Related
Hi,
I've trawled the forum and I've followed all the TomTom setup procedures. The Problem is they seem to be for people who can't get TomTom working at all. I can get it working, just awkwardly.
Once I pair with my GPS receiver and go into TomTom i can get a connection. However when i quit TomTom and turn off the GPS it seems to forget. Next time I turn it on I don't get a connection.
The way I understand TomTom is that it seems to wait for the GPS receiver to contact the phone. This seems odd as I would have thought the phone would be the one to initiate contact.
Anyway my GPS receiver just seems to forget what phone it was connected to. TomTom obviously isn't forgetting the port, windows obviously isn't forgetting the pairing. But Every time I use it I have to re-pair the receiver (thus reminding the receiver of the phone it's supposed to be bonded to). It's beginning to drive me a bit insane.
Anyone else have this issue? Perhaps it's to do with my incoming and outcoming ports? Hopefully someone has already solved this? Not seen any references to it anywhere.
Lewis
Hello,
Which version of Tomtom are you using ? The last one (5.21) ? If not, try to upgrade and try again.
Yep 5.2 latest release.
I was hoping upgrade would fix it but alas no.
Lewis
BigDamHero said:
Yep 5.2 latest release.
I was hoping upgrade would fix it but alas no.
Lewis
Click to expand...
Click to collapse
Don't mean to be picky, but 5.2 or 5.21?
I've held off installing TTN on my Wizard, as it works fine on my iPAQ 4700, I have a cradle for that, and according to ttcode, my current device is actually my old 3970, not the current iPAQ... Last week, I had a couple of hour drive to do, so I thought I'd give it a whirl. After an email exchange with TomTom support (who were more helpful than I'd originally given them credit for), I had a new activation code for the Wizard. Here's what I did, from a fairly recent hard reset with no previous TTN install whatsoever. Skip the mail if it doesn't look helpful, but I'll detail my steps in case it helps anyone else...
Although I believe the PC install is mended in 5.21 I copied the map and voice cab files from the CD to my SD card and installed them from there. The GPS drivers and main app I installed from the download I got from the TomTom support site by running the setup util on my PC. Once everything was installed, I moved the maps which seemed to finish up in a sub-directory on the card to the root of the card.
I paired the GPS (my old Emtac BT one) and selected serial port profile. I tried all the offered serial ports in the "Other BT GPS" list in TTN but none worked. Then I went to 'COM Ports' in Comm Manager/Bluetooth Settings and selected "New Outgoing Port". I picked the GPS from the list of paired SPP devices, and it created a new BT COM port on COM6. That definately hadn't been in TTN's list of BT com ports before, but is now there in the list with about half a dozen others. I selected that in the "Other BT GPS" list of BT ports, and TTN connects to the GPS each time.
As I said, I'd recently hard reset the device to try and prove a problem with my BT car-kit soit's quite possible the clean install was the secret, but try creating a new outgoing COM port against the GPS and see if TT remembers that...
Dox
BigDamHero said:
Hi,
I've trawled the forum and I've followed all the TomTom setup procedures.
Click to expand...
Click to collapse
Which?
There are 2 general ways to set it up, 1 works 100% (i use it so know it does ) 1 i dont use and have never tried so may well work in the reverse direction and be causing you errors.
The way i set up tomtom; pair the BT GPS. Open an OUTGOING port to the BT GPS, set my GPS as OTHER (wired/cable) NEMA device (NOT bluetooth) in TTN5. now my tomtom connects to the bluetooth, not the otherway round. This method has thrown up no errors for me at all.
If you have followed the reg edit/hack to show the GPS page in connections then i dont know how the settings differ and the possible results this could have on connection issues.
Let us know which way you are going
I have the exact problem as BigDamHero. Each time I wanna use TTN, I need to delete the previously paired BT GPS and then pair it again, otherwise the TTN will just say No GPS Device. I use TTN v5.21 and Wizard with Windows Mobile 5. I tried my BT GPS device on my brother's PDA which runs on Windows Mobile 3, and it connects like a gem every time. I am also looking if anyone has solved this issue, cos it is tedious re-pairing every time.
Had the same problem until 5 mins ago! Found an explanation in another thread, but only in Dutch..
