Related
hi guys
my blackstone behaves strange from the last time a flashed a new ROM:
-my camera only works from time to time
-sometimes the screen(or the entire phone maybe) dosent boot up( I put in the charging clable and leave it, and when i come back the screen doesent light up, i try to reset and nothing, I pull out the battery and still nothing it only vibrates)
could this be a software problem or should I send it back for warranty?
Did you flash an upgrade of your official (stock) rom? What kind of rom did you install?
Anyway, backup everything, download the rom again, flash again, hard reset (you will lose every data on your device, hence the backup), boot, restore contacts, test your phone.
If everything works fine, the problem was caused by a bad flash or by some program you installed.
Good luck
it wasn't the official one, i flashed energyROM leo( the latest one)
i tried reflashing another one but not official
and I hard reseted it and the same, the camera doesent work
im gonna see later if i the flash official one fixes something
btw is there someplace i can get official vodafone ROM? because i coulden't find only orange...
2dy said:
it wasn't the official one, i flashed energyROM leo( the latest one)
i tried reflashing another one but not official
and I hard reseted it and the same, the camera doesent work
im gonna see later if i the flash official one fixes something
btw is there someplace i can get official vodafone ROM? because i coulden't find only orange...
Click to expand...
Click to collapse
Did you follow proper guide for flashing? i.e. did you use USPL or HSPL? Stock roms can be found here
2dy said:
hi guys
my blackstone behaves strange from the last time a flashed a new ROM:
-my camera only works from time to time
-sometimes the screen(or the entire phone maybe) dosent boot up( I put in the charging clable and leave it, and when i come back the screen doesent light up, i try to reset and nothing, I pull out the battery and still nothing it only vibrates)
could this be a software problem or should I send it back for warranty?
Click to expand...
Click to collapse
the same has happened to me using energyrom latest rom, my phone was working fine, now just keep cutting out and going blank charges fine and vibrates when u turn it on, but i just get a blank screen
danjohnson19855 said:
the same has happened to me using energyrom latest rom
Click to expand...
Click to collapse
Ahem... good to know...
u used USPL i flashed it a couple of times before this and it worked fine,
i dont know, im gonna flash it woth official one and see if it continues if not im gonna send it to warranty ( if i still have it ) thx
It has nothing to do with the ROM, maybe the download was corrupted, but with the way you flashed (USPL/HSPL, rom on storage card, etc) and if you did a hard reset (or two hard resets).
As the mighty though Fallen Spartan said, follow the guide: http://forum.xda-developers.com/showthread.php?t=505377
you could also revert back to a stock-rom and reflash
did u find out the problem, mine works for about 6 hours and then goes blank , i take the battery out for 20 mins and restart the device and it boots up ok, its proper wierd
If you're using the latest Energyrom with 6.5 23081 then the problem is a bug with this build from microsoft.
It is a known issue in the WM 6.5 thread that the latest WM6.5 23081, 23085, 23502, 23504 has a bug where the phone does not turn back on from suspend. i.e. when the screen is blank and you press the power button to turn it on, it does not turn on and you have to reset the device. That's why I have not upgraded yet.
crav4speed said:
If you're using the latest Energyrom with 6.5 23081 then the problem is a bug with this build from microsoft.
It is a known issue in the WM 6.5 thread that the latest WM6.5 23081, 23085, 23502, 23504 has a bug where the phone does not turn back on from suspend. i.e. when the screen is blank and you press the power button to turn it on, it does not turn on and you have to reset the device. That's why I have not upgraded yet.
Click to expand...
Click to collapse
i started using that rom then changed but i still get the same problem is there a way of fixing it?
2dy said:
hi guys
my blackstone behaves strange from the last time a flashed a new ROM:
-my camera only works from time to time
-sometimes the screen(or the entire phone maybe) dosent boot up( I put in the charging clable and leave it, and when i come back the screen doesent light up, i try to reset and nothing, I pull out the battery and still nothing it only vibrates)
could this be a software problem or should I send it back for warranty?
