Database Users

Bad 6.5 Flash. Bricked?

I was flashing ookba's Ozone 6.5 rom from http://forum.xda-developers.com/showthread.php?t=552887 and midway through it errored out and my phone won't boot now. I think I made it even worse because according to the tricolor bootloader, I still have SPL and not HardSPL. I can still bring up that screen fine but when I try a normal boot, it simply sits at the HTC logo screen. According to ookba's forum post there are no original ozone roms for vzw so does this mean that mine is bricked for good? :'(

Um i think there is a stock ozone rom up:
http://forum.xda-developers.com/showthread.php?t=550863

i tried to use the romupdate program with that verizon ozone rom but it won't work. it just sits there with 0% on both the computer and the phone until it errors out and i'm back where i started. do these ones still need hardspl to flash?

ur device wasnt ready to be flashed man..
if it didnt show : SPL-0.39.Hard, then u werent ready.
we said time and time again, even when the ROM was released that you needed to be sure that the above in bold was showing on your tri color screen.
sorry bro, but you now have a paper weight.

SoCalSpecialist said:
ur device wasnt ready to be flashed man..
if it didnt show : SPL-0.39.Hard, then u werent ready.
we said time and time again, even when the ROM was released that you needed to be sure that the above in bold was show on your tri color screen.
sorry bro, but you now have a paper weight.
Click to expand...
Click to collapse
:[ i assumed that when hardspl showed 100% without error that it had worked.

i feel ur pain bro..i bricked testing the SPL's for us. I have the insurance and im super cool with the REPS at my local store, so the swap out was quick and easy!
hopefully u signed up for the same and got the 6 buck insurance.

I'm in the same boat man... Hardspl flashed to 100% so I thought it was installed (I have no vision so I had no way of actually checking the boot screen...), and my phone is stuck at the htc screen after it vibrates...
I have the $8 insurance, but I'm scared to bring the phone to a verizon store for fear of THEM finding out. I'd much rather try and reflash a signed stock rom image.

If you have the insurance it doesn' matter.
Just call the insurance company and say you dropped it in the toilet.
Then drop it in the toilet !!!!

brent372 said:
If you have the insurance it doesn' matter.
Just call the insurance company and say you dropped it in the toilet.
Then drop it in the toilet !!!!
Click to expand...
Click to collapse
pretty much..dont go into details about what happened just tell them something as mentioned and u will have a new device at ur doorstep in about 24hrs!
one of the perks of paying the $6 or $8 dollar insurance.

just brought in the vzw store and they gave me a new one. currently running ookba's 6.5 rom on the new one

Bad Flash problem..
I had the same issue with HardSPL not completeing the install before attempting to Flash. Now my Ozone will to boot at all. My problem is that this is a company phone and they will be upset. How do I create a "gold card" to get it to take a ROM or has anyone located an official ROM that will load without HardSPL being in place?

richallen1 said:
I had the same issue with HardSPL not completeing the install before attempting to Flash. Now my Ozone will to boot at all. My problem is that this is a company phone and they will be upset. How do I create a "gold card" to get it to take a ROM or has anyone located an official ROM that will load without HardSPL being in place?
Click to expand...
Click to collapse
you could probably make a donation to jockeyw and talk to him about it if he's got the time.

richallen1 said:
I had the same issue with HardSPL not completeing the install before attempting to Flash. Now my Ozone will to boot at all. My problem is that this is a company phone and they will be upset. How do I create a "gold card" to get it to take a ROM or has anyone located an official ROM that will load without HardSPL being in place?
Click to expand...
Click to collapse
silly mistake on ur behalf, especially with a company device. As ive mentioned, i encourage ALL to read thru the ROM update and SPL thread's carefully, it saves a headache, and possibly ur job! and if ur still unsure, ask a question. The reason i say this and stick with it specifically in ur case, is because i recently had a co-worker get let go for bricking his Blackberry Tour that was supplied to him no more than 2 weeks ago. Again good dude, silly mistake.
Now i dont now much about it, but from what i understand a "gold card" as forementioned, is out of the question for an Ozone. I belive this was covered already in one of the ROM threads.

