Related
Hello,
I open a thread to describe my problem since nobody could help me until now. I guess this must be an advanced problem, because I don't think I'm noob enough to have screwed something up.
So fisrt of all, the background :
Had a problem with wifi after a fall: low range, crappy bandwith, disconnected all the time
Sent my phone to RMA service TWICE : not fixed in the first time, some hardware piece changed the second time
Got back my phone : firmware updated to 3.14, radio 2.15, wifi working perfectly under WinMo
From there, it gets complicated. At first, I decide to try my old cedsmith sense build, the first with new initrd.gz : wifi works fine
Then I try Darkstone froyo RAM build : wifi connects, gets an IP (I see my device from my router's control pannel), BUT NO DATA, market, browser, web apps won't load...
Then I go to cedsmith's desire HD build (not RAM) : wifi works fine...
Then I decide to try MIUI Star RAM build : wifi works for 2 day, with data freezes and timeouts, then it do not work anymore...same problem as Darkstone's RAM build.
Then NAND arrives :
I try DFT Desire build : wifi ok
I try Gauner1986 Desire HD build : wifi ok
I try CM6.1 build : wifi not ok
I try tytung's Nexus build : wifi not ok
Now I'm back to DFT's desire build, and wifi works perfectly.
So after processing data in my mind, the main common factor in working build is Sense, and no Sense for non working builds...
May I assume that HTC RMA service may have replaced some wifi chipset or antenna for a different one, working with only with HTC builds because they have specific drivers?
I have tried to ping from non working builds with Terminal Emulator :
Router is fine (192.168.0.1 : every packet is transmitted)
www.google.com is not fine (around 1 packet off 5 is transmitted...)
I have an european HD2 with 512Mo of internal storage, so I would like to be able to use non sense build, essentially for space matter...To conclude, I have to questions, mostly for programmers since this is an advanced issue : what do you think my problem is, and what can I do to to fix it...if it can be fixed?
Thank you for your help.
UPDATE : My issue has been solved by adding another router to my local network, dedicated to my phone. It is a Hercules HWNRi-300, with 802.11n feature , so maybe it's the différence with my previous router which only supported 802.11g or maybe it was due to an IP conflict, traffic issue, I don't know...But now that my HD2 has its own dedicated AP, with its own IP sub network, it works perfectly fine, even with non-sense builds.
But anyway, if someone can find a solution for other dudes with the same problem, it would be cool, that is why I'll let this thread hanging around and matbe update it from time to time, since, even if a workaround has been found, the real issue hasn't been really fixed yet.
Thanks everybody for helping and goodluck to others.
It's unlikely any of the ROM programmers will come here.
Do you have a firewall installed?
I was having similar problems before with data/wifi working on some builds and not others but then I figured out it was DroidWall - it was behaving differently on different builds. On some builds, I had to "allow all" in the "white list" in order for data to work.
pkchips said:
It's unlikely any of the ROM programmers will come here.
Do you have a firewall installed?
I was having similar problems before with data/wifi working on some builds and not others but then I figured out it was DroidWall - it was behaving differently on different builds. On some builds, I had to "allow all" in the "white list" in order for data to work.
Click to expand...
Click to collapse
No, I don't have any firewall installed. And I have DMZed the IP obtained by my HD2...
Actually, on these builds, wifi NEVER WORKED, blank data.img no app installed, nothing at all...
Suggested by RedWave31 :
About your problem, seems ur having conflicts about either build.prop, or modules.
One solution i thought about:
- Launch a sense build in wich the wifi works
- Go into system/lib/modules and backup all files in there
- Launch the CM6.1 build
- Replace the cm6 modules with the sense modules
- chmod 777* the folder
- reboot and try
>This may take time like 15 minutes, but for now, it's the only solution that came to my mind
Click to expand...
Click to collapse
My answer :
Thx, I'll add it to my thread (to remember it). I will try to apply solution when I have several suggestions, but I think it won't changer anything : I have already tried to change the kernel on RAM builds, with RAM compliant Hastarin 8.6 with CIFS, copied the bcm.ko and tun.ko modules, and it did not fix the issue...
Click to expand...
Click to collapse
I have also tried to modify build.prop's DNS with google public DNS,no success...
