Related
on on htc touch hd go to start >setting>system
you then have the encryption tool that says when you activate it
"encrypted files can only be read on this device "
so may be a daft question but when i have this activated can i connect my phone via active sync or as disk drive and still see the files and open them and my memory card ?
what im trying to get at is if anyone found my phone they can read the files as they have the phone. what has been encrypted ?
thanks
I'd say no
I'd also say reflash with another rom and you can't read it ever again
even hardreset the phone and you can never read it again
it's made to make sure you're most secret stuff never gets out if you're phone
is stolen not to make sure your stuff will ever be something you can retrieve if something goes wrong
are you saying that you think the encryption is not working ?
No. That's not what he's saying. He's just advising that you not use it. The encryption key is stored on your phone's memory, so that if you ever hard-reset or flash another ROM, the encryption key will be lost and you won't be able to access the data on your memory card, ever again. You would have to do a full format of the card to even be able to use it again.
thanks for clearing that up .
could you recommend any software that i can install on the phone that requires
password to access the memory card while still in the phone and require password if memory card was taken out of phone and put into a pc memory card reader
thanks
I don't really know of anything that would be compatible across multiple systems/platforms like that
I just googled this and found the following software:
http://www.aikosolutions.com/encryption/secubox-encryption-vs-windows-mobile-encryption/
Just some thoguhts for using the native encryption...
I wonder if the encrytion key can be extracted from the phone...?
That way it could be added again on another ROM. Also, the key could then be used in a desktop application that implements the same algorithm (AES, I think). This would allow the card's contents to be accessed outside of the phone.
Hi at all,
everytime I put files on the sd card, I have to reboot Android because without ES File Explorer won't show the new files I put on the memory card.
Even "Refresh" in ES File Explorer doesn't helo. Is there any other way?
Thanks!
Wifi sync is your friend
lamajstro said:
Hi at all,
everytime I put files on the sd card, I have to reboot Android because without ES File Explorer won't show the new files I put on the memory card.
Even "Refresh" in ES File Explorer doesn't helo. Is there any other way?
Thanks!
Click to expand...
Click to collapse
This is a well documented problem. I think it's to do with the way that android sees the SD card with booting from it but don't quote me on that. As far as I know, the best ways round it are:
1. Use dropbox. Free 2gb account and can be very useful.
2. FTP. This is my personal favourite. SwiFTP is a free FTP server for android and there are many free ftp clients for PC/Mac/Linux available. I use FileZilla (opensource ftp client).
3. I believe that if you unmount your SD card before copying files over, then remount however I don't find it particularly successful.
There are other ways like shared folders, email files etc but the top 2 above are the best for me. I use dropbox for small files and one-offs or if I'm copying a lot of stuff and don't want to reboot to winmo, then FTP.
It's also worth noting that if you are a windows user then winamp can sync music over wifi providing you install the winamp android client. However both winamp for windows and android are free.
Hope this helps..
enjoy
Ok, thank you. But that's bad.
The problem is not only that I want to put files through USB on it, it happens also when I use CurrentWidget for example that wants to create a log file on the sd card. Hmm...
I use MDJ Froyo HD 4.6, and there are practically no problems when using mass storage option... After unplugging the files are on the SD card... Only sometimes have to reboot, but not very often...
Why so complicated? Use "Multi Mount SD Card" (it´s free) to connect to PC and you will see new files without rebooting.
lamajstro said:
Ok, thank you. But that's bad.
The problem is not only that I want to put files through USB on it, it happens also when I use CurrentWidget for example that wants to create a log file on the sd card. Hmm...
Click to expand...
Click to collapse
If you're now saying that applications are unable to create files on the SD then there is something wrong with your card. I'd recommend copying everything off it and reformatting it (use disk management to format it, and use the largest cluster size available).
Some builds suffer from this problem and some don't.
Im using HD2ONE 0.3.6 and it's working fine. File explorer detects the new files after transferring via USB Cable
I love this build paired up with the CM6.1.1 Gingerbread Theme
kashifsiddique said:
Some builds suffer from this problem and some don't.
Click to expand...
Click to collapse
I've heard many people complain about not being able to see files after copying them across, but I've never heard anyone say that an app could not make a file on the sd card.
