Database Users

A little guidance please (delete permissions, etc.)

(Sorry for not posting actual links - the system won't let me because I'm still a "new user.")
I already rooted my Sprint Hero using this (thread 583291) guide and can successfully tether using the WiFi Tether app. Yay!
Now I want to delete and/or replace the boot up sound (boot.mp3 located in /system/media/bootscreen) When I try to delete it right now (either through adb shell on my computer or from within a file manager app on the phone itself) I get permission denied or "read-only file system."
I see two threads regarding busybox, superuser, and adb remount. Thread 591303 which is dated 11/28/09 and is just for busybox and Thread 593952 which is dated 12/03/09.
I'm not sure which of these two I need to install. If it's the latter which includes ADB remount and superuser as well as busybox, then I'm not sure if I am supposed to unzip them before pushing them to my phone.
Could anyone point me in the right direction based on what I want to do (delete files on my phone - ANY file I want)?
Thanks in advance for any help you can offer.

All you should need to do is:
Code:
adb remount
rm /insert file path/file
So yours would be
Code:
rm /system/media/bootscreen/boot.mp3

Mr. Biggz said:
All you should need to do is:
Code:
adb remount
rm /insert file path/file
So yours would be
Code:
rm /system/media/bootscreen/boot.mp3
Click to expand...
Click to collapse
will rm work without busybox?

As long as you can shell into the phone it should work. The rm command is to be run inside the shell.
So it actually should be
Code:
adb remount
adb shell
rm /system/media/bootscreen/boot.mp3

You want to install the busybox remount and superuser Rom if you want to run stock.
Or manually install busybox, superuser whitelist and adb remount
Biggz - looks like they are on stock. No adb remount.

gbhil said:
Biggz - looks like they are on stock. No adb remount.
Click to expand...
Click to collapse
Unfortunate, custom is so much better.

If you are on stock, do this:
Code:
adb shell
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mv /system/media/bootscreen/boot.mp3 /system/media/bootscreen/boot.mp3.old
exit
[you can also do rm /system/media/bootscreen/boot.mp3 instead]

gbhil said:
You want to install the busybox remount and superuser Rom if you want to run stock.
Or manually install busybox, superuser whitelist and adb remount
Biggz - looks like they are on stock. No adb remount.
Click to expand...
Click to collapse
successfully removed (rm) the boot.mp3 in the shell - Thank you for that. I do want to replace it with a different one (I'll use the same file name since the .xml file still refers to it) so I'll need the cp command and I've noticed that it's missing in shell. I'm assuming I need to install busybox to get this functionality. I'm not really sure I want to install a complete new ROM and I don't mind manually installing busybox, adb remount, etc. What does installing "superuser whitelist" and "adb remount" allow me to do? I'm not sure what their potential uses are?

I installed busybox and have the cp command functionality now (see above post) but now when I try to copy anything to the /system/media/bootscreen folder I get "cp: cannot create '/system/media/bootscreen/boot.mp3': Permission denied"
I type "mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system" after getting into shell and typing "su" and getting the "#" prompt and it takes successfully (this is the only way I was able to actually "rm" the original boot.mp3 file to begin with.
See anything I'm doing wrong?

Nope, that is correct.
/system is normally mounted as read-only, so you can't add or delete anything. The mount command remounts it as read-write, so you can modify it as root.

armyturtle said:
<snip> I'm not really sure I want to install a complete new ROM and I don't mind manually installing busybox, adb remount, etc. What does installing "superuser whitelist" and "adb remount" allow me to do? I'm not sure what their potential uses are?
Click to expand...
Click to collapse
Superuser whitelist is an application that warns you and asks for you to provide permission whenever an app tries to use the su binary to run as another user. You want this, as without it there's no way to know if an application runs as root.
Adb remount is a service that allows you to toggle the +RW bit on the /system/ partition through the shell. IIRC the one one floating around also kills color terminfo so you don't get all the extra chars on a windows PC when using the ls command. Just a matter of convenience.

jonnythan said:
Nope, that is correct.
/system is normally mounted as read-only, so you can't add or delete anything. The mount command remounts it as read-write, so you can modify it as root.
Click to expand...
Click to collapse
I can't create/copy anything after getting into the shell and remounting as read-write. From CMD prompt I type:
adb shell
and get:
$
Then I type:
su
and get:
#
This is where I type:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
Then trying to copy anything into the /system directory gives me:
Permission denied
It will let me DELETE anything I want from this folder (as confirmed by now deleting boot.gif just to check) but it won't let me cp (copy) anything to this folder. WHY?
What the heck?

