Database Users

X1i when using 3G on AT&T I cant make or receive calls???

So when I leave all the band settings to auto on the phone, it immediately connects to AT&T's 3G network and shows the "H" in the title bar it worked for a little while then calls stopped coming through, after a hard reset it works again with calls for a few hours, then it begins to fail.
If I switch the bands to GSM and manually select the frequencies (850 + 1900, according to wm) then it connects to the EDGE network, and I can make and receive calls as I please, no problems, except for the crappy network speed.
So someone help me out here please, is the phone defective, or is it not working as it should because of the lack of the 850 band? I know that AT&T works on either or but this problem has me stumped.
Other than this rather huge problem (phone that cant make calls), I absolutely love the Xperia and would hate to return and wait for another.

did you try to use the connection wizard to let the phone config itself?
after I put my iphone sim in it shows the H/3G icon on anf off all the time, while I can receive call I was unable to go online.... after someone suggested me to call att to update the imei on my account to the x1, I found that I still have to go to connection and change the setting myself b4 it can go online. you will have to remove the user name and pw in media net setting and uncheck the proxy server.
I guess my case is a little different than yours but I guess you can give it a try... good luck =)

Thanks, I actually haven't tried that since i figured it would be the same as what happens when you turn the phone on for the first time, when it autoconfigs.

if it say it detect a new sim and ask if you want to do the auto config then I guess its the same... but again I did need to change some settings inside the network config to make it work too... so I am guessing the "auto config" has some flaw in it

No problem with my X1i when I venture in a1900mhz area close to my home. I live in a small town in Ca. only 850mhz here. But in the larger Metro area around me... No Problems with calls or hspeed data access...
Stuart

Thanks for the replies, It looks like the Configuration wizard in the settings menu did the trick. It do something else that the autoconfig doesnt. The phone seems to work now just fine, although it doesnt hang on to the signal as well as my old k790a. The office I work in is an ATT dead zone and I could make calls using the K790a with only one bar, with the Xperia it either doesnt go through or drops the call.
Again this is better as it works now, just not as well as my old phone.
Also, scl_electronics, so you are saying the X1i has both 850 and 1900mhz bands? I had a feeling mine did too, but I thought it was put to rest that that wasnt the case with the X1i....

Sorry Aaron J,
i should have been more specific!! Where I live, 3G is only on 850mhz band so I don't get access..Just The edge network. When I venture about 10 mile away toward the major Metro areas..The 1900mhz band are used. So the H is displayed, but I don't have those access problems for calls or data!!
But i am waiting to see if they can crack the rom for 850mhz-3G access!!
Stuart

scl_electronics said:
Sorry Aaron J,
i should have been more specific!! Where I live, 3G is only on 850mhz band so I don't get access..Just The edge network. When I venture about 10 mile away toward the major Metro areas..The 1900mhz band are used. So the H is displayed, but I don't have those access problems for calls or data!!
But i am waiting to see if they can crack the rom for 850mhz-3G access!!
Stuart
Click to expand...
Click to collapse
Oh ok thats kind of makes, sense although I thought the X1i didnt have an 850 band at all, so what frequency does it work off then?
Anyways, back to my problem....I spoke too soon, it dont work on 3G switched to EDGE. I might just try getting a new sim card, mine is a Cingular one from 2005, that has been in at least 4 different phones now including the X1i.

Aaron J said:
Oh ok thats kind of makes, sense although I thought the X1i didnt have an 850 band at all, so what frequency does it work off then?
Anyways, back to my problem....I spoke too soon, it dont work on 3G switched to EDGE. I might just try getting a new sim card, mine is a Cingular one from 2005, that has been in at least 4 different phones now including the X1i.
Click to expand...
Click to collapse
Well out here in Ca... 850mhz gsm/edge is used ..So I quad band gsm phone is handy!!!
Stuart

Yes it is! My little problem is a little confusing though as one thing I just realized that I didnt say before is that the phone has no problem connecting to the 3G network using HSDPA. I get full bars with the H icon pretty much everywhere in my area and my data speeds are very good. So I can surf the net, download programs, watch high quality youtube videos using the app in touchflo and even send and receive texts just fine.....just no calls when on 3G. I'm hoping its just setting somewhere and not a faulty device.
I live in Raleigh NC by the way so maybe it could be a faulty tower?

