Database Users

HSPL Back to original SPL anyone succeed it ?

Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...

Did you try to install the ROM from HTC website or did you find an Orange specific ROM?

It is an orange specific rom. cause it is a branded handy.
I even try from HTC website one but no satisfaction. I think it is normal by this one ?

I have a non branded "german" device.
I decided to go back from the HSPL to the stock SPL.
I wanted to flash with the Turkey 1.61 rom to have after this procedure the newest radio 2.07 on it.
I have followed the steps from bepe
But my SD card has a "goldcard" file on it.
Go to the HSPL thread and see my post #383
http://forum.xda-developers.com/showthread.php?t=611433
I have noted down all outputs during flashing.
At least I would give it a try and use a "Goldcard" to get back your original rom.
Hope it helps & Good luck!
dingolino
doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse

In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.

doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse
SD card should be formated FAT32. The original one is FAT16

What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
tictac0566 said:
In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.
Click to expand...
Click to collapse

doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?

doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?

yes confirm
tictac0566 said:
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?
Click to expand...
Click to collapse
I confirm: it happends to me: when I flashed the 1.61 HTC official rom from my SD, it replace the HSPL by the original SPL of HTC.

hi all, just want to share..
stock spl is 1.42 and after hspl 1.42hspl or 1.42.6666 if i'm not mistaken.
if to unsintall this hspl, i use flash using sd card method and it will re write radio and spl back to 1.42.
i also using turkey stock rom, but we cannot flash turkey stock rom using sd card method as it will rewrite spl and will give you error. wrong region. if this happen, in 3 colour mode, run you hspl. when it restart, make sure you push volume down button to get back in tricolour mode. if you not pushing vol down button, it will also boot in tricolour but hspl wont work, happen to me, spl back to 1.42.000. the flash using custom ruu.
just sharing with you guys.

Steve0007 said:
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?
Click to expand...
Click to collapse
It should be LEOIMG.nbh.

dont forget you might want to use MTTY to do task29 to format the device instead of CustomRUU.exe
tbh you can probably use the RUU from HTC if you have HSPL anyway.
p.s. yeah LEOIMG.nbh - LEOING.nbg made me smile - finger-twister

Okay I have tested restoring SPL1.42.0000 on a vendor-id'd phone.
Tried 2 ways of formatting the SD card:
a. formatting the sd card to FAT32 via Diskdrive mode connected to pc
b. Formatted in HD2 using onboard utility in HD2.
Tried 2 images but not the vendor-id image since I do not have that image.
a. Vendor ROM but in different language
b. Stock ROM HTC
Tried 2 ways of changing SPL back to 1.42.0000
a. Reset + vol down shows a 1 second message "Checking.", after that it immediately goes to the blue-green-red bootscreen showing bootloader 1.42.HSPL
b. From bootloader connect USB to pc and flash using stock RUU.
All combinations of above I can not restore SPL. Must be because HD2 requires correct ROM image + correct vendor-id.
Is there possibly a way to remove HSPL in some way without the original vendor image? Goldcard?

Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look

[★] said:
Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look
Click to expand...
Click to collapse
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet

htc12345 said:
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet
Click to expand...
Click to collapse
Oh sorry man

Goldcard also tried and no luck.
Every time I reboot to bootloader it gives the colored screen, proceeds to white screen with blue letters, in an instant shows: "Loading..." ..followed by: "Checking..." ..and then returns to colored bootloader main screen.
edit:
I keep thinking whether it is normal or not that the white screen doesn't show any kind of confirmation that it did actually find any nbh file whether it is valid or not. Maybe it just exits when the nbh is not valid, that may be the case.
However I have now ran the routine a whole lot of times and make zero progress.
Maybe better continue the search for the correct ROM to flash with.

just try one of the official roms posted in the official roms thread. don't try 1.61 - only 1.43/48