That's not good. I just bricked my THIRD Ozone guys. I flashed the hardspl and although my sd and sim cards were out it still didn't flash I think. I'm back where I was a month ago.
+, I activated my screen reader on the device. The screen reader uses your MEID and ESN to allow your license to be on the phone. If I were to take my ozone back (yet again), I would have to pay $200 to the company in order to have them "reset" my license in the system.
I am desperate for a signed rom. Can hardspl be flashed on somehow with the SD card?
:'(

My Rom was Wiped Out
hi,
missed to remove simcard,
tryed to to update with out hard SPL and my Phone Rom was wiped Out
now its boot and show HTC screen only
try to instal hard SPL after this and massage shows divice not connected
can u help me fix this now my fone is just a peper waigth use only
thanks in advance
[email protected]

another one bites the dust..
It seems the HARDSPL is not working for a high % of first time flashers.
It would make sense that this be taken care of. i would encourage any one who wants this to be fixed to make a donation and specify your wants and needs.
There is some confusion whether to sda unlock before running auto.bat and ruu hardspl.
it seems to me that the jumpspl is not correctly working so the hardspl is not working. the jumpspl sspl bypasses the security temporarily so that the RUU can flash the rom with hardspl. this is not completing correctly and bricking phones. Ill try to get new phone from local store tomorrow and retest process to see if i can come up with where problem lies.

its seems Good News
awaiting for your reply
Tanks

official at&t callerID update bricked my phone.. :(

after my phone rebooted once the update was complete, it wont get passed the "at&T World Phone" white screen... SOMEONE PLEASE HELP ME!!!! i was using a stock at&t pure with the stock rom. i can not upgrade hardspl or ANYTHING any suggestions on how to get my phone to boot? hard-reset went through with no signs of failure but it still will not boot up after that finishes... sorry if its something im overlQQKing, but i just cant figure it out. n yes i have researched although obviously not enough at this point. Thanks to anyone who can help in advance. forgive my stupidity!!!

......
noone?????

The HTC Pure updates hosed my phone too, I had already applied hard-spl to my Pure and i've flashed it with dozens of roms. Since I was currently using one of the "Stock" AT&T roms posted on XDA I figured I could apply the updates. Unfortunately after applying the update my phone froze at the boot loader. I was forced to flash my rom using the memory card method and then restore a backup.
you could try putting the phone in SSPL mode manually, (reset button+volume down), the run hard-spl hard-spl in manual mode.
you can then flash your rom using the memory card method. (FAT32 formated memory card, rom file renamed to topaz.nbh copied to root of flash card, reset button+volume down to enter SSPL, power button to confirm flash).
All this assumes you've already tried to hard reset your Pure (reset button+vol up+vol down)

Thanks for the reply! Unfortunatly, i tried the manual method and after it hanging at 0% for about 5 minutes, i keep getting error [262] update error.. (communications error) is this becuase i can not sync with mobile device center (win7)? I really dont want to just have to toss the phone! I have had an at&t tilt, at&t fuze, and now the at&t pure, and this is the only phone i have had this problem with for some reason...

Try Unplugging Your Pure From the computer Take Out the Battery Put the Battery Back in Mean While Restart your computer and Press Power And Volume Down At the Same time on your Pure If its on the colored screen your good,..Make sure your system is online and your not downloading anything and plug in your Pure to the computer it give it about 2 minutes to download the HTC USB driver then once its done your phone will say USB on the bottom of the Red Green Blue And White four color screen Then open up one of your ROM's and Flash it,....Do You Have Windows Mobile Device Center Installed?
If Not here is the Link
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If you do already you need to uninstall the Driver update for windows mobile media center then install it again .

i can get the bootloader screen just fine! i just can not get hardspl to flash onto it. it sits at 0% every time. the phone will not boot so i can NOT get into mobile device center. The tri-colored screen comes up with no problem and it says USB on the bottom, so the drivers are already installed. I even tried hard-reset and still no luck

There was an additional cab file I needed to install to HSPL the Pure
"enablerapinew.cab"
basically the machine just would fail to load the HSPL without it
but it still functioned afterwards, does yours?
Do a search on XDA find and DL the cab (or I could attach a zipped copy)
If you can still access the device,
just copy enablerapinew.cab to any temp dir on the device
the execute it through fileexplorer
then go back to installing the HSPL (mine then worked fine)
If you haven't already, You should go to
http://forum.xda-developers.com/showthread.php?t=520312
you'll find troubleshooting info and a link to the extra cab there
If you really are bricked at this point , it sounds like nothing has actually
been changed on your device yet? its just frozen should be still under warrentee? Unless anyone else has a better suggestion you should be
able to return it for exchange to ATT
Good Luck
KJL