Well when venture into Stockton Ca. my phone switches to 3G-HSDPA:1900MHZ Without a connection hitch....
Have you tried a soft reset......
But when all else fails Hard Reset to the Rescue!!!
Btw... in several of my ppc-wm units when restoring to OEM setting(hard reset) there has been many time the process had a problem. So something would be screwed up!! So when You don't succeed, try another hard reset!!
Good luck,
Stuart

hey i was wonder if your problem is HSDPA/HSUPA being on, i have at&t also and it worked for the first few weeks fine with it being on then all of a sudden it stopped and couldn't connect to the internet, before i had the H/Edge showing up and also my email never updated when it was set to do it every 15minutes. Now that i disable the HSDPA/HSUPA i see 3G/Edge and email update all the time on the X1i. Just wonder if that might fix it, I'm all kinda still new to all this but i had my X1i for 2 1/2 weeks now.

Hello thanks for all the suggestions, Experiaenjoy, no I haven't tried mainly because I can connect to the data network just fine and get awesome speeds with full bars pretty much everywhere, all of my data related activities and programs work just fine (aka murder my battery life ). I just cant make calls while on 3G.
I talked to a coworker today who used to be a regional manager at AT&T hee said that he saw many cases of people who were having problems where it was due to the SIM card. He said they all had the older orange Cingular card and that an update to the new blue AT&T card solved all problems. So right now I'm trying to see if I can get mine updated (I do have an older Cingular SIM). Once I get that, I will do a hard reset (3rd one also done about 20 soft resets since I 've had it-I've installed a bunch of programs and tweaks) and skip the auto config and go straight to the connection wizard.

Signal Strength with AT&T and Omnia 2

Does anyone know why my Omnia 2 gets weak signal strength on At&t. I rarely get the 3g network and, at most, get 1 bar. However, the internet works fine and I love the phone but don't know if I need to go to Verizon to get better reception.
Tried At&t support but, other than upgrading the sim card, they won"t do anything with a non-at&t device. And since it was bought before the phone was launched in the U.S. I can't get support from Samsung. Are there some settings on the phone that can be changed to improve reception? Any ideas would be greatly appreciated - thanks.
Here's the network specs for the phone: GSM/GPRS/EDGE 850/900/1800/1900 MHz, UMTS 850/1900 MHz, HSDPA 7.2Mbps, HSUPA5.76 Mbps

JohnHere999 said:
Does anyone know why my Omnia 2 gets weak signal strength on At&t. I rarely get the 3g network and, at most, get 1 bar. However, the internet works fine and I love the phone but don't know if I need to go to Verizon to get better reception.
Tried At&t support but, other than upgrading the sim card, they won"t do anything with a non-at&t device. And since it was bought before the phone was launched in the U.S. I can't get support from Samsung. Are there some settings on the phone that can be changed to improve reception? Any ideas would be greatly appreciated - thanks.
Here's the network specs for the phone: GSM/GPRS/EDGE 850/900/1800/1900 MHz, UMTS 850/1900 MHz, HSDPA 7.2Mbps, HSUPA5.76 Mbps
Click to expand...
Click to collapse
Try changing your band settings to WCDMA then 850+1900. Works great for my Touch HD T8285.

almost there - thanks
Thanks for your reply. But, after surfing the net I still can't figure out how to change these settings on the Omnia 2, ok I don't know how to do it on any phone. Is this something easily done, and if so, how?

JohnHere999 said:
Thanks for your reply. But, after surfing the net I still can't figure out how to change these settings on the Omnia 2, ok I don't know how to do it on any phone. Is this something easily done, and if so, how?
Click to expand...
Click to collapse
Not sure on your phone but on mine go to settings, then phone, then band settings.

no band settings there either
Not that easy. I get phone, then settings, then the options are general, voice call, video call and message.
General sub folders are: call cost; caller id; own number; fixed dialing; auto answer; closed user group
Voice Call sub folders are: call barring, call forwarding, call waiting
Video Call - n/a
Message sub folders are call broadcast message, wap push message, voice mail, send text message options
I tried looking at the connections menu which yields:
My Internet - add a new modem; edit my proxy server; manage existing connections.
Manage existing allows you to change from media net or other connections and when you do that there are no options for changing band. Also if you try to create a new connection there is still no mention of band.
http://forum.xda-developers.com/images/smilies/frown.gif