Here's how to do it:
Turn on GPS
Activate bluetooth on device, go to BT parameters, delete previous pairing like you're used to
Create new pairing, choose GPS, enter passkey, check Serial port in services, go to COM ports and add outgoing port (e.g. COM6) like you're still used to :roll:
Add an incoming port too (e.g. COM7) <-- Here's the trick!
Set your GPS apps to use COM6 (the outgoing one)... and here you are! This time it will work, you can turn off GPS and device bluetooth, turn on again and it will connect by itself.
If you want a bit more you can activate GPS panel, set program port to COM8 (then you will have to use this in your apps) and COM6 as hardware port.
Everything works fine now!
hey man, wot a coincidence....i also just read that post which had the dutch explanation.....BUT however, it's not working for me.
toneslee said:
hey man, wot a coincidence....i also just read that post which had the dutch explanation.....BUT however, it's not working for me.
Click to expand...
Click to collapse
I did everything in the list except for creating the incoming port and it still works everytime (I know that's no consellation to you). I wonder if something else you've installed, or the way you installed the app is causing the problem? Is it worth a hard reset and trying the entire install on a clean wizard?
Dox
A friend didn't need the incoming port either. I believe it has something to do with the GPS, as he has a different brand than me.
With mine, before adding the incoming port if I started an app without erasing/redoing the pairing before I would get a notification saying "Navman GPS wants to connect" and asking me to pair. It would keep coming every 10 seconds whatever I did.
BigDamHero, what brand / model of GPS is it?
Maybe we can see if anybody here, or over on pocketgpsworld has been able to make the same combination work and if so, what they had to do to get it to fly...
Dox.
well, tomtom was the very first thing I installed when I got my new vario. it was only after I got tomtom fully working (but still need to re-pair everytime), then I installed a couple of simple Card games.
toneslee said:
well, tomtom was the very first thing I installed when I got my new vario. it was only after I got tomtom fully working (but still need to re-pair everytime), then I installed a couple of simple Card games.
Click to expand...
Click to collapse
A quick glance at pocketgps suggests others are having similar issues. There's a thread here that suggests leaving it a while, and I seem to remember other GPS issue threads saying power up the GPS and let it get a fix before starting TTN. A more detailed probe round the forum will probably show more of the same.
Dox
I've just flashed my Qtek 9100 to a new ROM, (the O2 one), and since then I've been getting this same problem. With my previous ROM everything worked fine. I was able to turn of either my PDA or GPS, and they would always auto-reconnect in a few seconds. Looks to me like something broke during one of the ROM changes. Which ROM versions does everyone with/without this problem have?
By the way, I have a BT77 GPS.
Hey sorry for the total lack of reply. Been snowed under with exams.
Ok I tried most of what you guys said but didn`t work. BT ports aren't available to select as hardware ports.
However I have managed to solve it. The key was to pair the GPS, and create an UNENCRYPTED OUTGOING port. That's all. Previously I had encrypted ports outgoing and incoming. My GPS applet in control pannel is set to none so it,s nothing to do with that.
I don't know what my GPS is. Its unbranded. One of the cheap common ones.
Hope this helps some people with the same problem.
Lewis
I searched and didn't find any previous postings regarding an issue with Parrot and Audi Hands Free (Bluetooth) car kits and the TyTn.
This issue is only with the TyTn and the Wizard devices work fine.
It seems to pair fine with the car kits but 5 minutes into usage...the TyTn turns the bluetooth off on the device.
Then about 1 min later, turns Bluetooth on again. The cycle then begins Off and then On ....
Here's a link on the Parrot forum.
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
I've got the same problem with my Seat Leon (new model) bluetooth carkit !!!
I think it's the same module as in the Audi (all VAG related cars).
It's very irritating !
I hope they will fix it soon....
http://forum.xda-developers.com/viewtopic.php?t=58789&highlight=
:wink:
Er... not followed as far as parrot (down for maintennance) BUT
I've found with my Seat Leon kit that the phone needs to remain in a fully powered state - you can't put it into the sleepy state by the power button otherwise you get the intermittent but eventually endless dingling of it connecting and disconnecting.
