Database Users

Nexus One heating up severely

I wasn't sure where to put this but any help would be appreciated. Lately my phone gets extremely hot, I'm running froyo 2.2 latest built. And I'm running launcher pro home replacement replacement with only 5 screens. And I have battery indicator telling me right now that the temp of my phone is 105.1F. How do I find out which app(s) is making my phone heat up?

Try looking at what's eating your battery then go from there.

It shows my display at 86% and android system at 8% those are the highest using battery...my backlight is at 50% brightness...would Anyone recommend having that set to auto brightness?

i have my n1 set to auto and it still gets pretty hot. i have not had any issues with it over heating though so maybe give it a try. also, are you running a task killer? ive got security set to low, and it auto kills apps every 30 minutes or so. it seems to help out a bit, saves battery too.

I've had this problem since I updated to Froyo.
After a while, the data connection seems to be used -constantly-
and I really mean -constantly-, I'm also running Launcher Pro - So maybe there's something there?
As an earlier post said, the Screen appears to be the top "battery" user when looking at the battery stats (I've found these to be EXTREMELY unreliable though )
My screen is set to Auto, so I doubt that's where the problem is.
Also, in my case, it's the very bottom of the phone that gets hot (I believe that's where the antenna / actual chipset for the radio is?)
One thing I've found that "helps" so far, is to disable account sync, then re-enable it. Apparently that's what's causing an overuse of 3G for me. This only helps in some cases though.
Usually I just turn off data completely for a few seconds and re-enable it.
Any "tips" on what could be using that much data all the time (Maybe it's not even using the data, but just somehow trying to keep a single connection alive?) would be greatly appreciated. I'm honestly not sure here!
Any ways, that's what I've found out "so far".
/T0yK4T

Thanks for all the feedback and tips I will try all these things. But I agree and ever since I upgraded to froyo it gets extremely hot. And I'm running launcher pro but I tested it with the stock launcher and still gets hot....who knows....

I'm having the same issue on my nexus. I have a custom rom with stack kernel and ADWLauncher with 3 screens and brightness on auto.
What should i do?
Sent from my Nexus One using XDA App

Run System Panel, it'll show you any apps using CPU, and network stats.
Something is clearly wrong with your phones/config/cache/something, my Nexus One stays ICE COLD all of the time even with K9 mail with push IMAP, weather syncing, GPS uploading to my website every 10 minutes, etc..

Battery Solution the **FINAL POST**

UPDATE Dec 9:
ALL i did was use Autoboot (Exceller Multiple Build Loader) set at 3 seconds
Try this setup if all else fails
Rom: ChuckyRom Lite HERE
Radio: 2.15.50.14 HERE
Droid: HyperDroid 1.7 HERE
AutoBoot: Exceller Multiple Build Loader for Android/Ubuntu HERE (Comes preinstalled in ChuckyRom)
PLEASE KEEP LEAVING RESULTS AS I TRY THEM, AND CAN UPDATE THE FIRST POST
10/25:
I have been reading and in a recent post I read HAVE THE BUTTON LIGHTS ON WHEN U BOOT ANDROID and u will save battery and its true try this!
AGAIN, PRESS A BUTTON IN WM AND HAVE THE KEYPAD LIGHTS ON.
THEN AS QUICKLY AS POSSIBLE BOOT ANDROID.
I AM CURRENTLY GETTING 3MA WITH SETCPU
I had to try this twice before it worked but THE KEY IS TO BOOT ANDROID AS SOON AS THE KEYPAD LIGHYS TURN ON!