I am not sure if your phone has 850mhz, as far as I Know the omnia 2 i8000 has 900/1900/2100 compatibility and maybe that is why you are getting so weak signal,

Only the Bell Canada Omnia2 has 850mhz + 1900mhz so unless you have this one it won't work well with at&t 3G.

rob3rtx said:
Only the Bell Canada Omnia2 has 850mhz + 1900mhz so unless you have this one it won't work well with at&t 3G.
Click to expand...
Click to collapse
This is true, I have the GT I8000l version and the band settings are in the Omnia Settings/Network Settings/Band settings menu -- Mine is set to Automatic, though there are other choices including the WCDMA, GSM 900/1800 and GSM 850/1900. You must also enable HSPDA setting as well (same Network menu) and then reset your phone.
I get Great 3G+ / HSPDA speeds almost everywhere around Harrisburg, PA "EXCEPT" in my own HOME location (only Edge ) Just that I am behind a mountain so.....
Anyway, this lack of Home location 3G+ is causing me to place my Omnia 2 (Bell Canada version) up for sale as I was expecting 3G in my own home !!!! (probably going to Ebay this weekend. The phone is great though and the screen (OLED) is INCREDIBLE !!! I am running SPB mobile shell 3.0 (Lite rom installed) so phone is quite zippy without the widget mess though the original Bell rom can be reinstalled. ( I have on DVD ) Really ticked though about the lack of 3G* at home so I may be looking for HD2 or such --and settle for EDGE speed.
Thanks to XDA developers for considering and supporting some Non HTC phones such as OMNIA 2

Not true AT ALL!
rob3rtx said:
Only the Bell Canada Omnia2 has 850mhz + 1900mhz so unless you have this one it won't work well with at&t 3G.
Click to expand...
Click to collapse
I have the original Omnia II with the 1900mhz band and have not had a single problem with excellent 3G speeds in Chicago and surrounding suburbs.
I'm getting the exact same signal strengths I was getting when I had the ATT Fuze - which does have BOTH the 850 and the 1900 mhz bands.

technillion said:
I have the original Omnia II with the 1900mhz band and have not had a single problem with excellent 3G speeds in Chicago and surrounding suburbs.
I'm getting the exact same signal strengths I was getting when I had the ATT Fuze - which does have BOTH the 850 and the 1900 mhz bands.
Click to expand...
Click to collapse
Chicago might primarily be 1900mhz but Dallas (my home) and probably where the original poster is located is 850mhz so the i8000L from Bell would be a better choice and probably for everyone else so you could never be limited to 1900mhz.

CAL0613 said:
This is true, I have the GT I8000l version and the band settings are in the Omnia Settings/Network Settings/Band settings menu -- Mine is set to Automatic, though there are other choices including the WCDMA, GSM 900/1800 and GSM 850/1900. You must also enable HSPDA setting as well (same Network menu) and then reset your phone.
I get Great 3G+ / HSPDA speeds almost everywhere around Harrisburg, PA "EXCEPT" in my own HOME location (only Edge ) Just that I am behind a mountain so.....
Anyway, this lack of Home location 3G+ is causing me to place my Omnia 2 (Bell Canada version) up for sale as I was expecting 3G in my own home !!!! (probably going to Ebay this weekend. The phone is great though and the screen (OLED) is INCREDIBLE !!! I am running SPB mobile shell 3.0 (Lite rom installed) so phone is quite zippy without the widget mess though the original Bell rom can be reinstalled. ( I have on DVD ) Really ticked though about the lack of 3G* at home so I may be looking for HD2 or such --and settle for EDGE speed.
Thanks to XDA developers for considering and supporting some Non HTC phones such as OMNIA 2
Click to expand...
Click to collapse
I loved the Omnia 2 but the lack of Roms and not having xda support (not such much anymore now i guess) made me sell it and go back to my Rogers Magic. I'll probably wait for the HTC Obsession or maybe the HTC Bravo as my next phone i definitely wanna check out Windows 7 when it comes out.

technillion said:
I have the original Omnia II with the 1900mhz band and have not had a single problem with excellent 3G speeds in Chicago and surrounding suburbs.
I'm getting the exact same signal strengths I was getting when I had the ATT Fuze - which does have BOTH the 850 and the 1900 mhz bands.
Click to expand...
Click to collapse
can you post your network settings?

