I've been trying to help a friend flash ROM's to his X. We've installed the paid Bootstrap and Rom Manager. We then utilized the bootstrap utility, and flashed clockworkmod recovery. We then go to the Download rom section of Rom Manager and choose FlyX, it downloads, we then check backup current rom, and wipe data, continue. The phone attempts to boot into clockworkmod but wont. It does the update package part, fails, and then reboots normally. I should also note that when I attempt to boot into clockworkmod recovery via bootstrap it is successful. Could I find the downloaded Rom via the menu in clockworkmod and install it that way? Is there a step in installing Clockworkmod that I'm missing? I've been checking the forums but all I can find for solutions is people saying to install bootstrap again. I've uninstalled and reinstalled both programs twice and nothing has changed. Thanks so much in advance for the help.
open rom manager and click on flash clockworkmod recovery.
everything you download with rom manager goes into the /clockworkmod/download folder on your mem card.
Tried that.didn't work.
Sent from my ADR6300 using XDA App
You need to open up Bootstrap and select the top option... then you can proceed to Rom Manager.......Rom Manager cannot flash CW onto the DroidX that why we need Koush's Droidx Bootstrapper. Give that a try also Note i hope that you have booted into CW and made a Nandroid backup of your friends current phone state.. If that still doesnt work for you.. download the ROM off a forum and do it manually.
mptrh336 said:
I've been trying to help a friend flash ROM's to his X. We've installed the paid Bootstrap and Rom Manager. We then utilized the bootstrap utility, and flashed clockworkmod recovery. We then go to the Download rom section of Rom Manager and choose FlyX, it downloads, we then check backup current rom, and wipe data, continue. The phone attempts to boot into clockworkmod but wont. It does the update package part, fails, and then reboots normally. I should also note that when I attempt to boot into clockworkmod recovery via bootstrap it is successful. Could I find the downloaded Rom via the menu in clockworkmod and install it that way? Is there a step in installing Clockworkmod that I'm missing? I've been checking the forums but all I can find for solutions is people saying to install bootstrap again. I've uninstalled and reinstalled both programs twice and nothing has changed. Thanks so much in advance for the help.
Click to expand...
Click to collapse
YOu need to download Koush bootstrap http://koush.tandtgaming.com//motorola/droidx/DroidXBootstrap.apk
So after I gain root, I open Bootstrap? I then hit the "Bootstrap Recovery" button? Then I open Rom Manager and click "flash the latest ClockworkMod Recovery", which I beleive is 2.5.0.7? Do I hit the "Reboot Recovery" button in Bootstrap after I flash the latest CW recovery?
that will get you into clockwork mod yes.
This helped, thanks everyone
Having the same problem. Im trying this hopefully I can get clockwork recovery to work
Sent from my PC36100 using Tapatalk
I have tried this several times, even re-installing rom manager and boot strap and everytime i reboot it will not go into the rom manager recovery mode. any ideas/and or advice will help
P.S. I have wiped several times and i am running .596
Related
I'm trying to make a nandroid backup so I can mess with my droid 2 but having issues...
The phone is rooted.
Have Installed: Rom Manager and Droid 2 Bootstrapper - both 'green' in superuser permissions.
When I try to boot into recovery mode using Rom Manager (trying to make a backup) or the D2 Bootstrapper the phone just boots up as it normally would. I can get into the default recovery mode by using the 'X' and 'PWR' key combo but that's not what I need.
Have tried renaming these files as suggested here in another thread and reflashing clockworkmod but that didn't work.
EDIT: can't link so these are the two files:
/system/etc/install-recovery.sh
/system/recovery-from-boot.p
Any ideas?
Meh... nvm - I figured it out.
Help!
Hey, my friend has the SAME EXACT issue. what did you do to fix it?
Everyone says to reinstall clockwork, but that doesn't fix it.
sonok said:
Hey, my friend has the SAME EXACT issue. what did you do to fix it?
Everyone says to reinstall clockwork, but that doesn't fix it.
Click to expand...