I have tried all official roms posted including 1.43 and 1.48 and up without success. The bootloader wouldn't go further after having checked the SD card contents. It did not work at all.
Finally now I bricked (I hope temporarily) my HD2 by trying to install the latest official 2.02 from the RUU.
Strange things have happened here.
I had earlier copied an 148 or so nbh to sd card. Bootloader would't work out as explained in posts above. So after all (with card with 148 nbh still inside) I figured it was time to check what ROM 2.02 would do, since I believe it would overwrite all SPL including HSPL since it is a v2 SPL. At least I hoped.
When I opened the RUU, it did reboot the phone as it is supposed to do with RUU.
Few things happened:
a. The phone booted in bootloader and showed me the white step screen which indicated there was a nbh about to be flashed. This was the nbh on the card!
b. The RUU errored with error 260 that the connection was lost. I have never lost a connection, must be because file on sd card took control.
c. Since connection was lost and the phone wanted a flash from the sd card I pressed vol up to continue update. it did start updating... but at about 9% I got a big triangle /exclamation mark, and HD2 stopped updating.
Reboot. Guess what??? SPL 1.42.0000 in bootloader now. From the nbh on the card.
But NO boot, NO radio .... After all I managed to destroy phone and HSPL.
Had to goldcard my way back in. However, problem solved!

Cannot downgrade from 2.07 tmus stock rom

Please help... I installed RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed and im trying now to downgrade to 1.43 and 1.66 stock rom to reinstall hspl and my hd2 stucks in the black htc screen at 0%. I tried both usb and goldcard sd way. Any ideas?

notisz said:
Please help... I installed RUU_Leo_1_5_TMOUS_2.07.531.6_Radio_Signed and im trying now to downgrade to 1.43 and 1.66 stock rom to reinstall hspl and my hd2 stucks in the black htc screen at 0%. I tried both usb and goldcard sd way. Any ideas?
Click to expand...
Click to collapse
Did you flash it from a storage card? Otherwise hspl could't be removed, right?
Looks like you have to consult this thread for a possible solution.
BTW, just wondering, can one flash the new test rom the hspl way from a usb connected pc?

appelflap said:
Did you flash it from a storage card? Otherwise hspl could't be removed, right?
Looks like you have to consult this thread for a possible solution.
BTW, just wondering, can one flash the new test rom the hspl way from a usb connected pc?
Click to expand...
Click to collapse
I used both method.
Flashed with usb having HSPL
Flashed with goldcard using SDcard (to have the new SPL)

sigh.. another that 'bite the dust'.
hopefully the other thread's thread starter can really put a note in his thread to alert people that this is not yet another rom that can be flashed and re-flashed by other roms!

zenkinz said:
sigh.. another that 'bite the dust'.
hopefully the other thread's thread starter can really put a note in his thread to alert people that this is not yet another rom that can be flashed and re-flashed by other roms!
Click to expand...
Click to collapse
did it... just realized it myself and was searching for a solution...
so we have to wait for hspl 2...

Have you tried Flashing 2.02 using Goldcard + SDcard??
2.02 requiers his own spl 2.0
I think this could be a option.
Flash 2.02 Goldcard-SDcard
Flash 1.66
Flash HSPL
Havn't tested it yet tho.
Anyone dare to test it?
If it fails, I think you can flashback the 2.07 rom.

doesn't work
via sd card it sits on loading, so doesn't appear to recognize the card. if that's so then goldcard wont work.
ill play some more later with formatting the card again, but i think ideally what we need is something to kick in before the spl, in the same way the sspl does.

Gonna download RUU_Leo_Vodafone_UK_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50.22_2_Ship.exe and copy the rom to my sd card see if I have any luck with that as it is the version my device shipped with.
I didn't change the first 2 digits of my serial to 00 so I am not sure my gold card will work and can't find anywhere to get a new gold card at the moment.

fards said:
doesn't work
via sd card it sits on loading, so doesn't appear to recognize the card. if that's so then goldcard wont work.
ill play some more later with formatting the card again, but i think ideally what we need is something to kick in before the spl, in the same way the sspl does.
Click to expand...
Click to collapse
Did you have any luck?
I am stuck with this rom... but at least its fast and stable...
reactivated footprints(working) and ereader tab...

ctman said:
Did you have any luck?
I am stuck with this rom... but at least its fast and stable...
reactivated footprints(working) and ereader tab...
Click to expand...
Click to collapse
it's probably a goldcard issue.
Since the new spl, the device name and ID had changed, so now the goldcard for the HD2 doesn't work... Now we need goldcard for the new name/id...