I've had pretty good reception in the NYC area on 3G for the past 6 months... until today. Now my phone can get 3G and 3g+ reception but I can't get any data over 3G anymore. When I step down to EDGE, I can get data again. iPhone users seem to be fine. Anyone else having these problems in the NYC area?

[Q] Italian Sim on a T-Mobile Tab No 3G

I have flashed my T-Mobile tab and asked T-Mobile for a Sim unlock code and now it works fine with any Sim. I can place calls with the dialer.
My problem is that in Italy, the tab connects to the internet only in Edge, it does not use the UMTS network.
By going to the mobile settings I do not have the "use only 2G" option.
I have GSM/WCDMA automatic on the settings. By typing the 4636 code on the dialer, it seems already well configured.
any solution?
thx

What is your provider? Because if it does not use the 2100mhz frequency for 3g (t-mobile) you will just not be able to ever connect on 3g, it's not a problem of configuration but a radio incompatibility.

In italy 3g is on 2100 and 900mhz. If i read it right T-Mobile uses 1700 and 2100mhz so it shouldn't be a big issue.
However unless you are using a TIM sim, forget about EDGE: GPRS only for all the other mobile operators!
Maybe there is poor 3g cover where you are at the moment? Wind is particularly low on the cover side.

My italian operator is wind.
the sim I am trying to use is wind.
I am located in Milan.
I also have an N1 bought in the US, when google released the TMobile version (with the 900/2100 band) and in Milan gets the 3G signal pretty well. As soon as I put the Sim in the Galaxy tab, the data connection goes in Edge even when I have full signal.
thank you

What is your apn setting -"profili" from your screen shot? You might have to write down the values when your sim card is in your other phone, then manually add them to your tab.

That is the setting access point names.
There is where I have set up the Apn for my Italian operator. Since I have my nexus one with the 3G connection working fine, I am using the very same settings. The Firmware version I am using is XXJK1.

rangercaptain said:
What is your apn setting -"profili" from your screen shot? You might have to write down the values when your sim card is in your other phone, then manually add them to your tab.
Click to expand...
Click to collapse
I already tried this. By checking the dialer code 4636 i have a pretty similar setting as the nexus but still it does not connect using 3G. I am not very techie but I wonder if it could be something related with the modem file I used during the flashing procedure. The calls work fine though.

nonuya said:
I already tried this. By checking the dialer code 4636 i have a pretty similar setting as the nexus but still it does not connect using 3G. I am not very techie but I wonder if it could be something related with the modem file I used during the flashing procedure. The calls work fine though.
Click to expand...
Click to collapse
Try the Roto 3g modem.bin file. Flash in Odin in the Phone spot, leave all other settings alone.

Was this solved? I'm in the U.S. thinking about buying a tab, in Sweden we use 2100Mhz for 3G. Will it work and which one should I get, T-mobile or AT&T?

rangercaptain said:
Try the Roto 3g modem.bin file. Flash in Odin in the Phone spot, leave all other settings alone.
Click to expand...
Click to collapse
sorry for not replying before. in the various posts I found two files, i wonder which one is the correct one to use with the firmware I have on my tab (XXJK1).
I would like to be able to make calls and connect in 3g with my italian sim
Which file I use?:
PDA_JL5modem.tar (modem.bin)
or the :
JMA_ROTO-2G_modem.bin
thank you

Actually, I would use the bell i9000 modem from the Roto JME post when using a network compatible to at&t. That gets voice and 3g. I would use the Roto 3g modem for a network compatible to t-mobile to get 3g, but not voice.

rangercaptain said:
Actually, I would use the bell i9000 modem from the Roto JME post when using a network compatible to at&t. That gets voice and 3g. I would use the Roto 3g modem for a network compatible to t-mobile to get 3g, but not voice.
Click to expand...
Click to collapse
I downloaded a modem.bin file from one of the posts after reading one of the Roto posts but unfortunately did not change anything at all.
Would you please link me the post where I can download this specific bell i9000 modem, that is also compatible with a at&t? I want to use the tab for phone calls and 3G, as in Italy we have no voice restrictions as in the US.
Thanks

How to enbale 3g on t-mobile tab using att sim

TRY the secret code of *#*#2263#*#* ? This will work on tmobile’s samsung vibrant. This will allow you to check mark the 850mhz and 1900 mhz frequency for att 3g network. If you are on tmobile it will need 1700 AWS and 2100 MHZ for tmobile 3g. I would check all the frequencies so you won’t have to worry about this anymore. Let me know if that works for you. Thanks

this is questionable...seeing that you spelled enable wrong..

