Database Users

AT commands on HTC Touch Pro

Hi,
I have an HTC Touch Pro and I would like to access its AT commands via Bluetooth.
I have successfully connected to the serial port via a simple terminal program. The phone can respond to "AT" with "OK" but all other commands respond with "ERROR".
Can I access the phone via AT commands this way?
Thank you!
Regards,
Mads

Software to control droid on PC?

Hello Guys.
I was wondering if there exists any software to control the droid from pc.
Could be very nice to write sms's from the pc

Numsefis said:
Hello Guys.
I was wondering if there exists any software to control the droid from pc.
Could be very nice to write sms's from the pc
Click to expand...
Click to collapse
The Droid??
This is X10 forum

There is a Program called "RemoteSMS" were you can write SMS from your Computer. To "control" the Phone from PC (install , uninstall *.apk etc) is a tool too (forgot the Name) but for that you need root :-d , which we dont have atm

Or you can use androidscreencast.jnlp, see attachment.
To launch open cmd and type: javaws androidscreencast.jnlp (Note, you must have adb installed. For further info download android sdk)
Forgot to mention your phone must be connected through USB

Murch said:
Or you can use androidscreencast.jnlp, see attachment.
To launch open cmd and type: javaws androidscreencast.jnlp (Note, you must have adb installed. For further info download android sdk)
Forgot to mention your phone must be connected through USB
Click to expand...
Click to collapse
Please give us a guide on how to get this thing to work.
I have downloaded the Android SDK and installed the Android 1.6 and 2.2 stuffs in the SDK program. But not sure what to do next.

Tom-Helge said:
Please give us a guide on how to get this thing to work.
I have downloaded the Android SDK and installed the Android 1.6 and 2.2 stuffs in the SDK program. But not sure what to do next.
Click to expand...
Click to collapse
If you have installed the Android SDK, open a command prompt and switch to the android tools directory:
for example:
Code:
cd D:\android\tools <-- this is the tools directory I use
Can also be:
cd X:\*path to SDK*\tools
then use
adb devices
This is to see if your device is connected through usb
You should see this:
Code:
List of devices attached
*Some product number* device
In my case:
List of devices attached
HT9A6LG05799 device
Then execute:
Code:
javaws androidscreencast.jnlp
And it should open a java screen and then show your android screen on the computer.
Also make sure you have the latest Java installed, which can be found here:
javadl . sun . com/webapps/download/AutoDL?BundleId=39502
One note though: the screen needs to be enabled, so not in sleep mode
I hope this works, it works for me, but I'm using an HTC Tatto instead of a SE X10, so I'm not able to check this for the X10 yet.

Murch, that doesn't seems to work for the Sony Ericsson XPERIA X10. I don't get up the device list to the X10 no matter what i do.
So can anyone else try this out with an X10 to see if this is the case?.
Nvm, i found out by looking here: http://www.esato.com/board/viewtopic.php?topic=196304

Did anyone get Appinventor by Google running on HD2?

Hey guys,
I was granted access to the beta of Android App Inventor and wanted to start playing around with that software and my HD2 running android. However, I cannot manage to get a connection to the phone via USB. (Selection: Connect to Phone in Block Editor does not work for me).
So, is there anyone working with App Inventor paired with HD2?
Thank you for your help and advice in advance,
jokeR

Download the Android SDK (if you haven't already), and install the package, "Usb Driver Package, revision 3".
Then plug in your HD2, if it doesn't auto-install do the following:
Right click my computer - manage - device manager,
find your HD2 in Other Devices/leo
Right click it, Update Driver Software
Browse my computer for driver software
In the text box: C:\android-sdk-windows\usb_driver (adjust accordingly)
Click next and it should install.

also only some builds have usb connection working i am using darkstones build and usb works fine

Currently I use this build: "shubCRAFT CM6RC2/Froyo" .
I still did not manage to complete a connection. The Block editor quits with an error "We made a mistake! Please help by reporting this bug:
Problem getting project defitions for phone: ...longurl..."
I will retry installing SDK and Extras and driver.
So, after reinstalling everything it still does not work:
"Leo" is listed in Devices as: "Android Composite ADB Interface" - is that the right driver?
I also tried to use a virtual Android device utilizing the SDK, but sadly that did not work as well. I have the Desktop of the virtual Android on my Screen, but clicking connect in Block editor does not connect to the virtual device (the Leo is unplugged in that scenario).
:/

make sure USB debugging is enabled in the application settings

Yes I have App Inventor. It's working OK for my on Darkstones build, but like you, I have issues with Shub's build.
For some reason or another - and I'm not sure how - I got it running just fine with no phone connected at all. I was able to complete the project and save it just fine. Maybe it was a bug...

