I know that there's probably tons of these, but here goes.
Last night, I tried installing 2.3.320, but ended up looping at the eye. I thought I had installed it wrong, so I tried to access bootstrap recovery to delete the data I hadn't cleared. I was surprised to only be able to access the stock bootloader, 30.04. Anyway, I decided to try using an SBF to restore, but I used the wrong one. Bootloader now loads with these messages, "Err:A5,70,70,00,1F" "MEM_MAP Blank" "Service Req'd".
I got my hands on the system only SBF for 2.3.320 that is floating around, but that still isn't fixing my problem.
Simply put, does anybody know of anything I can do now?
silversonic1 said:
I know that there's probably tons of these, but here goes.
Last night, I tried installing 2.3.320, but ended up looping at the eye. I thought I had installed it wrong, so I tried to access bootstrap recovery to delete the data I hadn't cleared. I was surprised to only be able to access the stock bootloader, 30.04. Anyway, I decided to try using an SBF to restore, but I used the wrong one. Bootloader now loads with these messages, "Err:A5,70,70,00,1F" "MEM_MAP Blank" "Service Req'd".
I got my hands on the system only SBF for 2.3.320 that is floating around, but that still isn't fixing my problem.
Simply put, does anybody know of anything I can do now?
Click to expand...
Click to collapse
Think you're boned. Shoulda read some of the thread at mydroid before taking this on. Most ppl are bricking, with it. You appear to fall into that category.
Go Back to TBH there maybe some help now.
But the 23.15 may also big the big bone.
ouch
This is awful. I'm a guide on another forum for androids and I'm telling people not to try the new update until there is a full sbf available. I'm so sorry. You are stuck..for now.
Well, Verizon's gonna let me swap, so I'll just have to wait until Tuesday and root the new phone.
I'm preparing to root my X and am trying to get a rescue plan in place prior to rooting. The one thing I can't find is a list of what SBF files can safely be used for a given bootloader revision. I posted this in a thread at another forum. Does what I'm asking for not make sense? Or am I completely missing something?
There should be some sort of sticky for SBF'ing the X. I realize that sbf links cannot be posted but it would sure be nice to know which files are needed to properly sbf a semi bricked phone, especially if using the wrong one will fully brick a phone.
What I've gleaned from this thread...
"No if you were stuck on the M that shows that you should already be updated, put your phone into flash mode and make sure (turn of your phone press the camera down volume and power button). It should say boot loader 30.04 if it shows 30.03 then dont use the link provided. If it is 30.04 go download the sbf from ncdubs link and run it using RSD 4.8 and that should be enough for the phone to get past the M logo. Dont it asap because you never know when that link will be dead. Man I was so scared yesterday because i thought my phone was bricked haha but that link that i found in another forum did the job."
"If you are on 2.3.20, use the 2.3.15 SBF.
If you are on 2.3.320, use the SBF's from TBH"
It would be nice to have a running list detailing which sbf file needs to be used for a given bootloader,
i.e. if bootloader is 30.03 use the 2.3.15 sbf or the x.x.xx sbf
if bootlader is 30.04 you can safely use the x.x.xx sbf
and so on.
Surely this won't be in violation of anyone's terms of service would it?
I'm not rooted yet but I'm trying to wade through multiple posts at multiple sites to put together a rescue package prior to rooting and can't find what I believe to be concise information anywhere.
Click to expand...
Click to collapse
http://www.mydroidworld.com/forums/...rikes-back-2-3-320-update-must-rooted-69.html
Post #682 - CZ from TBH is working on a way to restore soft bricked X's,and is making good headway!
bricked, verizon is overnighting one, should have a good clean one tomorrow.
SerialKilla said:
.....link deleted, as this forum won't allow me to post outside links..... yet...
Post #682 - CZ from TBH is working on a way to restore soft bricked X's,and is making good headway!
Click to expand...