Instead of being sarcastic , why don't you just try it. I was trying to be helpful to the forum since i have received so much useful knowledge from all of you collectively . I stumbled on this by accident so i thought i would share it

Sorry, even though the menu choices are there, the hardware isn't. The vibrant does have the ability to use all the frequencies, but not the tab. I think samsung used one menu for every tab model.
Anyway the code is *#2263#. Keep trying -- we need a solution!

How one can dial *#2263# on T-Mobile tab, which doesn't have the dialer?

joedoe said:
How one can dial *#2263# on T-Mobile tab, which doesn't have the dialer?
Click to expand...
Click to collapse
or does it?
Seriously, this is the Dev section. Of course it does, With the right ROM.

joedoe said:
How one can dial *#2263# on T-Mobile tab, which doesn't have the dialer?
Click to expand...
Click to collapse
Flash any rom besides a stock rom and you will have the phone dialer.

Heres what I don't get.. Why can't I select the 1700mhz band. When I do it selects the 900mhz band.
I am using Simple Mobile, so theres no way for Tmobile to block the IMEI number....
If I use a stock rom, it works 3g no problems.

The radio band is a limitation of the firmware on the device - the TMO devices are configured to only use the 1700/2100 AWS combination, while the AT&T variant is configured to use 850 or 1900. (Both also appear to work on the 2100 Euro frequency).
To change the available radio bands it appears that not only must we change the Android firmware & modem, but also we need to change the firmware for the RF amplifier chip which is sold by Infineon as being universal.
So far, nobody has figured out how to do this.
Hence we have the 2G limitation on the TMO tabs, and no way of switching between AT&T and TMO frequencies on the same tab.
The IMEI issue is a red herring that is only relevant if you are trying to use a regular TMO phone SIM from a normal TMO phone account in a Tab. They will not let you use a SIM from a standard phone account in your TAB because they want you to pay twice for the data - once for your phone, and again for the Tab. You can't simply drop your phone SIM into your tab whenever you want 3G data on your Tab. This is what they block by checking the IMEI number against your account type.
Sent from my SGH-T849 using XDA App

themachfive said:
Heres what I don't get.. Why can't I select the 1700mhz band. When I do it selects the 900mhz band.
I am using Simple Mobile, so theres no way for Tmobile to block the IMEI number....
If I use a stock rom, it works 3g no problems.
Click to expand...
Click to collapse
Samsung uses the same service menu for all models of the tab, so all possible frequencies are on the menu. If there were no differences between carrier models we would ask have the same model number. Different models, carriers, hardware.

deleted...

rangercaptain said:
Samsung uses the same service menu for all models of the tab, so all possible frequencies are on the menu. If there were no differences between carrier models we would ask have the same model number. Different models, carriers, hardware.
Click to expand...
Click to collapse
I get that.. I come from the land of the HTC Leo. For a long time all we had was edge service, the RMNET 3g, then PPP 3g, then clockwork and finally true RMNET 3g. However, my thoughts are.. If the stock ROM comes with 3g service enabled, there has to be a way to suck out the guts that make it work. Also within our "phone" enabled roms there also has to be a way to split the data within the rom. Sorry if it makes sense to me but look at it like this.. Roto has a modem switcher, why couldn't we just code the rom while cooking to use one modem for data and the other for calls?
Just remember that no matter what device you are using, when on a phone call - Data does not work.
Please shed some light on the details I am missing..

themachfive said:
Heres what I don't get.. Why can't I select the 1700mhz band. When I do it selects the 900mhz band.
I am using Simple Mobile, so theres no way for Tmobile to block the IMEI number....
If I use a stock rom, it works 3g no problems.
Click to expand...
Click to collapse
Wait a minute... Did you flash a Euro ROM over a US TMO Tab?
if so, you should be able to use the Roto Modem switcher that will allow you to use the TMO U S modem if you need 3G, or switch to the Euro modem to do calls and EDGE...
otherwise, something here does not ad up...