Click to expand...
Click to collapse
if ur havning problems with a rom u downloaded please go back to the post of that rom and ask ur question there,
Not rom problem ...
wingtytn said:
if ur havning problems with a rom u downloaded please go back to the post of that rom and ask ur question there,
Click to expand...
Click to collapse
AFTER 4 months of use my tohc hd start this behavior of not turning back from suspend mode and what I learned is that is some kind of hardware problem not rom related ... some believe it starts after some drop to the floor... but no one is sure the real cause .... I will by another ... maybe touh hd 2 ....
I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.
Ultimaex said:
I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.
Click to expand...
Click to collapse
to specify that rom you used in this moment and to specify that RADIo is used
I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.
Ultimaex said:
I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.
Click to expand...
Click to collapse
to assess that rom V.0.8 it has rom 2.0x base
radio 2,08 to enable 576 MB
the rom that it uses, it could not be compatible with the version radius
try to chnge a version radio or try to change version rom
if you use radio 2.08 from rom 2.07,try to flash rom cooked with 576 Mb enable
sorry for my poor english,i'm Italian
Sorry mate
the problem is other
I have since the rom of bob qualified V.08 is for 576 mb
You tried booting up with the SD card taken out of the device?
WB
You need to have a radio that supports the 576 mb. But I don't think this is your problem. It sound like to me your storage card is the problem. If you have another storage card format it to FAT 32 and try again. I bet your problem is solved. Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.
I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.
Ultimaex said:
I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.
Click to expand...
Click to collapse
have you try flash rom with activeSync???
Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?
bobsbbq said:
Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?
Click to expand...
Click to collapse
Everything flashes as usual. HSPL, Radio and ROMs. The software just isnt running stable after flash.
If it would be a Radio/SPL/ROM problem the stock rom should fix it.
Not wanting to be the one to say it but maybe your device is defective or damaged. Or maybe the problem was caused ny the failure going to sleep, but I don't think so. I have accidentally unplugged mine before during flash and still got it back. If you reflash the ROM it should work again. If you don't have any luck I would flash back to the Stock ROM and take it in for repair.
To bad noone can help. I will do some research and if i have no success i will send it back.
Some weeks of waiting
bobsbbq said:
Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.
Click to expand...
Click to collapse
Any sources for that?
I never read anything backing this up.
pathologo said:
Any sources for that?
I never read anything backing this up.
Click to expand...
Click to collapse
Yes there have been many. There have been some in my threads. There is also a thread posted here with lots of discussions and it was determined the the lock ups and freezes with Manila 19222911 was the 16gb cards. It seems there was only one ROM that did not have the problem and unfortunately this cook doesn't share with others.
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
So the stock ROM is working then.
Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
try using the energy Rom...it works for me...all i can say, it's more stable than any other roms that i use before....
bobsbbq said:
So the stock ROM is working then.
Click to expand...
Click to collapse
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.
Ultimaex said:
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.
Click to expand...
Click to collapse
I guess I don't understand. You have to have a working ROM to install a program? For a stock ROM you should not have to install anything. It either works or it doesn't.
I have my Leo for 1 month. I flashed it (HSPL), installed cooked ROM and everything was fine. Than few days ago I installed new version of ROM and then the problems started...after every soft reset, ROM "restarted" (every tweak or installed program disappeared nad the phone looks like after installing new ROM) and after few resets it is stucked on the first screen (with numbers of radio etc.) and wont move further.
Can anyone help?
Dokturek said:
I have my Leo for 1 month. I flashed it (HSPL), installed cooked ROM and everything was fine. Than few days ago I installed new version of ROM and then the problems started...after every soft reset, ROM "restarted" (every tweak or installed program disappeared nad the phone looks like after installing new ROM) and after few resets it is stucked on the first screen (with numbers of radio etc.) and wont move further.
Can anyone help?
Click to expand...
