I have one unlocked verizon htc ozone. CAn I use it on other CDMA network?
When I insert reliance cdma sim, it asks activate your mobile. When I dial *228, it fails to activated (says 'programming unsuccessful").
What could be the problem and how to activate it?
Related
Hi! I bought my Imagio from verizon I unlocked it, but it doesn't recieve any GSM signal, the settings are on GSM/UMTS anyone has an idea how to resolve a problem... By the way is anyway to cook this?
I need to unlock my phone before I travel in a few days, how did you unlock your phone?
akomecr said:
Hi! I bought my Imagio from verizon I unlocked it, but it doesn't recieve any GSM signal, the settings are on GSM/UMTS anyone has an idea how to resolve a problem... By the way is anyway to cook this?
Click to expand...
Click to collapse
Do you have a working SIM card from AT&T or T-Mobile in the SIM slot?
bastukee said:
I need to unlock my phone before I travel in a few days, how did you unlock your phone?
Click to expand...
Click to collapse
Call VZW and ask.
On ebay it's a ton of services about whitestone unlock, and my problem was an issue on the operating band of GSM for example in the USA you must use 950/1900 on other countries like Costa Rica you need 1800, thanks to all for your help
You should be able to contact VZW and have them unlock it so you can use whatever carrier SIM you have for the country/area you are in. The stock SIM is Vodaphone and I think will only work where Vodaphone service exists. Otherwise make sure the phone is in Global and not CDMA only. Go to the Settings Tab, click Menu then select Phone Network Mode select Network tab.
I called verizon and they gave me codes to unlock both my phones. I slapped an ATT sim into my imagio and it was working on the ATT network, no problem at all.
Hi, where do you enter the sim unlock code on Imagio?
Thanks.
devlspawn said:
I called verizon and they gave me codes to unlock both my phones. I slapped an ATT sim into my imagio and it was working on the ATT network, no problem at all.
Click to expand...
Click to collapse
I just got off the phone with Verizon in regard to this.
Below is what I found. The Global Verizon Rep will be happier if you enter the code while you are on the phone with them; they want to verify that it works. It actually took about 10 minutes.
Here is what I found: http://pdaphonehome.com/forums/htc-imagio/138569-how-unlock-verizon-imagio-sim-card.html
If you are going to be traveling abroad or simply want your Imagio to be unlocked its very easy to do and should only take about 3-5 minutes on the phone with Verizon.
Call 1(800)-711-8300 from a different phone, enter your Verizon phone number, then select option 2.
Tell them that you will be traveling abroad and plan to just buy a pre-paid SIM card when you get there, and that you simply need the unlock code for your phone. They will check your account standings, and then give you an 8 digit code.
You need to enter the code in the security section of your phone.
With TF3D...
Start>Settings> All Settings> Personal> Security
Without TF3D Enabled...
Start> Settings> Personal> Security
One you do this, soft reset your phone and you are all done. I can take my work phones SIM card (AT&T), put it in my Imagio, and use my Imagio for work now. I did not test the data yet because I do not have data on my AT&T plan. Although if anyone does this and wants to check it, keep in mind you will have to change the number for the data line. both Sprint and Verizon use #777. I am not sure what AT&T or TMobile use.
I have an Imagio from VERIZON.
I had unlocked the GSM network, Should I Unlock the CDMA network as well if I want to use the CDMA Net work?
or I jus need 1 unlock code for both GSM and CDMA?
So, I will have 2 no. in 1 phone one is injected, and another one is using sim card.
I just purchased a Galaxy Note 3 (SM-N900A), full-price, off-contract, from AT&T Wireless. I used an existing GoPhone (prepaid) account/phone number to activate the phone. The phone works (voice calls) with the AT&T SIM. However, I want to use the phone/device on aioWireless. I have a microSIM for aio. I have purchased an unlock code and followed the unlock instructions. I received a "Successful unlock" message after entering the 8 digit network code. However, I cannot make phone calls (or use the data plan) when the aioWireless SIM is installed. When dialing a number with the aio SIM, I get a recorded message that the service has been deactivated, and to contact AT&T.
When I try to verify whether the phone has truly been unlocked by typing *#SIMLOCK# nothing happens. If I then push the CALL button, I then get the message: Connection problem or invalid MMI code.