don't think it is goldcard unfortunately

Just some noobies taughts about this please don't kill me.
Could it be possible that 2.07 SPL is on another position and therefore it avoids to flash back to a earlier SPL because the adres is different?
fards said:
doesn't work
via sd card it sits on loading, so doesn't appear to recognize the card. if that's so then goldcard wont work.
ill play some more later with formatting the card again, but i think ideally what we need is something to kick in before the spl, in the same way the sspl does.
Click to expand...
Click to collapse

Laurentius26 said:
Just some noobies taughts about this please don't kill me.
Could it be possible that 2.07 SPL is on another position and therefore it avoids to flash back to a earlier SPL because the adres is different?
Click to expand...
Click to collapse
hmm... at least its the best explanation...
am still stuck with the 2.07 rom...
and have found a maior iswsue.. sometimes when im using the internet... and the connection changes to edge or lower... (happens in trains) its not able to call me
this happend in other cooked roms when i deactivated 3g...

Laurentius26 said:
Just some noobies taughts about this please don't kill me.
Could it be possible that 2.07 SPL is on another position and therefore it avoids to flash back to a earlier SPL because the adres is different?
Click to expand...
Click to collapse
don't think it's that, but we can't discount anything till we work out what they've done..
Cotulla said it may be that HTC have plugged some holes and decided to restrict downgrading. That makes sense to me, but I wish I could think of a way around it (that I could manage), it's way above my level as well
It is possible to reflash the 207 using goldcard (so it's not the goldcard) so it's likely we can go up with the spl numbers with the newer roms if wanted.
I'm hoping that they decide to release 2xx based roms for the rest of the world after the tmous HD2 is out; doubtful but we can hope!

htc hd2 dead after flash

hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem

friendjabi said:
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
Click to expand...
Click to collapse
you will brick your T-Mobile HD2 with this ROM. this is not a compatible ROM for the T-Mobile HD2.
see if this will help you
http://forum.xda-developers.com/showthread.php?t=668347

friendjabi said:
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
Click to expand...
Click to collapse
that radio has killed it. You cant get into bootloader, so the above wont help.
Unlucky.

samsamuel said:
that radio has killed it. You cant get into bootloader, so the above wont help.
Unlucky.
Click to expand...
Click to collapse
It's not that its about luck is about reading which ROM is compatible.
Sorry about your brick.
Kenichi

Thats why its always important to read the stickies and the 'for noobs' postings before flashing. They stress it so many times but yet there's always someone who just doesnt read. Or if they do read they dont understand and flash anyway.
Preaching wont help you any now.
Try contacting HTC and see what they say.

Kenchi* said:
It's not that its about luck is about reading which ROM is compatible.
Kenichi
Click to expand...
Click to collapse
words to live by

Lets cut this guy a small break... based on his relatively poor spelling and grammar i don't think he can even read English. It's amazing how he got it to flash in the first place.....

That was a funny one

no have to do with read english i dont not english and i flash everything and i have android on my hd2

I had the same thing happen to me. I downloaded hspl but didnt notice that there was a difference between the leo and tmousa roms. Anyway i installed a rom and it bricked my phone. I have HSPL 2.08 installed. Does this mean i can just retry a different tmousa rom (by sd card or usb??) and im ok?
Or am i screwed too and have to go to a early version?

icexclusive said:
I had the same thing happen to me. I downloaded hspl but didnt notice that there was a difference between the leo and tmousa roms. Anyway i installed a rom and it bricked my phone. I have HSPL 2.08 installed. Does this mean i can just retry a different tmousa rom (by sd card or usb??) and im ok?
Or am i screwed too and have to go to a early version?
Click to expand...
Click to collapse
if you just flashed a rom, you are fine. Boot into bootloader, and flash a compatible rom. Its only radios that kill the tmous, and most custom roms dont include a radio. Its mainly the non tmous official roms you need to avoid.

so basically thats what ive been doing. i put a nbh file into a sd card and load bootloader. It doesnt seem to do anything. I found on you tube that i have to rename the file to leoimg.nbh?
do i have to do this or do i just throw a compatible nbh file and it should autoload in bootloader. Also is there a way to install 2.13.xxx the lastest tmobile stock rom from bootloader? All the ones i have been able to find are in .exe format and want me to have my device be active synced. I tried putting those on a sd card and flashing like that but i didnt do anything.