Click to collapse
I know it's a pain, but have you tried a hard reset since this started? If not, give that a go. If you're still having problems then I'd recommend not using the ROM that you currently have.
have try flashing stock ROM from memory card? I guess it might work
johncmolyneux said:
I know it's a pain, but have you tried a hard reset since this started? If not, give that a go. If you're still having problems then I'd recommend not using the ROM that you currently have.
Click to expand...
Click to collapse
Yes, I did hard reset and it didnt help. Ofc I will use another ROM, but problem is that I cant do anything atm...the phone is simply stucked on the first screen and I cant even sync it to install another ROM :-/
baoma87 said:
have try flashing stock ROM from memory card? I guess it might work
Click to expand...
Click to collapse
Dokturek said:
Yes, I did hard reset and it didnt help. Ofc I will use another ROM, but problem is that I cant do anything atm...the phone is simply stucked on the first screen and I cant even sync it to install another ROM :-/
Click to expand...
Click to collapse
As above - that's probably your only way to resolve then.
baoma87 said:
have try flashing stock ROM from memory card? I guess it might work
Click to expand...
Click to collapse
Wish I could, but all I can see is only white logging screen...phone doesnt react at all.
You can flash from the memory card without the need to start the device up and connect to a PC. That's what he's suggesting. I don't know how to do this myself, having only done it via ActiveSync, so I can't tell you how to do it. I do know that you put a ROM image in the root of your storage card and reboot the device, but there's more to it than that. Have a look in the ROM forum for more advice (unless someone can help you here, of course).
johncmolyneux said:
As above - that's probably your only way to resolve then.
Click to expand...
Click to collapse
Will try it...as soon as I find the instruction
can you still get in to the bootloader, turn the phone on while holding volume down, get the 3 coloured screen, you can do the ROM and Radio from there
Dokturek said:
...the phone is simply stucked on the first screen and I cant even sync it to install another ROM :-/
Click to expand...
Click to collapse
you dont have to have a booted phone to flash roms over usb. Just boot to bootloader and wait for the 'serial' to change to 'usb' then run your flash.
Demon_man said:
can you still get in to the bootloader, turn the phone on while holding volume down, get the 3 coloured screen, you can do the ROM and Radio from there
Click to expand...
Click to collapse
samsamuel said:
you dont have to have a booted phone to flash roms over usb. Just boot to bootloader and wait for the 'serial' to change to 'usb' then run your flash.
Click to expand...
Click to collapse
Well you learn something new every day. I never knew that!
Great job! My Leo is alive again
Thx guys for helping me out.
johncmolyneux said:
Well you learn something new every day. I never knew that!
Click to expand...
Click to collapse
heh, every days a school day. It also has the added benefit (danger?) of bypassing the low battery warning, so if you REALLY can't wait for it to charge......
johncmolyneux said:
Well you learn something new every day. I never knew that!
Click to expand...
Click to collapse
I only learnt because changed ROM without Radio first haha, im always learning on here its great
Hey guys,
I accidently deleted a file called services.exe from device/windows/autostart.
Since then the device gets stuck at windows "the orange screen" when i do a soft reset. However I can still get in, the device starts, after doing a soft reset (maybe twice or thre times!) by presing the tiny red button behind the battery cover. When the device starts i notice no difference in performence.
I've no idea, but can someone please uppload "services.exe" from autostart or whatever files there's necessary to start the device properly. I'm running Swedish stock 1.66 ROM.
Thanks a lot
/Vibes
i'll see if I can get it off my phone, but doubt it mate, will itwork ?? and you could just Hard Reset
TC says file cannot be coppied hang on lol
Demon_man said:
i'll see if I can get it off my phone, but doubt it mate, will it work?? and you could just Hard Reset
Click to expand...
Click to collapse
Yea i was wondering that too, maybe I need it from a Swedish stock ROM? Well yea, a hard reset will do the work but that's just too much pain in the ass for the cake
There got to be another way..
