Couldn't find answer to my issue but if i overlooked please forward the link
anyway, my screen does not time out any more. it was set for 30 seconds, at one point i enabled the stay awake feature that keeps it awake while charging. but I have since disabled that feature. in any case, it should be irrelevant because my phone won't timeout even when not charging. disappointing because it used to work no problem . any suggestions?
Please post questions in Q&A section.
Whosdaman said:
Please post questions in Q&A section.
Click to expand...
Click to collapse
I too have noticed my screen is not timing out and going to lock state. I have timeout set to 2 minutes. The timeout time is now only dimming the display, but it never seems to go to lockscreen state. Has anyone else seen this and know how to correct it? I'm running Ice Glacier 1.1.1 themed, and can post in the devel section of that thread if more appropriate.
Sorry for the double post ... I rebooted and now screen timeout is working again. I'll keep an eye on it to see if the problem returns after a certain amount of bootup time.
Related
There was another post over this topic on Q&A but his was never answered so I'm posting here.
I recently reset my EVO and now when it is plugged in after 2 minutes (which is what it's set for) the backlight goes completely off. Now before I reset my EVO it would dim after two minutes and then stay on while it was charging. It would of course dim completely after two minutes if not on a charger. For some weird reason I can't seem to find how to duplicate this setting again. It dims completely off after two minutes whether it's being charged or not. Anybody know how to make this work or was this changed in the last update and that's why I can't find it? Anybody??
Have you tried looking under settings-applications-development? There is a setting that says to keep the screen awake while charging. That might be it if I read your post correctly. Then again maybe not
Sent via the Sprint HTC EVO
trentlythp said:
Have you tried looking under settings-applications-development? There is a setting that says to keep the screen awake while charging. That might be it if I read your post correctly. Then again maybe not
Sent via the Sprint HTC EVO
Click to expand...
Click to collapse
That was it. It just eluded me to no end. Thanks bro.
Thanks for me as well. It sucks that such settings are buried so deep.
AcIdC0R3 said:
That was it. It just eluded me to no end. Thanks bro.
Click to expand...
Click to collapse
Anytime. Just doing my part
Hmm. This doesn't work for me. Screen keeps sleeping even with this option selected. Sometimes the backlight stays on even though the screen and goes completely blank. Most of the time, the brightness fades until it is unusable. Anyone else have this problem? (Using stock ROM - it came with Froyo out of the box).
I am beginning to think this only annoys me..lol but I really wish I could set the screen time-out to "Never" so it doesn't power down after 5 minutes.
I originally posted this issue in WP7 General as I wasn't sure if it was an OS issue or related to a specific handset.
http://forum.xda-developers.com/showthread.php?t=882392
I have since learned some WP7 phones can be set not to timeout... great for navigation, music etc.
In the other thread someone did find a way in the diagnostic settings to keep the screen on but couldnt recall how he did it. I am hoping someone here may some ideas.
Thanks
I got my 32GB AT&T Galaxy s4 one week ago today. Had to make an 8 hour road trip to get one but I would say it was very much worth it. I am having this maddening problem where a couple times a day the Display screen timeout keeps re-setting itself to (2 seconds) Unbelievably frustrating considering I can barely get the screen unlocked in 2 seconds and if I blink I have to do it all over again.
But wait, don't walk away just yet, there's more! I have already factory reset 3 stinking times trying to get to the bottom of this and when I woke up this morning it was back to (2 second). Furthermore it shows (2 seconds) in brackets like that so I assumed this was the default value but after checking just now while I was typing this post I noticed after changing it back to my preferred 30 seconds that the 2 second option vanishes. I'll snap a screenshot next time this happens.
Anybody else seen or heard of this problem? I assumed everybodys was doing this until I started searching and found 0 others with the problem. Is my phone The Chosen One?
Yes, i have it also and i found some forums where they discuss same problem, but no solution . Let's think what we have in common..
I have this app called Light Flow, do you?
Also which things you have on?
I have nfc, snart view, smart scroll, air view, air gesture
whatever61 said:
Yes, i have it also and i found some forums where they discuss same problem, but no solution . Let's think what we have in common..
I have this app called Light Flow, do you?
Also which things you have on?
I have nfc, snart view, smart scroll, air view, air gesture
Click to expand...
Click to collapse
Absolutely have Light Flow. I never leave home without it.
NFC. Yes
Smart View. No
Smart Scroll. No
Air View. Yes
Air Gesture. Yes.
I thought for sure it must be Smart Stay malfunctioning but I don't even use that.
maybe it has something to do with Light Flow?? this app caused weird bugs sometimes...
wanna try to turn it off for a while and let me know if it helps?
whatever61 said:
maybe it has something to do with Light Flow?? this app caused weird bugs sometimes...
wanna try to turn it off for a while and let me know if it helps?
Click to expand...
