneSetting 1_0_1919_3232
Facebook_Engine 1_1_20122025_00
FastConnectLauncher 1_00_03_00
FDC Task Manager
Field_T_e_s_t 2_19_0_0
FlashLiteShareDLL 1_0_19213629_00
FM_Radio 2_5_19194027_01
Footcam 1_26_19213627_00
Footprints_Engine 1_1_19224027_0
FootprintsThumbViewer 1_0_19212227_01
FootPrintsVE 2_0_19221924_00
FormatSD 1_15_0_3
Full_Screen_Player 1_8_20113120_00
G_Sensor_Calibrator 1_1_19223329_0
GoogleLocationService 1_0_1_22
GPS_GMM 4.1.0.44
GroupEditor 1_0_20111733_00
HTCAnimation 1_3_5_2
HTCApplication 1_17_1_0
HTCBirthday 1_2_0_0
HTCBookmark 1_0_20111623_0
HTCFDN 1_11_2_0
HTCFlashlight 1_0_1_1
HTCFont_Link 1_0_19213429_00
HTCFramework 1_5_20132227_00
HTCGeoService 1_0_20112520_00
HTCMessage 1_00_281_0
HTCMessaging_Client 1_5_20121931_01
HTCNaviMgr 1_0_19221430_00
HTCScroll 2_0_19221326_00
HTCSettings 1_4_4_0
HTCStartUp 1_7_0_0
HTCUtil 4_12_0_3
IE6Enhancement 1_0_19224019_0
IME_Engine_Western 2_1_19223325_00
IME_EzInput_Western 2_1_20122024_00
InvokeSIMMgr 1_12_0_2
JbedJava_5_1 0_0_20090217_51R2
LockScreenAppLauncher 1_0_19221331_00
LockstreamDRM 1_2_091113_O9_01
Long_Press_End_Key 1_5_19221332_00
Manila_Calendar 2_5_20111823_0
Manila_DocumentBrowser 2_5_20121926_0
Manila_Footprints 2_5_20111529_0
Manila_Home 2_5_20113626_2
Manila_Internet 2_5_20113925_0
Manila_Mail 2_5_20121822_0
Manila_Message 2_5_20121820_0
Manila_People 2_5_20113030_2
Manila_Photo 2_5_19224023_0
Manila_Settings 2_5_20121231_0
Manila_Stock 2_5_20111730_0
Manila_Twitter 2_5_20112427_0
Manila_Weather 2_5_20121525_0
Media_Tool_kit 1_2_20113121_0
Menu_Enhancement 1_1_20113129_00
Message_Enhancement 1_2_19224032_00
mHub_VO 1_8_091216_0
Mortscript
MP3_Trimmer 1_2_19194032_0
MS_Facebook 1_0_07_1
Mute 1_1_2_0
MyCPL 3_13_0_6
NaviPanel 1_5_19222122_00
NetCF 2.0.7045 & 3.5.9198 (hotfix)
New_Contact_Card 1_1_20113729_0
NewMailAccount 1_11_0_1
Notification_Enhancement 3_5_20121421_00
Office Mobile
Phone_Canvas_Enhancement_2G 4_2_62120113626_0
PhoneSetting 1_66_0_0
Picture_Enhancement 1_50_19221924_00
PKG 1_1_0_0
Power 3_5_1_1
PowerOffWarning 2_9_0_0
Quick_GPS 2_0_19223429_05
QuickMenu
Random_Access 4_2_19183026_0
Redial 1_3_0_0
Resource_Proxy 1_0_20112928_00
Ringtone_Plugin 1_0_19221426_00
RSSHub 2_1_2_1109_01
RunCC 1_2_1_0
Sensor_SDK 4_2_20113726_00
Settings_Improvement 1_0_20111623_2
Shared_Modules 1_01_20113224_00
SharedResource 1_0_20111720_00
SignatureReplace 1_5_0_0
SIM_Mgr 6_79_0_0
SimContactImport 3_4_20111823_00
SimLock 4_28_0_0
SMSInboxThreading 1_38_0_0
Social_Networks_Engine 1_1_20113927_01
StartIconLoader 2_5_20113129_0
STK_Service 4_95_0_0
STK_UIPPC 4_76_0_0
StorageLow 1_0_0_2
Streaming_Media 3_1_20111522_00
Streaming_SDK 2_7_19212819_00
TaskBarIconMgr 2_13_0_0
Teeter 2_0_19223825_00
Text_Selection 1_0_19221329_00
TimeZoneAutoFix 1_0_19222424_01
TMOUS_Manila_Core 2_5_20121412_1
TMOUS_Manila_Music 2_5_19224026_0
USB_To_PC_Pop_Up 2_3_20111720_02
USSD_Service 4_38_0_0
VBookmarkMgr 1_0_19213624_00
Voice_Recorder 2_0_20113911_0
Volume_Control 2_2_20121229_00
WiFiSettings 1_2_5_4
Wi-FiWizard 1_24_2_1
WLANSettings 2_7_10_1
YouTube 2_6_19224122_00
zlibce_m 1_2_30_00
We welcome you, and appreciate your efforts. Keep the good work.