Click to collapse
I've never used ROM manager because koush's D2 bootstrap does everything you need. But if you don't get clockwork from the application make sure you are properly rooted and you press "bootstrap recovery" and get the "success" box before you press "reboot recovery".
newk8600 said:
I've never used ROM manager because koush's D2 bootstrap does everything you need. But if you don't get clockwork from the application make sure you are properly rooted and you press "bootstrap recovery" and get the "success" box before you press "reboot recovery".
Click to expand...
Click to collapse
My friend is using Rom manager. He installed CWM via rom manager. Do you think it is safe for him to get "Koush's D2 bootstrap" and re-install CWM that way? Will that break anything?
PS: I use Amon_Ra's recovery on my nexus one. I do all my installations via ADB but he is not comfortable using ADB. I'm just trying to get him into a stable custom recovery because ever since he installed clockwork (which is not working) he says the phone is really slow.
sonok said:
My friend is using Rom manager. He installed CWM via rom manager. Do you think it is safe for him to get "Koush's D2 bootstrap" and re-install CWM that way? Will that break anything?
PS: I use Amon_Ra's recovery on my nexus one. I do all my installations via ADB but he is not comfortable using ADB. I'm just trying to get him into a stable custom recovery because ever since he installed clockwork (which is not working) he says the phone is really slow.
Click to expand...
Click to collapse
I don't know installing koush's bootstrap will do but the D2 has to be bootstrapped because it's locked down and normal Clockwork Mod won't work because of it. If it doesn't work and his phone isn't working he can just SBF with the 2.3.2 version (he probably has the update already) he can do it in linux or windows (linux is easier) and it will put him back to stock so he can install koush's bootstrap from the market after re-rooting it.
If he want's he can back up his contacts and applications with google and data with titanium backup.
You can PM me if you have any questions about the process.
Here's my tool for flashing sbf's in linux on any computer. It's got a lot of useful info about flashing and problems at the bottom read it even if you flash in windows.
Searched, but couldn't find an answer to this. I rooted and installed ROM Manager so I can do a nandroid backup before installing a custom ROM. However, when I press back up in ROM Manager, it restarts and hangs/freezes on the HTC MyTouch 4g splash screen.
What am I doing wrong?
Have you flashed CWM recovery after installing Rom Manager. You must flash the recovery before you can backup/restore or install roms. I almost did that myself but luckily i read the thread concerning it again and flashed REcovery before trying to back up rom.
Yeah, I did that first and the problem remains. I just uninstalled and reinstalled ROM Manager and am about to try "backup current rom" again (unless I should reboot into recovery and back up from clockwork recovery?).
FWIW; Current recovery is ClockworkMod 2.5.1.2
anyone?
Did you ever find a solution to this problem? I just started getting exactly the same. Cant reboot manually into clockwork recovery or from Rom manager :/
If you have flashed a recovery beyond that supported by ROM manager, you will not be able to perform recovery functions from the app (i.e. backup). CW3 is required for CM7 ROMs, but will not be supported by ROM manager until the CM7 RC drops. You can still manually boot to recovery (I always Vol up when powering then select Recovery) and if you have CM7 nightly installed, it has a "reboot to recovery" option in the reboot menu.
You need CWM3 to use CM7.
neronian said:
anyone?
Click to expand...
Click to collapse
Sometimes it is necessary to flash clockwork recovery more than once before it will actually stick. Also, occasionally it will freeze on the splashscreen after a backup, but a battery pull and turning out the phone should be fine.
Sent from my HTC Glacier using XDA App
Here's what's going on:
The Clockworkmod Recovery that you can download from the Market only supports up to CyanogenMod 6.x. For CM7, you need to install Clockworkmod Recovery 3.x, but that version isn't available on the Market yet.
What this means is that you need to find the image file for a CWR 3.x on these forums and manually install it through either a terminal emulator or fastboot. The post below explains how to do it:
http://forum.xda-developers.com/showpost.php?p=10862819&postcount=3
If you flash CM7 using CWR 2.x, your phone won't boot. There's just no way around it.
hammondnav said:
Here's what's going on:
The Clockworkmod Recovery that you can download from the Market only supports up to CyanogenMod 6.x. For CM7, you need to install Clockworkmod Recovery 3.x, but that version isn't available on the Market yet.
