I tried searching for an answer but couldnt find any. So when i use any sense/sense HD builds on my phone, data works for a bit, but then it'll get stuck with the 3g or H icon and the up arrow showing something is being uploaded. I can't use data then at all and the phone goes really slow and only way to fix it is be restarting the phone. It wont let me turn off mobile data either when that happens. So the phone just becomes unusuable, so i cant use sense builds anymore. didnt happen before, just started recently, last week or so. I dont understand. I'm on T-mobile, i use internet2.voicestream.com for my data and the epc.tmobile.com one for MMS in the APN settings. this worked before, but now im getting this problem. Regular android builds work fine.
What kernel are you using? Hastarin's newest ones work flawlessly for me. Have you tried updating your radio to 2.14 or 2.15? For your APN settings try this. Delete the ones you have and make just this one. It works perfect for me on sense and CM builds:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.english.t-
mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: WAP 2.0 (don't know if this is important)
MCC: 310
MNC: 260
APN Type: (leave this blank)
Also, it's normal to still get a couple of data drops (I get them VERY rarely) but I can fix them by turning airplane mode on and off. I hope this helps.
edge/GPRS work wery well in winmo but are too slow and unusable in android (even email refuses to sync). i tried changing roms but got nowhere. anyone aware of a perfect ROM/radio/kernel/PPP/RMNET combination that will allow for a usable EDGE connection.
thanks
to clarify. there is EDGE connection but its literary 10 times slower than EGDE on winmo and its very unreliable
fatso485 said:
to clarify. there is EDGE connection but its literary 10 times slower than EGDE on winmo and its very unreliable
Click to expand...
Click to collapse
Are you 100% positive you have the correct APN settings for your carrier? Carriers have different APN settings for thier different internet like your older imternet for dumb phones such as WAP and JAVA. You want the settimgs for GPRS.
the APN settings for 2G and 3G networks are the same so im sure its not that
does your device work fine on edge?
fatso485 said:
the APN settings for 2G and 3G networks are the same so im sure its not that
does your device work fine on edge?
Click to expand...
Click to collapse
Yeah my HD2 works great on Edge, and Edge is the only thing I can get in my local area right now. I literaly have to travel over a hundred miles from my house to get 3G. these are my APN settings
Name
T-Mobile US
APN
epc.tmobile.com
Proxy
<not set>
Port
<not set>
User name
none
Password
****
Server
*
MMSC
http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy
<not set>
MMS port
<not set>
MCC
310
MNC
260
Authentication type
<not set>
APN type
defualt,supl,mms
im on Mobily (Saudi arabia) and the apn for cell data (2g/3g) is : WEB1
i will have to try your ROM/kernel. are you Using ppp or rmnet?
can you use the microphone on the keyboard when you are on Edge? i cant. i always get network errors
Hello, I recently signed up with Straight Talk via AT&T and am not able to get my Data services to connect or send/receive any MMS. I have configured my APN settings multiple times now and actually just got off the phone with straight talk about this issue as well. They were no help.
I am using Straight Talks at&t network and my phone reads this under settings>about phone>status...
Mobile Network Type: HSPA:10
Service State: In service (I have 4 bars)
Mobile Network state: Disconnected
Also when I go to the *#*#4636#*#* menu, It says this...
GPRS service: Disconnected
GSM disconnects: ========DATA=======
How can I fix this and get data and mms to work??
If you find anything out, please tell us! I'm starting to think its something that is wrong with the phone...
interesting... I just joined straight talk today using ATT micro sim and i have the same issue... I also have full bars.
I used the following APN and it didn't work for me.
Straight Talk
APN: att.mvno
Port: 80
Proxy: not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
mms port: 80
MCC: 310
MNC: 410
I'm beginning to wonder if straight talk is starting block ATT micro sim activation..?
I was able to get on using their T-Mobile APN settings.
Straight Talk
APN: wap.tracfone
Port: 8080
Proxy: not set
MMSC: http://mmsc.tracfone.com
MMS Proxy: not set
mms port: not set
MCC: 310
MNC: 410
mclain1 said:
interesting... I just joined straight talk today using ATT micro sim and i have the same issue... I also have full bars.
