Has anybody tried this? having Lynx accessible via adb shell would be - imo - very handy. For example, my work terminal has no internet access, but I can install the USB driver for my Galaxy S and access the shell that way.
Of course, since I'm not allowed to play with my phone while working, it would be very nifty to open up a cmd window and just type "adb shell lynx" and have at it if I need to.
Has anybody tried this? I'm no coder by any stretch of the imagination, otherwise I'd be having a go at it now..
EDIT: I can't post to XDA due to the fact that i just signed up for an account, but look at fards' copy of my post to see how to install Ubuntu on your Dell Streak
Here's Pats Post on modaco;
although it would be nicer to keep development discussion to just one thread, the more constructive input the better
Hello All,
I'm attempting to natively port Ubuntu and/or Debian to the Streak. With it being such a powerful device there really is no reason it SHOULDN'T be running a “desktop” operating system. However, implementing his is quite a difficult task, so if any and everyone's help would be very much appreciated.
In the mean time, this is my first guide on how to get ubuntu running piggyback on the Dell Streak. After quite a while (and numerous different trials), I have found that this is the easiest way to get Ubuntu Mobile up and running fast. All commands can be done through either ADB shell or the terminal emulator on the phone.
This was *NOT* done entirely by me, but is a culmination of the effort of lots of people in the android community. I just modified it so that it would work on the Streak.
**This Installation DOES NOT install Linux natively, and as such is should not be destructive to your Android system, however i take absolutely no responsibility for anything that happens and you do this COMPLETELY at your own risk**
Here is how to do it:
1) Root your phone. There are plenty of guides on how to do it, so find one and get root access on your phone.
**YOUR PHONE MUST BE ROOTED. THIS WILL NOT WORK WITHOUT IT.**
2) Download Ubuntu Mobile Bundle: http://uploading.com/files/bbm6b311/ubuntu.zip/
This contains an image of the filesystem as well as other necessary scripts to get it working.
2) Busybox - Install Titanium Backup from Android Market - if you press the "Problems" button it will install Busybox on your phone for you (Feel free to uninstall Titanium after this is done). This is the fastest and most pain free way to install busybox on the streak that i know of for now (the other ways of doing this ARE NOT fun...)
3) On your SD card's root directory, create a folder called ubuntu and extract all files in the ubuntu mobile bundle there.
4) Replace the bootubuntu executeable file in the ubuntu directory with mine, found here http://www.mediafire.com/?fi011w4fbmymw3y
5) Unmount phone from computer. ADB and Android Terminal will not work if the phone is mounted.
5) Download a terminal from the Android Market - I used Jack Palevich's Android Terminal Emulator (android market search: terminal) but anything similar should work the same
CODE
Code:
su
cd /sdcard/ubuntu
sh ubuntu.sh
6) Ignore any errors thrown up by ubuntu.sh. From this point, all that is needed to boot ubuntu is just to enter this:
CODE
Code:
bootubuntu
To start ubuntu from now on, this is all you need to do.
You should now have ubuntu working on your laptop, and while it DOES connect to your phone's internet sources, it DOES NOT yet have a graphical interface.
Here is how to add one:
1) Update the system with the following commands in ubuntu:
CODE
Code:
apt-get update
apt-get upgrade
The first one updates the package lists, the second one downloads updates to the system itself.
2) Install TightVNC in ubuntu:
CODE
Code:
apt-get install tightvncserver
3) Configure TightVNC:
CODE
Code:
export USER=root
vncserver -geometry 800x480
For security purposes, it is recommended that you assign a password to your VNC server when asked.
4) Download Android VNC Viewer from the market
5) Configure Android VNC Viewer:
Change the port to 5901 and type in your password that you entered before.
Other Problems
There appears to be a bug with the X window server sometimes refusing to connect to VNC. DO NOT change any settings on Android VNC Viewer, instead open a terminal and run the folloring command:
CODE
Code:
rm -R /tmp/.X11-unix
What Does Not Work – Will Try To Fix
Keyboard from Android VNC Viewer
Shutdown – Does Nothing
Reboot
Log Out
Native Install
I hope you guys enjoy this, and I can't wait to get your feedback.
- Pat
Click to expand...
Click to collapse
there was a thread about this but it wasnt work on me. now i am downloading and i will inform you again
what is the address for vnc ?
OMG! Could that be any slower on the download?
EDIT:
That sounded totally ungrateful - sorry!