Click to collapse
Thanks for the link, I'll be following the thread closely. Sorry to hear you're X is in a semi bricked state. At this point I'm quite wary of doing anything to the X but I believe I have a rescue in place. My phone shows to be 2.3.151 and I found VRZ_MB810_2.3.15_1FF_01.sbf so I believe I should be able to safely recover should I brick it. I rooted using Z4 and the bootstrap, then proceeded to freeze the bloat. I'll run like this until UD for the X comes out then depending on SBF requirement / availability will consider trying it out. UD2 is really sweet on the D1 and I've read it's even nicer on the X.
I must be in the minority because I kind of like blur. I did freeze all of the social networking stuff and installed gallery3d, I would continue to use the blur gallery if it synced with picasa.
edit: SerialKilla I see a new rescue sbf was released, did it work for you?
edthesped said:
Thanks for the link, I'll be following the thread closely. Sorry to hear you're X is in a semi bricked state. At this point I'm quite wary of doing anything to the X but I believe I have a rescue in place. My phone shows to be 2.3.151 and I found VRZ_MB810_2.3.15_1FF_01.sbf so I believe I should be able to safely recover should I brick it. I rooted using Z4 and the bootstrap, then proceeded to freeze the bloat. I'll run like this until UD for the X comes out then depending on SBF requirement / availability will consider trying it out. UD2 is really sweet on the D1 and I've read it's even nicer on the X.
I must be in the minority because I kind of like blur. I did freeze all of the social networking stuff and installed gallery3d, I would continue to use the blur gallery if it synced with picasa.
edit: SerialKilla I see a new rescue sbf was released, did it work for you?
Click to expand...
Click to collapse
I haven't seen the new .sbf yet...where did you see it? If it's just the sytem only fix, that won't work on mine - I need the full .sbf, or whatever it'll be that CZ and P3 are working on. P3 said to expect something in less than 36 hours, but I haven't seen anything as of yet. Too early yet I think - but I know they've had success in their progress, so fingers crossed!
SerialKilla said:
I haven't seen the new .sbf yet...where did you see it? If it's just the sytem only fix, that won't work on mine - I need the full .sbf, or whatever it'll be that CZ and P3 are working on. P3 said to expect something in less than 36 hours, but I haven't seen anything as of yet. Too early yet I think - but I know they've had success in their progress, so fingers crossed!
Click to expand...
Click to collapse
Sorry, it was the system only sbf, I d/l'ed it as a backup and judging by it's size it isn't a full system sbf. Hopefully you'll be rocking again by this time tomorrow.
Related
Hello, I just got a Motorola Milestone X. Its running on ACS alaska network. From reading I've done this phone appears to be the moto x but just not the vws branded phone? My question does anyone know of a way to root it and or any custom roms for it? Its filled with bloatware and no way to remove it and the stock rom is very ugly.
Ive tried z4root, superoot, androot and various other rooting guides that were supposed to work on the Moto X but all have failed me. Its running 2.2.1 and from what I gather this might be the problem?
Any help or info from anyone else familiar with this phone would be greatly appreciated as I hate it in its current stock form and would like to at least be able to remove the bloatware and crap I dont use even if there arent any custom roms for it. Thank you
Possible root
I also have a milestone x from a local carrier, and was able to root it.
I downloaded and installed all the Motorola drivers.
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
Hooked the phone up and went through each mode to ensure all the drivers were installed.
I then installed the latest version of SuperOneClick from http://forum.xda-developers.com/showthread.php?t=803682
I then extracted and ran SuperOneClick, chose the psneuter exploit and clicked root. This was able to root the phone. I did need to reboot the phone before the superuser application would work though.
I haven't looked into custom roms yet.
thank you very much for the information. I tried super one click but it would always lock up but maybe i'll give it another try. Is your phone running 2.2.1? Thanks again for the reply.
Inciner8Fire said:
I also have a milestone x from a local carrier, and was able to root it.
I downloaded and installed all the Motorola drivers.
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
Hooked the phone up and went through each mode to ensure all the drivers were installed.
I then installed the latest version of SuperOneClick from http://forum.xda-developers.com/showthread.php?t=803682
I then extracted and ran SuperOneClick, chose the psneuter exploit and clicked root. This was able to root the phone. I did need to reboot the phone before the superuser application would work though.
I haven't looked into custom roms yet.
Click to expand...
Click to collapse
I must have used a older version of SuperOneClick before. This one you linked worked with no problems at all. Thank you so much!