I used the following APN and it didn't work for me.
Straight Talk
APN: att.mvno
Port: 80
Proxy: not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
mms port: 80
MCC: 310
MNC: 410
I'm beginning to wonder if straight talk is starting block ATT micro sim activation..?
I was able to get on using their T-Mobile APN settings.
Straight Talk
APN: wap.tracfone
Port: 8080
Proxy: not set
MMSC: http://mmsc.tracfone.com
MMS Proxy: not set
mms port: not set
MCC: 310
MNC: 410
Click to expand...
Click to collapse
On the AT&T on ST,
I didn't set the first Port you have listed after APN, I left it as "not set" instead of 80.
To the OP can you list what you set your APN to? Did you look at the Straight Talk thread in general area?
Also it might sound weird but check under Settings > Mobile Network Settings > Data enabled.
For some reason it wouldn't be checked for me when I was flashing a ROM or going back to stock ROM.
These are my settings:
Name: StraightTalk ATT
APN: att.mvno
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: not set
APN type: default,supl,mms
APN protocol: IPv4
Bearer: Unspecified
bitojoe said:
Hello, I recently signed up with Straight Talk via AT&T and am not able to get my Data services to connect or send/receive any MMS. I have configured my APN settings multiple times now and actually just got off the phone with straight talk about this issue as well. They were no help.
I am using Straight Talks at&t network and my phone reads this under settings>about phone>status...
Mobile Network Type: HSPA:10
Service State: In service (I have 4 bars)
Mobile Network state: Disconnected
Also when I go to the *#*#4636#*#* menu, It says this...
GPRS service: Disconnected
GSM disconnects: ========DATA=======
How can I fix this and get data and mms to work??
If you find anything out, please tell us! I'm starting to think its something that is wrong with the phone...
Click to expand...
Click to collapse
Here are the APN (Settings>Wireless & Networks.. More...>Mobile networks>Access Point Names) configuration I use to effectivly send/receive MMS:
APN: att.mvno
Proxy: Not set
Port: 80 (some report having better results not setting the Port, but It works for me this way)
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: 66.209.11.33
MMS Port: 80
MCC: 310
MNC: 410
Athentication type: PAP or CHAP
APN type: default,supl,mms (no spaces)
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
Be sure to Save, and Reboot after making changes.
(Also, delete the AT&T APN if its in the list... Click on it, then press menu discard)
mclain1 said:
...
I'm beginning to wonder if straight talk is starting block ATT micro sim activation..?
Click to expand...
Click to collapse
Why would the block something they sell and offer service through.
Its also noted on their site, that MMS may not work on some devices
"Updating your APN settings does not guarantee MMS (Multimedia/Picture Messaging) will work." Quoted from StraightTalk.com
I just got off the phone with Straight Talk and I bought a new AT&T micro sim card from Walmart. I asked if they are still supporting it, and they said absolutely, they will continue to. Just FYI
bitojoe said:
Hello, I recently signed up with Straight Talk via AT&T and am not able to get my Data services to connect or send/receive any MMS. I have configured my APN settings multiple times now and actually just got off the phone with straight talk about this issue as well. They were no help.
I am using Straight Talks at&t network and my phone reads this under settings>about phone>status...
Mobile Network Type: HSPA:10
Service State: In service (I have 4 bars)
Mobile Network state: Disconnected
Also when I go to the *#*#4636#*#* menu, It says this...
GPRS service: Disconnected
GSM disconnects: ========DATA=======
How can I fix this and get data and mms to work??
If you find anything out, please tell us! I'm starting to think its something that is wrong with the phone...
Click to expand...
Click to collapse
I had the same thing happen to me today and I am on ATT sim. I sent straight talk an email and they sent back a response asking me to call
855-222-2355. The agent had me make sure my data was on then I turned off the phone for 1 minute why she did something on her side. After that it started working again. I asked her what she did so the next time this happens I could just say this has happened before and this is how they fixed it. The agent stated to just call the number above and state that your data is not working and they will resolve the issue. No help, but that is what happened to me.
ropesguru said:
I sent straight talk an email and they sent back a response asking me to call
855-222-2355.