I am having the same exact problem. I was transferring files from this PC to my phone and everything was going fine (it refreshes right away after disconnect) then suddenly, my SD Card got corrupted and I was forced to reformat. I used the same ROM (Darkstone's SUPERAM FROYO) and after that, it won't sync anymore. I even tried removing it and using the HD2ONE (mentioned above) ROM and it was the same. I went home, copied everything from my SD backup from the other PC and same symptoms.
I thought I was missing a sync app or something but no. I looked into each of the folders I copied and most of them are blank.
I hope someone can save us!
I find it easiest and safest to just use ES Explorer to access the network shares and copy files wirelessly. The way our data.img is mounted, giving the pc full access to the sdcard is just not a good move. There was good reason when you connected to windows' sync software it disables your phone from accessing the card.
Even though the hd2one build seems to handle it correctly I almost never do it anymore unless it's for big files. It saves the wear and tear on the usb port anyway.
I had that "problem" too, but for me it was easy to solve. Here is the whole procedure:
So, i want some files to put on my sdcard, i plug in the usb cable and select the option "use as a storage", dont check the "use allways" or "dont ask again" (or whatever this is called on your machine). Now the computer "see" the phone and i put my files on it. In this moment i cant browse the sdcard on my hd2, because its reserved for windows now, (thats why currentwidget cant write onto it, same if you have a wallpaper in some "wallpaper" folder on sd).
Now, when i am done, usually i unplug the usb cable for some seconds and then i plug it in again and choose the option "charge only" and the sdcard gets mounted in android like it should and all my new imported files are visible.
Its the same on WinMo, if you choose there the "HDD" option, you cant browse the sdcard on the mobile. Only if you choose "use active sync"(slower) you are able to browse the sdcard.
cheers
ps: the quickest way for me now is to use wifi and shared folders
I've read somewhere here in the forums that it can screw up the a2sd function
so how can i connect the phone to my PC (because using a card reader every time you need to connect your phone to a PC is @[email protected])
Is this true? any alternative?
I'm using wildpuzzle ROM btw
Hi Dudin.
As standard, when you connect the phone to the pc as a removable storage, Android prevents the SD from being seen by the phone at the same time. As A2SD installs apps to the SD, this obviously causes any Apps on the SD to not work. I dont think its a permanent screw up, as it all should right itself after you disconnect from the computer, but you do have options:
1:Connect as Sync or Charge only. (a quick but pointless workaround if you want to browse your Sd card from the pc),
2: Or do as I do and install "Dual Mount SD" from the market It makes the SD card accessible by both Android and the USB at the same time. Works perfect for me, I can still use my aps and access the SD from the PC simultaneously. (I have used it on Wildpuzzle, Openfire and Cyanogen Mod, Eclair and Froyo versions). You need to be rooted for this though as it asks for superuser permissions.
Hope this helps.
Ok I will clarify for you. If you use dt app2ext patch. When you mount your sd card, the computer mounts the fat32 partition, and does not detect the ext partition, so it does not screw your card up, or the apps.
if you are using froyo app2sd, the apps that are on your sd card will not work when the sd card is mounted.
thanks for the replies
I find a good alternative is Dropbox - and it is mentioned in a lot of threads.
I already used it for work and it is great. No looking around for a USB cable or turning off/remove case/remove card etc which takes ages! Dropbox is free so give it a go! I use it in conjunction with EZ File manager (i think thats what its called) to transfer stuff and unzip archives.
Hope it helps!
hello, I accidentally deleted the /sdcard folder and now it appears that i've lost all my data. So, i've deleted the folder by mistake from windows explorer and the tablet "auto created" a new one and none of my data shows up. I've tried about a dozen recovery programs but none will recognize my tablet. How can I make it show in Windows 7 like a Removable Device and not like a Portable Media Player. I kown it's more of a windows question but maybe someone else here made the stupid mistake i did and kowns how to slove my problem or please send me to a forum were I can get some help.
ps: I kown not to write anything on the tablet's storage until I solve this.
ps2: i don't actually have a sd card, all my data is on the internal memory.
Thank you!
Click to expand...