Click to collapse
Worth a shot. I'll play with it and see. Thanks for the idea!
I'm having the same issue and I also use Light Flow - any developments?
Work around
Guys, Did yo get this sorted? I had exactly the same problem which has been driving me mad but managed to sort a workaround which works perfectly. Let me know if this wasn't sorted and I'll post it.
I turned off "Power Saving" mode and it hasn't done it since.
EDIT: Nevermind... just had to give it more time.
Islandguci said:
Guys, Did yo get this sorted? I had exactly the same problem which has been driving me mad but managed to sort a workaround which works perfectly. Let me know if this wasn't sorted and I'll post it.
Click to expand...
Click to collapse
Would you kindly post the workaround? I'm out of ideas at this point.
You all have LightFlow. LightFlow causes other odd issues with Accessibility settings with the S4. Get rid of it and for now use Light Manager. Its much better IMO because it doesn't need to be activated in Accessibility settings, it just works.
Well, I didn't have power saving on and was still getting the problem. I uninstalled light flow and still had the problem. To resolve this for now I use an app called tasker, I had it already because it is a very cool app anyway but once installed if you don't have it just create a rule to deal with the time out issue. My rule for example went like this.
If the time is between 00.01 and 23.59 then set display timeout to 2 minutes. This fixed the problem for me.
In fact you could create other rules to do the same but this does it nicely.
Sent from my GT-I9505 using xda app-developers app
Islandguci said:
Well, I didn't have power saving on and was still getting the problem. I uninstalled light flow and still had the problem. To resolve this for now I use an app called tasker, I had it already because it is a very cool app anyway but once installed if you don't have it just create a rule to deal with the time out issue. My rule for example went like this.
If the time is between 00.01 and 23.59 then set display timeout to 2 minutes. This fixed the problem for me.
In fact you could create other rules to do the same but this does it nicely.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I set my rule to set the display timeout every time the display is turned on. I couldn't make it work the way you did it. I think I need more expertise.
Thanks again.
I haven't seen this issue again since starting this thread. Go figure. I haven't changed anything at all either. Still using lightflow in its entirety just like I was before and never changed anything else that I can recall. Weird.
Ok, I think I have this issue figured out. Here's how I resolved it:
1. Open Light Flow
2. Open Settings
3. Scroll all the way down to the section "Additional LEDs found"
4. Deselect "lcd-backlight control' and exit
I have the same exact problem.. Tried everything but with no luck!! Any one figured it out!??
OutCell said:
I have the same exact problem.. Tried everything but with no luck!! Any one figured it out!??
Click to expand...
Click to collapse
Just to let you guys know, i was able to fix this problem but with a sacrifice.. I reset my phone to factory settings & reinstalled all apps except for Light Flow (The problem did arise after i installed it) and now the screen times out perfectly with the duration i set. :good:
I just hope Light Flow fix this issue soon because i got used to the LED lights indications,, they were very useful.
Solution (I hope)
It's light flow's turn on screen option. They're patching it in the next update, but for now all you have to do is uncheck switch screen on in the notifications.
I tried this tonight. Will post back confirmation from the link
I just registered so I can't post the link to the forum I found it on.
Screen timeout
So I have a Galaxy s4 and started having this same issue with my phone. I would set the timeout for 3 minutes but it would reset back to 0 after so long. I dont have that application you all are talking about. I did root my phone which I do not think matters.
Essentially there are 2 spots to change the screen timeout I found.
My device>Display>Screen timeout
and
My device>Accessibility>Screen timeout (which was set to 0 even though the other was set)
I will let you know if this resolves the screen timeout issue for me.
Thanks
-Jon
goonies83 said:
So I have a Galaxy s4 and started having this same issue with my phone. I would set the timeout for 3 minutes but it would reset back to 0 after so long. I dont have that application you all are talking about. I did root my phone which I do not think matters.
Essentially there are 2 spots to change the screen timeout I found.
My device>Display>Screen timeout
and
My device>Accessibility>Screen timeout (which was set to 0 even though the other was set)
I will let you know if this resolves the screen timeout issue for me.
Thanks
-Jon
Click to expand...
Click to collapse
Disregard....still having the issue.
mharmon said:
I'm having the same issue and I also use Light Flow - any developments?
Click to expand...
Click to collapse
I also was having the same 2 second screen problem and found the unchecking the (turn on screen) to (Switch the screen on for 5 seconds when the notification arrives) in each of the notifications in Light flow has solved my problem. It seems that it was the cause of resetting the screen time out to 2 seconds.
Can someone else try this and confirm that this is the cause???
The issue is when i turn the screen off, lets say the time is 2:00PM and i check for notification at 2:20PM. What happens is as soon as the screen turns on the time jumps from 2:00 -> 2:20 PM , shouldn't this be done as a background process so that we shouldn't even see the time jump?