chrisizzle492 said:
I have been reading and in a recent post I read HAVE THE BUTTON LIGHTS ON WHEN U BOOT ANDROID and u will save battery and its true try this!
AGAIN, PRESS A BUTTON IN WM AND HAVE THE KEYPAD LIGHTS ON.
THEN AS QUICKLY AS POSSIBLE BOOT ANDROID.
I AM CURRENTLY GETTING 3MA WITH SETCPU
I had to try this twice before it worked but THE KEY IS TO BOOT ANDROID AS SOON AS THE KEYPAD LIGHYS TURN ON!
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
I just posted this in another battery thread but I think the real key is booting Android as quickly as possible and not really the lights so much as I have achieved similar results just using Exceller Multiple Build Loader app and not even touching the keys/lights. C/P from the other thread-->
Tried different techniques to get better battery and found that even on the same build with exact same setup would give varying results. Here's my setup that I would like others to try and post their results. SetCpu with screen off profile set to 245min/max 100 priority and whatever main profile you like; but use conservative preferably or interactive for best battery performance. Any task killer that auto kills all tasks with screen off (be sure to add SetCPU to ignore list). And here is the most important step, use an auto android booting app with minimum boot time setting. I have been doing some experiments with this and found that if you boot into Android as soon as possible, it seems to give better battery performance as opposed to playing around in WM then booting Android. Have tried this with several WM/Android combos. For the first time ever I'm able to get comparable battery performance out of Android as WM. I'm running a bare bones WM (but should work with and WM rom) and using Exceller Multiple Build Loader app set to 3 secs. Even running several sense builds I was able to achieve 3-7 mA draw during standby according to current widget. Took my phone off the charger at about 6:30 a.m. and it is now 11:15 and I still have 25% battery left after pretty heavy usage on standard battery. This is as good or better than what I usually get from WM! Hope this helps.

This was the one thing that was ruining my Android on HD2 experience. I finally got this step right after a few tries.
I've been using it for two days now, and getting consistent 5-8mA readings on standby. There's definitely something to either booting Android quickly and/or hitting the back button to turn on the LED backlight on the buttons.
I just checked my phone, and it's reading 5mA.
And I don't even have SetCPU on my phone. Should I try it out?

I think HTC winmo sense is the culprit. I disable the sense in winmo and get very low Android battery usage during standby. Sometimes around 3mA.
Sent from my HTC HD2 using XDA App

I also suggest to disable sense and put wmo in offline status.
Sent from my HTC HD2 using XDA App

leeyunfook said:
I think HTC winmo sense is the culprit. I disable the sense in winmo and get very low Android battery usage during standby. Sometimes around 3mA.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
why should turning off sense be good when it comes to battery usage under android? this would mean winmo and sense are running in the background of android...which is not the fact!

chrisizzle492 said:
I have been reading and in a recent post I read HAVE THE BUTTON LIGHTS ON WHEN U BOOT ANDROID and u will save battery and its true try this!
AGAIN, PRESS A BUTTON IN WM AND HAVE THE KEYPAD LIGHTS ON.
THEN AS QUICKLY AS POSSIBLE BOOT ANDROID.
I AM CURRENTLY GETTING 3MA WITH SETCPU
I had to try this twice before it worked but THE KEY IS TO BOOT ANDROID AS SOON AS THE KEYPAD LIGHYS TURN ON!
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
You had to try this 2 times before it worked yet you claim this is the final solution for battery drain problems?

i agree with you guys but let me just throw this observation into the mix here. i've read somrthing here in these forums regarding the sd card that came with the phone had something wrong with it ( don't really remember the exact issue ) and if you swapped it out for another sd card, there would be less SODs and a better battery as well.
i've tested this as i have a 4gb sd card and have had no problems whatsoever. everything runs smooth as silk. and, once again, the battery life is great.
NOTE: i do use the keypads lights on trick as well.

anap40 said:
You had to try this 2 times before it worked yet you claim this is the final solution for battery drain problems?
Click to expand...
Click to collapse
Please re-read the post. i updated

Most of us don't need to do keypad gymnastics to get those same results.
Just use the exceller boot loader and set it for 3 or 6 seconds. Having stuff turned off till you need it is a great way to preserve the battery.

apallohadas said:
Most of us don't need to do keypad gymnastics to get those same results.
Just use the exceller boot loader and set it for 3 or 6 seconds. Having stuff turned off till you need it is a great way to preserve the battery.
Click to expand...
Click to collapse
Ya thanks for the comment, i was doin this in between class so i didnt have time to just try the Excellor Boot Loader!!!
Updated the First Post Thanks!!!!

well now we hav almost 48 hrs of battery life on android... and moreover i info radio 2.14.xxx is better than 2.15.xxx in battery life...

Not working for me
Sorry thats all not working for me
i'm still having about 60 mA with VBNROM reloaded - 2.15.50.14/ Bangster 1.5 / Scandisk class 2 - 8 GB
I realley tryed everything and have read a lot of posts. I'm really distressed at the moment.
The best battery cosumption i ever experienced was with mccm 2.5 But that one was not stable for me.