try these commands for the boot mp3
Code:
cd/
cd /androidsdk/tools/
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
adb push directoryonpcwhereyourbootmp3is /system/media/bootscreen/
make sure that you rename the mp3 to boot.mp3 or it wont work anyways.
the other option (this is what I do) is find a bootscreen that you like (I use this one). open the zip file useing winrar or 7zip, navigate into the files where you see the boot.mp3 and drag in YOUR (now renamed) boot.mp3 close the window, put the zip file onto the root of your sd card, boot into recovery, choose flash from zip, flash the file and your good to go.

wtphoto said:
try these commands for the boot mp3
Code:
cd/
cd /androidsdk/tools/
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
adb push directoryonpcwhereyourbootmp3is /system/media/bootscreen/
make sure that you rename the mp3 to boot.mp3 or it wont work anyways.
the other option (this is what I do) is find a bootscreen that you like (I use this one). open the zip file useing winrar or 7zip, navigate into the files where you see the boot.mp3 and drag in YOUR (now renamed) boot.mp3 close the window, put the zip file onto the root of your sd card, boot into recovery, choose flash from zip, flash the file and your good to go.
Click to expand...
Click to collapse
tried this just now and still get "failed to copy 'C:\android-sdk-windows\tools\boot.mp3' to '/system/media/bootscreen/boot.mp3': Permission denied"
It's the /system folder... I can push to /data/local all day long, but anything in the /system folder is read only. How the hell can I change this?

/system/media/bootscreen/boot.mp3
Click to expand...
Click to collapse
if this is the code you are using then that could be your issue
the code line should look like this
Code:
adb push C:\android-sdk-windows\tools\boot.mp3 /system/media/bootscreen/
doing adb push C:\android-sdk-windows\tools\boot.mp3 /system/media/bootscreen/boot.mp3 says that you are trying to push the boot.mp3 to the directory bott.mp3 and there is no boot.mp3 directory the folder where you want the boot.mp3 is bootscreen. try the ubove code and see what happenes.

wtphoto said:
if this is the code you are using then that could be your issue
the code line should look like this
Code:
adb push C:\android-sdk-windows\tools\boot.mp3 /system/media/bootscreen/
doing adb push C:\android-sdk-windows\tools\boot.mp3 /system/media/bootscreen/boot.mp3 says that you are trying to push the boot.mp3 to the directory bott.mp3 and there is no boot.mp3 directory the folder where you want the boot.mp3 is bootscreen. try the ubove code and see what happenes.
Click to expand...
Click to collapse
Nope, was a typo on my part (here in the post, not when issuing the command). Still permission denied. I don't think it's actually mounting the /system folder as writable. Is there a way to check after issuing the remount command?
A quick command of "ls -l" at root prompt gives the following for the /system folder:
drwxr-xr-x root root 2009-09-21 06:30 system

after you run the remount command what does it say? does it say remount succeded?

After typing the remount command it simply repeats my command back at me and returns to the "#" prompt.

honestly at this point what I would try doing is do a back up then flash a custom rom like fresh 1.1 that has all the tools built into it. then go into the cmd prompt and cd to where sdk is then type adb remount and see what it says then adb shell and try to cp the file to that directory.
this is more a test than anything else.

wtphoto said:
honestly at this point what I would try doing is do a back up then flash a custom rom like fresh 1.1 that has all the tools built into it. then go into the cmd prompt and cd to where sdk is then type adb remount and see what it says then adb shell and try to cp the file to that directory.
this is more a test than anything else.
Click to expand...
Click to collapse
I'll try this - so you recommend trying fresh 1.1 then? I know it's just a test, but just in case I like the ROM and decide to stick with it, might as well try a really good one! I'll try this tomorrow - I'm beat! (Thanks again!)

[Q] Rooting Epic 4G for Noobs on a Mac?