the funny thing was i really did try to flash a radio from a leo at first but it did not work after 5 attempts. Then the chucky rom finally did the trick.
Now i cant seem to flash from sd card. I dont think i know the process.

no need to flash from sd card, just go into bootloader, plug in teh usb, wait for 'serial' to become 'usb', run customruu on teh pc.
Whilst in bootloader,. check what it says next to 'spl', the number there should end '.hspl' and not '.0000'

damn im trying to install the nibbey rom but it doesnt work. I got it to go to 7% max one time and now its always 0% when i retry. I put the leo_customruu in the same folder as the nibbey nbh. and then start the customruu! is this the correct procedure?

samsamuel said:
no need to flash from sd card, just go into bootloader, plug in teh usb, wait for 'serial' to become 'usb', run customruu on teh pc.
Whilst in bootloader,. check what it says next to 'spl', the number there should end '.hspl' and not '.0000'
Click to expand...
Click to collapse
Yes it says hspl not 0000. Also i think my batter is below 50 percent now with no way to charge it. im starting to be believe that might be the reason it stopped at 7 percent and now the more i retry i get 0%.
also i am not able to get a active sync connection anymore with my device stuck in hspl bootloader. So the whole usb rom flash fails every time. Someone help i need my phone tomorrow.

i got it fixed! turns out i needed a 2gb sd card and it worked perfectly to install a custom rom.

I will buy your brick from you dude.

[Q] A Challenge for anyone who's up for it

My sincere apologies if this has been posted elsewhere (i can't find a thing and been looking all morning!).
I've ballsed up my HD2. Basically i tried to run sd card dual boot android thingy last night. Radio didn't upgrade as it should have and so anfroid didn't work either. So...today I tried downgrading SPL from 3.033 to 2.08.0000 so i could upgrade radio to be compatiable. To cut a long story short I used the downgrading post to do it and now i have upgrade rom error please try again. One positive note though....stuck on a lovely red green, blue and white screen (bootloader me thinks?) with spl showing as 2.08.0000.
Now....I thought i was slightly above average in terms of genereal public geeky know-how but this has certainly humbled me. I've been through the O SH*T I've bricked it (both me and the phone) and through dam....my wife will kill me, i'm now at denial thinking it will magically sort it self out (which it won't).
So please, apologies for the essay....can some help me out. Please go slow as I really can't do things without step my step instructions.
In a nutshell: can't get past bootlaoder and i wanna go for a poo because of it.
HELP!
Smiley

I have no idea about HD2 but most smartphones would have a recovery option in its PC software suite. Try that if all else fails.

nibras_reeza said:
I have no idea about HD2 but most smartphones would have a recovery option in its PC software suite. Try that if all else fails.
Click to expand...
Click to collapse
I'm not sure that would work, plus i don't think I've got the disc (had hd2 for 18months now).
It says:
HX-BC
SPL-2.08 0000 8G XE
MicroP (LED) 0x05
MicroP(TOUCH) 0x30
Tried loading standard rom from htc site but after 1% it crashes.
Crashing your phone is definitely a cure for constipation!

HELP!!! Anyone? Tried HSPL and it didn't work, still stuck at bootloader. Have a bricked it?

You flashed the stock 2.08 SPL instead of Hard SPL. That is why it will not let you load another ROM.

Wil Badger said:
You flashed the stock 2.08 SPL instead of Hard SPL. That is why it will not let you load another ROM.
Click to expand...
Click to collapse
Thanks for replying but, pardon my ignorance (i'm not very good at this stuff), how do I resolve this issue? is stock ROM the one that comes with the phone? I've ried putting different SPL through HSPL but stays at 2.08. What am I doing wrong?
thanks in advance

SMILEYSINGH said:
Thanks for replying but, pardon my ignorance (i'm not very good at this stuff), how do I resolve this issue? is stock ROM the one that comes with the phone? I've ried putting different SPL through HSPL but stays at 2.08. What am I doing wrong?
thanks in advance
Click to expand...
Click to collapse
The SPL you put on there is stock, meaning locked so you cannot flash custom ROMs.
You need to run HSPL4 again, and flash HSPL 2.08 NOT SPL-2.08 0000.
THEN you can flash whatever the hell you want
Don't flash HSPL 3.03 unless you plan to just use a 3.14 based windows mobile ROM.