It sounds like Windows is not properly recognizing your device when it is plugged into the USB port while in SSPL mode.
Have you tried different ports?
Is there another computer you can use?

another thought about returning under warranty
on the boot page of the stock Pure it indicates HSPL 1.83.000
After you update the HSPL it will say HSPL "1.83.Olinex"
this normally an indication of a successful update,
but it will probably void your warranty if they just look at the boot screen
This is true for all Pure (and Tmobile Compact V) Rom upgrades
The Stock Pure came with 6.5 and therefore the 1.83.00 HSPL
The Diamond2s did not, so their solution which reverts to 1.63 <?>
will not correctly revert to 1.83.00 on the Pure.
No way to correct this yet as far as I know,?
All the "reverts" are geared toward the Diamond2s, not the Pure.
But If your boot screen indicates 1.83.00 before it freezes
I'm fairly sure its still entitled to a warranty repair/replace
How could they tell the cause of the failure
was a reburn as opposed to natural causes?
Good Luck
KJL

When you put the phone into a manual bootloader mode... Mobile Device Center becomes obsolete.
HardSPL is only needed for unofficial roms. Forget HardSPL for the time being. The goal here is to get your phone operational. Just download the official HTC WM6.5 WWE rom and flash that. Put phone in manual bootloader mode and run the Rom installer.
As long as your phone is in bootloader mode and says "USB"... then your set to go.
Another solution is to try another PC. You'd be surprised how often that will resolve your issues. Perhaps find an XP machine and install Activesync (so it loads the bootloader USB drivers). I had to do that on several occasions when my main PC refused to flash my mobile device.

I did both of the updates htc has for the pure. Both worked fine. I am on the origianal rom. It does reboot your phone and stays on the white screen for a min then it loads the update and the phone starts.

The offical ROM comes back with a wrong vender ID error I guess cause its a "pure" and not the HTC branded "topaz"... NOW what should i do??? Seems like i NEED hardspl so i can flash any ROM, as from what i researched, there IS NO AT&T Pure rom that has been released. I still cant figure out why a hard-reset will not work though.... This is REALLY starting to get me angry!!!

Just for reference, the Pure's ID is TOPA210 32M
SPL-1.83.0000
The official hotfixes worked fine for me as well. Did you apply the hotfixes on the original ROM that came with your Pure?
Also, does the official HTC Touch Diamond 2 ROM work for you? If so, the hotfixes for the Pure are irrelevant, as are any future updates released for the Pure. You should look for updates for the Touch Diamond 2 on the Worldwide HTC site.
If you needed to do a warranty claim, the closest you can get to returning your phone to stock/shipped form is to use the ROM dump using HardSPL and hope they don't notice that the SPL is different. Currently, there's no way to return the Pure back to completely official software.
A hard reset simply wipes everything off and restores everything back to what is contained in just the ROM you currently have on it. If you've flashed your phone at all, you've already wiped out the original ROM that came with it.

It is still the STOCK ROM. I have never flashed it yet.. The topaz rom will not flash due to a vender ID error. The spl is still stock also... i think thats is why i am having this problem. I bought the phone off craigslist so returning it to AT&T is NOT an option either way. My only solution is to find a fix. (or trash it) I really appreciate all of your suggestions and input so far. You guys are by far the best board around! I am a LONG time follower, but a few-time poster. Obviously i have little to contribute to the board.

Can I trouble you to dig up a few version numbers? It'd help evaluate your situation so we can see which options are best for your case.
ROM version? You can find this in Device Information. Start --> Settings --> System --> Device Information
Bootloader version? Do a soft reset while holding down the volume down button on the side until a screen with red, green, blue, and white, ordered top to bottom, shows up. It should be the second line starting with "SPL-..."

The ROM is the STOCK AT&T ROM (again...) I CAN NOT go to start;.... because if you noticed in the first post, the phone will not boot past the white "AT&T WorldPhone" screen... the spl is stock also incase you missed that part. (1.33.0000) I have never flashed the divice. EVERYTHING IS HOW AT&T SELLS THE PURE OUT OF THE BOX! NO MODS. NO FLASHED ROMS. NO HardSPL... NOTHING! STOCK!!! (for those overlooking the details in my previous posts) I have no doubt you guys (n hopefully a few girls ) will help me fix my issue. I'm just REALLY anxious for it to happen sooner than later!