No prob, glad it worked for ya.
Thanks for the post. I was going through the same frustrations with my new ACS Milestone X. I see now that there is a new version of SuperOneClick ... anybody else trying to make this work, make sure you use v1.7.
So back to JDinAZ74's second question ... now that we've rooted are there custom roms for our CDMA version of this phone? I see tons of roms but none that I've noticed specify GSM or CDMA, which usually means it's GSM. Anybody know for sure?
the dx is on verizon, so its all cdma. i not sure it would matter though...
Yeah I'm not sure it matters either ... I know on my HTC Desire it mattered. If I flashed it with a GSM rom it would not boot.
Okay so somewhat unrelated ... i've got bootstrap installed and was able to do a rom backup via clockwork recovery. Is there a way to boot into recovery from the device being off? I tried every combination of buttons while pressing the on button but nothing works. I've looked all over the forum (and googled) but can't find anything.
I want to start installing custom roms but am affraid of something going wrong and me not being able to reflash my backup.
Then again maybe I'm just confused because I'm coming from a Desire which I've discovered Motorola and HTC modding differs significantly.
Im still looking for roms as well and kinda afraid to just start trying things like you said. If you come across anything that works let me know and ill do the same.
to get to stock recovery, hold power and home till the moto logo appears, then release the power button until you get an exclamation point, then let go and click the search button.
to get to cw recovery, do a battery pull and reboot.
if you completely **** your phone, sbf.
mattmartin77 said:
to get to stock recovery, hold power and home till the moto logo appears, then release the power button until you get an exclamation point, then let go and click the search button.
to get to cw recovery, do a battery pull and reboot.
if you completely **** your phone, sbf.
Click to expand...
Click to collapse
Wouldn't the SBf only work on a Droid x?
mattmartin77 said:
to get to stock recovery, hold power and home till the moto logo appears, then release the power button until you get an exclamation point, then let go and click the search button.
to get to cw recovery, do a battery pull and reboot.
if you completely **** your phone, sbf.
Click to expand...
Click to collapse
Fantastic! Thank you.
I don't know that they could do an sbf being on a non Verizon carrier. The sbf files out are all for Verizon. If you do screw up your phone you would have to take it into the store and have them sbf it. And they might not. I think you guys just need to be a little careful. Unless you can find an sbf file from your carrier. Try apex, rubix, or liberty roms for flashing. All the roms are cdma. Good luck and be careful.
Sent from my DROIDX using XDA App
The milestone x uses the same RSA key for its bootloader as the original Droid X. You CAN flash a Verizon SBF into it and it will work, HOWEVER, it will NO LONGER work with your carrier. It is also important to note that ANY SBF will overwrite the baseband AND the baseband configuration (unless specifically noted NOT to do so) rendering the phone useless, requiring re-programming, which for the voice part is no big deal, but to get EVDo working again you'll need to edit some non-user accessible parameters with QPST and what not to get it to connect back to the non verizon carrier.
What you CAN do with this phone is non-baseband patching updates/roms. If you've got a Milestone X you're not on verizon, so you're not able to use the leaked SBF's and what not, which removes a decent safety net. So flash with caution. If your carrier is small enough they are likely to re-sbf your phone for you if you brick it.
One last word of caution.. Verizon's DX on leaked GB's updates the BL to a newer version than is on the Milestone X. This will turn your phone into a Droid X, with no ability to go backwards until the same BL is available on the Milestone X.
In short, we non VZW DX owners have a lot less fun..
Bollocks to that.
really wish I knew if someone had tried, I really want to try that leaked gingerbread.
went ahead and took the plunge with... SUCCESS. I installed Liberty 2.0.1 and nothing went wrong, you just got to be more careful than others who have the sbf backup.
Went to ACS today because i'm considering this phone, ACS is partnering with Verison(GSM), and GCI is partnering with Sprint (CDMA).
Just incase it's not clear i'm sure roms for Verizon will work for ACS and roms for sprint should work with GCI.
Double check incase i have the two "bands mixed up" i know i have the carrier relationships right.
Does anyone know if we can overclock with out romming?