What this means is that you need to find the image file for a CWR 3.x on these forums and manually install it through either a terminal emulator or fastboot. The post below explains how to do it:
http://forum.xda-developers.com/showpost.php?p=10862819&postcount=3
If you flash CM7 using CWR 2.x, your phone won't boot. There's just no way around it.
Click to expand...
Click to collapse
Careful with the terminology there. ROM Manager, the app you download from the Market, is a GUI front-end to the CWM recovery image, but you can download and install CWM without using ROM Manager at all. Just because you have ROM Manager installed doesn't mean that CWM recovery is also successfully installed.
TeeJay3800 said:
Careful with the terminology there. ROM Manager, the app you download from the Market, is a GUI front-end to the CWM recovery image, but you can download and install CWM without using ROM Manager at all. Just because you have ROM Manager installed doesn't mean that CWM recovery is also successfully installed.
Click to expand...
Click to collapse
Thanks for pointing that out. I didn't imply that CW ROM Manager and CW Recovery are the same thing though...
hammondnav said:
Thanks for pointing that out. I didn't imply that CW ROM Manager and CW Recovery are the same thing though...
Click to expand...
Click to collapse
You said "the Clockworkmod Recovery that you can download from the Market", and that kinda does. No biggie though.
Just an update for my problem, it turned out that clockwork recovery had corrupted for whatever reason and couldn't be reinstalled from rom manager. As I wanted to test Cm7 anyways I just ended up flashing clockwork recovery 3 manually through fastboot and its all gravy again
Sent from my Desire HD using XDA App
How to flash clockwork recovery from fastboot or fron clockwork recovery 2.51?
Sent from my SGH-T959 using XDA App
Thanks, everyone. What happened with mine, I have no idea, but I randomly opened rom manager and was greeted with an update to the recovery. So I downloaded it and voila - I can now boot into recovery and do backups, etc...
I am having a problem accessing clockwork mod recovery mode, no matter what process i try it consistently takes me to android recovery instead.
info:
samsung fascinate
rooted
Did odin flash back to stock
Did factory reset back to stock
Did software ota update to the following specs:
HV i500.04
M# sc i500
Firmware 2.1 update 1
Baseband S: 1500.04VD101
Kernel 2.6.29
Build SCH i500 DH101
Installed CWm Recovery from market
Installed Asto file manager from market
Installed Titanium backup from market
Opened CWM application
Went through root permissions dialogue
Flashed CWM recovery to 2.5.1.0
Next i clicked on BACK UP ROM which reboots me into Android Recovery Mode and gives me the standard 4 options for the fascinate:, plus it says installation was aborted:
1.After failing to find update package
2. open update package
3. verify update package
At this point i click on the home button and reboot system now.
Next i try flashing a different CWM Recovery version to 2.5.1.1 , 2.5.1.3 , 2.5.1.4 , all resulting in and error message, so i am still using 2.5.1.0
Next i try toclick on manage and restore backups but there are no backups listed even thouigh i did back up Rom earlier.
next i try to install the Geeknik ROM( Stupidfast v1.23(D101) from the Download ROM section.
I click OK to dialogue box that ask do i want to Down Load Rom
The Stupidfast ROM download starts and finishes
Notification bar says download is complete so i click on notification bar and this takes me to dialogue box which asks do i want to back up existing rom and wipe data and cache . i say yes to both and click OK.
Next dialogue box asks do i want tot reboot. i click Ok
i am then taken back to Android System recovery.
No matter what i do in Clockwork Recovery i always end up back at Anroid System Recovery. i have tried all different scenarios -debugging checked.debugging unchecked,clear cache, dont clear cache, back up rom,dont back up rom, usb connected, usb unconnected, Titanium in,titanium out. watched all different you tube videos on subject.
sorry this was so long. i didnt want to miss any answers to any question any of you might have if at this point you want to offer any help. thanks in advance.