Best way I've found is to leave it on asking for a password with the cover on.
edit: Should just point out that you also need to turn off any power off settings - except for the backlight.
Pyranwolf said:
Er... not followed as far as parrot (down for maintennance) BUT
I've found with my Seat Leon kit that the phone needs to remain in a fully powered state - you can't put it into the sleepy state by the power button otherwise you get the intermittent but eventually endless dingling of it connecting and disconnecting.
Best way I've found is to leave it on asking for a password with the cover on.
edit: Should just point out that you also need to turn off any power off settings - except for the backlight.
Click to expand...
Click to collapse
I'm going to try this !
I hope that it works.
Thanks anyway.
What kind of Leon do you have ?
I've got an A6 with BT kit and am having this problem. I cannot make/receive a call whilst running my BT GPS device & TomTom, although from reading this the issue may be the Audi kit anyhow.
Are there any fixes available - be it HTC or Audi? Or are there any work-arounds, such as add-on software for the TyTN??
Please help - it is driving me mad. Spoiling what is otherwise a great piece of kit.
I have been having this exact problem with my Audi A4 with Audi Bluetooth.
I did wonder if it was in some way connected with the phone going into sleepy mode as it is being powered by the phone battery.
Also, the bluetooth stops responding after 5-10 minutes, but if I am continously using the phone, it seems to be ok.
Therefore, I think I need to buy an in car charger, and see what happens...
Has anybody else tried this that can confirm it works?
Markee
Just a quick note to Paul_o
My Audi A4 / SPV M3100 / Tom Tom / Bluetooth GPS work fine together.
If I am in Tom Tom, and get an incoming call, the little call window pops up over Tom Tom, Tom Tom carries on and the phone audio is routed through the speakers - the only irritating thing is that the Tom Tom lady keeps interrupting... :wink:
Mark
Hi,
I'm using Vario 2 with Audi Bluetooth and also having the BT ON - BT OFF issues.
These are my findings.
- Without JETWARE software:
- BT goes ON and OFF in the car regardless of the VARIO 2 being on or stand-by, or the phone being battery powered or connected to the car.
- Once a conversation is started the BT connection seems to be remain ON.
- With JETWARE software
- If I leave the screen always on the BT connection stays always ON. Only backlight automatic switch-off is selected
- I have tried several screen toggle programs (which claim that they only power down the screen) but the BT goes OFF in the car after a few minutes.
I'm happy to test any other proposal.
Cheers,
C
What version of JetWare are you running, they have a beta which has settings for the Audi kit, this may help, there is also a registry setting that is meant to change the power settings when bt is connected. An extract from an email conversation with Jetware...
We have also addressed the power issue, but this fix requires a registry change. Please create a DWORD registry value in HKLM\Software\JETware\AGExt named InSessionPower with a value of 0 (valid values are 0-4, with lower values indicating greater power availability). This will tell the OS that the Bluetooth device should stay at full power while it is in a Hands-free session.
Not sure if this will help, my Hermes is ariving on Monday, I'm was hoping that all the problems i've had with my magicain and the audi kit would go away with the Hermes, but maybe not.
Give the key a go and let me know
Hi dh,
thanks for your reply.
I haven't installed the Beta version yet. However I have changed the registry setting and will test first thing tomorrow. If this doesn't fix the problem I will try the Beta version with the Audi setting.
I'll keep you posted.
Cheers,
Carles
Hi dh,
I have tested the two proposals (Change in the registry and the Beta version + Audi settings) without much luck. The BT connection with the car keeps going ON and OFF when the phone is running on battery.
Have you got your Hermes? any luck?
Thanks,
Carles
Got my Hermes (Orange M3100) a couple of days ago. I've installed the JetWare extention, and without the InSessionPower set the connection is dropped. So far with the setting applied it has stayed connected. I have had other problems like not being able to make calls etc, which is a bit of a issue. I need to do some more testing, as i've been messing with the phone a bit.
I'll update here in a couple of days
Must say i'm very disapointed with the phone regarding this. A couple of weeks ago i had a Wizard which worked flawlessly with the JetWare extention, no power issues, calls made and received without a single problem. I wonder what has changed with the bt implementation between the Wizard and the Hermes?
Hi dh,
You will see from my previous postings I have had the same problems too.