The wifi did not work for me on the CM 1.02 NAND build either, it just said error even tho 1.02 was supposed to fix the wifi lol
i dont think its your phone, iv had on and off wifi issues with every rom sense or not since i began using android builds on my HD2.
and dont even get me started on bluetooth !! I ended up switching to a HTC Desire until just recently NAND came out. Still then i had no wifi on the CM 1.02 NAND build
Nexus wifi worked and MDJ gingerbread wifi and bluetooth worked for me
Visentinel said:
The wifi did not work for me on the CM 1.02 NAND build either, it just said error even tho 1.02 was supposed to fix the wifi lol
i dont think its your phone, iv had on and off wifi issues with every rom sense or not since i began using android builds on my HD2.
and dont even get me started on bluetooth !! I ended up switching to a HTC Desire until just recently NAND came out. Still then i had no wifi on the CM 1.02 NAND build
Nexus wifi worked and MDJ gingerbread wifi and bluetooth worked for me
Click to expand...
Click to collapse
I NEVER had ANY problem with wifi, using more than 10 different builds, Sense and non Sense, for months until sending my phone to RMA for...wifi issue (on Android and Winmo).
So I'm kind of sure it is related...
Tried JAWS' MIUI nand build, and JMDS ultimate build, same issue...
Help please !
I think your issue is the age old RMNET vs PPP builds. Using 3.14 rom and radio 2.15, you should be using a PPP build, which is why I think only those that use PPP, which I believe is only the Desire Builds, is what is causing your issues. But I'm only taking a stab in the dark with one, because I Jaws MIUI is working just fine for me, and i had both 3.14 rom and 2.15 radio, and everything works just fine. If the other builds are working, then why not just use those till something else comes out?
My problem is about WIFI man c'mon, did you even read my first post?
And it's not a winmo version problem or a radio problem : I had switched to chuckydroid and radio 2.10.50.28_2 before flashing MAGLDR....And problem was the same.
Thanks for trying to help really. But I think it is a very specific issue : if twas not, I surely wouldn't have opened a thread about it...
Sent from my HTC HD2 using XDA App
well its certainly not sense vs non-sense problem. it could be a number of issues, one of them possibly being a kernal issue with specific builds. NAND is still very buggy right now, with lots of problems popping up that people didn't expect, so if you find one that works and really want NAND then use the one that works, pretty simple. I can tell you its not a hardware problem because if it was, it wouldn't work on anything, sense or non-sense, sd, ram, or nand build.
@ OP I have the the same problem. Check out the thread I started. Tell me if this is the same problem your having. Been dealing with this forever. http://forum.xda-developers.com/showthread.php?t=879482 I want to fix this problem once and for all.
try this :
when u connected to wifi
check gateway ip and dns
i believe for ip u already have a correct one because you can ping your router, but if gateway and dns has wrong value then data from wifi will not work..
to do that, run terminal or adb shell from ur pc, type :
#busybox ifconfig
find wlan0 and look at ip and gateway
#getprop net.dns1
#getprop net.dns2
this dns value must match with your router dns value (or whatever the internet provider backbone in ur router)
the easy way to look at ur dns router is by looking at status network conection in control panel..
Beretta93 said:
Hello,
I open a thread to describe my problem since nobody could help me until now. I guess this must be an advanced problem, because I don't think I'm noob enough to have screwed something up.
So fisrt of all, the background :
Had a problem with wifi after a fall: low range, crappy bandwith, disconnected all the time
Sent my phone to RMA service TWICE : not fixed in the first time, some hardware piece changed the second time
Got back my phone : firmware updated to 3.14, radio 2.15, wifi working perfectly under WinMo
From there, it gets complicated. At first, I decide to try my old cedsmith sense build, the first with new initrd.gz : wifi works fine
Then I try Darkstone froyo RAM build : wifi connects, gets an IP (I see my device from my router's control pannel), BUT NO DATA, market, browser, web apps won't load...
Then I go to cedsmith's desire HD build (not RAM) : wifi works fine...
Then I decide to try MIUI Star RAM build : wifi works for 2 day, with data freezes and timeouts, then it do not work anymore...same problem as Darkstone's RAM build.
Then NAND arrives :
I try DFT Desire build : wifi ok
I try Gauner1986 Desire HD build : wifi ok
I try CM6.1 build : wifi not ok
I try tytung's Nexus build : wifi not ok
Now I'm back to DFT's desire build, and wifi works perfectly.