Hi, I'm pretty geeky for a non IT person, but I have had a Blackberry up until now, so I am totally new to this Android set up. I have the Epic on Sprint; am frustrated with battery life, and would like to try and root the phone for 2.2 froyo. however most of the tutorials blow through the lingo (adb, huh?) in a way that is not explanatory for people who are new to this. Is their either a visual step-by-step guide for people or a more basic explanation of what is what and what to do somewhere? And, so far all I've seen is for Windows people. I have a Mac running snow leopard?
Help!

tromano said:
Hi, I'm pretty geeky for a non IT person, but I have had a Blackberry up until now, so I am totally new to this Android set up. I have the Epic on Sprint; am frustrated with battery life, and would like to try and root the phone for 2.2 froyo. however most of the tutorials blow through the lingo (adb, huh?) in a way that is not explanatory for people who are new to this. Is their either a visual step-by-step guide for people or a more basic explanation of what is what and what to do somewhere? And, so far all I've seen is for Windows people. I have a Mac running snow leopard?
Help!
Click to expand...
Click to collapse
I'm thinking of writing a script for Mac users, i don't have an epic but my xo-worker does and i rooted his today on my Mac, not as simple as the one click root but is doable.

that would be awesome; i guess the main things are 1. if you root it, can you upgrade to 2.2? 2. if you root it and upgrade, can you undo everything to factory?

Id be interested in this also
Sent from my SPH-D700 using Tapatalk

tromano said:
that would be awesome; i guess the main things are 1. if you root it, can you upgrade to 2.2? 2. if you root it and upgrade, can you undo everything to factory?
Click to expand...
Click to collapse
1. Rooting doesn't instantly make you 2.2 Upgradeable. 2.2 Froyo comes in different flavors for different manufactures. They lock the phone down with their systems so they phone cannot be unlocked, etc. Right now we are a bit far behind in getting 2.2 on the Epic. I think Sprint might even get it faster.
2. If you root you can ALWAYS go back to stock. They is a guide right here for returning to stock 2.1 and undo everything to factory.

It's kind of crude, but I wrote this for someone over at SDX-Developers to try. I think they were successful.
I don't use Macs much, but here's Joey's Permanent Root Method process I used to get it working under linux. The same method can be done through a Mac's Terminal if you're not intimidated by using command line.
First download Android-SDK for OSX.
http://developer.android.com/sdk/index.html
Once downloaded extract it and save to the root of your Mac's hard drive. Then rename the folder "android-sdk"
Next download the following files and save them to the /android-sdk/tools folder.
http://www.joeyconway.com/epic/root/joeykrim-root.sh
http://www.joeyconway.com/epic/root/jk-su
http://www.joeyconway.com/epic/root/rageagainstthecage-arm5.bin
http://www.joeyconway.com/epic/root/playlogo
Next open a terminal window. (command key + space then type terminal)
At the prompt, type "cd /android-sdk/tools"
If you save the files where I told you to, you shoud be able to copy and paste the commands into your terminal window. Do one line at a time and press enter after each pasting.
./adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
./adb push joeykrim-root.sh /sdcard/joeykrim-root.sh
./adb push jk-su /sdcard/jk-su
./adb push playlogo /sdcard/playlogo
./adb shell
chmod 755 /data/local/tmp/rageagainstthecage-arm5.bin
cd /data/local/tmp
rageagainstthecage-arm5.bin
exit
./adb shell
mount -t rfs -o remount,rw /dev/block/stl9 /system
cat /sdcard/joeykrim-root.sh > /system/bin/joeykrim-root.sh
cat /sdcard/jk-su > /system/bin/jk-su
mv /system/bin/playlogo /system/bin/playlogo-orig
cat /sdcard/playlogo > /system/bin/playlogo
chmod 755 /system/bin/playlogo
chmod 755 /system/bin/joeykrim-root.sh
exit
Click to expand...
Click to collapse

Issue for operation not permitted
I got all the way to the last paragraph of ./adb shell but cannot get the mount line to work....it says operatino not permitted. I put everything in the mac's root section just inside mac hd.
HELP!! I put hte phone in debug mode....did I need ot install any drivers from samsung....help!!!
-J

jayhover85 said:
I got all the way to the last paragraph of ./adb shell but cannot get the mount line to work....it says operatino not permitted. I put everything in the mac's root section just inside mac hd.
HELP!! I put hte phone in debug mode....did I need ot install any drivers from samsung....help!!!
-J
Click to expand...
Click to collapse
Were you able to get this working?

Root
No, I was not.