It should be noted, though, that the Vario (wizard) worked flawlessly with the Audi A4 Bluetooth without Jetware software.
Has anybody been able to prove there is no problems if the phone (SPVM3100) is powered whilst in the car?
Cheers
Mark
I have a factory fitted hands free system in my Vauxhall. Every other phone you can think of works with it...EXCEPT my XDA mini. It seems to pair up, but there is no signal showing from the carkit. It might work for a minute and then it drops out. Is it the XDA or Vauxhall that's at fault? It seems that nobody knows the answer and I paid serious money for this bit of car kit. I like the phone, it really is annoying. I have tried another XDA mini as well and that doesn't work either. Does anybody else have a Vauxhall with the same built-in system and not connecting?
Markee
I've had the phone plugged in without the registry entry and it seemed to be ok. If I can get to a stage of a working solution i'll test again without the registry entry and with external power.
dh said:
Must say i'm very disapointed with the phone regarding this. A couple of weeks ago i had a Wizard which worked flawlessly with the JetWare extention, no power issues, calls made and received without a single problem. I wonder what has changed with the bt implementation between the Wizard and the Hermes?
Click to expand...
Click to collapse
I'm guessing that since they went from BT1.1 to BT2.0 they had to make a new stack.
My Wizard worked PERFECTLY on my Parrot, my TyTN is almost useless on it.
you make a very good point ScottC, that'll be what it is.
Just driven home and could not make a single call with Jetware installed. Removed it and i could at least make a call, but i didn't get any status info or phone book. I didn't get a chance to leave it connected without Jetware for longer enough to see if it disconnected without external power, i imagine it will. I will test some more later/tomorrow. I'll also send an email to Jetware to see what there thoughts are regarding bt v2.0 and their product
Hello,
I have an Audi A3 with the factory fitted Phone kit but without the Audi Craddle so I'm using the Bluetooth connection.
I have tried the Vario (Wizard/QTEK 9100) and Vario 2 (Hermes/TyTN) and had similar problems with the two of them. Once the connection is stablished I can make and receive calls without problems. The issue is that the BT connection goes ON and OFF without an apparent reason.
The only thing I have seen is that when the Vario is kept on (only the backlight is off) the BT connection normally stays ON, regardless of the phone being powered or not.
I have tried Jetware, the Beta version, the registry entry, programs to switch off the screen...but haven't seen any real difference.
I have bought a bluetooth USB stick and will do some test at home to see if the problem is with the car or the phone.
I called T-mobile and they said it was a faulty phone, but I don't think so.
Keep the postings, we might end up finding a solution
Cheers
C
Try upgrade the BT software. I had the same problem after that i upgraded de Parrot software. Now i have the version 4.16
Hi All,
I have been reading a lot of messages on both 8525 and 8125 trying to isolate the issue and there doesn't seem to be a straight asnwer anywhere and hence I am trying to get the attention of the users here...
I have a pioneer navigation system with a bluetooth built-in. My previous phone (blackberry) and my wife's treo650 both stay connected with car's bluetooth when on call (never a disconnect). But my new 8525 gets disconnected mid-call (usually after 2 to 5mins, but have also seen a disconnect within 1min). That is, it does pair with the car kit and when there is no call going on, the bluetooth connection never dies. This disconnect only happens mid-call, almost all the times.
I have the latest ROM (1,34.502...., radio: 1.16), got the phone about 2 weeks ago from Amazon.com. Called cingular and they say could be faulty phone and I have searched other forums like audi message board where their car kits are also having the same disconnect problem with 8525, so I doubt this is a single phone issue.
I have taken the 'band' hack and forced the phone to be in either GSM or WCDMA mode and in either modes, the phone still exhibits the same problem (there might not be any connection between the two at all, bluetooth with GSM/WCDMA, but thought there might be some weird connection...but not the case thankfully).
I read somewhere about some bluetooth tweaks on 8125, but never found what those were. I need some help here otherwise I am going to return the 8525 and stay away from it. I need the bluetooth to work efficiently.
thanks for all your help
Phal
San Jose, CA
please help
I really need some help, clue or direction on solving or at least isolating this bluetooth issue. I love the 8525 but if I cannot fix this bluetooth mid-call disconnect issue, I will unfortunately have to return, which I don't want.
