Database Users

Flashed 32B on 32A HTC Magic

So I have bought a HTC Magic in Singapore about a year ago.
Some of the information about my phone before it got stucked in HTC Magic power-on screen:
SAPPHIRE PVT 32A SHIP S-ON A
HBOOT-1.33.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009,19:43:30
I found a site that helped me to get my phone rooted as follow:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Aug 21 2009,18:19:15
Soon after, I started searching for new ROM elsewhere and managed to update my SPL to 1.33.2007 and that's where problem starts to occur..
My phone get stucked on HTC Magic screen display forever.
I was eager to get this problem solved and have not done enough research before I got myself in a worse situation with the phone hbooted like this:
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPLD-12
RADIO-2.22.19.26I
May 27 2009,19:06:41
Now I can only enter hboot and fastboot.
Can somebody help me to at least get back to my original ROM? I don't wanna root my phone ever again..
Help please~

If you can get into fastboot you're fine. Just flash 32A radio/spl again and then the desired ROM. Old radio/spl - 1.33.X/3.22.X New radio/spl 1.76.X/6.35.

yeah when turning on the phone hold home and power, if you get the recovery menu then you got nothing to worry about, just flash the proper rom and all will be fine, there is even a stock htc rom with root around here.
right here http://forum.xda-developers.com/showthread.php?t=622038
but you dont have to go back to stock, you just need to put on a rom that fits your phone. i personally suggest this http://forum.xda-developers.com/showthread.php?t=654284
so good luck post back when you get it figured out

Thank you Reziukas and sike89 for the reply..
I will try the ROM recommended in the links. =)
I cannot get into recovery (-Home- & -Power-) now due to the perfected SPL (1.33.0006).
And whenever I use the goldcard method that flooded over the internet, I always get this "Main version is older!" failure message.
I think I have made the goldcard correctly cause it worked while I was trying to flash my 1.76.0007 SPL to 1.76.2007.
Any idea?

when you hold home and power what does it do?
did you root your phone with the recovery-RA-hero-v1.6.2.img?

I did but after I flashed RADIO-2.22.19.26I with SPL 1.33.0006 I can't get into this recovery mode anymore.
When I press Home and Power, it starts booting but stucked on HTC Magic screen forever..
Easily said it, I can only enter hboot (vol down and power) and fastboot (back and power) now..

Procedure
1.Turn your phone off. Turn it on by holding Back and Power, or Vol. down and Power. Either way, boot into the bootloader.
You should see the three Androids on skateboards, and the menu title should say "Fastboot".
2.Connect your device to the computer. The display on your phone should now say "Fastboot USB".
3.Open up the shell/terminal on your computer, and type
fastboot devices [enter]Your device should be listed with it's serial number, and should say "fastboot".
4.Change directory to where you have saved your recovery image. I.e. type "cd /path/to/recovery.img in windows prompt, press enter.
5.You may issue a "dir" command (Windows) or "ls" (Unix/Linux) to make sure you are at the right directory, or just skip this step.
6.Type
fastboot flash recovery recovery.img
Check your phone's display, as recovery is being sent and flashed to your device.
Check your command prompt/shell to make sure the process is over.
i got all that from Binary100100 who got it from here http://wiki.cyanogenmod.com/index.php/RE-recovery-img
give that a shot
also maybe this might help
http://forum.xda-developers.com/showpost.php?p=4066552&postcount=2

I seem like I cannot use the fastboot command in 1.33.0006 SPL??
Whenever I type a fastboot command and press enter, I always get an error message.
>> ... FAILED (remote: not allow)
Do we have any windows application that can help to bypass all checking on the phone stats and proceeds with fastboot flash directly?

Perfected spl, you need to make yourself a goldcard

Goldcard doesn't seem to work..
Whenever I try to flash a new radio, it prompted me an error message "Main version is older!"..
What to do?

when it says main version is older it means you need the goldcard.
do you have a working goldcard? if not use this
http://revskills.de/downloads/psas.zip it will make the gold card.

No need for phone?
Hello there.
I was reading this thread and I'm having a similar problem.
I have a question, sike89.
Is it possible to create the goldcard just with the software you mentioned?
My magic 32a will only go into fastboot (stuck at splash screen) and so
I won't be able to use my phone to create the card.
Thanks!