Click to expand...
Click to collapse
Same problem. Straight Talk has been working for months, and all of a sudden yesterday no data. I am lucky if I use data a handful of times a month, so I know I am not over any limits. I am glad I printed out Google maps before I left on my trip as a backup, because it was a 120 mile trek. I went to an AT&T store while on the road out of desperation and a person was kind enough to look at the phone and believes the hardware is OK and it is a Straight Talk issue. I am assuming the "Mobile Network State = Disconnected" I am getting is not a good thing. I will give them a call today.
EDIT: Just got off the phone with Straight Talk. They gave me new APN settings, and this is the first time since I have had Straight Talk (4 months) that I am able to get data at my house (It worked while on the road). It is also the first time I ever saw the little capital "H" near the signal icon, whatever that is. I am in quite a dead zone and previously could only use wifi. Yippee! I also see that "Mobile Network State = Disconnected" had nothing to do with getting data as it works now and it is still listed as Disconnected.
EDIT: These are the new settings that Straight Talk gave me:
Name: Straight Talk
APN: att.mvno
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: not set
APN type: not set
APN protocol: IPv4
APN roaming protocol: iPv4
Bearer: Unspecified
And these were my original settings
EDIT: As pointed out in a subsequent post below, these are the settings that the person in the AT&T store put in. He erased my original settings, which as I recall I got from the Straight Talk site or the sim card instructions.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: not set
Password: not set
Server: cingulargprs.com
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: Not set
MCC: 310
MNC: 410
Authentication type: not set
APN type: default,supl.mms
APN protocol: IPv4
APN roaming protocol: iPv4
Bearer: Unspecified
pjc123 said:
Same problem. Straight Talk has been working for months, and all of a sudden yesterday no data. I am lucky if I use data a handful of times a month, so I know I am not over any limits. I am glad I printed out Google maps before I left on my trip as a backup, because it was a 120 mile trek. I went to an AT&T store while on the road out of desperation and a person was kind enough to look at the phone and believes the hardware is OK and it is a Straight Talk issue. I am assuming the "Mobile Network State = Disconnected" I am getting is not a good thing. I will give them a call today.
EDIT: Just got off the phone with Straight Talk. They gave me new APN settings, and this is the first time since I have had Straight Talk (4 months) that I am able to get data at my house (It worked while on the road). It is also the first time I ever saw the little capital "H" near the signal icon, whatever that is. I am in quite a dead zone and previously could only use wifi. Yippee! I also see that "Mobile Network State = Disconnected" had nothing to do with getting data as it works now and it is still listed as Disconnected.
EDIT: These are the new settings that Straight Talk gave me:
Name: Straight Talk
APN: att.mvno
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: not set
APN type: not set
APN protocol: IPv4
APN roaming protocol: iPv4
Bearer: Unspecified
And these were my original settings:
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: not set
Password: not set
Server: cingulargprs.com
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: Not set
MCC: 310
MNC: 410
Authentication type: not set
APN type: default,supl.mms
APN protocol: IPv4
APN roaming protocol: iPv4
Bearer: Unspecified
Click to expand...
Click to collapse
Those original settings weren't for StraightTalk but for AT&T. Two totally different services.
---------- Post added at 10:00 AM ---------- Previous post was at 09:56 AM ----------
bitojoe said:
Hello, I recently signed up with Straight Talk via AT&T and am not able to get my Data services to connect or send/receive any MMS. I have configured my APN settings multiple times now and actually just got off the phone with straight talk about this issue as well. They were no help.
I am using Straight Talks at&t network and my phone reads this under settings>about phone>status...
Mobile Network Type: HSPA:10
Service State: In service (I have 4 bars)
Mobile Network state: Disconnected
Also when I go to the *#*#4636#*#* menu, It says this...
GPRS service: Disconnected
GSM disconnects: ========DATA=======
How can I fix this and get data and mms to work??
If you find anything out, please tell us! I'm starting to think its something that is wrong with the phone...
Click to expand...