I tried Darkstone's built, had USB debugging enabled, but it still did not work for me Don't know what to do next.
Anyone working with virtual devices or other builds that could work?
Thanks in advance for your help.

I9000 MODEM AT command set

Hi,
FYI. A list of all the AT commands the I9000 can handle.
AT&H
#, &A, &B, &C, &D, &E, &F, &H, &I, &K, &M, &R, &S, &V,
&W, &Y, A, B, E, H, I, L, M, O, P, Q, S0, S10, S12,
S19, S2, S3, S4, S5, S6, S7, S8, T, V, X, Z, \Q,
+BINP, +BLDN, +BRSF, +BVRA, +CACM, +CAEMLPP, +CALA,
+CALD, +CALM, +CAMM, +CAOC, +CBC, +CBST, +CCFC, +CCHC,
+CCHO, +CCID, +CCLK, +CCUG, +CCWA, +CCWE, +CEER, +CFUN,
+CGACT, +CGANS, +CGATT, +CGAUTO, +CGCLASS, +CGCMOD,
+CGDATA, +CGDCONT, +CGDSCONT, +CGED, +CGEQMIN, +CGEQNEG,
+CGEQREQ, +CGEREP, +CGLA, +CGMI, +CGMM, +CGMR, +CGPADDR,
+CGQMIN, +CGQREQ, +CGREG, +CGSMS, +CGSN, +CGTFT, +CHLD,
+CHUP, +CIMI, +CIND, +CLAC, +CLAN, +CLCC, +CLCK, +CLIP,
+CLIR, +CLVL, +CMEC, +CMEE, +CMER, +CMGC, +CMGD, +CMGF,
+CMGL, +CMGR, +CMGS, +CMGW, +CMMS, +CMOD, +CMSS, +CMUT,
+CMUX, +CNAP, +CNMA, +CNMI, +COLP, +COLR, +COPN, +COPS,
+CPAS, +CPIN, +CPLS, +CPMS, +CPOL, +CPUC, +CPWD, +CPWROFF,
+CR, +CRC, +CREG, +CRES, +CRLA, +CRLP, +CRSL, +CRSM,
+CSAS, +CSCA, +CSCB, +CSCS, +CSDH, +CSGT, +CSIM, +CSMP,
+CSMS, +CSQ, +CSSN, +CSTA, +CTFR, +C
+CUSD, +CUUS1, +FCLASS, +FDR, +FDT, +FKS, +FMR, +GCAP,
+GMI, +GMM, +GMR, +GSN, +ICF, +IFC, +IPR, +NREC, +SATE,
+SATR, +STKENV, +STKLBR, +STKPRO, +STKPROF, +STKTR,
+TRACE, +VGM, +VGR, +VGS, +VGT, +VTD, +VTS, +WS46, +XACT,
+XADDTRACE, +XALS, +XALSBLOCK, +XAPOXI, +XAPP, +XAUTOPLMNSEL,
+XBANDSEL, +XBARRPW, +XCALLREFUSE, +XCALLSTAT, +XCAOC,
+XCBS, +XCCBS, +XCEER, +XCELLINFO, +XCFC, +XCGCLASS,
+XCGEDPAGE, +XCHNSIM, +XCIND, +XCIPH, +XCONFIG, +XCOPS,
+XCOREDUMP, +XCRSM, +XCSIM, +XCSP, +XCSPAGING, +XCSSMS,
+XCTMDR, +XCTMS, +XDATACHANNEL, +XDEV, +XDEVICE, +XDIAG,
+XDNS, +XDRXSET, +XDTMF, +XEMC, +XEONS, +XETFT, +XGAUTH,
+XGCNTRD, +XGCNTSET, +XGENDATA, +XGPRSERRMAP, +XHANDSFREE,
+XHOMEZR, +XHSDUPA, +XIMS, +XL1SET, +XLCAPS, +XLGASSIST,
+XLGCPL, +XLGINFO, +XLGLOGLEV, +XLGMODE, +XLGNAV, +XLGNMEA,
+XLGNVRAM, +XLGPOS, +XLGTEST, +XLGTIME, +XLIN, +XLOG,
+XLOOPBACK, +XLQOS, +XLRMT, +XLRSUPL, +XLRTA, +XLRV,
+XLSR, +XLSRSTOP, +XMAGETBLOCK, +XMAGETKEY, +XMER, +XMULT
+XMUX, +XNMI, +XPIN, +XPINCNT, +XPOW, +XPPP, +XPROGRESS,
+XPWROFFDELAY, +XQNEG, +XRAT, +XREDIAL, +XREG, +XREL,
+XREMFPLMN, +XRFS, +XRLCSET, +XRRSET, +XSCELLLOCK, +XSECSTATE,
+XSELFRXSTAT, +XSERVICE, +XSIMCHG, +XSIMLG, +XSIMLOOPBACK,
+XSIMSTATE, +XSIMVALID, +XSIO, +XSLN, +XSMS, +XSTK,
+XSYSERR, +XTDEV, +XTERM, +XTESM, +XTFILTER, +XTOS,
+XTRACECONFIG, +XTRACEIP, +XTRACESYSTIME, +XUICC, +XUSBFLASH,
+XVTS
OK