As mentioned by YamatoDelgato, I cannot boot up my phone and thus far I am unable to re-create a goldcard.
But this "goldcard" I am using right now was a working goldcard and I am surprised that it doesn't work all the times..
By the way, I found an alternative on internet saying that you can use other HTC Magic phone to create a goldcard for your phone; Although I am not sure if its gonna work out, just give it a shot..

Sike89, am I right to say that this application does not require any HTC phone in order to create a goldcard?
I can just format my SD card using PC and input the necessary information into the application to create goldcard, is it true?

Problem Solved...with a Sacrifice.
Well I managed to get my phone booting again.
I have a rogers phone so I used their "mandatory"
update (2 sappimgs) to get my phone working again.
However, this resulted in getting the dreaded
SPL 1.76.0010 meaning I can't root it easily.
However, I know that with a working
phone that I now have, I could use it to obtain
a gold card.
Boy that was scary!
I'm so scared to try rooting again but I probably will hehe !
Thanks to xda community and google search!

I lost my original nandroid backup but did manage to install an original ROM on my 32B (Vodafone). Took some work but it worked Afterwards I wrote a tutorial about it (google How to restore your custom ROMed HTC Magic (Vodafone 32B) – a walk through, I can't post links yet).

Magic stuck on "htc magic" boot screen after Engineering SPL... and bad Nandroid, ugh

Magic stuck on "htc magic" boot screen after Engineering SPL... and bad Nandroid, ugh
Please help, I'm stuck on a boot screen, compounded by an apparently bad Nandroid backup
I just got a Rogers Magic so I can get 3G on AT&T. (couldn't with my T-mo G1) Rooted it, installed the RA-Sapphire recovery and took two Nandroid backups (one with, one without Ext)
Here was my starting point:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.0010 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
Plan was to install Cyanogen 6.1.0 (like my G1). This requires that I downgrade the radio, and I was planning on using RadioSwitcher tool to make life simpler.
The tool requires an engineering SPL be installed, and points to this Magic SPL Hboot collection thread
I've downloaded and/or tried (in this order):
Stock: 1.76.0010 (as noted above)
Engineering SPL 1.33.2010 (from the SPL collection thread the tool instructions pointed to)
1.76.2007 SPL (from the Cyanogen Wiki on Magic 32A with 6.35 radio)
Engineering SPL 1.33.2009 (from the SPL collection thread the tool instructions are pointed to)
So when I tried using the tool to switch the radio to a Radio_HTC_PVT_32A_3.22.20.17 [supplied], I got these results:
Stock 1.76.0010 - tool won't update radio without an engineering SPL. Device boots up no problem.
Engineering 1.33.2010 - tool uses Fastboot, I see progress bar, then screen goes black and tool reports "Radio update: FAILURE". Device now won't boot, hangs on "htc magic" boot screen.
Tried to restore - Nandroid restore issue noted below.
Engineering 1.76.2007 - same progress bar/black screen, update "FAILURE", and device won't boot.
Engineering 1.33.2009 - same progress bar/black screen, update "FAILURE", and device won't boot.
(I tried posting on that Radioswitcher thread but it's locked or closed or I'm just not able to post on it.)
I don't feel comfortable randomly trying SPL's, especially as I'm guessing there's simply a lack of understanding on my part as to which SPL is compatible with my current phone/radio. I'm hoping someone here can help with that.
Currently, this is how the phone sits:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.33.2009 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
...not able to boot, not able to restore:
I can get into recovery, but it's also testing me:
When I try to flash anything from SD, I get "E: can't mount SDCARD:" If I select "USB-MS Toggle" then disable it and come back, then it appears to work - but doesn't give me warm and fuzzies.
Nandroid restore - either backup gives "Error: run 'nandroid-mobile.sh restore' via adb!"
That really makes me uncomfortable and puts me a bit out of my comfort zone - I was counting on the Nandroid backup as my safety net... never had any issues with my G1 and Clockworkmod recovery. :huh:
Thankfully, I have the trusty G1 I can plug my SIM card into to use as a phone...
But I really need to get this working or it's a lot of money, and hopes, down the drain.
Help - please!