So after processing data in my mind, the main common factor in working build is Sense, and no Sense for non working builds...
May I assume that HTC RMA service may have replaced some wifi chipset or antenna for a different one, working with only with HTC builds because they have specific drivers?
I have tried to ping from non working builds with Terminal Emulator :
Router is fine (192.168.0.1 : every packet is transmitted)
www.google.com is not fine (around 1 packet off 5 is transmitted...)
I have an european HD2 with 512Mo of internal storage, so I would like to be able to use non sense build, essentially for space matter...To conclude, I have to questions, mostly for programmers since this is an advanced issue : what do you think my problem is, and what can I do to to fix it...if it can be fixed?
Thank you for your help.
Click to expand...
Click to collapse
I had the same problem than you and fixed it.
Go in advanced wifi settings and click on 14channel wifi regulator
zachmerrill504 said:
well its certainly not sense vs non-sense problem. it could be a number of issues, one of them possibly being a kernal issue with specific builds. NAND is still very buggy right now, with lots of problems popping up that people didn't expect, so if you find one that works and really want NAND then use the one that works, pretty simple. I can tell you its not a hardware problem because if it was, it wouldn't work on anything, sense or non-sense, sd, ram, or nand build.
Click to expand...
Click to collapse
It has nothing to do with NAND, it occured before MAGLDR's release. You can tell me it's not a hardware problem without even reading my first post? How do you know it's not a driver problem, which is hardware related?
Please, this kind of advice won't help, thank you for bothering but do not anymore.
Regards.
mattfmartin said:
@ OP I have the the same problem. Check out the thread I started. Tell me if this is the same problem your having. Been dealing with this forever. http://forum.xda-developers.com/showthread.php?t=879482 I want to fix this problem once and for all.
Click to expand...
Click to collapse
I've read your thread. It seems like a similar issue, but it's not quite the same. For me, even browser is not working, the loading bar is stuck at the very beginning.
The only proof of connexion Icould get was this ping to google, 1 packet of 5 reaching destination, and I with speed test, like 3 to 4 minutes after launch, I could get the button "Begin test". The results were 999 for the ping, -0kb for the download, and for upload, I had some positive, like 20 to 50kb. But the test was very long...
So it makes me conclude that it's not quite the same issue...
lesjaw said:
try this :
when u connected to wifi
check gateway ip and dns
i believe for ip u already have a correct one because you can ping your router, but if gateway and dns has wrong value then data from wifi will not work..
to do that, run terminal or adb shell from ur pc, type :
#busybox ifconfig
find wlan0 and look at ip and gateway
#getprop net.dns1
#getprop net.dns2
this dns value must match with your router dns value (or whatever the internet provider backbone in ur router)
the easy way to look at ur dns router is by looking at status network conection in control panel..
Click to expand...
Click to collapse
I thought it might be a DNS problem, but since I've modified the build.prop with google DNS values, I assumed that it should have settled it. For the gateway, since I can ping 192.168.0.1, gateway must be correctly set up right?
I'll test your idea and will let you know the results. Thank you for helping.
asphaltkiller said:
I had the same problem than you and fixed it.
Go in advanced wifi settings and click on 14channel wifi regulator
Click to expand...
Click to collapse
I already did that and it solved nothing. But thanks for helping.
lesjaw said:
try this :
when u connected to wifi
check gateway ip and dns
i believe for ip u already have a correct one because you can ping your router, but if gateway and dns has wrong value then data from wifi will not work..
to do that, run terminal or adb shell from ur pc, type :
#busybox ifconfig
find wlan0 and look at ip and gateway
#getprop net.dns1
#getprop net.dns2
this dns value must match with your router dns value (or whatever the internet provider backbone in ur router)
the easy way to look at ur dns router is by looking at status network conection in control panel..
Click to expand...
Click to collapse
DAMN I can't believe it ! Wifi worked for like ONE hour ! Then plop, went bugging again !
I flashed MDJ Froyo Revolution, then in order to check your idea, went back to tytung's Nexus NAND, and wifi worked ! Then I went to JMDS build, and wifi worked again at first, but when I tried to connect later, bug was back !