Click to collapse
Had some free time lately and did some research and I found out that the reason I can’t access the internal storage through software like recuva or other data recovery sw, it is because Honeycomb uses MTP (Media Transfer Protocol) instead of UMS (USB Mass Storage), like android did until honeycomb and data recovery software doesn’t work on MTP, or at least none of the ones I’ve tried, and I’ve tried a few. So, I decided to change the thread question to: Can the Acer a500 support any other Android OS released except honeycomb or ICS (I read it uses MTP also)? and: Can the internal storage be accessed by a recovery software on Linux or any kind of OS? plus: Did anyone manage to recover data from internal storage through any method?
Ps: I don’t need a full working rom, just the touch screen or a mouse so I can mount the internal storage.
Ps2: I would have tried it myself, but I don’t have the knowledge(all I could think about was to download the rom from other tablets that run on 2.3) or the time to joggle with roms on my acer so if any of you developers out there could help me I would be in great debt to you.
Have you tried these apps? (seems you need root though)
I don't know if they will work, but just trying to help you out (I too have deleted my internal memory, but it always happened while ROM flashing... forgot to back up my files first).
https://market.android.com/details?id=fahrbot.apps.undelete
https://market.android.com/details?id=com.hexamob.hexamobrecoverypro
https://market.android.com/details?id=com.hexamob.hexamobrecoverylite
(^ the free and possibly not as good version of the one above it)
Also, on the W7 computer, have you tried Recuva?
Again, not sure if it will work, but I have used it for memory cards, flash drives, etc and it worked really well.
I think the biggest challenge though would be the way that the computer reads the tablet. It doesn't appear like a normal external USB device.
So, I think that an app will be your best bet. I think too that Android keeps apps*, OS*, and user data (your pics, movies, documents, etc) on separate partitions, so installing an app shouldn't overwrite any of your old stuff. I am only 90% sure of that though. :/
*It may actually be apps + OS
Were you rooted??? Did you make a nandroid backup??? If you have a nandroid back up you can restore just the data partition from recovery and you will be current as of your last backup. Another major reason to root your device.
vladx1007 said:
hello, i accidentally deleted the /sdcard folder and now it appears that i've lost all my data. So, i've deleted the folder by mistake from windows explorer and the tablet "auto created" a new one and none of my data shows up. I've tried about a dozen recovery programs but none will recognize my tablet. How can I make it show in Windows 7 like a Removable Device and not like a Portable Media Player. I kown it's more of a windows question but maybe someone else here made the stupid mistake i did and kowns how to slove my problem or please send me to a forum were I can get some help.
ps: I kown not to write anything on the tablet's storage until I solve this.
ps2: i don't actually have a sd card, all my data is on the internal memory.
Thank you!
Click to expand...
Click to collapse
This is untested, but it you install
https://market.android.com/details?...51bGwsMSwxLDEsImNvbS5mdW5reWZyZXNoLnNhbWJhIl0.
on your tablet then try to access your files using your recovery program on your pc. If you have questions about samba server look here.
http://forum.xda-developers.com/showthread.php?t=1317847&highlight=samba
same issue
just connected to PC in usb debug trying to copy to pc. copy did not go thru but sdcard went empty !!!
i did not do any mistake.
samba did not help show old files/folders.
need to find a way to undelete
nuzbabu said:
just connected to PC in usb debug trying to copy to pc. copy did not go thru but sdcard went empty !!!
i did not do any mistake.
samba did not help show old files/folders.
need to find a way to undelete
Click to expand...
Click to collapse
My thoughts were that Samba acts as a server and would be used with wifi to show as local network share on your pc. Then to use a program to recovery your files. I think that idea is not possible after further checks. Seems none of my recovery apps will recover from network drive. Some will save to Network drive though, but that doesnt help you.
One of the apps from the market spexwood suggested may be your only hope.
I would suggest getting an sdcard and save your photos and videos on it.. much easier to recover if erased.
Had some free time lately and did some research and I found out that the reason I can’t access the internal storage through software like recuva or other data recovery sw, it is because Honeycomb uses MTP (Media Transfer Protocol) instead of UMS (USB Mass Storage), like android did until honeycomb and data recovery software doesn’t work on MTP, or at least none of the ones I’ve tried, and I’ve tried a few. So, I decided to change the thread question to: Can the Acer a500 support any other Android OS released except honeycomb or ICS (I read it uses MTP also)? and: Can the internal storage be accessed by a recovery software on Linux or any kind of OS? plus: Did anyone manage to recover data from internal storage through any method?