just tried that and it stops half way through process and put spl 20.8 0000 on it even though i asked for HSPL. whats wrong with it? any ideas? again, i appreciate your help. is this anything to do with radio (????what is radio??? lol)

now all hspl does is not do as i say, whatever i pick whether it be 2.08 stock and 2.08 hspl (or their 3.03 counterparts) it show spl of 2.08.0000.
to be honest i just want my trusty winmo back so i can make calls, to hell with android (for the moment lol)

Is it regular or tmous?
Regular - 2.x spls arent stock for regular, only tmous uses 2.x as stock, so that may be havjng an effect, though it shouldn't,,,,,
Run hspl2 (note that's hspl2) and choose 1.66.0000
If that takes ok, then go to htc.com and find a rom that your serial allows you to download and flash it.
Tmous - get latest rom from t-mobile.com and flash that. If usb flashing doesn't take try sd card flash.
In both cases if still no luck, try goldcard, pm me an emaik address and your cid and I'll make you one.
You could also try the "chill phone in bag in fridge for half hour before flashing" trick, which if it works means you have overheating issues.
Spl - any spl ending 0000 is a factory spl andwill not allow flashing except that phones stock rom.

just pmed you, dunno if i did it right, hopefully you got it. Unfortunatley hspl2 didn't work either, still 2.08.0000 on there. Can i work with this in any way? ie can i load another rom on rather than revert back to htc rom if it easier? This all began with wanting dual boot android/winmo but its gone belly up lol, still i suppose there are ppl that have bricked phones whch are worse off.
I don't even know how to load another rom! i'm the noob of noobs!

From PM
SMILEYSINGH said:
I'm afraid that hspl2 didn't sort it out either, still shows spl 2.08 0000. Although it does say successful, when booting up it says failed and reverts back to bootloader. Should i be pressing any buttons while it boots up (i'm not - only vol down key when i need usb port to work).
Could i have a goldcard please? What is a goldcad and how do i use it? I haven't a clie as you can see. MY email is ***********.
I really appreciate your time, I understand you must be busy.
Thanks again
Smiley
Click to expand...
Click to collapse
ah i was afraid of it not working, , next i would suggest try hspl4, choosing 3.03.hspl or 3.03.0000, though again, i suspect the same thing,,, no change.
No real answer as to why it does that, i suspect a bad nand (memory) block, perhaps some memory flag that needs to be set but gets corrupted, , or something.
All i can suggest is trying hspl2,3 and 4 to try and change the spl to anything, , you have a regular hd2, so theres no problem, it should take any spl.
Goldcard is basically a magic sd card that makes the phone think it is in the factory, and lets you flash any STOCK rom from any region and carrier, and the phone will accept it as its correct rom. You can make them from any 4gb or smaller sd card, but i need teh CID (unique serial) of that sd card to send you the image which you write to the disk.
Problem is, getting the CID, , if you have another windows mobile phone you can use for 5 minutes that takes sd cards) then you are laughing, if you don't then you may be in trouble (although again, this is pretty unlikely to work if you really do have the stuck spl/radio problem, so if you cant make a goldcard dont lose any sleep)
Anyway, if you can get hold of a running winmo phone and connect it to your pc, then have a read HERE
http://samsamuel.co.uk/news.php?id=8
If you cant get hold of a winmo phone, then you will have to google on how to find sd cid without winmo phone, , , ,get ready for an evenings reading and frustration!

SMILEYSINGH said:
Can i work with this in any way? ie can i load another rom on rather than revert back to htc rom if it easier?
Click to expand...
Click to collapse
No, only stock roms will flash on 0000 spl's.
your phone, if acting normally, should always take the correct stock rom, but i have myself had issues flashing a correct stock rom when i left spl as 2.08.0000, until i downgraded to spl 1.66.0000, however the dowbgrade worked, whereas yours isnt taking.
As for which rom should always flash, go HERE and the second one down is t mo UK. If your serial gets rejected when you try to dfownload it, then its not the correct rom for that phone.
Download that, and rename teh file from filename.exe to filename.zip, then open the zip, inside is a bunch of files, one is called RUU_signed.nbh, extract that and rename it to leoimg.nbh and put it on your sd card (4gb or smaller, formatted FAT32) and reboot your phone into bootloader, where it should start to flash.