So I checked your commands, DNS displayed is the one of my provider (even if the build.prop is different), and gateway is strange : 192.168.0.255 instead of 192.168.0.1, but the fact is that I did the same thing with fully working sens build, and result was the same...
I'm getting more and more confused there.
So...any idea?
Help...Please guys....
Hi all,
Wondering if anyone knows how to make Android open the ports necessary for incoming connections for server apps to work without having to ping the client first under su?
Or failing that, is there a way to run a script that will ping the client IP instead of having to run the command by hand in terminal?
Thanks!
New, clearer, catchier title
This is the dev section not Q&A.
TheATHEiST said:
This is the dev section not Q&A.
Click to expand...
Click to collapse
Sorry, my bad. Mods, could someone please move my question to the appropriate venue?
LOVE your nick and avatar, dude!
Greetings from a fellow damned heathen!
i would really love to see a solution there too!
RemoteSMS over wlan would be awesome
Yom said:
Sorry, my bad. Mods, could someone please move my question to the appropriate venue?
LOVE your nick and avatar, dude!
Greetings from a fellow damned heathen!
Click to expand...
Click to collapse
.............
Any takers?
Posted from My Hacked HD2
Second that! Something's off in 99/100 ROMS, TCP doesn't seem to do anything. Only one Sense ROM by cotulla seems to work.
I disabled the adblocking hosts file to test if it had anything to do with it (e.g. SSHDroid doesn't work with it) but that didn't help anything either
Agreed, does not seem to work on any rom I've tried, only Cotulla's 'Stock Desire' Sense build seems to work (this one: http://forum.xda-developers.com/showthread.php?t=893620).
Too bad Sense's so completely dire, otherwise I'd use that. I want CyanogenMOD.
Having the same question. I am sure here must be someone who knows how to enable inbound connections....
Little update:
I noticed it is possible for me to ping and use all services when using the gateway to access everything, in my case the access point/wifi router.
So it looks like this is some kind of routing/firewall issue but I can't find anything about default blocking or firewalling on android...
Good news. I found out what is causing this on almost every build.
It has something to do with the stock wifi tethering. If you try and enable it in almost every rom it will fail, but now turn on your wifi again and everything works as it would normally do!
The build it does work on also has working stock wifi tethering, so that explains that...
For now it's good to have this workaround and I hop to have a proper fix in the future
im using RAFDROID 3.0 and i dont think i have this problem at all. I tried SwiFTP and it connected without any issues.
Try to update the busybox version mine is 1.15.2
SantanaNL said:
Good news. I found out what is causing this on almost every build.
It has something to do with the stock wifi tethering. If you try and enable it in almost every rom it will fail, but now turn on your wifi again and everything works as it would normally do!
The build it does work on also has working stock wifi tethering, so that explains that...
For now it's good to have this workaround and I hop to have a proper fix in the future
Click to expand...
Click to collapse
I tried this on Frankinstine's awesome ROM, but no cigar. There has to be a firewall rule or setting we can tweak to allow this kind of traffic...
Yom said:
I tried this on Frankinstine's awesome ROM, but no cigar. There has to be a firewall rule or setting we can tweak to allow this kind of traffic...
Click to expand...
Click to collapse
It works for me, but it's not 100% foolproof. It seems to work for a while, but not permanently. However, it's still better than the ping method. The ping method would never work for me, since I use Wifi at least 4 different places a week. Even when done automatically, how would I know what to ping on what Wifi network?! Random DHCP on workstations notwithstanding...
This does it for me:
turn on normal Wifi
wait around 10 seconds (for Wifi to 'start')
turn on Wifi hotspot (normal wifi should turn it self off automatically)
wait around 20 seconds (the hotspot takes a while to 'start', it actually fails (error) for me, but still does the trick)
turn normal Wifi on again
At that point it "works" for me, at least for a while.
At the very least this seems to indicate that the broken Wifi hotspot and this problem are related -- on Cotulla's build (where stock Wifi hotspot WORKS), this problem is non-existent.
Unfortunatly your steps do not work for me :-(
strikernl said:
It works for me, but it's not 100% foolproof. It seems to work for a while, but not permanently. However, it's still better than the ping method. The ping method would never work for me, since I use Wifi at least 4 different places a week. Even when done automatically, how would I know what to ping on what Wifi network?! Random DHCP on workstations notwithstanding...