Have you tried downloading the official rom here on xda and renaming it to TOPAIMG.nbh and update using the sd card method?
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=600339
The download is in post #1

I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!

jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
You can flash hard SPL the same way by renaming the .nbh file to
TOPAIMG.nbh

jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
Actually that is supposed to be an officially signed rom. If that is true it will work with the stock spl. It will either work or it won't. Also, as stated in the response after yours, you can apply the hardspl via SD as well.

Bricked HD2 repair

Having my TMOUS HD2 bricked by using Task 29 and 2.09.51 radio, thus losing the warranty, how much does it cost to have it repaired by HTC? Do they even accept them for repair?

Does it even boot to the tri-color bootloader screen? If so, you can fix it (I think). If it is indeed dead, there are some posts describing brief, furtive encounters with a microwave... (wink-wink-nudge-nudge)...
Hope you get your device either fixed or replaced soon...

It is dead, no tri-color bootloader, nothing

does it turn on at all? stuck at the pink/white "stick together screen"?

alexsql said:
Having my TMOUS HD2 bricked by using Task 29 and 2.09.51 radio, thus losing the warranty, how much does it cost to have it repaired by HTC? Do they even accept them for repair?
Click to expand...
Click to collapse
Since it's less than 2 weeks since you got it, just take it to the T-Mobile store you got it from, and tell them that it just stopped working for no reason. I know it's bad thing to do, but it's better them than you right... I am sure they are prepared for the first set of devices to have some issues
Just be ignorant and tell them that you left the phone charging overnight and the next day morning, it just stopped working. They will just swap the device. Just make sure that you go to the store in-person to pick up the deivce. If you mail it in, they would dignose and probably know you have messed around with it.
I did the same thing with I flashed my device the next day it came out. I flashed a Custom ROM that had a non-compitable radio and it just did not boot. No bootloader mode.. nothing. NADA...
I called the store I got it from, he asked me to come by the next days since he was of all the devices and he was expecting a few the next day. I asked him to reserve one for me for the exchange for the damaged device. I went in the next day.. They just swapped the device. I actually told him to switch the battery from the new device to see if this one works, he said, it does not matter as he had send the whole device back anywayz..
So, good luck. Hope this helps.

Same as above for me except they had no devices left. Out of stock completely with no ETA. I got my refund and I'm back to being HD2'less.

I paid $172 to have me htc blueangel screen repaired if that helps.

alexsql said:
Having my TMOUS HD2 bricked by using Task 29 and 2.09.51 radio, thus losing the warranty, how much does it cost to have it repaired by HTC? Do they even accept them for repair?
Click to expand...
Click to collapse
Nothing to do with task 29, task 29 is safe. Radios with ..51.. are deadly.

Unfortunately some of the ROM's can be the kiss of death.
I can tell you that you have completely bricked the phone and they can't tell what ROM you have then you can probably get the warranty with HTC. If they discover you have a ROM it will be shipped back to you and they won't even fix it. It's a hit or miss with them.
I sent back one HTC HD with custom ROM and they didn't have a problem. I snet another one back and they declined due to custom ROM.
Just hope you get them on a good day

Fixing A Brick HD2
I will show you how to fix your hd2 from bad rom install that caused your phone to stay in the stick together screen. email me at [email protected] and I will send you the instructions to install your new rom.

balexander said:
I will show you how to fix your hd2 from bad rom install that caused your phone to stay in the stick together screen. email me at [email protected] and I will send you the instructions to install your new rom.
Click to expand...
Click to collapse
Is there something about your instructions that would prevent you from being able to post them here directly?