I tried droid overclock a few times which always sent the phone into a boot loop. Id have to pull the battery and do a factory reset to get it running again.
Okay so today i decide to root my phone. I heard alot about custom roms and other tweaks that make your phone do all this cool stuff. Well i try and download a custom rom, i did use the droid 2 bootstrap, and i believe i backed up on ROM Manager. after that i went and looked at roms and i downloaded Tanzanite ROM. at first i thought i was in a boot loop and i got scared because i rooted my phone last week and downloaded a custom rom wrong and it was in a boot loop. So when i thought this time it was in a boot loop, i hold X and Power button and get recovery options. i factory reset it then rebooted it, it then started up on Tanzanite ROM. I was quite happy with it, then when i try to look at my apps, they are all GONE ! There is no Market and i have no 3G coverage. I was upset and i dont know what to do. I am scared if i do something it will go into a bootloop or i will be stuck with this ROM forever. I NEED HELP ! PLEASE ! i cant afford another phone replacement. Please help me ! Please, experts, people who had this issue, somebody just please help. Thanks.
You're not stuck. There's always SBF.
SBF is your best friend. And a word of advice to you. ALWAYS find out what kind of recovery is out for your phone before you do ANYTHING like rooting or flashing. For Moto phones, SBF is your friend. HTC has RUU's.
Here is the guide to SBF your phone:
http://forum.xda-developers.com/showthread.php?t=770224
(Be sure to get the RSDlite 4.9 and the latest Moto drivers which you can find on Moto's website)
Here is the SBF file to download:
h t t p://www.mydroidworld.com/forums/droid-2-discussion/5323-tbh-mydroidworld-present-droid-2-2-3-20-triple-threat.html
This will get you back to 100% out of the box stock.
Good luck and let us know if you get it fixed. If you have any problems or questions, feel free to PM me.
I fixed the problem. Thanks guys but i would like to know, what is SBF and what does it do? Everytime i do a new ROM i am scared of the outcome. It bootlooped once and got a new one. I will always be scared when my phone re-boots. Alot of feedback i got, has mentioned SBF and i have yet to know what it does and yet to know what it means.
I could be wrong, but I think SBF stands for System Backup File. It basically is a file that came from Motorola. Motorola uses it to get the phone back to its out of the box state, meaning it returns the phone to the same state as when you got it.
You use it if you have no way to fix your phone. As long as you can get into bootloader mode, you should be able to use the SBF. It's actually pretty hard to 100% brick these phones.
Most phone has some sort of recovery utility like this. For example, HTC has RUU (ROM Update Utility) which will do the same thing as an SBF for Moto phones. I don't actually know what other brand phones have, because I've only ever rooted HTC and Moto phones.
Also, when you flash a ROM, you say you bootloop right? Be sure before you flash a new ROM to wipe data and cache in clockwork recovery. This should prevent bootloops.
Hey guys I'm new to the site and have some knowledge regarding Android and a little about the rooting process however I am still not officially rooted.
I just brought a Motorola Droid Pro off eBay and it came with Clockwork mod Recovery I really want to get rid of it because every time I re-boot the phone it pops up. I think that means that my pro is rooted and I have used it to wipe the phone and wipe the cache hoping to also get rid of the recovery however it is still there. Is there a way to get rid of it and go back to actual stock android with the new pro update that was released a couple months ago? Thanks so much I don't really know where else to go with these questions and hoping to illicit some kind of response from this site. Thanks so much.
Sorin712 said:
Hey guys I'm new to the site and have some knowledge regarding Android and a little about the rooting process however I am still not officially rooted.
I just brought a Motorola Droid Pro off eBay and it came with Clockwork mod Recovery I really want to get rid of it because every time I re-boot the phone it pops up. I think that means that my pro is rooted and I have used it to wipe the phone and wipe the cache hoping to also get rid of the recovery however it is still there. Is there a way to get rid of it and go back to actual stock android with the new pro update that was released a couple months ago? Thanks so much I don't really know where else to go with these questions and hoping to illicit some kind of response from this site. Thanks so much.
Click to expand...