Check out this snippet of the instructions (I'll number them for ease):
<snip>
1.) cd /data/local/tmp
2.) rageagainstthecage-arm5.bin
3.) exit
4.) ./adb shell
5.) mount -t rfs -o remount,rw /dev/block/stl9 /system
</snip>
When you ran step 2, what happened? You may have to run the command this way with a dot and slash in front instead:
./rageagainstthecage-arm5.bin
When you ran step 4, did you get a $ or a #? If you got a #, step 5 should work properly. If you got a $, you'll need to do re-run the ./rageagainstthecage-arm5.bin step again. Re-running this step doesn't hurt anything. Good luck.

ss4rob said:
Check out this snippet of the instructions (I'll number them for ease):
<snip>
1.) cd /data/local/tmp
2.) rageagainstthecage-arm5.bin
3.) exit
4.) ./adb shell
5.) mount -t rfs -o remount,rw /dev/block/stl9 /system
</snip>
When you ran step 2, what happened? You may have to run the command this way with a dot and slash in front instead:
./rageagainstthecage-arm5.bin
When you ran step 4, did you get a $ or a #? If you got a #, step 5 should work properly. If you got a $, you'll need to do re-run the ./rageagainstthecage-arm5.bin step again. Re-running this step doesn't hurt anything. Good luck.
Click to expand...
Click to collapse
i'm stuck. i just got my epic and i'm trying to root it. i get to step 2 (using "./" before rage...cage) and terminal looks like it's running something. i type in "exit" when it finishes and it's as if my terminal logs me out. i can't reach step 4 and the screen on my epic has gone black by now. frozen up. i need to remove the battery to reboot and unfreeze my device. what am i doing wrong? am i missing a step somewhere? also, the "playlogo" file saves as ".sh" at the end, so in the terminal i manually enter that at the end of the file name just so that it can be read. "playlogo" without the ".sh" at the end cannot be found. is this what's causing it? any help would be greatly appreciated. i'm trying not to brick my phone!

Uninstall WaveSecure system app?

Hi I have been trying all evening to remove com.wsandroid.apk from my phone, using terminal but I simply cannot. I've tried many different commands and I'm just being told either permission denied, directory not found/not empty. I have a Wildfire which is obviously rooted. Please help me out, tearing my hair out here.

So you're using modaco custom rom?
Download the latest version of HTC Sync and install. This will also install the adb drivers. (I presume you use windows, if not, I apologise)
Download the Android SDK
Put the phone in fastboot mode (Power+Volume down) and plug it into your computer.
When the drivers are installed, use the command prompt to navigate to the tools folder within the android sdk folder.
Type the following commands, pressing enter at the end of each line:
adb shell
mount -o rw,remount -t yaffs2 /dev/block/mtdblock03 /system
cd app
rm -r com.wsandroid.apk
That should do it

I'm using the stock ROM but it is rooted with Unrevoked. I'll try these instructions anyway.

- Connect your phone to the PC
- Clear WaveScure's cache on the phone
- Open a command prompt
- go to run go to C:\androidSDK\tools and then run these 2 commands
1. adb remount
2. adb shell rm /system/app/*wsandroid*
Click to expand...
Click to collapse
I'm trying these settings, but when I get to adb remount, I get this error: remount failed: Operation not permitted
EDIT: I put the phone into recovery mode and mounted it and it said remount succeeded, I then followed step 2. both *wsandroid* and com.wsandroid.apk and it says that they cannot be found.
EDIT: Nevermind, deleted it

There's currently no write access to system partition using Unrevoked on Wildfire. So you can't remove it. You flashed it with update.zip? I'm not an expert (yet) but I assume the only way (or easiest way) to remove it is to flash your stock ROM again.

[Q] Editing Build.prop results in failure to boot [bricked]