HELP!!!
I need help! I think i briked my device !! I flashed it with HSPL 3. and after that i've installed FLASH(RUU via PC)in the end of installation my HTC HD from Tmobile totally died- no sings of charging, no 3 color boot screen, pc can't find Qalcom cdma something driver and can't recognize the pone.This is a site i took a ROM from:
htcaddicts.com/?id=12
site is in hebrew, RUU called FLASH, it's an official rom of NEWPAN ver 1.48. Please help me to unbrick it!!!!!my mail ia : [email protected]
Thank you all, Cyril.

themenucha said:
I need help! I think i briked my device !! I flashed it with HSPL 3. and after that i've installed FLASH(RUU via PC)in the end of installation my HTC HD from Tmobile totally died- no sings of charging, no 3 color boot screen, pc can't find Qalcom cdma something driver and can't recognize the pone.This is a site i took a ROM from:
htcaddicts.com/?id=12
site is in hebrew, RUU called FLASH, it's an official rom of NEWPAN ver 1.48. Please help me to unbrick it!!!!!my mail ia : [email protected]
Thank you all, Cyril.
Click to expand...
Click to collapse
just answered in your thread.

You mean it's dead and there's nothing to do with it?
New CPU?
RAM discharge? SOMETHING????

themenucha said:
You mean it's dead and there's nothing to do with it?
New CPU?
RAM discharge? SOMETHING????
Click to expand...
Click to collapse
That's pretty much right....when you flash an incompatible radio to this phone (which that ROM has), that's the surest way to kill your HD2.
You can send it to HTC for repair, where they will likely tell you that you need a new mainboard (CPU, rom/ram, etc) and offer to charge you for it....usually very close to the price of just replacing the phone with a used one.

NEED HELP ASAP PlZ..i just installed the [ROM][WWE]★★★Astraios Roms★★★[REG/BUUF/GTX][23569][22nd July] to my HD2 i think i bricked the phone cause when i turn it on the Tmobile screen loads up but when it gets to the part where the ROM loads it freezes completly plz can someone give me a heads up on what to do.......

Yova809 said:
NEED HELP ASAP PlZ..i just installed the [ROM][WWE]★★★Astraios Roms★★★[REG/BUUF/GTX][23569][22nd July] to my HD2 i think i bricked the phone cause when i turn it on the Tmobile screen loads up but when it gets to the part where the ROM loads it freezes completly plz can someone give me a heads up on what to do.......
Click to expand...
Click to collapse
Can you get into bootloader mode then? Get there and flash a different ROM. Be sure it doesn't contain a .51 radio!

Please help me i did the same as
""I need help! I think i briked my device !! I flashed it with HSPL 3. and after that i've installed FLASH(RUU via PC)in the end of installation my HTC HD from Tmobile totally died- no sings of charging, no 3 color boot screen, pc can't find Qalcom cdma something driver and can't recognize the pone.This is a site i took a ROM from:
htcaddicts.com/?id=12
site is in hebrew, RUU called FLASH, it's an official rom of NEWPAN ver 1.48. Please help me to unbrick it!!!!!my mail ia : [email protected]
Thank you all, Cyril."""
samsamuel said:
just answered in your thread.
Click to expand...
Click to collapse

RGONZALES1Y said:
""I need help! I think i briked my device !! I flashed it with HSPL 3. and after that i've installed FLASH(RUU via PC)in the end of installation my HTC HD from Tmobile totally died- no sings of charging, no 3 color boot screen, pc can't find Qalcom cdma something driver and can't recognize the pone.This is a site i took a ROM from:
htcaddicts.com/?id=12
site is in hebrew, RUU called FLASH, it's an official rom of NEWPAN ver 1.48. Please help me to unbrick it!!!!!my mail ia : [email protected]
Thank you all, Cyril."""
Click to expand...
Click to collapse
bricked by the radio that rom contains.
sorry.

Got my HTC HD2 rooted and installed droid froyo and it worked for 2-3 weeks, and then suddenly after trying out a program from droid market, called photofun, it just froze, so I removed the battery and put it back in, and it is not coming up at all. Tried hard reset with the vol up/down+power with no luck. Completely dead, would not even go to the boot loader.
So if anyone is in same situation as I was, just search for htc repair in your local CL and I took mine to a local wireless store here and they're able to fix it somehow and cost me $50. Software issue they said.
There seems to be a way to fix a completely dead/bricked hd2, without having to replace the whole mobo, but cannot find any info online. Anyone would like to share please? In case I bricked my phone again or anyone else who bricked their phone.