Click to collapse
FYI the phone won't connect to mobile data until you are using it, its to save the battery. That's why it shows as disconnected in mobile network state. To verify this turn off wifi, if your connect to it, open a browser using your mobile data then check phone status.
kzoodroid said:
Those original settings weren't for StraightTalk but for AT&T. Two totally different services.
Click to expand...
Click to collapse
Thanks for spotting that. Those are not the original settings I put into the phone; I thought they didn't look right. Apparently yesterday, instead of creating a new APN set, the guy in the AT&T store overwrote my Straight Talk settings while testing out my phone (Not too bright). It really doesn't matter, as neither settings worked properly anyway. I am only getting 1 Mpbs download and 0.10 Mpbs upload at my house now (better than the zero I was getting before), but I am going to have to take a drive later to see what improvement I get.
kzoodroid said:
FYI the phone won't connect to mobile data until you are using it, its to save the battery. That's why it shows as disconnected in mobile network state. To verify this turn off wifi, if your connect to it, open a browser using your mobile data then check phone status,
Click to expand...
Click to collapse
I see.
EDIT: The highest data speed I am getting is 1.09 Mbps no matter where I go, even running SpeedTest while staring at a several cell towers (Where the signal strength gets better). I gather that is bad from the numbers I see elsewhere?
Bought my wife an I9505G. We have AT&T service in Denver, CO. When we got the device, it didn't have 4.3 on it, and it prompted soon after we had it on our WiFi. We went to a local AT&T store to get a new SIM card. We received a new SIM (as her old SIM was from a SGH-I777 Galaxy S2) and LTE is showing on the status bar. She has had issues receiving and sending MMS messages. Chomp was telling her that the APN settings were wrong. I had forgotten to put any APN settings in the phone, and the AT&T rep didn't enter any either. He probably thought that I'd do it since I bought the phone. So I Googled which APN settings to use. Here's what is selected now:
Name: AT&T PTA
APN: pta
Proxy: NOT SET
Port: NOT SET
Username: NOT SET
Password: NOT SET
Server: NOT SET
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN type: default,admin,fota,mms,supl,hipri
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4/IPv6
Bearer: Unspecified
MVNO type: None
What's strange is that if I turn off WiFi, I can send MMS picture messages from the phone and receive them on the phone. It's very odd. When I turn WiFi back on, I'm unable to send or receive MMS pictures on the GS4. Again, I'm running 4.3. My BaseBand version is I9505GUEUBMH5
Has anyone else seen this issue? Am I using the wrong APN for AT&T? Thanks!
EDIT: I'm adding my SpeedTest results using the app. 10.33Mbps Down, 2.59Mbps Up.
My wife was able to successfully send me an MMS picture message from her school's WiFi network. She confirmed she was able to surf on their WiFi first before sending the MMS. This really does point a finger at the DD-WRT firmware running on my WRT-54G Linksys router. This thread is the only thread I could find that sounded similar to my issue.
Also, I forgot to post what my APNs are currently. I found them in this thread.
Code:
**NOTE: All unmentioned fields should read "<Not set>".
APN 1 (Up to 3.5G HSDPA/HSUPA only, 7.2mbps):
Name: Cingular
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,fota,dun
APN 2 (Up to 3.75G HSPA+ only, 21mbps):
Name: AT&T HSPA+
APN: phone
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,dun
APN 3 (LTE, ALL THE mbps):
Name: AT&T LTE
APN: pta
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,hipri,internet
APN 4:
Name: Cingular MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: mms
APN 5:
Name: AT&T LTE MMS
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: hipri,mms
Has anyone seen this issue? Thanks!
Update
I've tried other APNs, but that wasn't solving the issue. Wife can send MMS on _any_ other network except ours. That's not an APN setting, that's a weird network issue. Based on the link I gave you guys in the first post, I thought, maybe DD-WRT was the issue. The DD-WRT device I have is only acting as an AP in my network. I have pfSense as the router for my network.