As you may know, some Android games especially most Gameloft games are not compatible with the Kindle Fire. So in efforts to find a way to make certain Gameloft games to work such as Modern Combat 2 and Shrek Kart and others, I resorted to editing my build.prop in the systems folder to make my device compatible with the apps. So I copied the original build.prop file, renamed it, and saved it to my SD Card folder. I took the copy I made and I then replaced it with the build.prop from HTC Glacier. (I never knew what could possibly happen) So then to apply those settings you have to reboot the device. I rebooted the Kindle and now it won't boot up. It get's to the Kindle Fire screen when booting up but after several seconds it just shows a black screen. No physical damage has been incurred to it but I feel like my stupid mistake of modding the build.prop resulted in the Kindle Fire unable to boot up correctly. It also isn't recognized by the PC when I hook it up to a USB cable. So far I've found nothing that could help to solve this. I've seen a Factory Default Settings Cable which is a special cable to reverts the device to its factory default settings but I'm not too sure if that would work. I'm in desperate need of help as in I use my Kindle Fire for everyday work and play. Thanks.
EDIT: I've tried adb push and renaming and moving the build.prop into the /system/ but returns that it is a Read-File System Only. Also adb shell and su doesn't work as in it ends up with segmentation fault. I've tried to zergRush root it and permanently root it using KFU but it ends up with 'Cannot Access Package Manager. Is System running?' Also the mount -o rw,remount.....command doesn't work either as it says Permission Denied. All of this would be easy to accomplish if only it ADB allowed me to write onto the /system file.
EDIT**: The biggest issue I'm faced with is the permission settings that prevent my from editing anything. You cannot simply change it from RO to RW because apparently the ADB is not rooted. And I also can't root it because problems exist when accessing either Package Manager or Activity Manager. What I need is a way to access the /system files without a root (non-rooted). Either that or enable fastboot because I cannot access that either. On a reply on the second page is the resulting lines when changing bootmodes on the KFU.

Don't know how to fix your problem, but just wondering, did you just completely replace the kindle fire build.prop with the HTC glacier? Because you can't do that, it will, as you have learned, mess up your device.. Your supposed to edit the build.prop and just change a few things. Next time read up on the subject before deciding to mod the device you use everyday...

the cable you'r talking about is a "factory cable" it forces the kf to fastboot mode - it don't restore any settings !
you need fastboot mode to install fff (firefirefire - custom bootloader) and twrp (recovery)
do you allready have installed fff & twrp (or cwm) ?
if you have twrp installed and booted into then you have adb command available and can copy back the original build.prop

Did you remember to restore the read/write permissions to build.prop? It should be set to 644.

As already stated, your not supposed to replace the whole file, build.prop tells android which device you have, so now Android thought and configured itself to different hardware config. which is not available to it. Adb seems like the only option.

I should have really looked more into it before modifying the build.prop. I replaced the ENTIRE build prop with the build.prop of HTC Glacer. (I know, i know I was stupid) And referring to the factory cable, I don't think I'll resort to that: too time consuming. In regards to the last person that posted before me who said that my only option was ADB could you elaborate? Thanks for all your feedback.

gococogo321 said:
I should have really looked more into it before modifying the build.prop. I replaced the ENTIRE build prop with the build.prop of HTC Glacer. (I know, i know I was stupid) And referring to the factory cable, I don't think I'll resort to that: too time consuming. In regards to the last person that posted before me who said that my only option was ADB could you elaborate? Thanks for all your feedback.
Click to expand...
Click to collapse
Your going to have to use adb to basically remove the HTC Glacier build.prop and replace it with the original build.prop.
For example:
Adb remount <- allows you to mount system as rw
Adb pull /path-to-original/build.prop
Adb push build.prop /system
Adb shell chmod 644 /system/build.prop <- sets permissions to rwrr
Adb reboot
Sent from my Kindle Fire using xda premium

You dont have access to recovery? Either TWRP or CWM?

daggy1985 said:
Your going to have to use adb to basically remove the HTC Glacier build.prop and replace it with the original build.prop.
For example:
Adb remount <- allows you to mount system as rw
Adb pull /path-to-original/build.prop
Adb push build.prop /system
Adb shell chmod 644 /system/build.prop <- sets permissions to rwrr
Adb reboot
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
I tried doing that but it says something like Access Denied or Read-Only File System when i try to push the build.prop into it.

gococogo321 said:
I tried doing that but it says something like Access Denied or Read-Only File System when i try to push the build.prop into it.
Click to expand...
Click to collapse
Did you use the 'adb remount' command? Sometimes, when attempting to push a file to the system, I get the 'read-only file system' and I have to issue adb reboot followed by adb remount and then push the file again. It seems after a time the mount system as read write automatically goes back to read-only.
Sent from my ADR6400L using xda premium

Have you got TWRP or ClockworkMod?
Because you could flash a new rom then.