Anyone else facing this issue and any workarounds/fixes?
Thanks
Xxxdevilxxx said:
The issue is when i turn the screen off, lets say the time is 2:00PM and i check for notification at 2:20PM. What happens is as soon as the screen turns on the time jumps from 2:00 -> 2:20 PM , shouldn't this be done as a background process so that we shouldn't even see the time jump?
Anyone else facing this issue and any workarounds/fixes?
Thanks
Click to expand...
Click to collapse
Hi,
Does it always jump to the correct time?
I have seen this on different ROMS on other phones.
Xxxdevilxxx said:
The issue is when i turn the screen off, lets say the time is 2:00PM and i check for notification at 2:20PM. What happens is as soon as the screen turns on the time jumps from 2:00 -> 2:20 PM , shouldn't this be done as a background process so that we shouldn't even see the time jump?
Anyone else facing this issue and any workarounds/fixes?
Thanks
Click to expand...
Click to collapse
Pretty old. Used to happen on my S2 too.
i guess it is an intent that gets activated upon waking of the phone (by turning on the screen)... when you do that, it updates the screen and thats why.
but then again... that is only what i think.. if it should update it while the screen is turned off it would be an active process and use battery
Does it on mine too but only the clock on the main lock screen, the time on the top bar seems to be correct.
Sent from my iPad using Tapatalk (how ironic is that eh)
malybru said:
Hi,
Does it always jump to the correct time?
I have seen this on different ROMS on other phones.
Click to expand...
Click to collapse
Yes it always jump to the correct & exact time....it seems like a battery saving feature...if it is, other people with S4 should also experience it,no?
Tomo1971 said:
Does it on mine too but only the clock on the main lock screen, the time on the top bar seems to be correct.
Sent from my iPad using Tapatalk (how ironic is that eh)
Click to expand...
Click to collapse
For me i have a pattern Lock with time...so the moment i turn it on this is done on the lock screen clock...and yes the timer on the top bar seems to be correct(as in no jump).
Xxxdevilxxx said:
For me i have a pattern Lock with time...so the moment i turn it on this is done on the lock screen clock...and yes the timer on the top bar seems to be correct(as in no jump).
Click to expand...
Click to collapse
Hi,
I ,too, have the pattern lock screen.
But I have the Lightning Launcher.
So, there is no lag or delay on mine.
Maybe ,try a different launcher and see.
malybru said:
Hi,
I ,too, have the pattern lock screen.
But I have the Lightning Launcher.
So, there is no lag or delay on mine.
Maybe ,try a different launcher and see.
Click to expand...
Click to collapse
oh...will do
New to XDA. Hello all!
I am experiencing this clock lag as well. :/
It doesn't matter if I use a custom lock screen or the Samsung lock screen with "swipe to unlock".
It's easily reproducible, let phone sit for 10-15 min and if you press the unlock button you'll see the wrong time for anywhere from a fraction of a second to a few seconds! and then it will update to correct time. Super annoying if I just want to know the time. Also, I've found that the amount the clock is behind is proportionate to the amount of time the phone as been idle....to a point...
I've seen the clock be over an hour off but it doesn't drift much more than than. Like a few folks mentioned, this should be running in the back ground. What is confusing to me is the clock in the top right is correct, so the phone is monitoring the clock...it's just not updating the lock screen clock.
Hopefully we can find a work around.
Not too keen on a new launcher...at least not until others who have seen that lag switch over and confirm it as a fix...but I don't think it will help, because the lock screen is still a Samsung process not controller by the launcher (i don't think)
Any thoughts?
The clock on the main unlock screen is essentially a widget. As a power saving feature, it only updates as necessary, which would be when you turn your phone on to look at the time. The time at the top of the screen in the notification bar is not a widget, it is a built in process that is always active. That is why it is current and the large clock, "the widget", is off until you turn your phone on to look at it.
My phone does the same thing. As does pretty much everyone's. It is not anything wrong with your phone, it is just the way it is set up. It is usually only delayed by a second or two, at best.
If it is an issue, you can always just remove the widget and use the time at the top of the screen to check. Or try a different app and set the update frequency.
It's not that big of a deal to me, I know it's always off until it refreshes, so I just give it a second to update.
As the title states, I can't keep my phone from going to sleep. I've set the display settings to keep it on for 5 minutes and I even tried it with 2 minutes. If I lay it on a table and say, read a forum post, it'll just turn off. Has anyone else had this issue or know how to fix/change it?
jonny727272 said:
As the title states, I can't keep my phone from going to sleep. I've set the display settings to keep it on for 5 minutes and I even tried it with 2 minutes. If I lay it on a table and say, read a forum post, it'll just turn off. Has anyone else had this issue or know how to fix/change it?
Click to expand...
Click to collapse
Try turning off moto display or any other automatic locker/unlocker if any