This does it for me:
turn on normal Wifi
wait around 10 seconds (for Wifi to 'start')
turn on Wifi hotspot (normal wifi should turn it self off automatically)
wait around 20 seconds (the hotspot takes a while to 'start', it actually fails (error) for me, but still does the trick)
turn normal Wifi on again
At that point it "works" for me, at least for a while.
At the very least this seems to indicate that the broken Wifi hotspot and this problem are related -- on Cotulla's build (where stock Wifi hotspot WORKS), this problem is non-existent.
Click to expand...
Click to collapse
engst03 said:
Unfortunatly your steps do not work for me :-(
Click to expand...
Click to collapse
That's unlucky. Those steps seem to "work" for me on CleanDroid 1.30. Maybe we can just hope it works again when the stock wifi hotspot is fixed.
Alternate "solution":
Get Cotulla's "Stock Desire" ROM: http://forum.xda-developers.com/showthread.php?t=893620
It definitely works on that. Too bad sense is dog****, and your battery will last for a day max.
strikernl said:
This does it for me:
turn on normal Wifi
wait around 10 seconds (for Wifi to 'start')
turn on Wifi hotspot (normal wifi should turn it self off automatically)
wait around 20 seconds (the hotspot takes a while to 'start', it actually fails (error) for me, but still does the trick)
turn normal Wifi on again
Click to expand...
Click to collapse
Just tried this and it worked. As soon as I started the wifi the second time my computer started pinging HD2.
My usual procedure for fixing this was to start wifi, see assigned IP address and then ping my computer from 'Net Ping' app. This can be faster sometimes.
Is there a way to port hotspot from Cotulla's build to a nonSense build? No way for me to come back to sense again
clyder said:
Just tried this and it worked. As soon as I started the wifi the second time my computer started pinging HD2.
My usual procedure for fixing this was to start wifi, see assigned IP address and then ping my computer from 'Net Ping' app. This can be faster sometimes.
Is there a way to port hotspot from Cotulla's build to a nonSense build? No way for me to come back to sense again
Click to expand...
Click to collapse
Don't know, it's probably in the kernel, so shouldn't be too difficult, but then again, I haven't really got a clue about building ROMs.
agarp said:
im using RAFDROID 3.0 and i dont think i have this problem at all. I tried SwiFTP and it connected without any issues.
Try to update the busybox version mine is 1.15.2
Click to expand...
Click to collapse
RAFDROID is also a sense build, we want it to work on all builds, stock and CM
I have an HD2 with CyanogenMod7.1 HTC Leo 080111.
I changed my wifi access point and lost connection to it.
Everything else is connecting: Laptops, Motorola Defys and other.
Even the same HD2 with Windows 6.5 (prior to booting Android) connects fine.
I tried to vi wpa_supplicant.conf several times with different settings but at no avail.
I guess the problem is in the ROM. But where? Any clues?
Thanks
makhd2 said:
I have an HD2 with CyanogenMod7.1 HTC Leo 080111.
I changed my wifi access point and lost connection to it.
Everything else is connecting: Laptops, Motorola Defys and other.
Even the same HD2 with Windows 6.5 (prior to booting Android) connects fine.
I tried to vi wpa_supplicant.conf several times with different settings but at no avail.
I guess the problem is in the ROM. But where? Any clues?
Thanks
Click to expand...
Click to collapse
had similar problem on HD2 CM mod (ACA), not sure if it'll work for you but try to disable and enable SSID Broadcast on your router (saving the router settings each time)
Your solution works for me
Thanks a lot. It worked also after disabling/re-enabling the wifi on the android.
Thanks again.
The problem returned
This solution is temporary. After the phone get really out of range and returns, it does not recognize the SSID.
Do you know what is the root cause of the problem?
Thanks
makhd2 said:
This solution is temporary. After the phone get really out of range and returns, it does not recognize the SSID.
Click to expand...
Click to collapse
strange, and I'm out of any ideas, apart from the painfully obvious ones:
- is your wifi hidden? allegedly some roms have problems sometimes with reconnecting to hidden networks
- try changing routers channel to 1, 4, 6 or 11
- seems you're using SD build, if so maybe update it to the newest version, with fresh data.img, do not restore wifi access point but set it anew
Once again it worked
Out of your list I tried everything except setting the channel.