I used this guide to root my phone to begin with - I see there's an engineering SPL option in there also.
Although I said I wasn't going to try pot-shot SPL attempts, this was part of the rooting process I followed originally, and someone suggested that I try that one.
I can't boot my phone so I couldn't follow that process exactly, but I extracted the SPL file from that zip file and put it on the SD card using my PC, then booted into recovery to flash that Eng SPL...
...and still the Magic won't boot up. I can't tell if this is even any different than the previous SPL - or rather if the problem preventing boot is a problem, if it's tied to the SPL (numerous SPL-swaps would seem to indicate no?) and if it's different.
Now I'm here:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.2007 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18

Stop...you have an eng spl... Thats all what you need!
You are working the BLIND...
For every spl there are matching radios...
For the 1.76.2007 spl, you can use any 6.35 radio for magic.
For the 1.33.20xx(xx can be 04,05,10) you can use 3.22 radios.
All the above are eng spl, which basically gives extends read/write permissions.
With the eng you can flash what ever partition you want, e.g. system, radio or recovery.
The reason you can't boot is that you have **** up your system.... That we can fix easy :0)
Radio/spl **** ups -> not to so easy to fix.
You have a good combo now, let's get you a good system.
First, you need to flash a different recovery to make sure it works with the 6.35 radio.
Download my fastboot commander tool (magic version, check my signature) and it will do it for you the easy way.
When you have the tool, go to magic 32A tab.
There you can find two buttons, one for 6.35 radio combo a.k.a new radio.
You also find one for 3.22 radio a.k.a. old radio.
The tool will flash an entire combo of radio, spl and recovery that matches :0)
so... this what you have to do, choose 1 and only 1:
1) use the tool to flash "new" combo, reboot into recovery and flash any rom that is for the new radio (6.35). Check out the development sections for roms.
2) use the tool to flash "old" combo, reboot into recovery and flash any rom that is for the old radio (3.22). E.g. cyanogenmod from this page:
http://wiki.cyanogenmod.com/index.php?title=Latest_version#MagicCM6
Remember to flash the EBI 1 kernel or else the system will not boot.
The gapps (at the buttom of the page) are optional but recommend :0)
Good luck, and stop working the BLIND!

Sounds good...
Should I expect that after flashing the "old" images, that I'd be able to boot my phone into the stock OS again (1.5 with Sense)?
Or should I just skip that [if that's not a good test] and just proceed with loading the Cyanogen ROM?
Very much appreciated, and thanks again.
Also, one thing I'm concerned with - I've seen some notes along the way that the Magic requires a custom Kernel to install Cyanogen... I'm not sure what the Kernel really even is. Do you have any insight into that?
http://wiki.cyanogenmod.com/index.php?title=How_to_build_a_kernel_port_for_CM6
I've got the 32A - but those instructions are hardly 'download this file and flash':
"If you want to build a EBI1 kernel port package to get it to run on a 32A Magic (with 288 MB total RAM), or a phone with the 3.xxx radio such as the Rogers 32A Magic and Rogers Dream, then you can follow the instructions below:"
...and those instructions are long, and most intimidatingly - vague (much is implied, not all explicitly stated).
Yikes...

..........

I flashed the "old", and the phone now gets stuck in a boot loop on the "Rogers" (before the "HTC Magic" where it was getting stuck before).
The recovery is still the RA-sapphire-v1.7.OH... is that the Amon Ra?
I'll take a backup in this state, test-restore it (I know from experience with my G1 that the "HTC Magic" splash screen will be replaced with a Cyanogenmod one, with the Cyano 6.1.0) then put the Cyanogen on there and cross my fingers that I don't need to mess with that Kernel procedure...
EDIT:
I have a backup that restores - unfortunately it puts me back to the original "can't boot" state, lol.
Anyway, so after I took that backup, I proceeded to flash Cyano and the tiny Gapps.
I'm still getting hung on the Rogers screen - the Cyanogenmod boot screen doesn't come up.
WTF, you know?
EDIT 2:
I forgot to list my current state:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP50000)
CPLD-12
RADIO-3.22.20.17
Let me know if you can help, thanks

i think now you can boot into recovery and wipe everything and then try to flash the rom from sd card/

READ what is written...
You are still messing **** up...
You cannot boot ANYTHING until you get a working system on the device...
You keep "booting" to nothing because there is NOTHING to boot...
STOP for a second and READ.
I have giving you 2 options... do one of them...
The Cyanogenmod need EBI 1 kernel which you can find on the same page i gave you..
if you read the instructions, you also find i have written that...
Once again to be sure, flash EBI 1 kernel after the CM rom, then you flash gapps and you should be good to go...
Or flash "new" combo and download this rom:
http://forum.xda-developers.com/showthread.php?t=778083
I can't help any more if you don't READ before you act!