Baltheruis said:
Sorry thats all not working for me
i'm still having about 60 mA with VBNROM reloaded - 2.15.50.14/ Bangster 1.5 / Scandisk class 2 - 8 GB
I realley tryed everything and have read a lot of posts. I'm really distressed at the moment.
The best battery cosumption i ever experienced was with mccm 2.5 But that one was not stable for me.
Click to expand...
Click to collapse
1. Are you using SetCPU with a 245 max screen off profile? 2. Are you disabling WiFi, data and GPS when not using it? 3. Are you using a auto task killer with only SetCPU and Current Widget in ignore list? Also, I don't have 3g in my area but if you do I guess it could account for increased battery drain. If you're in an area that is in/out of coverage, this will cause higher battery drain as well. I get spotty coverage where I work and the battery drain is terrible.

Try mdeejay sense rEVOlution 2.0 androind build with your vbn wom rom - works great !
Try this:
1. switch phone radio off in winmo
2. power off and charge until green light comes on
3. boot winwmo on vbn, then immediately click on EBL
4. boot into mdeejay sense rEVO 2.0
5. turn sense off and use LauncherPro
I get *very good* battery life now with avg 5-7mA draw as evidenced by currentwidget.
z

Baltheruis said:
Sorry thats all not working for me
i'm still having about 60 mA with VBNROM reloaded - 2.15.50.14/ Bangster 1.5 / Scandisk class 2 - 8 GB
I realley tryed everything and have read a lot of posts. I'm really distressed at the moment.
The best battery cosumption i ever experienced was with mccm 2.5 But that one was not stable for me.
Click to expand...
Click to collapse
try my complete setup

Baltheruis said:
Sorry thats all not working for me
i'm still having about 60 mA with VBNROM reloaded - 2.15.50.14/ Bangster 1.5 / Scandisk class 2 - 8 GB
I realley tryed everything and have read a lot of posts. I'm really distressed at the moment.
The best battery cosumption i ever experienced was with mccm 2.5 But that one was not stable for me.
Click to expand...
Click to collapse
a few things to try
1
boot into android as quick as possible, 3 or 6 seconds
disable gps location in android
activate the lights when haret is loading
disable wifi & 3g
disable hotspot
disable sync
running htc sense? try a build without it
and many more attempts
im finally at 3mA in airplane mode, 5mA on phone, 7mA with wifi, 20mA with wifi & 3g

chrisizzle492 said:
try my complete setup
Click to expand...
Click to collapse
I want to try that version of Android, but I don't want to mess with my good setup...

Baltheruis said:
Sorry thats all not working for me
i'm still having about 60 mA with VBNROM reloaded - 2.15.50.14/ Bangster 1.5 / Scandisk class 2 - 8 GB
I realley tryed everything and have read a lot of posts. I'm really distressed at the moment.
The best battery cosumption i ever experienced was with mccm 2.5 But that one was not stable for me.
Click to expand...
Click to collapse
no need for keypad gymnastics or other weird and wonderful combinations - before booting into Android, just use KeypadLedControl to force the keypad lights to stay on, then fire up Android using your loader of choice (I use Android Loader, modified to automatically call KeypadLedControl to turn on keypad lights, instead of just letting it run on WinMo startup).
Been rebooting 5-6 times now with consistent low 5-10ma standby current.
Link to KeypadLedControl for lazy people: http://forum.xda-developers.com/showthread.php?t=605731

The Solution....kind of ;-)
Thx for u'r replys.
I considered all u'r tips and sry dudes it didn't work for me I think the problem was related to the Bangster Build, even though i have been lonesome with my issues.
I changed the LED lib, and tryed to let the LEDs on while booting, set CPU is in condervativ mode/screen off 245min/245max 100% interactiv. And yep, GPS and Wifi where off. I even searched for any SD-Card related Problems in regestry. But Chucky did some great work i think. (i switched again concernig to faster boot)
At some time i think each Leo is different to the other. I changed to Hyperdroid 1.7 with 2.14 Radio and the results are definitely mind blasting.
12 hours on the road, did some surfing, some calls, 2 h musik.
Strange though i used the same kernel and same Radio. Something must have gone wrong by flashing Bangster or something.

[Q] So what is currently the most stable setup for android on HD2?

So about 1-2 months ago, I switched to Android on my HD2, but this wasn't a very good rom. Whenever I turned the screen off, it would only light up black (wtf). It stated the battery was empty all the time. And when I had to restart my phone, and tried booting into android again, it would either freeze on the bootscreen, or it would be the darkest screen ever. Sometimes both.
So I ask; What is the most stable setup to date, for HD2?