What headsets the 8525 works fine with (no drops mid-call)? May be that is a starting point.
Please also give me some links to 8125 tweaks that some talked about? pof/other moderators/anyone?
thanks a lot in advance!!
Phal
I have an Motorola H700, and every once in a while it will disconnect, looking at the phone after that, BT is turned off, turn it back on and it works again...
There are problems with the hardware and the API used to access it, good phone, but I don't think it was ready for the market yet when they released it. It is likely to be corrected in the next ROM release, last I heard from Cingular is mid 2007, but by the way things go, prolly around late 07/early 08.
I'm having similar issues with the BT headset I use, which is a Samsung WEP150. It'll drop midcall to the handset. I'll look and BT is turned off.
The only remote correllation I've found is that it seems to occur when I've received a new email or something a la ActiveStink.. And I haven't really been able to confirm that... But I have definitely noticed it happening then though.
my 8525 does this as well with my factory BT in my 05 Acura TL. Kind of frustrating, have not been able to figure it out yet.
Problems w/ Audi BT as well
Same issues with my Audi Q7 BT. I have seen posts in this and other forums blaming the MS bluetooth stack.
My 8525 worked flawlessly with my Garmin NUVI 660, never disconnected or failed to connect automatically. This is frustrating.
8525 Fix
I had the same problem with the 8525 and my Pioneer Avic-Z1 bluetooth kit.
I hacked the registry to force the bluetooth radio to stay ON, rather than going into sleep mode. This seems to have fixed the problem (although with limited testing at this point).
My calls would consistently disconnect with 2-4 minutes. After the hack, I've had 2 45-minute+ conversations with no trouble.
Here's the fix... install a registry editor (like PHMedit), and add a DWORD here:
HKLM\System\CurrentControlSet\Control\Power\State\ Suspend
Add a DWORD called btl1: (note the colon, the colon must be there), with a DWORD value of 2.
Good luck!
My Q7 as well i took the advice of wolfgram and did this to my phone i will let you know how it works it would be a shame to give up this phone but it is really useless if this feature does not work right.
Well this is what i did i did what wolfgram said and it still cut out but not as much so i took the checks off in the advance power mode and never let the phone go to sleep and it works all the time. HTC needs to upgrade thier bluetooth setting not to go to sleep. It must stay active at all times MY phone book and all other info posted into my Q7 with no issues at all and it even sees the bluetooth b4 the MMI system in the car Boots up..
Lance
Resolution I think
I turned off 'Making device discoverable to other devices' and it seems to have solved this problem, I am using the phone with a parrot kit and it kept disconnecting now it works all the time.
Treo 750 doesn't have this problem
Well, hopefully you owners of Hermes have figured out the fix. I had to return it and now got the Treo 750 and can gladly say the problem is not there. The treo 750 has the v1.2, but I guess following the replies here, that possibly Palm fixed the problem by keeping the BT radio on at all times.
In any case, here is the post I wrote in avic411.com forum - if you want to see any follow up responses by other owners..
http://avic411.com/forum/viewtopic.php?p=24170
cheers
Phal
Bluetooth cut out
I am having the problem too with the garmin Nuvi and the Tytn - which is ineresting seeing as how one poster had no problem with the Garmin device. Here is something else that is interesting - I did not have the problem when I had the HTC 1.18 Rom installed. After I flashed the HTC 1.35 Rom, the problem began. I have already tried upgrading my firmware on the Nuvi - that did not help. I also use a Nokia 800 bluetooth headset - and that never cuts out with either ROM. I will try turning off the bluetooth discovery first. If that does not work, will try editing the registry. Keep you posted.
Turning off bluetooth discovery did not work.
Turning Off Bluetooth Did Not Work For Me Either
this worked for me.....
http://forum.xda-developers.com/showthread.php?t=247520&page=10
drains the battery quicker, but no more bluetooth problems.....
Hey guys, has anybody found a solution for the auto turning off of the BT in suspend mode? its gettin really annoying
Hello,
After they have broken into my car i had to buy an new GPS receiver. In that case i bought the new Adapt AD850 receiver but somehow it is not working right!.