You have to flash CWM with Odin before you can use it. Can't just install from the market or ROM Manager
Kevin, Thanks for your response to my question.
i thought i already flashed CWMRecovery from within ROM Manager. it is the first option at the top of CWMRecovery, also it states under that first choice that my latest recovery id Clockwork Mod 2.5.1.0.
If i scroll down to the bottom of CWMRecovery the last choice shows all of the CWM Recoveries. Recovery 2.5.1.0 is listed at the bottom and is the only one i can flash/install.
In both instances it says that i have flashed this version(2.5.1.0) of CWM Recovery.
I will try whhat you are suggesting and thanks again for the help, it is appreciated
Kevin , I followed your instructions and flashed the CWMrecovery.tar file with Odin3_1.3 and everything is as it should be. The funny thing is (at least to me) that the CWMrecovery version that is listed when i am in recovery mode now is CWM version 2.5.1.0, which is the same version that i flashed within rom manager. Kind of confusing but at least i am where i want to be. Thanks again for the help.
Yeah, it's just one of the quirks with the Fascinate. Unlike most devices, just flashing Clockwork with ROM Manager only puts the update.zip on your SD card. Using Odin to flash the .tar file installs the recovery, so both parts are needed.
where i need to put CWMrecovery.tar in ODIN in which section PDA/PHONE/CSC? 1nx
You only flash things in PDA section, doing otherwise will screw up your phone
Sent from my Fascinate - DJ05/SuperClean/Adryn's 12/30
?
Im kinda new to all this stuff and just wanted to get some step by step stuff if you dont mind. I rooted my Fascinate tried clockwork mod wouldnt work when i tried to backup after downloading the recovery thing and when i read this you guys said something about Odin so I went to appbrain and downloaded tuxility but now im lost on what to do. Maybe something step-by-step would be good. Really appreciate it! (ps: I know im kinda slow but if you wouldnt mind...)
The stock recovery does not allow us to run unsigned zips. Thus, we must flash the CWMrecovery.tar to patch recovery to allow us to run these unsigned zips. Then you can flash CWM from within Rom Manager.
Follow these instructions from fallingup's thread:
http://forum.xda-developers.com/showthread.php?t=788099
THANKS
Thanks ALOT this looks really simple the only thing that idk about is how it said to put it in download mode. Idk what that means. Debugging? and do I mount it? Thats all i think. THANKS agian.
Download mode: power off, pull out battery, with Odin open and USB connected to PC hold volume down and plug in USB.
I rooted my Droid 2 with Z4Root. I have ROM Manager Premium. I was able to create backup of current ROM. If I try to install a ROM from the SD card with ClockworkMod phone reboots back to normal screen, and stays Android 2.2. If I manually reboot into recovery the ROM install shows signature error. Recovery screen shows 4 options, not the 8 I've seen displayed in instructions on the web.
I'm not sure exactly how ROM manager is supposed to do it, but I wouldn't bother using it just yet.
Get the Koush's Droid 2 Boostrapper. Install it.
Open the program and hit Bootstrap recovery, tell superuser yes, then wait for the success message. After that, click on reboot recovery, and you should boot into ClockworkMod, where you can install a different ROM.
Hi guys,
I need help! I messed up my phone
I tried installing Cyanogen mod as advised here:
http://forum.xda-developers.com/showthread.php?t=1338183
and it seemed to work fine and booted into the mod. However, I then noticed that I did not have any Google apps (I thought they would be there), so I checked the thread on XDA that said that you needed to flash those too. So when I tried to do that, by using Bootstrap recovery and rebooting, my phone is now stuck booting with the red "M". Nothing else happens.
I have tried booting into recovery, but only stock recovery is available. I have tried wiping data/cache, it did not work. I have tried renaming the mod to update.zip and applying that, but it says "signature verification failed".
Please, please help! What can I do?
PS: I did try posting in the relevant thread, but the forum will not let me post in the development section.
Thanks a million!
Do this = http://forum.xda-developers.com/showthread.php?t=1032372
o/
Thanks so much for your reply. Not sure which SBF file to choose? I am in the UK. Thanks!
I'm not sure.. but I think "2.2.2 Service Version" -> UK
Negruslito said:
Do this = http://forum.xda-developers.com/showthread.php?t=1032372
o/
Click to expand...