I would also like to know which is the most stable Android build to-date (i am not bothered with the HTC Sense layar).

I agree ^^
Right now I'm using mdeejays evo sense 2.3 revolution and upgraded the kernel with Hastarin R8 and it is very stable!!
Its gonna depend on many factors such as what WM rom you're running and what radio as well. I would recommend you get chuckdroid WM rom, a good recent radio, and either evo sense 2.3 or Bangsters 1.5 (if you dont want sense) Ive had good results with both.

Latest Energy WinMo ROM, 2.12 radio, the Android build linked below.
Works fantastic, all day, every day. CM6 mod. MDPI/HDPI hybrid too
http://forum.xda-developers.com/showthread.php?t=769026

MichaelVS said:
So about 1-2 months ago, I switched to Android on my HD2, but this wasn't a very good rom. Whenever I turned the screen off, it would only light up black (wtf). It stated the battery was empty all the time. And when I had to restart my phone, and tried booting into android again, it would either freeze on the bootscreen, or it would be the darkest screen ever. Sometimes both.
So I ask; What is the most stable setup to date, for HD2?
Click to expand...
Click to collapse
I like my setup (in my sig). There's a new skinnyEVO v1.5, and since I haven't tried it, I can't speak of its stability.
The issue you'll encounter in most Android builds is data dropping, which is caused by using PPP (not RMNET) connection. This can be 'fixed' by turning on/off airplane mode.

+1 for Mdeejay builds
just loaded Mdeejay eVo Sense v. 1.1 Matted this morning, so far v smooth, battery 5mA in standby, camera with flash working, no probs so far.
deff' the best of the 3 android builds ive tried
http://forum.xda-developers.com/showthread.php?t=797357

For the one who said that it depends on many factors, here is my current specifications;
OS-Version
5.2.21869 (21869.5.0.82)
Manila-Version
2.5.19211619.0
ROM-Version
1.66.409.1 (76641) NOR
ROM-Date
01/12/10
Radioversion
2.12.50.02_2
Protokollversion:
15.40.50.07U
What kind of setup would be best for my specs?

sumflipnol said:
I like my setup (in my sig). There's a new skinnyEVO v1.5, and since I haven't tried it, I can't speak of its stability.
The issue you'll encounter in most Android builds is data dropping, which is caused by using PPP (not RMNET) connection. This can be 'fixed' by turning on/off airplane mode.
Click to expand...
Click to collapse
I'm on O2 in the UK. Using the latest Sense version of the PhireMOD Skinny EVO (v1.5) with 2.15 radio and the latest Chucky ROM 23139 ~ 3.14. Rock solid stability and very smooth and fast. I get an occasional data drop but that's the same with every PPP build. Battery life with light usage is approx 2 days.
Just upgraded to V8 kernal and it's smoother than ever. Best andriod build i've used - apart from the data drops (which is not the fault of the build) it's pretty much perfect for me. The key is to get the right combination of radio/wmrom/andriod. Unfortunately it seems to be different for different people so just a case of trial and error until you find the right combo. In my case the switch to 2.15 radio solved a lot of issues.

energy and skinnyEVO v1.5 with latest kernell update is the best setup you can get.... after a long search i foud this one to be the best..... oh radio 2.12.50.xxxx great battery life..... >

energy rom and mdeej's Revolution is by far the best sense build to date and there is a new radio for those of you that dont know yet 2.15

There is no guaranteed catch all perfect setup. what may run perfectly fine for me may run absolutely horrible for you. Different strokes for different folks.
Factors you have to consider:
SD Card (class, size, whether is SDHC or not, how it is formatted, cluster size)
Battery calibration (does your battery last a long time in WinMo?)
Your own knowledge (if you cannot be bothered to search for any simple problems then you WILL get frustrated trying to run Android)
the best way you can find out the best setup for you is trial and error.