Click to collapse
1. Locate the thread with the SBF files "bricked your droid pro, SBF files" or something like that.
2. Download the SBF file for the droid pro. MAKE SURE ITS THE DROID PRO SBF.
3. Aquire RSD lite, it may be in that thread as well, otherwise find it on the internet
4. Using RSD lite, write the SBF file to the phone.
That'll set it back to factory spec, including unroot and bootloader... it'll be a few software updates back, so just manually set it to look for updates.
Thanksfor the quick reply I saw something like this somewhere while googling... I'm assuming RSD lit is pretty easy to navigate then I'm just using it to write the SBF file (I'm assuming SBF is like original factory update file) onto the SD card? Will doing this also rid of Clockwork mod recovery? Thanks again dude.
Sorin712 said:
Thanksfor the quick reply I saw something like this somewhere while googling... I'm assuming RSD lit is pretty easy to navigate then I'm just using it to write the SBF file (I'm assuming SBF is like original factory update file) onto the SD card? Will doing this also rid of Clockwork mod recovery? Thanks again dude.
Click to expand...
Click to collapse
SBF is basically a image of the phone's software. Someone pulls it off a factory fresh phone and distributes it (or, it gets pirated direct from the source)
You're not writing it to the card, you're writing it to the phone.
When you open RSD Lite, you should see the phone connected. Also, theres a button that says "..." Click that button, choose the sbf file, and hit start... wait for it to finish, then after it resets the phone and says "please manually restart the phone" you can unplug and end the program.
This will reset the phone to just like it came off the factory floor. Stock recovery, OS, bootloader, etc.
Thanks dude figured it out yesterday was a little scared but did it thanks so much again.
A month go I installed the leaked Gingerbread. everything has been fine until I decided to get back to Froyo for the OTA. Rooted this morning through Gingerbreak. Still OK. Made a back up through Bootstrapper. Booted into recovery and installed .zip from sd card. Used Maderstock zip. it made it through almost the entire process then when it got to update Radio it aborted. I cleared all the cache and data and all...still nothing. Hit reboot and now it is stuck in bootloop at the droid logo. The font with the circles under the "r" Can not hold home and power to get into recovery. can not turn on phone at all. only get charge screen when plugged in (and yes I was 90-100% charged when attempting this) and red moto logo goes black when attempting recovery boot.
I assume I need to SBF through RSD Lite. Problem is- It wont recognize my device. (yes I have downloaded the Moto drivers.)
At this point I am totally stumped. Noob here, but with LOTS of research and reading over the last weeks.
Help?
check out how to sbf using a linux virtual machine. You can just boot it up within windows. As far as I know, you will not need the drivers for this to work.
Try this. Hopefully it helps.
http://www.droidxforums.com/forum/d...-solution-your-windows-rsd-lite-problems.html
After weeks of reading forums and posts, I have successfully SBFd my phone back to stock Froyo. I wish I could remember everyones names from every post I read, and thank them personally, but a BIG THANK YOU to the Android community and to anyone that has offered their time and service to helping out. THANK YOU ALL! My experience as little as it might be might now be valuable to others as well.
Let us know what you did fix your situation.
Sent from my DROIDX using XDA App
Fixing a bricked Droid X
beeper10 said:
Let us know what you did fix your situation.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Many thanks to all those that have spent countless hours helping users like myself find solutions to Droid X problems. At one point in this process I basically bricked (maybe soft briked is the term) my phone. I could do nothing but get a bootload screen. No moto logo, no droid eye, NOTHING.
Long story short, and to help anyone that needs it, here is my solution.
Download FULL SBF file from file share somewhere (VRZ_MB810_2.3.34_1FF_01.sbf)
Download RSD Lite 4.8
Download Moto Drivers
Power Off Droid X- Make sure it is fully charged when attempting any SBF Flashing.
Power on into Bootload mode. I held Power and Volume rocker simultaneously until a quick flash then Bootload appeared. (version 30.4)
Open RSD Lite as an administrator. (hold shift and right click. use "run as") In my case Windows 7 -64bit
Plug phone into computer via USB
Locate device in RSD. Click the little box that has "..." in it and select the SBF file you previously downloaded.
Start.
Let it work its entire process and Voila you will have stock Froyo back on your phone in no time.