abd - root mode
Perhaps, running adb in root mode will
allow you to push the original build.prop
back. Then execute "adb remount / rw" to mount the
root directory as read/write. Hopefully you will be able to push
it then follow daggy1985's instructions.
* In Win 7, type "cmd " at the 'SEARCH/RUN' and hold
shift + ctrl while hitting 'Enter' to put yourself
in Admin mode which apparently makes adb work in root mode when you launch it.
* Xda-dev is the coolest site for Android that I have seen. Kudo's to everyone participating.

sum1nil said:
Perhaps, running adb in root mode will
allow you to push the original build.prop
back. Then execute "adb remount / rw" to mount the
root directory as read/write. Hopefully you will be able to push
it then follow daggy1985's instructions.
* In Win 7, type "cmd " at the 'SEARCH/RUN' and hold
shift + ctrl while hitting 'Enter' to put yourself
in Admin mode which apparently makes adb work in root mode when you launch it.
* Xda-dev is the coolest site for Android that I have seen. Kudo's to everyone participating.
Click to expand...
Click to collapse
Thanks but I have actually been running it from Administrator from the very beginning. I've used Kindle Fire Utility KFU and it says that ADB Server is Online and my Bootmode is 4000 but it says ADB root: No. And whenever I choose any bootmode whether it be Normal, Fastboot, or Recovery, it always shows this:
***********************************************
* Activating Normal (4000) *
***********************************************
Installing BurritoRoot, Courtesy of Jcase of TeamAndIRC!
1393 KB/s (1164225 bytes in 0.816s)
Error: Could not access the Package Manager. Is the system running?
Activating BurritoRoot...
Error type 2
android.util.AndroidException: Can't connect to activity manager; is the system
running?
Elevating the Shell...
* daemon not running. starting it now *
* daemon started successfully *
/data/local/tmp/BurritoRoot3.bin: permission denied
mount: Operation not permitted
mount: Operation not permitted
failed to copy 'files\rbfb' to '/system//rbfb': Read-only file system
Unable to chmod /system/rbfb: No such file or directory
Unable to chmod /system/rbfb: No such file or directory
mount: Operation not permitted
mount: Operation not permitted
***********************************************
* Root Activated *
***********************************************
The kindle is successfully running in root mode.
<idme> Invalid permission
reboot: Operation not permitted
Same goes for the Temp Burrito Root and installing FFF and TWRP. It always shows something about cannot access Package manager. I have no clue what the Package Manager even does but apparently I cannot find a solution to that.

I think you need to get a factory programming cable like we talked about on gtalk. I'm confident that will fix this.
Sent from my DROIDX using Tapatalk

I used android commander for windows, mounted system in TWRP and used android commander to copy a new working build.prop to the right place.
With a cable from my htc desire.

would make a little test:
issue "adb shell"
if you get a error message your up to a factory cable because the system shell is messed up and you have no possibility to get to fastboot mode to install fff & twrp
if you get a $ or # prompt you can resume and try "mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system" to mount system in read/write mode

daggy1985 said:
Your going to have to use adb to basically remove the HTC Glacier build.prop and replace it with the original build.prop.
For example:
Adb remount <- allows you to mount system as rw
Adb pull /path-to-original/build.prop
Adb push build.prop /system
Adb shell chmod 644 /system/build.prop <- sets permissions to rwrr
Adb reboot
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
hey, I've tried to remount my rooted galaxy y, fall in for same problem.but there show this message; "remount failed: Operation not permitted"
my device's usb debugging mode was off in last entire.
what I have to do now?

how did u edit build.prop in the first place if u don't have root and this might help
http://yaseminavcular.blogspot.com/2012/01/how-to-get-bricked-kindle-fire-back-to.html?m=1
Sent from my R800i using Tapatalk