dazzyb2k3 said:
I'm on O2 in the UK. Using the latest Sense version of the PhireMOD Skinny EVO (v1.5) with 2.15 radio and the latest Chucky ROM 23139 ~ 3.14. Rock solid stability and very smooth and fast. I get an occasional data drop but that's the same with every PPP build. Battery life with light usage is approx 2 days.
Just upgraded to V8 kernal and it's smoother than ever. Best andriod build i've used - apart from the data drops (which is not the fault of the build) it's pretty much perfect for me. The key is to get the right combination of radio/wmrom/andriod. Unfortunately it seems to be different for different people so just a case of trial and error until you find the right combo. In my case the switch to 2.15 radio solved a lot of issues.
Click to expand...
Click to collapse
Sorry for the noob question, but can somebody describe data dropping to me?
I got a HD2 from work on the weekend, so the first thing I did was install android
I installed: Radio_2_14_50_04, and FroyoStone_Sense_V3.2. This combo is working fine and seems stable.
The problem I had yesterday was that I could not access the internet although I had a strong 3g or H signal. The problem would suddenly disappear and access would be fine for a few minutes and then no access again. Access seems more consistant today.
Battery life seems a problem too, it was fully charged at 7am this morning and was down to 5% by 5pm, that was with mild usage apart from about an hour mp3 and 30 min gps.
Any of this sound normal for android on a HD2?

MichaelVS said:
So about 1-2 months ago, I switched to Android on my HD2, but this wasn't a very good rom. Whenever I turned the screen off, it would only light up black (wtf). It stated the battery was empty all the time. And when I had to restart my phone, and tried booting into android again, it would either freeze on the bootscreen, or it would be the darkest screen ever. Sometimes both.
So I ask; What is the most stable setup to date, for HD2?
Click to expand...
Click to collapse
MichaelVS said:
[Q] So what is currently the most stable setup for android on HD2?
Click to expand...
Click to collapse
is the one you really like, the one that appeals to your needs and whims the most
so try them builds around and share your ideas and experience with each of them

tonyh0905 said:
Sorry for the noob question, but can somebody describe data dropping to me?
I got a HD2 from work on the weekend, so the first thing I did was install android
I installed: Radio_2_14_50_04, and FroyoStone_Sense_V3.2. This combo is working fine and seems stable.
The problem I had yesterday was that I could not access the internet although I had a strong 3g or H signal. The problem would suddenly disappear and access would be fine for a few minutes and then no access again. Access seems more consistant today.
Click to expand...
Click to collapse
there is a VERY BIG discussion on a lot of threads about data drops, search for them. that is one nagging PITA at the moment for Android. switching airplane
mode on and off always worked for me though, also need to have the correct
APN setting for your network
tonyh0905 said:
Battery life seems a problem too, it was fully charged at 7am this morning and was down to 5% by 5pm, that was with mild usage apart from about an hour mp3 and 30 min gps.
Any of this sound normal for android on a HD2?
Click to expand...
Click to collapse
reboot Android at least three times and the battery usage will improve drastically
my juice lasts a full day of moderate to heavy usage.

jigners said:
there is a VERY BIG discussion on a lot of threads about data drops, search for them. that is one nagging PITA at the moment for Android. switching airplane
mode on and off always worked for me though, also need to have the correct
APN setting for your network
reboot Android at least three times and the battery usage will improve drastically
my juice lasts a full day of moderate to heavy usage.
Click to expand...
Click to collapse
Thanks for the info...the airplane mode trick worked a treat
When you say reboot android 3 times, do you mean reset the whole device, or is there a way to shut down and restart the android os?
Cheers
Tony

I use:
VBN reloaded 2 minimal ROM
mdeejay revolution 2.0
radio 2.12.50.
One time deals:
i) turn off auto backlight in winmo
ii) do a g-sensor calib in winmo
Make sure you :
i) Load android using EBL *as soon as you possibly can*
ii) press the back button when its loading HaRET
and you are all set !!!
z

[Q] Battery use always exceeds 200mA and wifi tethering doesnt work.

Hello, I have been installing android builds on my HD2 for months now, and have to say the recent development has really left me with a great android phone.
One problem I find I have consistently is that I can never get the kind of battery usage others speak of. Mine trends at 350mA right now which seems wrong cause my battery life isnt THAT bad. and I have never had a build thats had better than 10%->hour.
I'm using ShubCRAFT 2.0 with the hastarian r8 kernel, chunkydroid ROM and 02.12 something radio, i also have an australian HD2.
I keep my screen quite dim, wifi and bluetooth off, no over or underclock (since r8 doesnt support it), no auto task killer.
And while I'm at it my wifi tethering should work based on my build and kernel but every time i check it it says "Error" and third party apps are a no go either.
Any insight would be greatly appreciated.
Also to all the devs, I love you, I want to carry your children.