Thank you very much for this
yeah works fine without problems.
it is better from g1 but not as well as a netbook. so only experimental use i think
I connected to the loopback 127.0.0.1 on 5901 and it worked - haven't seen how to connect to it remotely though
Edit:
Reading is fundamental - I can connect to it form another machine
now to fix the keyboard issue
in terminal emulator there is a note : localhost:1 vnc could work properly so i connect with only port and password.
is it possible to install jolicloud since its an ubuntu based system?
Newbie questions, sorry....
Before to try this port, just some maybe stupid questions for you:
- Still working the phone function?
- Is it easy to go back to standard or Steve Streaks Roms?
- Are there lack of drivers for bluetooth, gps, audio, wifi, etc?
Thanks.
No your missing the point here, this isn't an OS separate to android. Think of this as an app it runs on top of the android system. Also this is very experimental most features would be limited and no ubuntu can't be used as an smartphone os -No phone...
beginner said:
Before to try this port, just some maybe stupid questions for you:
- Still working the phone function?
- Is it easy to go back to standard or Steve Streaks Roms?
- Are there lack of drivers for bluetooth, gps, audio, wifi, etc?
Thanks.
Click to expand...
Click to collapse
1) Ubuntu does not replace android, and the UI only runs in a VNC server, so you can switch back and forth between ubuntu and the phone app (or angry birds?)
2) I installed mine on top of DJ Steve's 1.8.1 rom... It's not native, so it only runs on top of android instead of replacing it
3) Haven't tried audio yet, but it should work (let me know how it goes)... internet connectivity works and provided you have an internet connection enabled in android you can use tools like APT or Firefox in ubuntu... only problem is keyboard is a bit wonky...
For those who had trouble figuring out how to set up the VNC, here is a picture of my VNC configuration on my phone. If you find out the phone's IP address you should even be able to VNC into it from your computer (if your on the same wifi network)
Also, openoffice.org
- pat
Is anyone actively attempting to get Ubuntu running native?
audio not working
keyboard not working
also lots of lags.
ear0wax said:
Is anyone actively attempting to get Ubuntu running native?
Click to expand...
Click to collapse
Yes, i'm looking into it, but it's quite an uphill battle in order to get it working. I'll let everyone know when we make some progress.
www.cepdukkani.net said:
audio not working
keyboard not working
also lots of lags.
Click to expand...
Click to collapse
cause you are running 2 operating systems at the same time
But seriously, if ubuntu can run native (no android in the background) then the lag would be gone, and (if set up right) audio and keyboard would work.
- pat
could i recieve phone and uses sms?
Getting error
Hi all after passing command for booting ubuntu I get a error chroot can't find /bin/bash folder or directory missing
Sent from my Dell Streak using XDA Premium App
www.cepdukkani.net said:
audio not working
Click to expand...
Click to collapse
Im wondering if I install a rdp server instead of vnc if I can get remote audio working.
Ill post with whatever results i get once I'm done waiting 2 hours for the ubuntu image to download.
As for lag. I had a n900 running @600mhz and was doing a chroot into ubuntu and it ran fine, but it used xpyher not vnc. Is there any embedded X servers for android yet? (I highly doubt it)
data requirement for updating GUI pkg of Ubuntu
Can any body tell me size of the data required to update to gui ......as i m not using wi -fi i hv to stick on gsm data usage which is limited in my plan
Very cool!
I had lots of trouble rooting my 2.2.2, but finally got it done by running Gingerbreak twice in a row on a cleanly re-started Streak.
Thanks for a fun gig!
Hello All
I was able to successefuly install Ipython(jupyter) on my nexus(2013) and wanted to share the procedure with all that could be interested.
You could learn and read about Ipython[Jupyter] here
CAUTION:
> To the best of my knowledge this is the first tutorial of it's kind.
> I strongly recomend that you try this on a fresh rom. Use MultiROM for instance
> This was tried on Nexus 7(2013) with android 4.4.4. But I see no reason why it shouldn't work on lolipop 5.0 or on another android tablet. [You could try at your own risk and report your findings]
> Allow minimum 4Gb free space. I used rougthly 2.2 Gb, but i installed more than just ipython
> Hackers Keyboard is VERY HANDY if not NECESSARY
> I apologize for typos and gramar mistakes in advance
> Some of the following steps take time (a long time). Just make sure your tablet is connected to the charge and chose to keep the screan ON while it's on charge
> I am UNLOCKED and ROOTED. I can't tell whether it is required. If it is it would have to be with the prerequired apps. YOU WANNA VERIFY THAT before anything
> MOST IMPORTANTLY, DO THIS AT YOUR OWN RISK. I'm NOT RESPONSIBLE for any INCONVENIANCE whatsoever.