I9000 modem access
I'm trying to access /dev/ttygs0 and test an AT command
with all possible serial speeds directly from a root console , but
modem seems dead... i cannot find informations how to enable it

Hi guys,
I have following problem with I9000 - when new SMS arrives there is no notification to serial port.
With command AT+CNMI=2,3,0,1,0 there should be such notifications, but they don't arrive to the serial port.
Can you advice me someting?

For people who have asked me.
I accessed the AT commands by putting the I9000 phone PDA/MODEM setting on MODEM and then connect a USB cable. The phone causes new COM/tty ports to appear on the PC when running Linux.

sending AT commands to my Galaxy S
Hi there,
Im trying to access my My Galaxy S (Android 2.3.4 XXJVQ) as a GSM modem and send it AT commands.
Im using Windows 7, I cant seem to get this to work, whether through a cable or Bluetooth i can see in the phone in devices & printers dialog and it does list its modem as a feature and tells me on which port its connected, for USB its COM4 for BT its COM6.
However if i use Hyperterminal it wont let me type anything into the textbox, it just doesnt respond.
I also wrote a small C# app based on code samples i found online but it never seems to respond to the commands i send to it. If i use COM3 for my "Thinkpad Modem Adapter" and i type into my console app: "AT" or "AT+GMM" for example i get a response back. if i use the port for the phone (COM4) i get nothing back...
I tried the trick with setting the phone from PDA to Modem using *#7284# but then when i connect the phone to the PC it wont recognize it and in the device manager it shows me a device called 7CDCs which it cannot find a driver for.
Ive also tried PDANet, i got the computer and phone connected together but i still cant issue an AT command at the modem...
Not sure whats the problem here...
If anyone can help me with id really appreciate it.
thanks!
Yoav.

You need linux to make it work.
You might be able to find a windows driver for it, but i don't have windows so i can't help there.

Can't test this just now as I'm at work, I did get through to the modem on windows 7 via usb. I'm sure I had to issue a reset command before I could do anything else.... ATZ maybe? I'll check it out when I get home.

Yeah, with the phone in Kies mode for usb connection and using PuTTY instead of hyperterminal (no longer provided with Win7) I got through to the modem on COM3. Whether the phone responds to all commands as expected seems to be another matter.

Thanks fahzat,
Ill give it a try again with Putty but i did try Putty yesterday as well as Hyperterminal and got to the same situation where it seems to be connected to the phone over the port but then it wont allow me to type anything into the command prompt... You chose the "Serial" type connection in the Putty initial screen right?