HD2 stuck at white boot screen/ can't install Roms

Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.

flanders3 said:
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
Click to expand...
Click to collapse
What radio (if any) have you flashed? Check the ROM's dedicated thread you want to flash and see if the radio is compatible.
Im betting you've flashed the wrong radio

take the rom it was shipped with, name the nbh file to LEOIMG.nbh, copy it to your sd card and go into bootloader.
it will flash your old rom and should overwrite the old radio.
DN41

I installed Radio 2.06.51.07, which was recommended as far as I know.
I tried to install every "official" rom that I could find, but no matter if I apply them via SD card, USB or .exe, the install never finishes.
Tried to install just the OS without a radio and that worked, so I'm almost sure it is somehow radio related.
Now the problem is that I can't even send it to T-Mobile, because I there is no way to get rid of HSPL. BTW, it's the german T-Mobile we are talking about, not the US one. Is there a chance they won't notice the HSPL...?

so flash this one over sd-card: german t-mobile 1.72
what about performing hardreset? does the phone boot?
DN41

Tried flashing the TMO rom, but no luck either
Hard reset is strangly fast (only takes like 7 seconds) and only gives me a white screen after reboot. Apperently the HD2 shows me that HSPL is intsalled in the bootloader, but I can't change the SPL...
Already tried HSPL2, but no matter what option I choose, my bootloader always stays at 1.42 HSPL.
Edit: I would like to post pics of the error I get when flashing from the sd card or the bootloader screen, by the board rules don't want new users to post links.

djchubbs said:
Im betting you've flashed the wrong radio
Click to expand...
Click to collapse
any way to repiar radio side as flashed wrong radio ??
flanders3 said:
Tried flashing the TMO rom, but no luck either
Hard reset is strangly fast (only takes like 7 seconds) and only gives me a white screen after reboot. Apperently the HD2 shows me that HSPL is intsalled in the bootloader, but I can't change the SPL...
Already tried HSPL2, but no matter what option I choose, my bootloader always stays at 1.42 HSPL.
Edit: I would like to post pics of the error I get when flashing from the sd card or the bootloader screen, by the board rules don't want new users to post links.
Click to expand...
Click to collapse
same happen with me,,,

flanders3 said:
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
Click to expand...
Click to collapse
I have exactly the same problem.
I believe radio hardware of my HD2 has failed.
This is not related to flashing an incompatible radio, as I have flashed 1.66 official ROM about three months ago and had no problems until now.
I got the white screen, when phone was in my pocket.
Not possible to update radio, update fails with "Radio_V2 failed" and "Update Terminated".
Not possible to flash any rom, flashing fails when it comes to radio part.
MTTY didn't help as well.
I see no way but to send it back for repair.
Hope they dont realize HSPL, as it is also not possible to change SPL right now.

Hi everybody, i am facing the same issues with my knew HD2. The fact is that i received it yesterday, while trying to flsah ENERGY ROM ..i flashed also the radio .. now got the white screen with the HTC green logo, and no way to hard reset ... phone doesn't boot, can't do anything !!!!!! volume + and volume - doesn't work !!! any idea any solution ?? I am about to try flashing with the memory card but no idea if it will work, im not sure cause even the HSPL doenst appear ... anu idea ?

I've got the same problem
Mine is a Telstra (Australian) HD2, and I've been using it for about 3 weeks fine. Then a few days ago, I took it out of my pocket, and it's dead. With my one, most of the time I just get a blank screen (no HTC), and most of the time it's slightly yellow.
I'm having the exact same problems, and have done everything suggested on this page, and others. I can't send mine back either.
I'm guessing since no one's replied, there's not really a solution to this.
If it is a failed radio, I'm amazed how easily they fail, and how many people seem to have this problem.

I have the same problem today. Anybody help?

anakin621 said:
I have the same problem today. Anybody help?
Click to expand...
Click to collapse
i had the same problem with my Telstra T9193. i couldnt find any solutions so its on its way back to australia under warrenty.