thanks for all your help.
At the moment its stuck on loading...has been for 15min, i think i'll reset it. I did manage to get it on another spl earlier this afternoon but it was 3.03 and i didn't think that was any good for me so changed it back. i'll keep trying to get a hspl on it, i take it that after that i can put any rom on it (cooked).
I'll try my wife's touch and see if i can make a goldcard.
Thanks again, let you know what happens.

jusr reset it and spl 1.66 is on there but only flashes up for a second before a white loading scren comes up. reset it a few times after that and still no joy. htc rom won't connect to it!

its working! the sd card was still in the phone and i had put something on there this morning (think it was a radio or something which caused loading screen to occur) windows just lkoadiong now, hopefully it will work. I'm still up for android dual booth tho lol. if this all works then i think i might wait. Samsamuel, i really appreciate your help in all this!
Thanks again!
Smiley
ps anyone readinf this...if in doubt just keep trying hsdp until u can do it in ur sleep, i must have done it 50 times today

Ah yea, leaving an inage on the card,,, bet you don't make that mistake again, hehe.

[Q] Possibly burnt HD2 - Cannot re-flash radio, magldr or task29

Hello people, I have been going through threads and threads regarding similar problems, but having tried and failed with so many strategies, I will have to bother you all.
So the thing is I was using a CM Jellytime MOD (data on ext) in my HD2, and having frequent hangs and freezes that I thought were linked to LCD malfunction, so I ordered a new screen and digitizer to see if I could save the device. Unluckily, just before these arrived, the HD2 suffered one final freeze, after which every soft reset would give the white blank screen and nothing else. I thought that maybe I should task29 the device and re install the ROM. The bootloader can be still accessed and I re-flashed HSPL with no problems.
But I cannot get to Magldr, as you can imagine, as there is no way to go through the white blank screen. Every time I try to re-flash either the radio (2.15.50.xx), Magldr, or even task29, I get "update errors", and no changes. I tried both using the specific utilities or the NANDtoolkit, to no avail.
I even tried MTTY, which seemed to go well, but did not bring any changes to the situation. It is still the same.
This is my bootloader screen:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
CotullaHSPL 0x05
0x30
Any other info that you think may help I will post it ASAP.
I have read that maybe the NAND has finally died, but I'm not sure and would not abandon the cause without some feedback. Can someone help with this? I will greatly appreciate, I live in Argentina and I don't think I will be able to get another smartphone (I got this one from a good friend who bought himself another one) right now, or ever
If I'm lucky I may be able to sell the LCD and touchscreen replacement, ha.
Thank you all!
pd: sorry if I posted in the wrong thread but I was really confused with the whole subforum arrangement. I moderate a forum and I am aware of how painful it is to start moving threads around.

@leandrox :i recommend removing the sd-card if present, flashing hspl 2.08 again.
Then, flash radio 2.15.50 (even if you tried before, try again now). if that was successful, reflashing magldr should be the success.
Or else...
Also, try putting your hd2 in a freezer, sometimes there may be overheating problems from what i used to see

gilbert32 said:
@leandrox :i recommend removing the sd-card if present, flashing hspl 2.08 again.
Then, flash radio 2.15.50 (even if you tried before, try again now). if that was successful, reflashing magldr should be the success.
Or else...
Also, try putting your hd2 in a freezer, sometimes there may be overheating problems from what i used to see
Click to expand...
Click to collapse
Hello @Gilbert, thanks for helping with this.
I have tried each flash with the SD and the SIM out, as I have read around about both interfering with flashing. So I guess that's not the problem.
I will try the "pre-cooling method" and tell you how it goes.
Is there any chance I should remove HSPL before re-flashing it? Also, does the battery charge while connected in bootloader mode? Because I am afraid I will finally run out of power througout the try and error processes.
Thanks again.