My Access Point worked with Auto channel, meaning that it could change it to the least busy one. For some reason, HD2 did not like it.
Now it works (meanwhile) with channel 4.
I hope for some stability.
Thanks again.
It works fine for the last couple of days. So the proble is the dynamic channel allocation. I guess that at least this ROM feels better with static one.
Thanks.
Thanks to the FAQ by antony.ps
antony.ps said:
8) Can't connect to my wireless network.
- Tap and hold the SSID of the network and select Forget
13) How can I make GPS work better (be more fast and precise)?
- Make a backup of your /etc/gps.conf (use a file manager to rename or copy to another place)
- Visit this thread
- Click in the link "XDA Members Click Here" at the final of the post, and search for the correct .zip for your country
- Copy the .zip to your SD Card and reboot in Bootmenu, then flash the zip via Custom Recovery
Click to expand...
Click to collapse
For me, Wifi and GPS don't seem to be giving problems. But again, thanks for bringing in the useful information.
not working in Brazil with Cm7 rom ported from defy
On my UK 2.2.2 android there is no /system/etc/gps.conf file. Maybe this GPS fix is only for HTC phones.
In MIUI, I have the file in
/system/etc/gps.conf
and
/etc/gps.conf
sahilarora911 said:
In MIUI, I have the file in
/system/etc/gps.conf
and
/etc/gps.conf
Click to expand...
Click to collapse
/etc is a symlink to /system/etc the files are the same.
Sent from my Milestone 2 XDA App
dangpzanco said:
/etc is a symlink to /system/etc the files are the same.
Sent from my Milestone 2 XDA App
Click to expand...
Click to collapse
I don't know much about unix based systems, so pardon my ignorance
But it's nice to learn..
sahilarora911 said:
I don't know much about unix based systems, so pardon my ignorance
But it's nice to learn..
Click to expand...
Click to collapse
=D Don't worry.
This port not working on my MS2...
I have an issue whit my wifi:
it stopped receiveing wifi signal, then I flashed the last version but it still not receiving any wifi signal.
I tried to delete my saved wifi and it doesn't work
a data wipe can help?
any suggestion?
I use cyanogenmod 7 rom
skaburn said:
I have an issue whit my wifi:
it stopped receiveing wifi signal, then I flashed the last version but it still not receiving any wifi signal.
I tried to delete my saved wifi and it doesn't work
a data wipe can help?
any suggestion?
I use cyanogenmod 7 rom
Click to expand...
Click to collapse
Are you using the latest version of the Rom?
Did you flash a Froyo and/or a GB SBF?
Sent from my Milestone 2 XDA App
Wifi problems with 802.11 N + PEAP Authentication
Hi folks!
Here in my university we have a Network called Eduroam (www.eduroam.org , probably you've already heard about it).
The Hotspots are N capable, so my phone, if connected, shows a speed of 65 Mbps. For the authentication, we use MSCHAP v2. So far, so good...
Now to the things I experienced: @ home, where I use a 802.11g network, everything seems to be ok.
Here in the university it's not. Sometimes it needs a really long time to connect to the network, and sometimes it drops the connection just shortly after. Switching off and on again speeds up the process a lot.
But now to the worst part: Often, the connection is shown as established ('Connected'), but in reality there is no connection: No mail connection, no HTTP connection, ping doesn't go through... nothing. Even it shows it is still connected.
Now I am not sure if this issue is caused by the autentication or the N Network , but I can say two things for sure:
1. My laptop, when connected to the same network with the same parameters works fine.
2. It has been working fine up to the transition from Android 2.3.5 to 2.3.7.
I'm running cm7-20111021-NIGHTLY-Milestone2-ICS-pre_stable-v1.5 on a A953, but was also experiencing those issues on builds before that one.
I'd have loved to post this into the developement thread, because I have already seen someone describing a simmilar issue (less detailed unfortunately), but I can't due to the 10 posts minimum rule.
Best regards and thanks for that great port, Endless !
jsschmid said:
Hi folks!
Here in my university we have a Network called Eduroam (www.eduroam.org , probably you've already heard about it).
The Hotspots are N capable, so my phone, if connected, shows a speed of 65 Mbps. For the authentication, we use MSCHAP v2. So far, so good...