Correct, serial connection on COM3 (obviously your port may differ) with speed at 921600 (9600 seemed to work too). In the "Terminal" section set "Local echo" to "Force on" or you won't see what you're typing, only the response.

fahzat said:
Correct, serial connection on COM3 (obviously your port may differ) with speed at 921600 (9600 seemed to work too). In the "Terminal" section set "Local echo" to "Force on" or you won't see what you're typing, only the response.
Click to expand...
Click to collapse
Or make the first command you type ATE1

Thanks guys, it works. now im able to send commands to my Galaxy S.
What i really wanted to do was to manage to send SMS messages and see incoming messages but following the commands shown on a few tutorials dont seem to work with my phone.
Wondering if anyone knows how to do that with the SGS (I9000)???

[EDIT]
All info moved to here: http://forum.xda-developers.com/showthread.php?t=1471241
Thanks.

Achieve AT Command from Android
Hi All
I read that is not possible use directly in Android AT Command to debug the modem, but I was thinking to write an APP that using the USB Serial Virtual port in Android could send the AT Command directly to the modem. I read about external API to use serial communication.
Do you think this is possible??

alextreme said:
I read that is not possible use directly in Android AT Command to debug the modem,
Click to expand...
Click to collapse
ATdebug.apk is the answer : http://forum.xda-developers.com/showpost.php?p=19485757&postcount=1

mai77 said:
ATdebug.apk is the answer : http://forum.xda-developers.com/showpost.php?p=19485757&postcount=1
Click to expand...
Click to collapse
I know this...but it s not working with Samsung phones. Should I change the ROM with a Cyanogenmod version??

All you need to know here:
How to talk to the Modem with AT commands:
http://forum.xda-developers.com/showthread.php?t=1471241

how can we put the phone in modem mode?
thanks in advance

midas5 said:
For people who have asked me.
I accessed the AT commands by putting the I9000 phone PDA/MODEM setting on MODEM and then connect a USB cable. The phone causes new COM/tty ports to appear on the PC when running Linux.
Click to expand...
Click to collapse
Hi Midas5,
Could you be more specific?
a) So you set it to use: UART as MODEM and USB as MODEM??
(Those PhoneUtils settings are confusing!)
b) Which exact devices/ports appeared on your local machine?
c) Which exact devices/ports appeared on your phone?
d) Can you say anything about the device driver that you're using?
Thanks.
---------- Post added at 07:20 PM ---------- Previous post was at 07:14 PM ----------
yoavniran said:
If i use COM3 for my "Thinkpad Modem Adapter" and i type into my console app: "AT" or "AT+GMM" for example i get a response back. if i use the port for the phone (COM4) i get nothing back...
Click to expand...
Click to collapse
This is probably the wrong modem. It's most likely your laptop's built-in FAX/modem!
I tried the trick with setting the phone from PDA to Modem using *#7284# but then when i connect the phone to the PC it wont recognize it and in the device manager it shows me a device called 7CDCs which it cannot find a driver for.
Click to expand...
Click to collapse
This is THE problem!!
a) What (PC/linux) drivers to use when using your phone in "modem mode"?
b) How to send AT command from your phone terminal/shell? (I.e. what device is the right one(s)?

Nokia 5 TA-1053 Downgrade problem

I am trying to downgrade my Nokia 5 to android 7.1. Currently, it's running on android 9. I tried this method.
https://forum.xda-developers.com/t/...oreo-to-nougat-for-bootloader-unlock.3893053/
But Windows PowerShell was unable to detect any device. So, then I searched and installed some drivers like these
But no work.
Then I found a solution in here
nokia phone not detected using adb via windows PC
I have connected Nokia 1 TA-1066 phone to windows PC via USB cable after enabling USB debugging in setting->System->Developer Options. on the command prompt, I am unable to get the device after executing #adb devices. Do I need any specific...
forum.xda-developers.com
But there is no option called audio source, so I selected MIDI, also no work and platform-tool windows link is not working, so I searched google and downloaded this https://developer.android.com/studio/releases/platform-tools, and it didn't work either.
All after this, something came to my mind.
Does Nokia 5 needs an unlocked bootloader to do the downgrading process?
Otherwise, Is there another way to do this? Like I saw on YouTube, someone is using ntool to do the process, but I don't know is it safe or not.
And what could be wrong with ADB? Why it's not detecting my phone?
Thanks
—Nihad