Good_vibes said:
Yea i was wondering that too, maybe I need it from a Swedish stock ROM? Well yea, a hard reset will do the work but that's just too much pain in the ass for the cake
There got to be another way..
Click to expand...
Click to collapse
Might post your exact winmo version , make sure you get the right file ...
Alright, it says.
OS 5.2.21869 (21869.5.0.82)
Manila 2.5.19211619.0
ROM 1.66.413.2 (76641) SVE
Radio 2.06.51.07
Someone with this verson upload the startup files please. Device/windows/autostart
That should work right?
Hi all, i need to send my lovely hd2 for a SAV...but as many, i changed lot of things on it!
I searched every where but couldn't managed to find a stock splash image.the second one that comes up with all the writtings at the bottom.Who can help me?
thanks a lot
the stock roms generally don't have a second splash, they just show the first for twice as long and the writing appears half way through.
if you (like i did) flashed a second boot screen, or you used a cooked rom that includes a second splash, you now no doubt have found that flashing a stock rom hasn't removed it. you will need to make a duplicate of the stock first splash and flash it as a second. i had to do this with my o2 hd2.
some info on how in my sig (the watermarking link)
Okayyyy, thanks a lot! i was starting to feel lost as i reflashed so many time without making it!lol!
Now my prescious will be able to get it sensivity back....
By the way, maybe you know about this:
I used a froyo desire hd android rom and since then i'm unable to use the touch screen. Thehardware buttons works awsomly(even better than they ever did) but the ttouch screen just keep taunting me like: no no no,i won't anwser!it's kind of frustrating!
Do you know about this?
Thanks again guy, you're just incredible
sorry, i know nothing about android.
ok no prob...I'll just send it back and see how it goes.
but first, i don't understand how watermarking can help me duplacating the first splash book?can you explain please?the thing is that i don't know how to duplicate the first splash...
you need to find the splashscreen as a bitmap .bmp file (there are several threads with various stock images, or you can probably make one, i did for my o2 return) and use the method in my watermarking thread to flash that image to both the first and second splash locations. this will then look like one splash when you send it for repair, so they wont notice anything. (Theyre really only interested in the spl anyway, you can probably get away with just using a standard htc splash even on a branded phone)
blpowder said:
ok no prob...I'll just send it back and see how it goes.
but first, i don't understand how watermarking can help me duplacating the first splash book?can you explain please?the thing is that i don't know how to duplicate the first splash...
Click to expand...
Click to collapse
Depending on what boot screen you need, I might be able to help you out. If you need the plain white HTC splash (found on WWE devices) you can download the second-level splash from my sig.
sumflipnol said:
Depending on what boot screen you need, I might be able to help you out. If you need the plain white HTC splash (found on WWE devices) you can download the second-level splash from my sig.
Click to expand...
Click to collapse
Yes i'm looking for the stock splash screen...if i flash yours, will it revert the first splashscreen or the second one(the one i need)?. If it doesn't could you jus post the splash screen image?i 'll flash it by myself. Thanks a lot for all your help
By the way, do know about android on hd2?maybe you could help me with the issue i explained few posts earlier (with the unresponsive touchscreen after a using an android rom.I tried to hardreset,go back to stock rom but nothing changed....)thanks again
blpowder said:
Yes i'm looking for the stock splash screen...if i flash yours, will it revert the first splashscreen or the second one(the one i need)?. If it doesn't could you jus post the splash screen image?i 'll flash it by myself. Thanks a lot for all your help
By the way, do know about android on hd2?maybe you could help me with the issue i explained few posts earlier (with the unresponsive touchscreen after a using an android rom.I tried to hardreset,go back to stock rom but nothing changed....)thanks again
Click to expand...
Click to collapse
I have the stock white HTC splash screen (level 2) in my sig (just to clarify, it's just a white screen with a green "HTC" logo in the middle). It's the second attachment here.
What Android build do you have? List your Android build, your radio, and your ROM.