Click to collapse
Thanks so much! That guide was very useful, with a few modifications:
Phone needs to be UNPLUGGED first, then powered on like this: camera + volume down + power. Then connect USB cable. You also need Motorola drivers and the latest version of RSD that MUST be run as admin. The SBF file MUST be in the RSD application folder. Then it worked! Phew!
A million, million thanks!
Lisali said:
Thanks so much! That guide was very useful, with a few modifications:
Phone needs to be UNPLUGGED first, then powered on line this: camera + volume down + power. Then connect USB cable. You also need Motorola drivers and the latest version of RSD that MUST be run as admin. The SBF file MUST be in the RSD application folder. Then it worked! Phew!
A million, million thanks!
Click to expand...
Click to collapse
Do not use bootstrap with any custom.. will brick your phone
Instead turn your phone on.. when 2nd M logo appears the led light will turn on (blue).. just press VOL-.. then go to Recovery, Latest Recovery.. this time use vol +- to navigate and power button to choose
Sorry about my poor English..
Hi there
Thanks so much for your reply.
But it says here to use bootstrap to install Cyanogen mod? Don't you have to use that?
http://forum.xda-developers.com/showthread.php?t=1338183
Thanks! Oh - and your English is great!
You have to use bootstrap, when you are on stock and want to custom rom. Without bootstrap, you can't install custom rom
After installing bootstrap, it's recommended to install newer CWM by installing http://forum.xda-developers.com/showthread.php?t=1196590 from current CWM from bootstrap... And after that you can finally install custom ROM from updated CWM 3.1.
And AFTER installing custom rom, THEN you should NOT install bootstrap. You should not install bootstrap from custom rom Hope it's clear now.
tl;dr: you MUST install bootstrap, to go into custom rom; you should not install bootstrap when/after you are actually on custom rom*
* (because custom rom has own 2nd init etc. and by installing bootstrap you would destroy it and cause brick (not permanent of course)
Anonymous_ said:
You have to use bootstrap, when you are on stock and want to custom rom. Without bootstrap, you can't install custom rom
...
And AFTER installing custom rom, THEN you should NOT install bootstrap. You should not install bootstrap from custom rom Hope it's clear now.
tl;dr: you MUST install bootstrap, to go into custom rom; you should not install bootstrap when/after you are actually on custom rom*
* (because custom rom has own 2nd init etc. and by installing bootstrap you would destroy it and cause brick (not permanent of course)
Click to expand...
Click to collapse
Thanks SO much for that, it makes sense now!
So once I have installed Cyanogen, and an update for it is released, how do I flash that? And will that delete all my data & apps?
Thanks!
Lisali said:
Thanks SO much for that, it makes sense now!
So once I have installed Cyanogen, and an update for it is released, how do I flash that? And will that delete all my data & apps?
Thanks!
Click to expand...
Click to collapse
Once you have CM installed, then when update is released, you simply go into recovery (hold power and select reboot, then recovery, then it will reboot into bootmenu, where you are supposed to choose boot, then recovery and then latest), where you find option named "install zip from sdcard". So you choose this option, then select zip file with update on your sd card and after success installation, select wipe cache and advanced wipe dalvik cache, then reboot and it should boot ok, with your apps and other data - but I always recommend to backup via titanium backup, before flashing any update, because if you meet any error, you have to wipe also data from recovery... and you lose your data and apps after data wipe
Anonymous_ said:
Once you have CM installed, then when update is released, you simply go into recovery (hold power and select reboot, then recovery, then it will reboot into bootmenu, where you are supposed to choose boot, then recovery and then latest), where you find option named "install zip from sdcard". So you choose this option, then select zip file with update on your sd card and after success installation, select wipe cache and advanced wipe dalvik cache, then reboot and it should boot ok, with your apps and other data - but I always recommend to backup via titanium backup, before flashing any update, because if you meet any error, you have to wipe also data from recovery... and you lose your data and apps after data wipe
Click to expand...
Click to collapse
Thanks so much for your thorough explanation! This should be added to the main threat sticky. You're a star!