Any clues what is going on?
stylecraft said:
I just purchased a Galaxy Note 3 (SM-N900A), full-price, off-contract, from AT&T Wireless. I used an existing GoPhone (prepaid) account/phone number to activate the phone. The phone works (voice calls) with the AT&T SIM. However, I want to use the phone/device on aioWireless. I have a microSIM for aio. I have purchased an unlock code and followed the unlock instructions. I received a "Successful unlock" message after entering the 8 digit network code. However, I cannot make phone calls (or use the data plan) when the aioWireless SIM is installed. When dialing a number with the aio SIM, I get a recorded message that the service has been deactivated, and to contact AT&T.
When I try to verify whether the phone has truly been unlocked by typing *#SIMLOCK# nothing happens. If I then push the CALL button, I then get the message: Connection problem or invalid MMI code.
Any clues what is going on?
Click to expand...
Click to collapse
The *#SIMLOCK# code does not work on newer phones so have to find another sim that you verified and works ok in another similar phone.Maybe aioWireless is not activated,does it work ok on other phones? Would recommend a tmobile sim ,because with that if the phone is unlocked then should connect to the network
hi guys,
have a nice day
please help and tell me how can i use a cdma sim card working on my samsung s4 sprint sphl720
,
because i had unlock the gsm card and make it work and now i need to unlock the cdma sim card to work
also i had to unlock the cdma and change spc to 000000 and confirmed with getmymsl program that the spc is 000000
also i add my country prl and the signal is good
the problem that when i put in the cdma sim card it doesn't work at all even on the cdma network or lte/cdma network and i don't know what should i do to make it work
my rom is 4.2 and my modem is mdl
my second question is how to add a language on the phone.
thanks and best regards
There is no cdma sim card. It is a cdma phone there is no sim for that. The sim card that is in the phone is for LTE and GSM.
hi friend thank you for your answer but there are cdma sim cards available in some countries except us.
and I know one of my friend use a cdma sim card in the s4 sprint and working good just like verizon phone . it accept cdma sim cards
but the problem I dont know if I should program first or unlock it first.
so I ask you guys to help to find the way to use cdma sim card on the phone.
thanks
I'm pretty sure cruise is right here... No such thing as a cdma sim card.
Sent from my SPH-L720 using xda app-developers app
I have read all the guides for unlocking the SIM for GSM networks. But What I'm trying to do is use my Sprint LG G2 LS980 on my Verizon Account.
I have gotten the unlock SML from Sprint for the device and I know both networks are CDMA, so I should be able to put in a Verizon Sim, enter unlock code, the BOOM! Have my Verizon plan.
But when I insert the Verizon SIM card into the phone it says "No SIM card - Emergency calls only"
Why wont it even detect that there is a SIM card in the device.
cloudedmemory000 said:
I have read all the guides for unlocking the SIM for GSM networks. But What I'm trying to do is use my Sprint LG G2 LS980 on my Verizon Account.
I have gotten the unlock SML from Sprint for the device and I know both networks are CDMA, so I should be able to put in a Verizon Sim, enter unlock code, the BOOM! Have my Verizon plan.
But when I insert the Verizon SIM card into the phone it says "No SIM card - Emergency calls only"
Why wont it even detect that there is a SIM card in the device.
Click to expand...
Click to collapse
It won't work anyway...the voice network is CDMA, meaning that the serial number needs to be whitelisted by Verizon for the device to work. Unlocking only works for GSM devices; you might be able to use it on AT&T or T-Mobile (3G mode) since the UMTS network should work there.
J.Max said:
It won't work anyway...the voice network is CDMA, meaning that the serial number needs to be whitelisted by Verizon for the device to work. Unlocking only works for GSM devices; you might be able to use it on AT&T or T-Mobile (3G mode) since the UMTS network should work there.
Click to expand...
Click to collapse
Call the new network now so you can port it from the old network
Bought this lg g6 as993 about a year ago, said it was unlocked. Used it on h2o wireless network (gsm) for a while, recently decided to switch to tello. When I put the new Sprint SIM card in my phone, the service never activated. I contacted the customer service and none of the activation techniques, including the carrier reset using ##72786# worked. They said my only option was to factory reset and that it was a problem with my phone, not with their service. Can someone please help me figure out why my phone that is compatible with gsm and CDMA is not working on a CDMA network?