I just picked up a new Asus RT-AC66U yesterday, set it up as AP only and connected the wife's phone. Her phone wasn't sending or receiving MMS with the new AP. The phone still has 3 of 4 bars available right now when it won't send an MMS. Then I thought, let's take the pfSense box out of the mix. So I tried hooking the RT-AC66U up as the default router/firewall/AP. I reconnected both phones back to its 5GHz SSID. I was able to send and receive MMS pictures on the wife's phone. It started looking like an issue with my pfSense firewall. Then, I realized that my home network's IP range is 10.0.0.0/24. AT&T’s LTE network is also in the 10.x.y.z range. Its probably not the exact range I have at home, but its close. When I tried the Asus router, it defaulted to a 192.168.1.0/24 network. So I tried to set my pfSense box to the same range. I had issues with the router taking that range. It would serve out dhcp on that range, but I couldn't ping anything outside. I have no idea why. It got late last night, so I reset back to my default 10.0.0.0/24.
Today, I plan on backing up the pfSense config, issuing a factory reset and running stock at 10.0.0.0/24 and see if the issue still happens. If it does, I'll factory reset again, and try 192.168.1.1/24. We'll see which one works.
SOLVED!
I have finally solved the issue. I'm so happy it's fixed. For those that happen upon this thread, here's what I did:
Since I had nothing blocked in the firewall rules, and I had Outbound Manual NAT enabled that wasn't the issue. I was in the #pfsense channel, and someone happened to come in complaining about not a ping not resolving. Specifically, he was trying to ping:
Code:
ping some_DNS_name_on_internet
It was supposed to resolve to a PRIVATE IP address, in his case, 10.0.0.1. I could get it to resolve from my work connection (not behind pfSense). So I began pinging the MMSC and MMS addresses in the APNs I listed earlier. All of them resolved and/or responded, except one:
Code:
proxy.mobile.att.net
Behind the pfSense 2.1 firewall, it wouldn't resolve. From anywhere else (from the phone disconnected from WiFi, from my office network) that address would resolve:
Code:
$ ping proxy.mobile.att.net
PING proxy.mobile.att.net (172.26.39.1) 56(84) bytes of data.
^C
--- proxy.mobile.att.net ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1007ms
But look at the address it was resolving to! I thought that since I had disabled blocking RFC1918 on my WAN port and LAN port, the address would have resolved. It didn't. The user in #pfsense said that it's not a bug, but a feature of dnsmasq and that pfSense was "protecting us from ourselves". Very strange I thought. But what's even stranger, was the fact that AT&T was deliberately resolving a DNS name to an RFC 1918 address on the PUBLIC internet. My only guess is that the phone will try the WiFi first, find that this address resolves to 172.26.39.1 address, then use it's LTE radio to connect to the address since it's all on AT&T's network anyway. Probably a static route on the LTE radio? No idea.
Since it was clear that pfSense wasn't resolving this address correctly, I decided to put a "Host Over Ride" in the Services: DNS Forwarder. I added this:
Code:
proxy mobile.att.net 172.26.39.1 AT&T MMS Proxy
Once I did that, everything worked as expected. She can send and receive MMS. It was amazing. I've been struggling with this for a week, and now it's working. That also means I can go buy _me_ the same phone
I really hope that my struggles can help someone in the future.
Nice debug work!
Sent from my Nexus 7 using XDA Premium HD app
Thank you again!! I thanked you on the other forum but wanted to here as well so others that may experience this know it does fix it.
This must be an android 4.3 issue as my ATT GS4 running 4.2.2 doesn't experience this.
Thanks,
Mike
CNLiberal said:
SOLVED!
I have finally solved the issue. I'm so happy it's fixed. For those that happen upon this thread, here's what I did:
Since I had nothing blocked in the firewall rules, and I had Outbound Manual NAT enabled that wasn't the issue. I was in the #pfsense channel, and someone happened to come in complaining about not a ping not resolving. Specifically, he was trying to ping:
Code:
ping some_DNS_name_on_internet
It was supposed to resolve to a PRIVATE IP address, in his case, 10.0.0.1. I could get it to resolve from my work connection (not behind pfSense). So I began pinging the MMSC and MMS addresses in the APNs I listed earlier. All of them resolved and/or responded, except one:
Code:
proxy.mobile.att.net
Behind the pfSense 2.1 firewall, it wouldn't resolve. From anywhere else (from the phone disconnected from WiFi, from my office network) that address would resolve:
Code:
$ ping proxy.mobile.att.net
PING proxy.mobile.att.net (172.26.39.1) 56(84) bytes of data.