I then went in under settings and received the OTA for Gingerbread. My phone works like a champ now.
The steps are clear as day in my head, and I will be able to troubleshoot many of you through the steps. The further from today it gets it might get foggier, so ask away if you are having problems.
It seems like everything had to be VERY specific to work just right.
Good luck and happy Bricking! :/
It happened to more people than you think. I DLed RSD 4.9, 4.8 didnt work for some reason. That was like a month ago, I'm on froyo now, rooted with Liberty. Now I have to SBF again to get the official GB...lol!
My story the same just different thread, (soft bricked) lol my phone, all i got was the bootloader, on win7 64bit as well, only thing different was ive my win7 tuned up to my preferences so i didnt have to ask or run as anything. The steps used in this thread were identical however and many many hours of reading done as well. Just putting this info up here to let you know that you can get your dead bootloading phone back so even though it feels like you have a bowl of something nasty in your stomach as you stare at your DX with nothing but a bootload screen on it and seemingly no other options, read thoroughly, pay attention, be specific and youll have your DX running like a champ in no time. THANK YOU Devs/Community
Night before last my Droid X was upgraded via OTA from Froyo 2.2.1 to Gingerbread 2.3.4 , at which I lost my Root. So I started searching YouTube for videos on taking my phone back to Froyo. And I found just what I was looking for. Return your Droid back to Froyo. So I followed the instructions to the letter, I downloaded - RDS Lite 4.9 - Motorola Helper_2.1.40_5.5.0 - VRZ_M810_2.3.34_IFF_01 . According to RSD Lite the flash was successful. Droid X reboots, and this is what I was left with.
Bootloader
30.04
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program'Transfer Mode:
USB
I have tried SBFing twice and RSD Lite sees the phone, goes thru the flash, reboots the phone but I get the same responce on the phone as stated above. Although in my computer, the Droid is not detected.
In your opinions, have I done an unrecoverable bricking to my Droid?
Go ahead, I can take it.
TIA
I used 4.5.621 SBF file, and was able to bring my phone back to the way it was before I got in a bind (Droid X SBF Files - Motorola SBF Files). It is alive with all of my Apps, so I'm not sure just what happened to it. But to whoever is responsible for the web site, I think P3 Thanks
Great job on getting back to .621.
Unfortunately, being on .621 makes it impossible to flash back to Froyo.
However, you can root and install custom roms.
Sent from my DROIDX using Tapatalk 2
yeah I know, but at this point I'm just happy to have my phone back in good working order. I had just bricked my Droid X2 @ 2 weeks ago, so now I don't have to face my wife with another $200.00 paper weight.
I have the same issue. Someone pointed me to this forum so I'll just include my text.
So I just got my first droid yesterday, it's a droidx from motorola. I initially factory reset it and cache cleared and it was working like a charm. Anyways, today I got the idea after reading over cyanogenmod following these instructions. Since I didn't have much on it I didn't backup. I remember vaguely updating the system previous to this, I think I was at 2.34. Anyways, I get done with flashing it- as far as I know it was successful- rdslite said it was complete. I try to do another factory reset, can't get into it. Just the bootloader comes up saying : Bootloader30.04 Err:A5,70,70,00,1F and a few things about to plug usb in and that it needs service...
I see something on cyanogen's page that I overlooked before:
WARNING: The 2.3.4 OTA release, the bootloader was patched to version 30.04. If an attempt is made to downgrade to an earlier version through the SBF method below, the bootloader will throw an error and the phone will not boot.
FLICK.
I tried the 1kds cd and it says it installed properly, I turn it on only to see same bootloader issue. I tried another rom and same thing. The last one I used was apparantly a 2.34 one and now my phone says code corrupt on the bootloader screen.
I need to find a way to charge the battery. I feel bad because it was a present to me from my girlfriends sister, and I don't want to see her and tell her I broke it already
But, can you guys help me with this? I don't really know where to go from here.
Sbf
Sbf is the only way. And from what I understand if you did the. 621, you won't be able to do previous releases.
I could be wrong.
When it comes yo moto flashing, donkey skip reading anything lol
Sent from my DROIDX using xda premium