themachfive said:
... If the stock ROM comes with 3g service enabled, there has to be a way to suck out the guts that make it work. Also ... Roto has a modem switcher, why couldn't we just code the rom while cooking to use one modem for data and the other for calls?
Please shed some light on the details I am missing..
Click to expand...
Click to collapse
Roto actually tried to hack together the data code from the stock TMO 3G modem with the voice bits from the Euro one, but was not able to get it to work. Others have tried to flash modems from the Samsung Vibrant (which is in theory the same device in phone clothes), but the Vibrant modems will not play nice with the Tab and will not support 3G even with the US firmware...
There is something under the hood that we are not able to access that is blocking full phone capability on the TMO tab.

rushstatus1 said:
TRY the secret code of *#*#2263#*#* ? This will work on tmobile’s samsung vibrant. This will allow you to check mark the 850mhz and 1900 mhz frequency for att 3g network. If you are on tmobile it will need 1700 AWS and 2100 MHZ for tmobile 3g. I would check all the frequencies so you won’t have to worry about this anymore. Let me know if that works for you. Thanks
Click to expand...
Click to collapse
is it possible to use att tab with tmobile sim and get 3g+phone

themachfive said:
Roto has a modem switcher, why couldn't we just code the rom while cooking to use one modem for data and the other for calls?
Please shed some light on the details I am missing..
Click to expand...
Click to collapse
I agree with your approach. The modem.bin files we use with the modem switch both do what we want, but are excluding some hardware options.
My idea would be for someone to open the two binary files side-by-side to compare and find the line that turns on/off the voice in the 2g and 3g modems.
To that end we have a bounty thread in the general section, to attract the talent and skill we need. Why not go make a pledge? The higher the sooner!

maxtcee said:
is it possible to use att tab with tmobile sim and get 3g+phone
Click to expand...
Click to collapse
I will try that in a few and report back. Good idea.

---ATTENTION ALL--- hey guys the only dialer pads are from the euro roms which uses a diff freq then north america we would need to make an american rom with tmobile or att united states 3g freq's this is why u can either hav 3g data or cellular serves also for u guys that hav cellular in order to hav 3g data you would hav to trash ur imei and make a new one tmous has all galaxy tab imei's locked for data only.... hoped this helped u all and we are out here lookin and waitin... GoodDay

themachfive said:
Heres what I don't get.. Why can't I select the 1700mhz band. When I do it selects the 900mhz band.
I am using Simple Mobile, so theres no way for Tmobile to block the IMEI number....
If I use a stock rom, it works 3g no problems.
Click to expand...
Click to collapse
according to roto, simple mobile uses tmobile infrastructure, so the speculation is that tmobile is still effectively blocking the imei.

Did I buy a bad phone / wrong phone?

Just bought a galaxy note n7000.. when I poped in my sim card it does now work..
I am with mobilicity they use AWS, with bands 1700/2100
http://mobilicity.ca/
Is there anything I can do? Other than beat the hell out of my brother who told me it will work?

Preaak said:
Just bought a galaxy note n7000.. when I poped in my sim card it does now work..
I am with mobilicity they use AWS, with bands 1700/2100
http://mobilicity.ca/
Is there anything I can do? Other than beat the hell out of my brother who told me it will work?
Click to expand...
Click to collapse
beat away... now it will work but on edge... there is a thread on trying to create a radio to work for tmobile which is the same as yours... now they have got the i717 version(usa att) to work but not the 7000... give these guys time they always come through... but until then its edge only....
ps you may find someone with a i717 wanting a 7000 and might trade....

Frequency used by Galaxy note :
Also known as Samsung GT-N7000, Samsung I9220
General 2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 900 / 1900 / 2100
4G Network LTE 700 (region specific)
Since your service provider uses 1700 and 2100, then it should work.. just activate your 3G network in your wireless settings.
Good luck

kawgirlval69 said:
beat away... now it will work but on edge... there is a thread on trying to create a radio to work for tmobile which is the same as yours... now they have got the i717 version(usa att) to work but not the 7000... give these guys time they always come through... but until then its edge only....
ps you may find someone with a i717 wanting a 7000 and might trade....
Click to expand...
Click to collapse
I am gonna beat that kid... dam it!!
can you link me to this thread... are they close or this a dream?
Sorry for my ignorance but by radio you mean making and receiving calls?

sagaff said:
Frequency used by Galaxy note :
Also known as Samsung GT-N7000, Samsung I9220
General 2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 900 / 1900 / 2100
4G Network LTE 700 (region specific)
Since your service provider uses 1700 and 2100, then it should work.. just activate your 3G network in your wireless settings.
Good luck
Click to expand...
Click to collapse
you sound like my brother... how do I do this?

i just want to make and receive calls I can live without internet for now!