I had a similar problem to this, though it appears I just fixed it. I can only imagine it's just a temporary fix though, as I previously managed to get it working and running Android only to white screen again the next day.
I did a hard reset and now it loaded the white HTC screen and nothing else. I tried installing a stock ROM from the MicroSD card and got the same "Update Terminated Update Fail" error because of the Radio. Retried the update about 3 times, and it eventually installed fine.

same here, i reloaded a stock from sd to relock it, which i highly recommend for anyone having this problem - in case it needs to go for repair and it just happens to boot..it took quite a few tries to have a proper flash and it booted only a few tries afterwards and then went back to only booting the white htc screen. so frustrating. and unfortunately for me it has to go back to australia for warrenty and will likely take ages to get back

I was stuck at multi color boot screen after hard reset. Tried multiple roms.
Solution: Use the 2.13 rom from here. Worked thankfully!
forum.xda-developers.com/showthread.php?t=655653

After being looooong on this forum, I finally got my first bricked HTC. I got all the same problems, white screen, no way to get HSPL gone, and no update via SD possible, no ROM update via USB in bootloader and no radio update possible...
Anybody knows how much it costs if I send it to HTC and they find yout it has been HSPL-ed?

Next with the bricked HD2
So definitely I´m in the same situation.. I have unusable SMARTPHONE!!
Even worse, because in my case i have no chance to send it to warranty repair - I was too disparate and curious so I opened my HD2 to look for an backup battery to erase everything that could have resist my countless tries to reflash, hardreset, flash RADIO, flash ROMs...
At the begging was the same (btw the same is still) : I took my phone and it did´t answer for waking it up. So I pressed red button to (soft)reset it. But it booted only to white screen (not the HTC one but "pure" withe w/o logo, w/o software info but with slightly yellow hue)
This was almost whole week ago... During that time I tried almost everything (I don´t have gold card - since I can´t get CID of any SD card I´m not able to have one and have installed HSPL 2.08 I´m ABLE to FLASH any ROM - even successfully reflashed cooked ROM via SD Card.!!) and the answer for me is probably some hardware problem....

-rr-obin said:
So definitely I´m in the same situation.. I have unusable SMARTPHONE!!
Even worse, because in my case i have no chance to send it to warranty repair - I was too disparate and curious so I opened my HD2 to look for an backup battery to erase everything that could have resist my countless tries to reflash, hardreset, flash RADIO, flash ROMs...
At the begging was the same (btw the same is still) : I took my phone and it did´t answer for waking it up. So I pressed red button to (soft)reset it. But it booted only to white screen (not the HTC one but "pure" withe w/o logo, w/o software info but with slightly yellow hue)
This was almost whole week ago... During that time I tried almost everything (I don´t have gold card - since I can´t get CID of any SD card I´m not able to have one and have installed HSPL 2.08 I´m ABLE to FLASH any ROM - even successfully reflashed cooked ROM via SD Card.!!) and the answer for me is probably some hardware problem....
Click to expand...
Click to collapse
I'm sorry, I just sent my to the repair center. Hope they will repair it under warranty. Otherwise it will cost me 100 Euro, just to find out I have to pay for the repairs. Then I can choose to let the device there (then I don't pay 100 euro) or let the device ship back (I pay 100 euro for a brick) or let them do the repairs which they will say how much it will cost on top of that 100 euro ..... stress ....

Birger said:
I'm sorry, I just sent my to the repair center. Hope they will repair it under warranty. Otherwise it will cost me 100 Euro, just to find out I have to pay for the repairs. Then I can choose to let the device there (then I don't pay 100 euro) or let the device ship back (I pay 100 euro for a brick) or let them do the repairs which they will say how much it will cost on top of that 100 euro ..... stress ....
Click to expand...
Click to collapse
Check this thread... unfortunately it wouldn´t be quite easy whith the service repair...
_JuSteR_ said:
...
With the radio bricked there are only two things you can try to do:
1- You can go on using your hd2 without updating the radio. Try to download a rom without radio and install it, or ask a cook to prepare a rom (you can try an official rom if you want to recover the original SPL) without radio for you.
2 - Do what I did and sell the phone as bricked, because there's no way to unbrick radio system. I tried to save my HD2 by recovering the original SPL and sending the phone to the htc customer service. I got the phone back after 2 months and it was still radio bricked
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=618084

upload a pix of your bootloader screen,I had similar kind of problem.I 've been through a lot of hardship dealing with the that.Maybe i could help u a bit.