First of all i have an second PDA (HTC Touch) and on that one the GPS is working 100% fine without any troubles. Then what happens:
I am able to connect it by bluetooth and create the bluetooth profile (com ports and so on). So that seems to work .... after that i start any program that uses the GPS like TomTom or GPSTuner. It finds the GPS and get an fix and will let me navigate. 30 seconds later or so it will lose the GPS and has no connection for an short while. Again it connects and has an connection and will lose it again after an while. After about 3 lost connections the connections stay's and works fine and will stay working until i stop the program and start the program again.
I think it is not an software problem as 2 different programs have the same problem. Also it seems the GPS is fine as it works 100% on my other PDA. I also have changed the OS of my Wizard. I was running MB6 and that one worked verry fine with my old GPS. After noticing this problem with my new GPS i replaced the rom and it runs TNT last version now. But also then the problem still exists.
Does anyone have any idea what could be happening?
Thanx,
Jerome
Hi,
I've been trying to pair my Legend (updated to HTC Android 2.2) with Holux M-1200 bluetooth GPS receiver but without success, I kept getting "wrong PIN or passkey" error. The strange thing is that I can pair this same Holux M-1200 with Desire and Wildfire (both running HTC Android 2.2) without any problem. Does this means Legend's Android 2.2 is not the same as Desire and Wildfire?
I drive to the neighbor country quite often and since I don't have a data roaming plan and it usually take me a very long time (5~10 minutes) to get a gps location fix without data access.
Is there a work around to get this working? Or even better, is there a way to have a faster gps fix without using data (something like QuickGPS in HTC TD2 running WM?)?
Thanks in advance for any help.
Its better to contact htc customer care and report the issue.
There are many frustrating unsolved bluetooth issues with legend.
For me, its with my blaupunkt bluetooth audio in my car stereo.
It might pair, but many a times the audio isn't routed through the bluetooth even if its paired and connected.
lessirey said:
Its better to contact htc customer care and report the issue.
There are many frustrating unsolved bluetooth issues with legend.
For me, its with my blaupunkt bluetooth audio in my car stereo.
It might pair, but many a times the audio isn't routed through the bluetooth even if its paired and connected.
Click to expand...
Click to collapse
Thanks for your post, I shall report the issue to HTC Customer care.
ykkhern said:
Hi,
I've been trying to pair my Legend (updated to HTC Android 2.2) with Holux M-1200 bluetooth GPS receiver but without success, I kept getting "wrong PIN or passkey" error. The strange thing is that I can pair this same Holux M-1200 with Desire and Wildfire (both running HTC Android 2.2) without any problem. Does this means Legend's Android 2.2 is not the same as Desire and Wildfire?
I drive to the neighbor country quite often and since I don't have a data roaming plan and it usually take me a very long time (5~10 minutes) to get a gps location fix without data access.
Is there a work around to get this working? Or even better, is there a way to have a faster gps fix without using data (something like QuickGPS in HTC TD2 running WM?)?
Thanks in advance for any help.
Click to expand...
Click to collapse
hi, don't know if you ever got this sorted, but I had the exact same issues with a stock legend and a qstarz q818xt gpsr (and I believe the qstarz gpsrs use very similar hardware to the holux ones, if not exactly the same!)
I eventually found that by rooting (not trivial as I had to downgrade) and then flashing CM7 rom onto my legend I was able to get the device to pair easily, it appears to be an issue with the bluetooth stack in the stock rom.
Cheers,
Sam
insanimal said:
hi, don't know if you ever got this sorted, but I had the exact same issues with a stock legend and a qstarz q818xt gpsr (and I believe the qstarz gpsrs use very similar hardware to the holux ones, if not exactly the same!)
I eventually found that by rooting (not trivial as I had to downgrade) and then flashing CM7 rom onto my legend I was able to get the device to pair easily, it appears to be an issue with the bluetooth stack in the stock rom.
Cheers,
Sam
Click to expand...
Click to collapse
Hi Sam,
Thanks for the info. I've decided to stick with stock ROM as I still prefer Sense UI and some Sense's widgets. For the time being, well, just switch on the gps once in a couple of days, that helps......
Cheers,
YK