i always make setcpu, max 619mhz min 254, screen off: max & min 254, auto task killer when screen off and i disable all auto sync, like facebook gmail etc.... im getting acceptable result, around 2 days with normal use

See the FAQ link in my signature. I put some tips there that may help.
Sent from my HTC HD2

hastarin said:
See the FAQ link in my signature. I put some tips there that may help.
Sent from my HTC HD2
Click to expand...
Click to collapse
I had just finished reading that list and forgot to try the 3sec. boot which helped. I'm at 10mA now it makes no mention of the wifi tethering problem, any idea on the subject??
EDIT: It flew back up to 200+ after 5 minutes and hasnt gone back down since.

I get 14 Hours standby, but the phone is 4 hours aktivate! I use also chuckydroid. My radio rom is 2.12 and I use Froyostone series !
Sent from my HTC HD2 using XDA App

58mAh battery drain on Gingerbread

Hi Guys,
I have been using gingerbread build's for some time. I notice battery drain sometimes battery drain suddenly spikes to 58mAh for sometime (without Wifi or BT)..for around 10-15mins and then comes back to normal after 10-20mins(<10mAh). I experienced this issue first in MDJ Cm7 2.6 build..I thought that time must be build specific..so I switched to Desire HD build which was free of this issue...however I don't like sense anymore, so moved back to typhoon's CM7 build.But again I encountered the same issue. I changed the kernel to gauner's kernel, since the desire HD build I was using was using this kernel and free of the issue, but again it surfaced back.
Now I switched to pongster's hyperdroid build. This build has a very low power drain...most of the time its < 4mah on this build...Also I haven't installed any widgets (except for current widget) and have still the stock ADW launcher (to rule out the possibility of this bug caused by any s/w)...but again the drain jumped to 58mAh .Is it just me or other gingerbread users face this drain also randomly. could it be due to SD card, I am using ext4 data partition.

Mafioso said:
Hi Guys,
I have been using gingerbread build's for some time. I notice battery drain sometimes battery drain suddenly spikes to 58mAh for sometime (without Wifi or BT)..for around 10-15mins and then comes back to normal after 10-20mins(<10mAh). I experienced this issue first in MDJ Cm7 2.6 build..I thought that time must be build specific..so I switched to Desire HD build which was free of this issue...however I don't like sense anymore, so moved back to typhoon's CM7 build.But again I encountered the same issue. I changed the kernel to gauner's kernel, since the desire HD build I was using was using this kernel and free of the issue, but again it surfaced back.
Now I switched to pongster's hyperdroid build. This build has a very low power drain...most of the time its < 4mah on this build...Also I haven't installed any widgets (except for current widget) and have still the stock ADW launcher (to rule out the possibility of this bug caused by any s/w)...but again the drain jumped to 58mAh .Is it just me or other gingerbread users face this drain also randomly. could it be due to SD card, I am using ext4 data partition.
Click to expand...
Click to collapse
Try turning sync off and seeing if that is what causes the spikes

XsceneXhippieX said:
Try turning sync off and seeing if that is what causes the spikes
Click to expand...
Click to collapse
yes, I thought of that...and have removed facebook sync but I do need my gmail sync..I don't have any other sync's enabled except contacts and gmail...lol, is it too much to ask ? and i don't have any issues in sense builds where I have gmail, weather and facebook sync on

Mafioso said:
yes, I thought of that...and have removed facebook sync but I do need my gmail sync..I don't have any other sync's enabled except contacts and gmail...lol, is it too much to ask ? and i don't have any issues in sense builds where I have gmail, weather and facebook sync on
Click to expand...
Click to collapse
hmmm, I don't know, maybe its an install issue, I have everything always syncing, but I also have only 2g connection (at&t's terrible network) and I haven't had this issue using both pongsters and mdj's builds

XsceneXhippieX said:
hmmm, I don't know, maybe its an install issue, I have everything always syncing, but I also have only 2g connection (at&t's terrible network) and I haven't had this issue using both pongsters and mdj's builds
Click to expand...
Click to collapse
Hmmm ok...I don't think its an install issue..i always do a task 29 before switching builds from different devs..and follow the CWM settings as recommended by the dev....rest the builds are running so smoothly especially pongsters without any FC's or such...
BTW why are using AT&T...t-mob is cheaper and faster(3g)

It happens to me too sometimes. What I do is disable wifi and gps wait two minutes and battery drain on standby becames 5mA again. When I enable both again, it stays on 5mA. Don't know what's causing it, but I have it too.