Full Root for Nook Glowlight

It took some doing, but after following the instructions in this link:
http://forum.xda-developers.com/showthread.php?t=2559915
I was finally able to root my Nook Glowlight. The instructions are kind of sprawled out and extremely unclear so I will sum up.
As always, you will need the ADB. In order to install the ADB, you need the Java Development Kit and the Android Studio (formerly known as the Android SDK)
http://www.oracle.com/technetwork/java/javase/downloads/index.html
http://developer.android.com/sdk/installing/studio.html
How to obtain root via ADB: The ONLY way you can root is using Windows. I was successful on Windows 7 32 bit, but it may be possible on other versions.
step 1) install bootloader driver.
You need to grab the drivers from here (bnusbdrivers.zip):
http://forum.xda-developers.com/showpost.php?p=49665945&postcount=279&nocache=1&z=184593200683593
then, open the Device Manager (on Windows). Be ready to right click on the new device 'omap3660' that shows.
With the nook turned completely off, plug in a USB cable. you will have less than 3 seconds to right click the new omap3660 device that shows up in the system profiler.
If you were successful and you right clicked on it in time, manually install the Barnes & Noble USB driver (there are entries added to the generic Google drivers for both the TI Omap 3660 bootloader and the ADB device after you modify the uRamdisk later on)
***NOTE***
If you WEREN'T successful on your first try (took me THREE times to get to it in time), you aren't going to get another chance to install the drivers. At least not easily anyway, because after Windows tries to automatically install the drivers for the bootloader and fails, it will disregard the device any time it shows up after that. So, you are going to need to delete the registry entries that it created, which in my experience was easier said than done. Even admin access was not sufficient to make the necessary changes to the registry.
You will need to launch regedit.exe using another tool called psexec which is available here:
http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx
after you download the pstools package, copy those .exe files to C:\Windows\System32\ (in order to add them to $PATH in cmd.exe)
Then, once you've installed the pstools commands to C:\Windows\System32\, run cmd.exe as admin (right click it and select 'run as administrator') and then open regedit.exe with the following command
Code:
psexec -s -i -d regedit.exe
Then, once regedit is open you need to find the keys created by the Nook bootloader and delete them. The Nook bootloader's device ID is 0451:d00e
You are going to be looking in HKEY_LOCAL_MACHINE\Current Control Set\enum\usb\ for the keys with the bootloader's device IDs. There may also be keys generated in control set 001 and 002 as well. Delete all of those keys and then reboot your computer. Then with the nook power off completely, repeat the process from the first step. eventually you will be successful installing the bootloader driver.
Step 2) temporarily boot with uRamdisk-noogie
you need to download omaplink.exe from here:
http://www.temblast.com/android.htm
and you also need to download the four files which allow you to temporarily mount the boot partition; omap3_aboot.bin, u-boot-ng2-exp-v03.bin, uImage-ng2-130-stk and uRamdisk-noogie.
They are available here:
http://forum.xda-developers.com/showpost.php?p=49779966&postcount=285
download usbboot-ng2-images-noogie-v1.zip
The next part is easy.
Extract the .zip file and then fire up cmd.exe. cd into the directory of the newly extracted .zip
in the new working directory, enter the command
Code:
omaplink omap3_aboot.bin u-boot-ng2-exp-v03.bin uImage-ng2-130-stk uRamdisk-noogie
Then, with the Nook powered all the way off and omaplink running, plug it in and a few seconds later, after the device boots up all the way, you will be looking at the contents of the boot partition instead of the internal storage like normal.
Step 3) Edit uRamdisk
you will need to download bootutil.exe from here
http://www.temblast.com/android.htm
copy bootutil.exe to C:\Windows\System32
with the boot partition mounted, copy uRamdisk to your computer and extract the files init.rc and default.prop, eg;
Code:
bootutil /x /v uRamdisk init.rc default.prop
then using notepad++ (available here: http://notepad-plus-plus.org/) edit the files as follows
default.prop
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
and
init.rc
comment out lines 375 and 392-399
(do this by adding a # to the beginning of the line)
uncomment line 215
(do this by deleting the # at the beginning of the line)
save both files and then repack them into uRamdisk
Code:
bootutil /r /v uRamdisk init.rc default.prop
copy uRamdisk back onto the Nook, eject the disk and power off the device. Reboot and you should be able to connect to ADB via WiFi
eg;
Code:
adb connect 192.168.0.10
replacing '10' with whatever IP your Nook is grabbing from your router.
Step 4) Full Root
at this point, you have root access via ADB only. You will not have root access in any apps like Root Explorer, Terminal, TiBackup, etc.
In order to finish PROPERLY rooting your Nook, you need to install 'su' to /system/bin/ and install the superuser.apk
Code:
adb connect 192.168.0.10
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
reboot your device one more time and then you will be fully rooted.
*** Note ***
this devices firmware seems to be a strange hybrid between donut and eclair, although it purports itself to be Android 2.1. The Superuser.apk and su binary came from an old Cyanogenmod 4.6 build in case anyone was wondering (Android Donut). The ones from Cyanogenmod 5 (Android Eclair) do not work. you will get the 'install failed older sdk' error.