Preaak said:
i just want to make and receive calls I can live without internet for now!
Click to expand...
Click to collapse
I am just trying to help here. I hope it will work
Try
Setting -> Wireless and network -> Mobile networks -> Network mode
choose automode... If it doesn't work then go ahead.. beat the kid.

Preaak said:
i just want to make and receive calls I can live without internet for now!
Click to expand...
Click to collapse
ok...the 1700/2100 is correct but like tmous they use the 1700 as the data so activating 3g is going to do nothing.... there is a 1700 freq in the chip, but it is locked hence the need for the custom radio.... btw that thread is in the general forum... as for making phone calls, well if it is unlocked it should make them just fine...
is it telling you something when you power it on? does it have signal strength?.... need a bit more info....

sagaff said:
I am just trying to help here. I hope it will work
Try
Setting -> Wireless and network -> Mobile networks -> Network mode
choose automode... If it doesn't work then go ahead.. beat the kid.
Click to expand...
Click to collapse
Thanks... do you know if it should be on GSM.. wdma.. or both?
sorry btw it has been a bad day... I feel a cold comming on too... beating the kid is gonna feel good...

kawgirlval69 said:
ok...the 1700/2100 is correct but like tmous they use the 1700 as the data so activating 3g is going to do nothing.... there is a 1700 freq in the chip, but it is locked hence the need for the custom radio.... btw that thread is in the general forum... as for making phone calls, well if it is unlocked it should make them just fine...
is it telling you something when you power it on? does it have signal strength?.... need a bit more info....
Click to expand...
Click to collapse
I get signal but it says... mobile network not available when I try to make a call... the notification bar says "emergency calls only"
Good thing because after I beat that kid he can call for help...

Preaak said:
I get signal but it says... mobile network not available when I try to make a call... the notification bar says "emergency calls only"
Good thing because after I beat that kid he can call for help...
Click to expand...
Click to collapse
Normal GSM Functions (Calls/SMS) should work on 100%
There is something wrong with either the phone or your SIM Card/Provider
Call Customer support and explain your problem and be sure to tell them that the problem is Calls/SMS and you are aware that 3G will/may not work!
Maybe they are blocking the international Notes for some reason?!
It never hurts to ask them!

You will NOT get 3G to work if your carrier uses 1700mhz for AWS. Tmobile and as far as I know Wind use 1700 AND 2100 for 3G data. Having just one band (in this case, 2100, will not cut it). In any event, you should still get 2G data and be able to call/text.

joshnichols189 said:
You will NOT get 3G to work if your carrier uses 1700mhz for AWS. Tmobile and as far as I know Wind use 1700 AND 2100 for 3G data. Having just one band (in this case, 2100, will not cut it). In any event, you should still get 2G data and be able to call/text.
Click to expand...
Click to collapse
is there anything I can do to get this to work other thank popping my sim card in?

OrionBG said:
Normal GSM Functions (Calls/SMS) should work on 100%
There is something wrong with either the phone or your SIM Card/Provider
Call Customer support and explain your problem and be sure to tell them that the problem is Calls/SMS and you are aware that 3G will/may not work!
Maybe they are blocking the international Notes for some reason?!
It never hurts to ask them!
Click to expand...
Click to collapse
how can test if this is problem with the phone?

I tried another sim card form rogers wireless and it works right away.
my sim card has "no service" then after 5 mins the icon changes for a stop sign with a live through it to actual bars.. the no service changes into emergency calls only.

Preaak said:
I tried another sim card form rogers wireless and it works right away.
my sim card has "no service" then after 5 mins the icon changes for a stop sign with a live through it to actual bars.. the no service changes into emergency calls only.
Click to expand...
Click to collapse
OK. Then your phone is OK. Call Mobilicity customer support and explain everything! Tell them that the phone works with Rogers SIM and not with yours!