leandrox said:
Hello @Gilbert, thanks for helping with this.
I have tried each flash with the SD and the SIM out, as I have read around about both interfering with flashing. So I guess that's not the problem.
I will try the "pre-cooling method" and tell you how it goes.
Is there any chance I should remove HSPL before re-flashing it? Also, does the battery charge while connected in bootloader mode? Because I am afraid I will finally run out of power througout the try and error processes.
Thanks again.
Click to expand...
Click to collapse
not sure about removing hspl... you can try that tho. as for battery, you're probably right. there's a possibility it runs out of power.
did you try flashing stock rom from sd or usb? (emphasizing on sd method)

gilbert32 said:
did you try flashing stock rom from sd or usb? (emphasizing on sd method)
Click to expand...
Click to collapse
I guess that would be the next wise step (and I'll do it with the right pre-cooling in the freezer).
Correct me if I'm wrong:
- I need a FAT32 (?) formatted SD.
- Then copy the official nbh to the root of the SD, renamed as "leoimg.nbh". (still looking for the correct download; maybe here o here?)
- Enter bootloader screen, with the SD on. After a little while, it should read "loadng" and the flashing can begin.
After this, hopefully, has worked, I should be able to:
- Reflash HSPL 2.08
- Reflash latest radio if needed.
- Reflash Magldr and Clk
- Install new Android ROM
... but I'm looking way ahead my actual hopes
EDIT: I could not download the ROM from any of the quoted sites. Maybe someone can indicate to me the right ROM from this list: http://shipped-roms.com/index.php?category=windows mobile&model=Leo
My model is the 576 RAM one.

leandrox said:
I guess that would be the next wise step (and I'll do it with the right pre-cooling in the freezer).
Correct me if I'm wrong:
- I need a FAT32 (?) formatted SD.
- Then copy the official nbh to the root of the SD, renamed as "leoimg.nbh". (still looking for the correct download; maybe here o here?)
- Enter bootloader screen, with the SD on. After a little while, it should read "loadng" and the flashing can begin.
After this, hopefully, has worked, I should be able to:
- Reflash HSPL 2.08
- Reflash latest radio if needed.
- Reflash Magldr and Clk
- Install new Android ROM
... but I'm looking way ahead my actual hopes
Click to expand...
Click to collapse
Correct. don't forget that the sd should be between 1 and 8 gb in size (that's what i remember, larger sizes could do weird stuff)

gilbert32 said:
Correct. don't forget that the sd should be between 1 and 8 gb in size (that's what i remember, larger sizes could do weird stuff)
Click to expand...
Click to collapse
Thanks Gilbert! now I have work for this evening. Tomorrow morning I'll let you know how it went.
But I could not download the ROM from any of the two sites I quoted above. Maybe you can help me choose the right ROM from this list: http://forum.xda-developers.com/showpost.php?p=46839373&postcount=837
My model is the 576 RAM one.

leandrox said:
Thanks Gilbert! now I have work for this evening. Tomorrow morning I'll let you know how it went.
But I could not download the ROM from any of the two sites I quoted above. Maybe you can help me choose the right ROM from this list: http://forum.xda-developers.com/showpost.php?p=46839373&postcount=837
My model is the 576 RAM one.
Click to expand...
Click to collapse
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe this is the one i used IIRC

Ok @Gilbert, here's the update. No good news so far.
I tried flasing the mentioned official ROM from SD card and I get the "Update terminate / Update failed" message when installing. I also tried with a custom RUU but I got the same message.
I have been reading this thread where some guy apparently had the same problem and fixed it:
"After that I made a new goldcard using Duttys Leo Sense 2.5 Multi-Lang. "
http://forum.xda-developers.com/showpost.php?p=5384679&postcount=68
but I cannot understand what this actually means. I downloaded the mentioned Dutty ROM but it is a cab file that I don't know how to flash to the HD2.
I still have a tiny hope that the phone may actually come back to life. Again, thanks a lot for helping!