[Q] bricked my hd2 but my computer recognizes it...?

so i flashed my phone with the wrong radio i believe but the strange thing is that my computer recognizes it. the doesnt turn on at all but i here the sound of a device being plugged in when i plug it into winodws. is there a chance its not bricked?

the sound doesn't necessarily indicate much.
what did you do? specifics, please?
can you get into bootloader?

i was trying to flash a stock rom and i guess it didnt work?

minnieman said:
i was trying to flash a stock rom and i guess it didnt work?
Click to expand...
Click to collapse
mate. as i said, specifics please. like what rom / type of phone do you have? what rom were you flashing? you said radio, now you say rom.
also, as i asked, can you get into bootloader?
please, if you want help, we need information.

minnieman said:
so i flashed my phone with the wrong radio i believe but the strange thing is that my computer recognizes it. the doesnt turn on at all but i here the sound of a device being plugged in when i plug it into winodws. is there a chance its not bricked?
Click to expand...
Click to collapse
You may try and follow this solution, I suggested earlier. Click here
Let us know if it worked.

sorry i was vague, i was in a rush to get to work this morning and on top of it i was panicking. i flashed the stock image:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i tried that on a hd2 so i could flash hspl3 again and use wp7 on my hd2.
i ended up just sending it in, but if they send it back with no repairs ill try your method... i relly hope they just send me a new one though. i mean... i flashed a stock image to the hd2, so shouldnt they see no hspl and just the stock spl?

again, more details are needed.
like what type of hd2 do you have? if it is a us tmo brand, i believe it is bricked (as you flashed a .51 radio.)
if you flashed your stock rom from your sd card, hspl is removed. if you flashed over usb, and did not uninstall hspl, hspl is still there.
what i don't get is if you can flash a rom, why are you saying it is bricked? no offense, but each post seems to change the story (first it was a rom, the a radio, now you are flashing roms but sending the phone in, still don't know if you can get into booloader, but now you sent the phone in or is it in your possession???) and i am not following what you did, where you started or what is going on. maybe i am totally missing what you are saying (which is possible)...hope someone can help you.

i have the 1024 us tmous hd2. i tried to flash to a stock rom, forget i said radio. i tried to flash the .51 which i did not know would brick my phone, so i played dumb with htc and sent it in to get repaired. if they dont repair it i am kinda SOL because i flashed using usb and they will see it has HSPL. sorry, do i need to include anything else? i am just kinda a noob... sorry.

i swear i posted a response. hmm.
thank you for the details. your assessment of the situation is spot on; unfortunately your phone is indeed bricked. and likely htc will not know about hspl...or so i have heard from others.
curious, why did you send it to htc? did tmobile reject it? if not, and htc doesn't give you a new one, try getting it to tmobile (under warranty)- worked for me when the phone stopped working for unknown reason. good luck.

possible to make it back to work...?
jsmccabe78 said:
i swear i posted a response. hmm.
thank you for the details. your assessment of the situation is spot on; unfortunately your phone is indeed bricked. and likely htc will not know about hspl...or so i have heard from others.
curious, why did you send it to htc? did tmobile reject it? if not, and htc doesn't give you a new one, try getting it to tmobile (under warranty)- worked for me when the phone stopped working for unknown reason. good luck.
Click to expand...
Click to collapse
here i am one of the ppl out there have the HD2 bricked.
I have tmo version, Couple months ago i was trying to flash a office rom, which is i don't remember which one, but i really sure it was a HTC Office Rom., I let the phone do it thing while flashing, but after the flashing the screen go off and didn't back on working anymore, I still have the bricked phone though, and i was wondering if any possible method apply to the above problem?
i will looking forward to hear from u, Thank U,

chhada said:
here i am one of the ppl out there have the HD2 bricked.
I have tmo version, Couple months ago i was trying to flash a office rom, which is i don't remember which one, but i really sure it was a HTC Office Rom., I let the phone do it thing while flashing, but after the flashing the screen go off and didn't back on working anymore, I still have the bricked phone though, and i was wondering if any possible method apply to the above problem?
i will looking forward to hear from u, Thank U,
Click to expand...
Click to collapse
Were you able to get into bootloader Chhada?

nicedude_abad said:
Were you able to get into bootloader Chhada?
Click to expand...
Click to collapse
no dude, nothing respond with the power button, *_* it doesn't do anything,

headache
man this could be very tiring ive tryed everything from hard soft chilled any kind reset.volume down red green white button hold down but one thing is weird is when i connect it to the pc wiht the thing off it makes a sound like it sees it but no luck with tmobile rom update. ill send to tmobile and play the good guy http://media.xda-developers.com/images/smilies/confused.gif