Procedure:
1-: Install GNURoot WheezyX . I am more confortable with debian, tryFedora or Gentoo ... If you know what you are doing.
2- Install GNURoot
3- Open GNURoot
4- Chose wheezyx (or fedora or gentoo ... depending on the distro you like) in the "Select Rootfs to Create " drop-down menu.
5- Click on 'Create New Rootfs' button
6- Chose wheezyx(or fedora or gentoo ... depending on the distro you chose) in the "Select Rootfs to Launch " drop-down menu
7- Check 'Lauch as Facke Root' box. This will give us root privilege
8- Click on 'Lauch Rootfs' button
At this point you shoud have 'Terminal Emulator" open up a window with '[email protected]:/# ' and a prompt ready to take instrucktions
Welcome to linux !!!
Now we need to install "python" and "pip", but before that we need to install 'build-essentials' which will make 'gcc' and all tools required to build a package available on our linux platform:
In the following: if you chose wheezy distro it's the same procedure; if you chose fedora distro replace apt-get with yum; if you chose gentoo you are on your own because I'm not familiar with it
Anyways I assume no responsability anyhow whatsoever.
9 - At the prompt type 'apt-get update' and press Enter
10 - Type 'apt-get upgrade' and press Enter'
11 - Type 'apt-get install build-essential' and press Enter' : This will install "build essential"
12- - Type 'apt-get install python' and press Enter' : This will install "python". I got the version 2.7.3 . You could find the version you installed by typing "python -V" and pressing Enter
13 - Type 'apt-get install python-pip' and press Enter' : This will install "pip", the python package manger
At this point we have python setup in the linux environement. Let's finally install ipython:
14-a Type 'pip install ipython' and press Enter if all you want is the ipython interpreter
15-a Type 'pip install ipython --upgrade' and press Enter to make sure you got the latest version
or
14-b Type 'pip install ipython[all] ' and press Enter if you want ipython and all the goodies like notebook
15-b Type 'pip install ipython [all]--upgrade' and press Enter to make sure you got the latest version
I do scientific work with ipython, so if you are on the same boat as me you could install scientific packages numpy,sympy,pandas,nose,.... with:
"apt-get install python-numpy python-scipy python-matplotlib ipython ipython-notebook python-pandas python-sympy python-nose" !!! This is a lot about 1.2Gb !!!
At this point everything is set up. "when the wine is drawn, we now just have to drink it"
16-a Type ' ipython ' and press Enter to run ipython interpreter
or
16-b Type ' ipython notebook' and press Enter to run ipython notwbook. If you get an error message say that ''no web browser could be found" ignore it. look for the server address (looks like http://localhost:8888)
17-b Enter that adress (http://localhost:8888 in my case) in Chrome (I had no problem with chrom so far, but you could try on your favorite web browser) press Enter. Et voila you should be in the ipython notebook tree
I have been here for a couple of years, and never got to share anything.
This is my first thread, and i hope it is the beging of a very long series of contributions
> I will upload screenshots later to better guide noobs (I was one onece)
> PM me if you like to donate. I would appreciate it
> Please support the GNURoot developpers, or ipython[Jupyter] developpers if you can. They are all doing a terrific work. (I'm in no way associated to them, but love and support their work)
> I'm not very good at making videos, but I welcome any initiative.
You now Know how to install ipython, I trus you could be very creative since you now got linux at your finger tip :laugh:
Help to use pandas + matplotlib: no $DISPLAY environment variable
First of all thank you for this pretty cool tutorial
i did it and everything else works after all that huge pip installation!
my problem is that i need to see the result of my codes which sometimes is to show me plots of my data using the library matplotlib.pyplot
when i do that i get the following error:
TclError: no display name and no $DISPLAY environment variable
i found someone with the same problem in another situation (not on android but something like trying to save the plots in a pdf) and the problem was solved doing the import like this:
import matplotlib
matplotlib.use('Agg')
import matplotlib.pyplot as plt
plt.plot([1,2,3])
plt.show()
By using matplotlib.use('Agg'), python knows to use the non-interactive back-end Agg instead of trying to display to the screen
this means that i don't have anymore the error but the plot won't be shown either
this happens not only when i do python file.py from command line but also when i run the same codes on jupyter notebook
so is there a way to execute file.py so they do what ever pandas want to do in this android environment (especially pop up windows with my plots when I execute the files)?