leandrox said:
Ok @Gilbert, here's the update. No good news so far.
I tried flasing the mentioned official ROM from SD card and I get the "Update terminate / Update failed" message when installing. I also tried with a custom RUU but I got the same message.
I have been reading this thread where some guy apparently had the same problem and fixed it:
"After that I made a new goldcard using Duttys Leo Sense 2.5 Multi-Lang. "
http://forum.xda-developers.com/showpost.php?p=5384679&postcount=68
but I cannot understand what this actually means. I downloaded the mentioned Dutty ROM but it is a cab file that I don't know how to flash to the HD2.
I still have a tiny hope that the phone may actually come back to life. Again, thanks a lot for helping!
Click to expand...
Click to collapse
then, try making a goldcard, and flashing a stock .nbh
for info about creating a goldcard, you should google it, i did recently and it was a bit harder then first time i did it (3 years ago)

gilbert32 said:
then, try making a goldcard, and flashing a stock .nbh
for info about creating a goldcard, you should google it, i did recently and it was a bit harder then first time i did it (3 years ago)
Click to expand...
Click to collapse
OK. Back to work then.
I will follow this tutorial. But I see I need an ActiveSync/MobileDeviceCenter connection. I don't think you can do that when you have no OS on the phone, right? Can I do this while in the bootloader?
Should I take any additional precautions attempting the process from W8-x64?
EDIT: It seems I need another phone to put the microSD on so I can get the correct CID with RevSkills (apparently you need the device to be connected through the MobileDeviceCenter or it fails). Then I may be able to ask someone else to get me a goldcard for said CID.

leandrox said:
OK. Back to work then.
I will follow this tutorial. But I see I need an ActiveSync/MobileDeviceCenter connection. I don't think you can do that when you have no OS on the phone, right? Can I do this while in the bootloader?
Should I take any additional precautions attempting the process from W8-x64?
EDIT: It seems I need another phone to put the microSD on so I can get the correct CID with RevSkills (apparently you need the device to be connected through the MobileDeviceCenter or it fails). Then I may be able to ask someone else to get me a goldcard for said CID.
Click to expand...
Click to collapse
I remember there being tutorials for making a goldcard, that need to have a microSD adapter only, no other device, and others that tell you how to get cid from an android phone.that doesn't require PSAS like in the tutorial you're following

gilbert32 said:
I remember there being tutorials for making a goldcard, that need to have a microSD adapter only, no other device, and others that tell you how to get cid from an android phone.that doesn't require PSAS like in the tutorial you're following
Click to expand...
Click to collapse
I got an adapter I can put in my old PDA and get the microSD CID. @Gilbert, can you prepare Goldcard images? In the tutorial there are some users mentioned that are supposed to do it, can you recommend any of them so I can ask them for it? Thanks in advance

leandrox said:
I got an adapter I can put in my old PDA and get the microSD CID. @Gilbert, can you prepare Goldcard images? In the tutorial there are some users mentioned that are supposed to do it, can you recommend any of them so I can ask them for it? Thanks in advance
Click to expand...
Click to collapse
making goldcard is easy...
i remember getting cid and writing it reversed to http://huygens.hoxnet.com/goldcard.html (choose reversed cid iirc), downloading goldcard.img, opening sd with some hex editor (hxd i recommend) and writing goldcard.img content to it
you should read the tutorials available online, as what i said could be a lot wrong

gilbert32 said:
making goldcard is easy...
i remember getting cid and writing it reversed to http://huygens.hoxnet.com/goldcard.html (choose reversed cid iirc), downloading goldcard.img, opening sd with some hex editor (hxd i recommend) and writing goldcard.img content to it
you should read the tutorials available online, as what i said could be a lot wrong
Click to expand...
Click to collapse
I have tried to flash the phone with the Goldcard through this method. I am wondering wether I should expect something different after the bootloader starts, because I just get to the same point as I did when trying to flash it without the Goldcard, and getting the same failed "update terminate / update fail" message. Maybe I did not prepare the Goldcard well. Or maybe the phone mainboard ROM/NAND is simply ruined :crying:

I have to assume that the radio must be bricked. From what I read, this is the only thing that can actually brick your device when you still can get to the tricolored bootloader. Everytime I try to flash a ROM, it fails while flashing the Radio, so there has to be a hardware problem that prevents it. I still wonder how that happened.
I was running JellyTime, and then all of the sudden the phone froze and then just didn't turn on again (blank white screen). Can overheating ruin the NAND or ROM? Should I consider this battle as lost? I am so disappointed...
I read about one user who concluded that all you can do is flash a ROM with no radio, and keep the phone only as an Android device (no phone use). He told me I should get a dev or cooker to cook a radio-less ROM so I can do that. Does anyone know if there's a ROM like this I could use?