installing busybox
I tired installing busybox by using the stericson busybox pro.apk. It would always freeze at 6.47%.
I figured out that if I grabbed an older version of the busybox binary and pushed it to /system/xbin manually and then chmodded it to the proper permissions, auto updates and proper symlinking work using the busybox app
Code:
adb shell mount -o remount, rw /system
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Then reboot, and run the busybox app to update and create symlinks.
enjoy!

installing nano and bash
Code:
adb connect 192.168.0.10
adb shell
mount -o remount, rw /system
adb push nano /system/xbin/
chmod 6755 /system/xbin/nano
adb push bash /system/xbin/
chmod 6755 /system/xbin/bash
bash
mv /system/bin/sh /system/bin/sh.bak
ln -s /system/xbin/bash /system/bin/sh
chmod 6755 /system/bin/sh
adb push profile /system/etc/
adb push terminfo /system/etc/
and then in terminal emulator under 'Preferences' change the initial command to
Code:
export TERMINFO=/system/etc/terminfo;export TERM=linux;export HOME=/sdcard;
and finally
Code:
adb push bashrc /sdcard
adb shell
mv /sdcard/bashrc /sdcard/.bashrc
exit
nano works just fine via ADB, but because of lack of 'ctrl' key (and physical buttons to assign it to) you won't be able to write files (ctrl+o) using the terminal on your nook. But between having full proper root access, busybox, a proper bash terminal emulator and nano for editing config files, this should REALLY extend the usefulness of your Nook Glowlight. It should work just fine on other versions of Nook too.

Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.

As far as remounting /system as ro, I would HIGHLY recommend just rebooting at this point, otherwise your nook might be stuck in a weird pseudo-rooted state. Probably won't cause any problems, but why risk it?
Thanks for clarifying the line number. I will make the appropriate edits to my instructions. I was working off the top of my head and couldn't remember what exact line the ADB over TCP config was, as I just used ctrl+w '5555' to find it myself.
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
darz said:
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
Click to expand...
Click to collapse

N00b-un-2 said:
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
Click to expand...
Click to collapse
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again

darz said:
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
Click to expand...
Click to collapse
Sorry for the really noob question, I have rooted, wifi adb running and installed apps as per your instructions, but I can't seem to access any of it on the nook. How can I get access to the launcher I installed?
You mentioned pre-edited images, do any of those come with the apps I need to get access to a custom launcher?
Cheers,
Dariusz
==============
Updated: All sorted
==============
For some reason had some issues with ADW launcher, Launcher pro worked fine.
ps I think I made a mistake with the su step I suggested, if you run a one line shell command I don't think it keeps su privileges, so I believe you need to run commands within the shell as per below:
adb shell
mount -o remount, rw /system
/system/bin/su
mkdir -p /system/xbin
exit
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk

Noob
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?

The above instructions from N00b-un-2 should work fine running a vm with parallels on your Mac.
OB
Sent from my SPH-D710VMUB using Tapatalk 2

valentin1985 said:
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
Click to expand...
Click to collapse
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]

darz said:
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
Click to expand...
Click to collapse
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?

thenookieforlife3 said:
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
Click to expand...
Click to collapse
So far so good,but now what?

valentin1985 said:
So far so good,but now what?
Click to expand...
Click to collapse
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.

thenookieforlife3 said:
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
Click to expand...
Click to collapse
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.

valentin1985 said:
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
Click to expand...
Click to collapse
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.

thenookieforlife3 said:
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
Click to expand...
Click to collapse
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there

N00b-un-2 said:
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
Click to expand...
Click to collapse
Well, as I ONLY use Windows and Powershell ISE has a nice-enough layout for my purposes, I use it. That's why I gave a tip on it.

Actually on a lot of installs just typing adb in the command console won't work either unless it's got the path variable set up correctly, I find it easiest to just right click and choose run as administrator, no need for the path to be setup.
OB
Sent from my SPH-D710VMUB using Tapatalk 2

FW 1.2.1
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?

real-6 said:
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
Click to expand...
Click to collapse
This rooting procedure is for the new Nook GlowLight with firmware 1.3.1. Your device is a Nook Simple Touch with GlowLight, which can be rooted very easily using the rooting package here.