Ps: I don’t need a full working rom, just the touch screen or a mouse so I can mount the internal storage.
Ps2: I would have tried it myself, but I don’t have the knowledge(all I could think about was to download the rom from other tablets that run on 2.3) or the time to joggle with roms on my acer so if any of you developers out there could help me I would be in great debt to you.
Ok So I am here because I've posted in other places in these forums with no replies yet, So it would be better to create a thread specific to my problem.
I have an Omnia 2, thinking of acquiring the Fryo 2.2 OS, not specific about wether I want what version but here are the problems I come across before being able to install it.
1- plugging in my phone under Settings -> My storage will not show my storage on my computer, having the external SD option will show my 16GB SD card.
2- Backing up. How do I back up my storage if I can't see it on my computer? When I turn on active sync a blank storage appears other than my SD card (assuming its the internal storage) but the size seems rather small (167MB). I've been reading peoples' posts and I'm supposed to have around 2GB I believe, and either way the files I'm trying to put inside for the android OS don't seem to fit there.
3- Partitions? How can I set those up for both the internal and external storage? Is there a program or feature to do so? My SD card under properties says FAT-32 so I'm not sure on how to do it IF I need to.
4- Using a W7 computer, so that knocks off any ubuntu installations, and also link is broken for Almars Beta 1 file that I was thinking of using for an SD installation.
Any help would be appreciated, I've had this phone since 2009 and I'm really hoping I can come across some help to make it work since I do want to keep this phone for a bit longer before I spend more money on a different cellphone!
Thank you!
Try out the new CyanogenMod from the link below.
http://windows.modaco.com/topic/346446-cyanogenmod-beta1-omnia-2-updated-02122011/
It has the SD Card auto installer, try it..
Back up data on your SD card first and then format your SD card within the phone and then use auto installer to install it.
As you said your computer wont detect the My Storage, try the steps below..
Transfer your data from My Storage to external SD Card, then connect your phone to computer using My Storage mode in settings.
Download Mini Tool partition wizard and format your My Storage (Mini tool partition will be able to see your My Storage even though your computer doesn't).
After format, your computer should be able to detect My Storage.
Now copy the downloaded android files to My Storage and run the auto installer as instructed in the ReadMe file inside the download package.
PS: Don't forget to backup the data on SD Card to your computer
Hope this helps
Ok so what you meant by taking things from my storage is going to file explorer and basically copying everything from the "my device" to the SD card?
Just want to make sure because if it doesent work then I haven't gotten anything backed up right.
Went to file explorer -> copied everything in the top folder which is application date, connMgr, doc and setttings, program files etc. is this all thats needed basically?
Thanks
P.S some of the things I tried taking like global.txt or exe couldn't be copied because of violations or some weird error, is it alright not to have those?
Update: My storage is still not revealed by the mini tool partition program, went under usb settings -> my storage and refreshed disk information, nothing shows up ugh it might be impossible for me to do this after all....
nobody can help me in regards to this? well then I guess a new cellphone is in order
grrrrr I should've gone with a iphone 3G or BB 9700 at the time instead...
ClaudioPerez said:
Ok so what you meant by taking things from my storage is going to file explorer and basically copying everything from the "my device" to the SD card?
Just want to make sure because if it doesent work then I haven't gotten anything backed up right.
Went to file explorer -> copied everything in the top folder which is application date, connMgr, doc and setttings, program files etc. is this all thats needed basically?
Thanks
P.S some of the things I tried taking like global.txt or exe couldn't be copied because of violations or some weird error, is it alright not to have those?
Update: My storage is still not revealed by the mini tool partition program, went under usb settings -> my storage and refreshed disk information, nothing shows up ugh it might be impossible for me to do this after all....
Click to expand...
Click to collapse
I guess you will have to reflash the ROM again since your problem seems to be unsolvable. My suggestions is to flash a stock 6.5.3 ROM before you transfer the auto SD installer.