^C
--- proxy.mobile.att.net ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1007ms
But look at the address it was resolving to! I thought that since I had disabled blocking RFC1918 on my WAN port and LAN port, the address would have resolved. It didn't. The user in #pfsense said that it's not a bug, but a feature of dnsmasq and that pfSense was "protecting us from ourselves". Very strange I thought. But what's even stranger, was the fact that AT&T was deliberately resolving a DNS name to an RFC 1918 address on the PUBLIC internet. My only guess is that the phone will try the WiFi first, find that this address resolves to 172.26.39.1 address, then use it's LTE radio to connect to the address since it's all on AT&T's network anyway. Probably a static route on the LTE radio? No idea.
Since it was clear that pfSense wasn't resolving this address correctly, I decided to put a "Host Over Ride" in the Services: DNS Forwarder. I added this:
Code:
proxy mobile.att.net 172.26.39.1 AT&T MMS Proxy
Once I did that, everything worked as expected. She can send and receive MMS. It was amazing. I've been struggling with this for a week, and now it's working. That also means I can go buy _me_ the same phone
I really hope that my struggles can help someone in the future.
Click to expand...
Click to collapse
mjolsen said:
Thank you again!! I thanked you on the other forum but wanted to here as well so others that may experience this know it does fix it.
This must be an android 4.3 issue as my ATT GS4 running 4.2.2 doesn't experience this.
Thanks,
Mike
Click to expand...
Click to collapse
That or AT&T actually found this issue and forced Samsung to add it to TouchWiz. My buddy with the stock AT&T GS4 TW tested and didn't have the same issue either (behind a pfSense fw).
I wish I could help the other guy out. Hopefully, he starts pinging and finds a different DNS name that's not resolving.
Sent from my Nexus 7 using Tapatalk now Free
How do fix with DD-WRT instead of pfsense?
CNLiberal said:
SOLVED!
I have finally solved the issue. I'm so happy it's fixed. For those that happen upon this thread, here's what I did:
Since I had nothing blocked in the firewall rules, and I had Outbound Manual NAT enabled that wasn't the issue. I was in the #pfsense channel, and someone happened to come in complaining about not a ping not resolving. Specifically, he was trying to ping:
Code:
ping some_DNS_name_on_internet
It was supposed to resolve to a PRIVATE IP address, in his case, 10.0.0.1. I could get it to resolve from my work connection (not behind pfSense). So I began pinging the MMSC and MMS addresses in the APNs I listed earlier. All of them resolved and/or responded, except one:
Code:
proxy.mobile.att.net
Behind the pfSense 2.1 firewall, it wouldn't resolve. From anywhere else (from the phone disconnected from WiFi, from my office network) that address would resolve:
Code:
$ ping proxy.mobile.att.net
PING proxy.mobile.att.net (172.26.39.1) 56(84) bytes of data.
^C
--- proxy.mobile.att.net ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1007ms
But look at the address it was resolving to! I thought that since I had disabled blocking RFC1918 on my WAN port and LAN port, the address would have resolved. It didn't. The user in #pfsense said that it's not a bug, but a feature of dnsmasq and that pfSense was "protecting us from ourselves". Very strange I thought. But what's even stranger, was the fact that AT&T was deliberately resolving a DNS name to an RFC 1918 address on the PUBLIC internet. My only guess is that the phone will try the WiFi first, find that this address resolves to 172.26.39.1 address, then use it's LTE radio to connect to the address since it's all on AT&T's network anyway. Probably a static route on the LTE radio? No idea.
Since it was clear that pfSense wasn't resolving this address correctly, I decided to put a "Host Over Ride" in the Services: DNS Forwarder. I added this:
Code:
proxy mobile.att.net 172.26.39.1 AT&T MMS Proxy
Once I did that, everything worked as expected. She can send and receive MMS. It was amazing. I've been struggling with this for a week, and now it's working. That also means I can go buy _me_ the same phone
I really hope that my struggles can help someone in the future.