if there is no way how do i get rid of android to install some better OS on my tablet that can do all this kind of stuff?
thank you but all of this that you have done it's really not that useful if i cant see my plots
let me know!
paolotamag said:
First of all thank you for this pretty cool tutorial
i did it and everything else works after all that huge pip installation!
my problem is that i need to see the result of my codes which sometimes is to show me plots of my data using the library matplotlib.pyplot
when i do that i get the following error:
TclError: no display name and no $DISPLAY environment variable
i found someone with the same problem in another situation (not on android but something like trying to save the plots in a pdf) and the problem was solved doing the import like this:
import matplotlib
matplotlib.use('Agg')
import matplotlib.pyplot as plt
plt.plot([1,2,3])
plt.show()
By using matplotlib.use('Agg'), python knows to use the non-interactive back-end Agg instead of trying to display to the screen
this means that i don't have anymore the error but the plot won't be shown either
this happens not only when i do python file.py from command line but also when i run the same codes on jupyter notebook
so is there a way to execute file.py so they do what ever pandas want to do in this android environment (especially pop up windows with my plots when I execute the files)?
if there is no way how do i get rid of android to install some better OS on my tablet that can do all this kind of stuff?
thank you but all of this that you have done it's really not that useful if i cant see my plots
let me know!
Click to expand...
Click to collapse
You should know that the linux running GNURoot doesn't have an X-session. You kinda need x11 installed on it to be able to have windows popping up and showing your plots. I remember trying apt-get install x11 without success on "Wheesy". Now, I know there is the "wheesy X" distro of GNURoot, but I don't know whether the X stands for X-session capability; I suggest you try that. (I no longer have my nexus7 to try, but it would be nice to see what happens).
I was able to go around this problem by working on the notebook. I could see my plots fine. I remember firefox beeing the best browser to work on the notebook.
Plots at least on jupyter and transfer files
hey so i found this : (i dont have authorization to post links normally)
stackoverflow .com / questions / 18353203 / using-python-and-matplotlib-on-android
where someone is stating is a big deal to have plotlib working on android
jupyter notebook is not displaying plots not even on firefox, it always give the "TclError: no display name and no $DISPLAY environment variable". It would be awesome if you'd give me a straight solution so i can see plots on jupyter! that would be more than enough to follow lessons in class
the temporary solution i found for now is to remote control my pc at home from the tablet to do all the coding but i cannot work without connection this way
i also found out about this website Wakari but they are saying now there isn't anymore free space for new subscription..
the best solution would be to have plots displaying on jupyter with your help
so the plan for now is to stick to let the pc at home do all the work and remote control it with the samsung remote pc app or to find a good website to log in from the tablet and write codes on browser
ill still use this command line of yours when ever i can thou, when ever there is nothing to display i guess.. but how do I find the folders so i can move to the desktop computer the .py files or the notebook files i create? i was expecting to find the files when i was connecting the tablet with usb wire.. is there anyway to transfer those files?
thank you
izzox said:
You should know that the linux running GNURoot doesn't have an X-session. You kinda need x11 installed on it to be able to have windows popping up and showing your plots. I remember trying apt-get install x11 without success on "Wheesy". Now, I know there is the "wheesy X" distro of GNURoot, but I don't know whether the X stands for X-session capability; I suggest you try that. (I no longer have my nexus7 to try, but it would be nice to see what happens).
I was able to go around this problem by working on the notebook. I could see my plots fine. I remember firefox beeing the best browser to work on the notebook.
Click to expand...
Click to collapse
Use:
%matplotlibe inline
Instead of:
matplotlib.use('Agg')
Basically I have a moto 360 1st gen. Which hasn't received 2.0 update. So I'm not sure how to check if my apps are on Android wear store?
Is there anyway to check or can anyone help?
You might still search for them by name, if not on your phone or tablet then from your desktop (navigate to https://play.google.com/store). Check under the wear category.
Open the wear 2.0 emulator in android studio and connect the emulator to a phone with adb*. Then you can go to the playstore on the emulator.
*run the following command to get the adb connection working: adb forward tcp:5601 tcp:5601
-Snip-
Hi, I have a rooted Hauwei U8800 running 2.3.5 with SSH Droid installed. I've connected from my Linux terminal over SSH and would like to issue commands, or run a script to have the device take pictures over a SSH session.
What options are available for me to do this? Easier is preferable
Thanks.