I did... wanted to take it one conservative step at a time... operating with a bad backup here... ;-) And that Kernel page on the Cyanogen wiki is just evil... it should have a source to download one and apply, for us mere mortals lol.
I downloaded an already built, already compiled EBI1 kernel, and that did work nicely. Phew.
Thanks for the tool and the help - I couldn't have done it without your help.

Okay, so question! I've got the same problem this person has with the starting point:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.0010 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
From this point, would I use the same process to get my phone to work?
..I'm a programming noob.

yawaemekat said:
Okay, so question! I've got the same problem this person has with the starting point:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.0010 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
From this point, would I use the same process to get my phone to work?
..I'm a programming noob.
Click to expand...
Click to collapse
Does your phone boot into the ROM?

I should probably explain a bit:
So my phone is caught at the "HTC Magic" screen at the startup. It won't go on any farther than that. When I hold down the VOLUME DOWN key and press the END key, I can bring up the screen that states the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT- 1.76.0010 (SAPP50000)
CPLD-12
RADIO- 6.35.10.18
The screen does give me some menu options:
HBOOT
<BACK> FastBoot Mode
<SEND> Simlock
When I press BACK, I get another set of menu options:
FASTBOOT
<VOL DOWN> HBoot Mode
<SEND> Reset Device
<ACTION> Restart to HBoot
<MENU> Power Down
..did that answer your question? ..i'm not sure.. LOL!

Yeah, so it's not booting into the ROM. Did you have root before? Did you have a custom recovery installed? Can you get into it by pressing home+power?

I bought the phone off of ebay so I don't know what was programmed on the phone before I got it.. :/

DonJuan692006 said:
Yeah, so it's not booting into the ROM. Did you have root before? Did you have a custom recovery installed? Can you get into it by pressing home+power?
Click to expand...
Click to collapse
Sent from my HTC Magic using Tapatalk

The HOME+POWER buttons bring me to a screen where there's a picture of a "!" inside of a triangle by the phone..

Your going to have to root using the goldcard method. A Google search of "root 32A magic goldcard" should get you were you need to be.

Okay, so I'm sorry to be such a noob, but I got everything ready for a Goldcard (cable and a new kingston SD), but then what I need is to set up the ADB which requires me to connect the phone to a computer.. I cannot access anything on the phone via the computer except for the memory.. the drivers won't install.
I'm using this website's instructions:
/theunlockr.com/2010/03/10/how-to-create-a-goldcard/[/url]
So, the second step is to create an ADB, and then the third requires me to access the phone itself and unmount the SD.. I'm kind of at a loss at this point..
what should I do?

You'll have to see if a friend has a phone that you can borrow to make the goldcard. The steps will be the same and it'll work on any phone running Android.

[Q] PROB stuck plz help

well im a noob to the mytouch3g but i own a slide....the prom im haveing is a friend game me his 3g cuz it was stuck at mytouch splash and well i cant get it past that
specs are
sapphire pvt 32a ship son g
hboot-1.33.0013
cpld-13
radio-6.35.10.18
so can any1 help....i can get to fastboot and hboot just not past that

He hosed the radio. The 6.35.10.18 radio is for actual 32A devices. Read through this post and the light will come on. You may be able to get the radio changed back by following the instructions in this post.

well i have tryed that sapp b4 just get to Radio V2 and sits there updating for last time i try till it went dead...i can get to fastboot hboot but not recovery

well tryed again lastnite and well sat at updateing Radio_V2 at like 90 percent for 3 hours......WHAT AM I TO DO?

Can you still get into recovery? With the phone off, turn it on holding home+power.

that takes me to the splash screen tryed.. im gonna try now that i have sd drive to use the gold card
well that didnt work hung up at thr radio_v2

Well if you can borrow a friends phone to make a goldcard, then just follow the old school guide in my sig. Hopefully it wont fail writing the radio which is what I'm thinking will happen.
Sent from my T-Mobile myTouch 3G using Tapatalk

i made the gold crad from my slide and well same thing gets stuck at thr RADIO_V2....then i pulled the bat and now have soff and tryed flashing radio through fastboot and the same thing get 90percent dont and hangs there

What radio did you try flashing? Either way, your going to have to flash a proper Engineering SPL that'll work with that radio, then flash the new radio, then the correct SPL. What are you showing in fastboot now?

sapphire unknowen 32a eng s0ff h
hoot 1.33.2010
cpld-13
radio-6.35.10.18

Alright, that one should be good. Where did you get the radio image your trying to flash and which radio is it?

ok so now this is what i have now
sapphire pvt 32a eng s0ff h
hboot 1.76.2007
cpld-13
radio-2.22.23.02
if thats right only prob i have now is i cant get into recovery...hold home power takes me to splash screen.....so how far off am i?