Now to the things I experienced: @ home, where I use a 802.11g network, everything seems to be ok.
Here in the university it's not. Sometimes it needs a really long time to connect to the network, and sometimes it drops the connection just shortly after. Switching off and on again speeds up the process a lot.
But now to the worst part: Often, the connection is shown as established ('Connected'), but in reality there is no connection: No mail connection, no HTTP connection, ping doesn't go through... nothing. Even it shows it is still connected.
Now I am not sure if this issue is caused by the autentication or the N Network , but I can say two things for sure:
1. My laptop, when connected to the same network with the same parameters works fine.
2. It has been working fine up to the transition from Android 2.3.5 to 2.3.7.
I'm running cm7-20111021-NIGHTLY-Milestone2-ICS-pre_stable-v1.5 on a A953, but was also experiencing those issues on builds before that one.
I'd have loved to post this into the developement thread, because I have already seen someone describing a simmilar issue (less detailed unfortunately), but I can't due to the 10 posts minimum rule.
Best regards and thanks for that great port, Endless !
Click to expand...
Click to collapse
Probably you can try switching off the N network from your phone. Force it to connect through G.
This post might help you.
http://forum.xda-developers.com/showpost.php?p=9467118&postcount=4
It basically disables n network from Milestone 2
You can give it a shot.
I delete all my wifi connections, reboot the cell and work all good..
Enviado desde mi MotoA953 usando Tapatalk
Good for me
Neuralsystem said:
not working in Brazil with Cm7 rom ported from defy
Click to expand...
Click to collapse
Seemed to work for me. Im with CM7 too.
Download and installed South America.zip
Thanks a lot for the post
Hi everyone,
yesterday I was it my friend and tried to connect to his access point. He has b/g AP with WPA2 password protection & DHCP enabled. But when I tried to connect it kicked me off in authetication state and tried to connect again - but without success. I tried to disable and enable wifi, deleting saved connection, but nothing of this helped me.
I'm using CM7 - does anyone have similiar or same problem - connecting to WPA2-PSK wifi? I'm using WPA at home and it works ok - I just want know if it is global problem with CM7 on Milestone 2 or just me (or just this AP) and what solutions can i try.
Thanks for suggestions.
I know it is not here but my phone is locked in airplane mode!
Anonymous_ said:
Hi everyone,
yesterday I was it my friend and tried to connect to his access point. He has b/g AP with WPA2 password protection & DHCP enabled. But when I tried to connect it kicked me off in authetication state and tried to connect again - but without success. I tried to disable and enable wifi, deleting saved connection, but nothing of this helped me.
I'm using CM7 - does anyone have similiar or same problem - connecting to WPA2-PSK wifi? I'm using WPA at home and it works ok - I just want know if it is global problem with CM7 on Milestone 2 or just me (or just this AP) and what solutions can i try.
Thanks for suggestions.
Click to expand...
Click to collapse
It always happens to me on my uncle's house. His wifi is WPA2 and has such a BIG password, but when I try to connect the phone acts as if nothing happened...
I think it's a global problem with Milestone 2, because it didn't work in any Rom, Froyo/CM7/GB/MIUI.
Sent from my Milestone 2 XDA App
MasterTB said:
I know it is not here but my phone is locked in airplane mode!
Click to expand...
Click to collapse
Reboot, disable airplane mode, than reboot again.
Sent from my Milestone 2 XDA App
in my MS2, wifi will connect and disconnect again and again, even if forgeting my wireless node
Hi !
Since a while, wifi tethering isn't working in CM10 including the very last build (2013\10\30) ...
No applications of the market work ...
Is there a solution for that ?
Found why ...
fred_pitoizet said:
Hi !
Since a while, wifi tethering isn't working in CM10 including the very last build (2013\10\30) ...
No applications of the market work ...
Is there a solution for that ?
Click to expand...
Click to collapse
FOUND IT !!!
I was trying to connect to the phone with my pc...
dmesg and logcat said all was correct (hostap, dnsmasq, dhcp, etc ...)
When I've looked into the IP configuration of my PC, found the solution...
Forgotten that I had configured my PC to have static ip configuration, because it acts as server sometimes ...
When I switched to dynamic ip configuration, all was fine.
SO, There's no problem with the WIFI Tethering in CM10 ...