Click to expand...
Click to collapse
Does anyone know how to make the same above fix when using DD-WRT instead of pfsense?
Augestflex said:
Does anyone know how to make the same above fix when using DD-WRT instead of pfsense?
Click to expand...
Click to collapse
A quick Google search revealed these links:
http://www.dd-wrt.com/wiki/index.php/DNSMasq_-_DNS_for_your_local_network_-_HOWTO
http://www.dd-wrt.com/phpBB2/viewto...previous&sid=243a53e3e59317ddc85602bf85dfa997
CNLiberal said:
My wife was able to successfully send me an MMS picture message from her school's WiFi network. She confirmed she was able to surf on their WiFi first before sending the MMS. This really does point a finger at the DD-WRT firmware running on my WRT-54G Linksys router. This thread is the only thread I could find that sounded similar to my issue.
Also, I forgot to post what my APNs are currently. I found them in this thread.
Code:
**NOTE: All unmentioned fields should read "<Not set>".
APN 1 (Up to 3.5G HSDPA/HSUPA only, 7.2mbps):
Name: Cingular
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,fota,dun
APN 2 (Up to 3.75G HSPA+ only, 21mbps):
Name: AT&T HSPA+
APN: phone
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,dun
APN 3 (LTE, ALL THE mbps):
Name: AT&T LTE
APN: pta
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,agps,supl,hipri,internet
APN 4:
Name: Cingular MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: mms
APN 5:
Name: AT&T LTE MMS
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: hipri,mms
Has anyone seen this issue? Thanks!
Click to expand...
Click to collapse
Thank you!!! That worked on my dd-wrt, i manually added a dns entry pointing that hostname to that IP and I am now good. You rock.
CNLiberal said:
A quick Google search revealed these links:
http://www.dd-wrt.com/wiki/index.php/DNSMasq_-_DNS_for_your_local_network_-_HOWTO
http://www.dd-wrt.com/phpBB2/viewto...previous&sid=243a53e3e59317ddc85602bf85dfa997
Click to expand...
Click to collapse
Thanks, I had actually searched google several times, but did not realize that changing/adding an A record was the same as what I needed to do.
Thanks for the tip.
Augestflex said:
Thanks, I had actually searched google several times, but did not realize that changing/adding an A record was the same as what I needed to do.
Thanks for the tip.
Click to expand...
Click to collapse
So that worked for you, too? My Nexus 5 should arrive this week, and I'm hoping it'll "just work" with the APNs I listed above and the change on the firewall.
Please help the frustrated me
I put a T-mobile sim card on my VZW Note 3 and added an APN to for the mobile network, the 4G LTE flag shows up in the status bar as expected. The only problem is: when it uses data network instead of WIFI, all non-http network connections seem to get blocked and the only thing I can do is to use the browser to surf Internet. All other apps such as WeChat, Skype don't work at all. WeChat keeps reporting "Server access failure (1, -10087)".
I suspect there's a firewall built in the T-mobile data network but couldn't find any settings about it.
Does any expert here know to solve the problem?
Thanks!
I finally figured out that my Verizon note3 (N900V) can not use the T-mobile LTE network, but once I switched to 3G it worked fine.
This means for APN settings I have to use epc.tmobile.com instead of fast.t-mobile.com. I no longer remember the exact settings but I think it is close to the following (http://support.t-mobile.com/docs/DOC-1976):
Name: T-Mobile Data (or T-Mobile US)
APN: epc.tmobile.com
Proxy: <Not set>
Port: <Not set>
Username: None
Note: For the Username, enter "None" with the keypad. Do not leave it not set.
Password: <Not set>
Server: <Not set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: <Not set>
MMS port: <Not set>
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: <Not set>
APN type: default,supl,admin,dun,mms
Are you sure? I'm able to get 4G LTE on my note 3 when I'm outside. Skype works, facebook, and just about every other app except for wechat.
Already sim insert but no network plz soul