You need to get the stock SPL back on there. Flash recovery from fastboot, then flash the correct SPL, and then reboot. BE CAREFUL, if you flash the wrong SPL you may brick your phone. Give me about an hour and I'll link the correct files.
Sent from my T-Mobile myTouch 3G using Tapatalk

THANK YOU......i now have it back to stock had to get the right radio then i used ruu so we are back to stock.....now to root it which why do u recommend......the old or new way?

Download this, put it on the root of your SD card. With the phone booted, download/install "Appinstaller" from the market. Use it to install Universal Androot, then run the app, which will root your phone. Once Universal Androot root's your phone, start at Step #6 from this guide.

Is this HTC Magic bricked?

Hello,
I recently tried to update the spl/radio to use a new rom on my HTC Magic 32A and after updating the spl the phone just hangs on the "HTC Magic" screen. Fastboot or Recovery wont start if I hold the buttons. Was just wondering if it is bricked or if it is possible to fix via cmd or so? I read alittle on jtag but I think if it came down to that Ill just buy a new phone cause this phone is not worth that much trouble.
I rooted the phone a year or so ago. First I had cyanogen but they dropped support so I switched too gingeryoshi but the wifi stopped working. It still connected to tmobile hotspot but I couldnt tether or connect to my wifi. So I thought of putting on Froyodragon. I updated too HBOOT-1.76.2007 but then it just hanged on reboot.
Thanks for any input.

Turn phone off (if you have bootloop then remove battery and place it back after 10-20 sec)
Turn on by pressing Back + Power - it's fastboot-mode
Write first 5 rows of info (all symbols are important)
If you do not have Android Sdk Tools configured - do it
Additionaly search for fastboot.exe - this utility can be absent from sdk tools
Connect phone to pc when it in fastboot-mode
Run
Code:
fastboot getvar cid
fastboot getvar cidnum
fastboot getvar version-main
Sent from my A7-040 using Tapatalk

hello,
I tired back+power, power+vol down, and power+home, they all just sit at the "HTC Magic" screen.

Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?

same problem
Sir im also facing the same problem like this person is facing:
I guess that I've bricked my HTC magic phone. actually it was working fine but after when i flash Hboot file named (ISO-8859-1__STOCK-HBOOT) on it.
my device stop functioning not any key is working phone its not coming up in hboot loader screen by pressing vol down key+power key, not even in recovery mode. by pressing home key+ power key.
but if i press vol down+power key its not showing any hboot loader screen but if i use command prompt after that and use fastboot devices command its shows the device like in machine language
just like this:
D:\adb\tools>fastboot devices
?╞ñ?¿╥§?4:¶♫ fastboot
here are the details of my mobile. is there any way to fix this issue?
HT03VPB03044
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.28.25
OCT 21 2009, 22:33:27
android 2.2.1
baseband version
62.50sj.20.17u_2.22.28.25
kernal version
2.6.32.9-g94b855e
[email protected] #1
buid number
3.56.531.1 CL300801 realase-keys
Sir i've also created gold card on my htc magic phone when it was working properly i've the image of gold card and the same card 512MB micro SD card which i used to create the gold card before but i dont know how it will work on the phone as it is not going into bool loader or in recovery mode.
please help me. i heard that if i got correct RUU file for this device i can troubleshoot the problem but in stock rom no any RUU file is working on it.
I've already tried there RUU ROM on this device:
RUU_Sapphire_T-Mobile_US_2.10.531.3_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_2.10.531.4_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_3.12.531.1_FRG83D_release_signed
RUU_Sapphire_TMUS_1.94.531.1_DMD6_release_signed_N oDriver
i request all the XDA member to help and troubleshoot this problem.
regards
Sandeep Deol

5[Strogino] said:
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
Click to expand...
Click to collapse
Yes I removed the battery (only way i could turn it off). I stated most of this info in the first post but Ill try and state specifically what versions I had. When I first rooted I used Cyanogen Rom. It worked fine but they dropped support so I switched too Gingeryoshi. I dont remember what version. I tried to update it too 1.5 first but it didnt work but fastboot and recovery still worked so I decided to switch to a new rom instead and tried Froyodragon but it needed radio 6.35.16.19 and HBOOT-1.76.2007. So I wiped it then I did the HBOOT-1.76.2007 and after installing and rebooting is when it stopped working.

Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.

jmdsdf said:
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
Click to expand...
Click to collapse
Wait 5-10 minutes, "yellow arrow coming from box" equals unpack and flash. Phone should finish this process.
Try to load into hboot-mode: turn phone off (remove battery and place it back if bootlooping), then turn on by pressing Volumedown + power
In this mode you can flash full official rom in sappimg.zip format (or sappimg.nbh if you have 32b magic)
If phone doesn't load into any mode (except trackball + power) - then you have brick and only jtag can help.
Sent from my A7-040 using Tapatalk

But, it goes to a black screen about ten seconds after that.. sadly I think it needs to be jtagged and i will just give it away for parts.
I also tried the sapphire image trick, no luck.

those all sound like bricks..

problem with 32b - looping after rom.
Believe me, I tried a lot here and on google before posting here.
I tried to install a ROM on my htc magic 32b and certainly was not what I should.
Information from my device:
SAPPHIRE PVT 32B SHIP S-ON G
Hboot-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
OCT 21 2009,22:33:27
I've read very, very much. I read that I have to change the SHIP for ENG.
Also read about ruu, but I found a will for my device, nor know how to run.
First of all, my phone is only on LOOP. I can normally access the fastboot USB.
But does not accept commands, I believe it because of S-ON.
I do not know how to install an img it to get S-OFF.
Could someone help me get back my life device?
Thank you and with the help of google translator.

huahua!!!!
No one post about my problem...

HTc my touch 3g Possibly Bricked

i have T-Mobile my touch 3g
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0007 (SAPP30000)
CPLD-10
RADIO - 2.22.23.02
JUL 31 2009
I am a newbie in installing ROMs ,but i followed instructions and did everything needed.I flashed it to 1.33.2005 and installed this Rom "vf_magic_frg83d_aim1_nohboot_s_2.zip" .When installaion finished i pressed Back + Power to reboot ,but then at bottom i read this line "Writing radio.." and the phone gets rebooted . Since then my phone is stuck at Red Vodafone splash screen.I cant get into any mode i.e fastboot or hboot or anything i tried
1.Volume low + power
2.Home + Power
3.Back + Power
I will do anything from those 3 but the phone will not enter any mode ,it will just get stuck on vodafone screen .
PLease help me

snakeb4u2001 said:
i have T-Mobile my touch 3g
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0007 (SAPP30000)
CPLD-10
RADIO - 2.22.23.02
JUL 31 2009
I am a newbie in installing ROMs ,but i followed instructions and did everything needed.I flashed it to 1.33.2005 and installed this Rom "vf_magic_frg83d_aim1_nohboot_s_2.zip" .When installaion finished i pressed Back + Power to reboot ,but then at bottom i read this line "Writing radio.." and the phone gets rebooted . Since then my phone is stuck at Red Vodafone splash screen.I cant get into any mode i.e fastboot or hboot or anything i tried
1.Volume low + power
2.Home + Power
3.Back + Power
I will do anything from those 3 but the phone will not enter any mode ,it will just get stuck on vodafone screen .
PLease help me
Click to expand...
Click to collapse
You have a PVT 32B board instead of a PVT 32A board. Sorry but I think its bricked.

What manual did you follow? Google did not find this file "vf_magic_frg83d_aim1_nohboot_s_2.zip" even.
Did you try remove battery and place it back and then loaded into mode?

5[Strogino] said:
What manual did you follow? Google did not find this file "vf_magic_frg83d_aim1_nohboot_s_2.zip" even.
Did you try remove battery and place it back and then loaded into mode?
Click to expand...
Click to collapse
Yea did try removing battery,sim card,sd card .didnt work
i forgot which manual i followed :|

snakeb4u2001 said:
Yea did try removing battery,sim card,sd card .didnt work
i forgot which manual i followed :|
Click to expand...
Click to collapse
If you can not load into any mode - you have a *BRICK*
It's impossible to restore via software methods
Search for repair-shop and ask master about JTAG (it is hardware with ability to flash SPL directly)

Will do bro.
Thanks for help