Welcome Sakajati.
After Hyperdracon I am very happy that your cooking for Leo!
Looking forward to more info and images
GREAT!
Good to see you cooking for Leo Sakajati. Am gonna try right away.
Glad to see the chef from my country
Sure I'm gonna flash it and revert to you soon ...
Keep up the good work Bro...
Cheers
welcome here my friend.. i have to see you from Kaiser... good luck m8
Welcome chief
Nice to see you here Chef. I flashed many of your Roms at KAISER FORUM. They were simply the best. Will follow you here!
Hi SJ,
Great to see you here.
LeoDragon instead of HyperDragon.
Will definitely try it.
Downloading
Flashed, no problem.
Installed third party apps.
Everything working as it should and haven't found any bugs.
Will play with it today and report back.
Hey man!!
Congrats on the release!
Nice to see familiar faces from hermes and kaiser days
Peace,
Joshua
Hey thx buddy for this rom..
this is what i needed very badly.. infact i tried many times to create my own rom with the same ingredients.. but always some bugs forced me to flash back to stock 1.66 rom..
will give it a try ..
thx
does this rom got HTC first boot and splash image or t-mobile splash image???
very nice to have you here...looking forward to some great roms.....
Can i flash this rom on a european version oh hd2 or its only for tmous versions?
from what i see its an 6.5 version eh? looks good though!!!!
malias4 said:
Can i flash this rom on a european version oh hd2 or its only for tmous versions?
from what i see its an 6.5 version eh? looks good though!!!!
Click to expand...
Click to collapse
Yes, I flashed it to my European HD2.
tkalli said:
Flashed, no problem.
Installed third party apps.
Everything working as it should and haven't found any bugs.
Will play with it today and report back.
Click to expand...
Click to collapse
Thanks your feedback. I will try it, today
Hey mate its been a long time, glad to see you here
I always went back to using HyperDragon on my kaiser I dont know how else to describe it except to say it felt like a perfect fit for the phone.
It will be good to see what creations you can come with for the Leo. It seems like everyone wants to cook and release Roms now but nothing beats experience
Just dont let all the praise go to your head
Mark.
mskip said:
Hey mate its been a long time, glad to see you here
I always went back to using HyperDragon on my kaiser I dont know how else to describe it except to say it felt like a perfect fit for the phone.
It will be good to see what creations you can come with for the Leo. It seems like everyone wants to cook and release Roms now but nothing beats experience
Just dont let all the praise go to your head
Mark.
Click to expand...
Click to collapse
Agree with you, completely.
Used SJ's ROM on my Kaiser's and they were the best for me.
About praise going to his head, I think he can handle it.
Looking forward to see what he does with COM5.
nice have u here for the HD2 , download ur rom , sofar no bug and stable and i love it because is what i was looking for, stock rom with manila updated it, just wonderful.