I have this Problem if I use Livewallpapers.
Now i use normal Wallpapers and it is gone.
edit: 5-8 mA with normal Wallpaper

Well for me, it turned out to be the sync indeed as XsceneXhippieX mentioned.
I turned off all sync just for the heck of it and the problem hasn't come back for last 2 days...I enabled Background Sync (not auto sync) and problem resurfaced within few hours...so i'm pretty sure..Its the sync which is causing this Guess I need to go back to Sense ROM now...
And BTW i'm not using live wallpapers..
Also one more interesting fact...phone conusmes more battery on 2G networks than on 3G. I forced to phone to use 2G network and idle power drain was >5mAh all the time...while on 3g its 2-5mAh mostly...

58 mah on Ginger is usually the GPS. Turn it on then off again, somehow if you use it or any app use it, even if the app closes the GPS chip doesnt turn off.
Just turn it off using the widget or in settings.
If that doesnt fix it, make sure Bluetooth is off. it consumes 58-59 mah, even if it is not connected, its a known issue on Ginger. Bluetooth never goes to sleep, gotta turn it off manually.
Hope it helps!.

Zephyrot said:
58 mah on Ginger is usually the GPS. Turn it on then off again, somehow if you use it or any app use it, even if the app closes the GPS chip doesnt turn off.
Just turn it off using the widget or in settings.
If that doesnt fix it, make sure Bluetooth is off. it consumes 58-59 mah, even if it is not connected, its a known issue on Ginger. Bluetooth never goes to sleep, gotta turn it off manually.
Hope it helps!.
Click to expand...
Click to collapse
Thanks for the help, but I'm sure its due to sync...I turned off the sync and for last 3 days there hasn't been a single occurrence of 60mAh drain.

gonna try turning off sync cause ive been having this issue.
just tried second gingerbread rom and it began immediately,
and this is with data, wifi, bt, gps all off.
hopefully sync does it

turning background data off didnt help.. still getting 70 to 80 drain.
and playing music in standby had me up to 110 which is higher than usual too

lbhocky19 said:
turning background data off didnt help.. still getting 70 to 80 drain.
and playing music in standby had me up to 110 which is higher than usual too
Click to expand...
Click to collapse
Is it a spike or continous drain? Also which ROM/kernel are you using?

its a spike, other weird thing is since i got on gingerbread, currentwidget has sucked at getting a continuous read. it has big gaps in the log.
http://forum.xda-developers.com/showthread.php?t=905060
thats the one im on now and i was on clean gingerbread before that

lbhocky19 said:
its a spike, other weird thing is since i got on gingerbread, currentwidget has sucked at getting a continuous read. it has big gaps in the log.
http://forum.xda-developers.com/showthread.php?t=905060
thats the one im on now and i was on clean gingerbread before that
Click to expand...
Click to collapse
Yes currentwidget don't give a continuous read for me too...but its the same behavior in froyo based sense build also...
Anyway, are you using any widgets installed which sync? Disable them and see, though i'll advice to disable all widgets (not only ones which sync) and see

score mobile and stock weather i have. but if i turned off background data and autosync they shouldnt be able to do anything i thought?
il give it a try
and currentwidget always did minute by minute for me in froyo. on sense at least i cant remember the last time i used a stock build

lbhocky19 said:
score mobile and stock weather i have. but if i turned off background data and autosync they shouldnt be able to do anything i thought?
il give it a try
and currentwidget always did minute by minute for me in froyo. on sense at least i cant remember the last time i used a stock build
Click to expand...
Click to collapse
Well I had fancy widget installed in which I had set weather to be updated always (irrespective of background data option) once a day and only on Wi-Fi..yet it still caused 58mAh drain....try disabling them for a while and see...

just deleted score mobile and deactivated weather.
after a few minutes turned it on. 85ma...

You can change the kernel to see if it helps...try Gauner's or RAFPIGNA
or better switch to froyo build...i'm switching myself..there's not much use to smartphone if you turn off syncs anyway

yeah i guess back to froyo. whats the best stock one? def dont want sense anymore.
and has anyone made an app or something to do the awesome shutoff animation from 2.3?