Yep, this is the one i was looking for. thanks
As i said i return to a stock rom(sd card flashing), so i don't have any android rom anymore.nor coustom windows phone.
i used
hc desire hd rom from meedjay 3.3a
windows rom: ozdroid 1.11
radio: 2.12.50.02.2(not quite sure)
it functionned flawlessly 'till i rebooted.Then the touchscreen became totally unresponsive.Now i can only use the hardware buttons...(sounds really bad.doesn't it?) i have to mentionned that i already changed the screen for aproximately the same issue(the screen used to become partly unresponsive for a while...)
blpowder said:
Yep, this is the one i was looking for. thanks
As i said i return to a stock rom(sd card flashing), so i don't have any android rom anymore.nor coustom windows phone.
i used
hc desire hd rom from meedjay 3.3a
windows rom: ozdroid 1.11
radio: 2.12.50.02.2(not quite sure)
it functionned flawlessly 'till i rebooted.Then the touchscreen became totally unresponsive.Now i can only use the hardware buttons...(sounds really bad.doesn't it?) i have to mentionned that i already changed the screen for aproximately the same issue(the screen used to become partly unresponsive for a while...)
Click to expand...
Click to collapse
No problem.
I'm a little confused. Does your screen respond only in WM? Or does your screen not respond in both WM and Android?
If your screen only responds in WM (but does not respond in Android), then it can't be a hardware problem -- it's something wrong with your Android build. If this is the case, try a different Android build; try one that is not from the Desire HD port because that port still has a lot of bugs. If you want, you can try the phireMOD ROM (based on the Sprint HTC EVO4G) that is working for me.
Nope,
unfrotunately the screen is totaly unresponsive in both roms....the only things i can use are the hardware buttons....So i guess it's an hardware issue,but i wanted an experienced opinion before sending it....
What confused me is the fact that the phone didn't fell.i only changed the android rom( i'm kind of flashaholic!lol) then i rebooted and since the screen became unresponsive, even after many hardreset.I can't enter my pin code anymore,neither can i enter windows mobile, or android.
Now i'll just have to reflash the stock spashscreen and send my prescious for a little lifting,right?lol
blpowder said:
Nope,
unfrotunately the screen is totaly unresponsive in both roms....the only things i can use are the hardware buttons....So i guess it's an hardware issue,but i wanted an experienced opinion before sending it....
What confused me is the fact that the phone didn't fell.i only changed the android rom( i'm kind of flashaholic!lol) then i rebooted and since the screen became unresponsive, even after many hardreset.I can't enter my pin code anymore,neither can i enter windows mobile, or android.
Now i'll just have to reflash the stock spashscreen and send my prescious for a little lifting,right?lol
Click to expand...
Click to collapse
Maybe your phone just wanted to fail when you did a hard reset.
Yeah, you'll have to send it back. Just flash the stock splash screen (level 2), make sure everything (splash screen, radio, etc.) is back to stock(!!!), then flash the stock SPL.
sumflipnol said:
Maybe your phone just wanted to fail when you did a hard reset.
Click to expand...
Click to collapse
LOL!
Yeah, he wanted a brake,as i tortured him so much during the past 6 months!
Thanks a lot man, it's good to know i can count on all of you experienced guys!
I'll do as u said then wait and see!lol
Last question: can i flash the latest official rom?or will it stop me if i want to reinstall HSPL when i get the phone back?
blpowder said:
LOL!
Yeah, he wanted a brake,as i tortured him so much during the past 6 months!
Thanks a lot man, it's good to know i can count on all of you experienced guys!
I'll do as u said then wait and see!lol
Last question: can i flash the latest official rom?or will it stop me if i want to reinstall HSPL when i get the phone back?
Click to expand...
Click to collapse
No, I'm not an expert. I just learned a little bit of this stuff over time after reading on XDA.
You can probably flash official ROMs because they don't need HSPL. Get it from HTC's website so in the event your phone gets bricked, you could say you got the ROM from HTC, not XDA.