Database Users

HTC HD2 HaRET for Android Help!!!!!!!

Hi,
when i tried running the Haret soft ware on my phone with the defult.txt document i kept receiving PLEASE SET START OF RAM (RAMADDR).
So i opened the default doc
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
but when i added
set RAMADDR 0X10000000
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
and tried running the Haret i get a whole new error message saying
terminating Haret due to unhandled exception
what does that mean. Please help and Thanks in Advance.

just making sure... but are you running it from your sd card?

im sorry but how hard is it to read the post FAQ & Instructions on hd2 android discussion?
download > extract > copy paste into sd card > run Haret and ur done

OP: you have the wrong device type (mtype) specified... Leo = 2524. mtype 1667 = HTC Kaiser, I believe...
set mtype 2524
set ramaddr 0x20000000
set ramsize 0x0fc00000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline ""
boot
If you have a Leo (HD2), then you grabbed the wrong startup (and likely wrong HaRET version)

Haret
My T8585 won't boot with
set cmdline ""
It has to be
set cmdline "mem=128M"
Don't understand why.

miksi said:
My T8585 won't boot with
set cmdline ""
It has to be
set cmdline "mem=128M"
Don't understand why.
Click to expand...
Click to collapse
check your radio.
I had this problem after flashing an official ROM. Took me ages to notice it had installed a lower Radio

Assuming you have gotten andoird working - why dont you just use this setting
set RAMSIZE 0x1A000000 (412MB) = 32*7
HD2 has 484MB right
I Tried 0x1C000000 - but that bum'd out .. so reducing it by 32MB , (maybe the working memory needed for the loaders to work ? .. who knows) ..
works fine now ..

uhmmm....it should be called startup.txt not default.txt, that's a good place to start (no pun intended)

Here is my issue
Downloaded the American Android 2.3 for TMOUS->Extracted Android folder to blank SD card /sdcard/Android->Opened up file manager on HTC HD2 /sdcard/Android and ran clrcad.exe got the untrusted popup clicked okay->Ran haret.exe got popup again clicked okay then saw a few white command lines (maybe 5) then the green HTC logo appears and sits there for ever. I let it sit for 30 min and no change had to pull the battery and restart windows. Phone is up to date only difference might be is it has been unlocked through T-Mobile. Does anyone know how to avoid this?

Yeah i got the same problem, tryed to change the, rel_path location in the, startup.txt but nothing helps :/

war3s said:
Yeah i got the same problem, tryed to change the, rel_path location in the, startup.txt but nothing helps :/
Click to expand...
Click to collapse
If you find a solution elsewhere let me know, I'm still looking. Are you trying to install the American Android 2.3 Gingerbread ROM? That is the only one I have tried because I have heard it's the best with fewest bugs.

Stephducated20 said:
Hi,
when i tried running the Haret soft ware on my phone with the defult.txt document i kept receiving PLEASE SET START OF RAM (RAMADDR).
So i opened the default doc
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
but when i added
set RAMADDR 0X10000000
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
and tried running the Haret i get a whole new error message saying
terminating Haret due to unhandled exception
what does that mean. Please help and Thanks in Advance.
Click to expand...
Click to collapse
me too have same problem please help any one

[q] help me with walk through please?????

i have a 1024 flash size after i download the hspl to my phone, what is the next step after that. if i can have the right roms, or builds please

http://forum.xda-developers.com/showthread.php?t=768048
here is a android build and all info on what windows rom and radio to use all in first and second post

another question??
Do you keep your dpi_res or lcd_res to 180? or do you change it to 240, another thing the gpd is it suppose to look like this
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us.pool.ntp.org"
boot

last question
after i download hspl3 to my phone and i keep my radio at 2.10 what are the steps after installing your program is it put it directly on your sd card and load if from there or what???

phillycannon19 said:
Do you keep your dpi_res or lcd_res to 180? or do you change it to 240, another thing the gpd is it suppose to look like this
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=Android data_size=2048 lcd_res=180 conn_type=ppp kernel_type=axi gps_zone=us.pool.ntp.org"
boot
Click to expand...
Click to collapse
My dpi is at normal 240 and you would have to look up your own GPS settings
Sent from my HTC HD2 using XDA App

phillycannon19 said:
after i download hspl3 to my phone and i keep my radio at 2.10 what are the steps after installing your program is it put it directly on your sd card and load if from there or what???
Click to expand...
Click to collapse
If you read the first two post on that thread he tells you exactly what to do
Sent from my HTC HD2 using XDA App

i read the `st to post but it didn't explain the steps, but i install hspl, then i install my radio, after that what is the next step????

--------------------------------------------------------------------------------
i read the first two post but it didn't explain the steps, but i install hspl, then i install my radio, after that what is the next step please???? you been a good help i will definitly donate to you thank tou

at the bootom of first post he tells what he is using
ChuckyDroid Rom (with FD DriodBoot cooked in) and radio 2.12.50

http://forum.xda-developers.com/showthread.php?t=734238
chuckydroid rom

[Q] Android folder renaming

Hi all,
now that there so many android builds released every now and then, why is it not possible to put multiple android roms on SD cards with different release names like :
- Android Mdeejay Desire HD
- Android Mdeejay Evo sense
_ Android Mdeejay Glacier
and then choose from withing WINMO to boot any of them instead of changing SD cards or deleting and pasting ......
is it a HARET thing ?
can this be solved ? or developed ?
Thanx.

You can, I do it all the time
Sent from my HTC HD2 using the XDA mobile application powered by Tapatalk

typongtv said:
Hi all,
now that there so many android builds released every now and then, why is it not possible to put multiple android roms on SD cards with different release names like :
- Android Mdeejay Desire HD
- Android Mdeejay Evo sense
_ Android Mdeejay Glacier
and then choose from withing WINMO to boot any of them instead of changing SD cards or deleting and pasting ......
is it a HARET thing ?
can this be solved ? or developed ?
Thanx.
Click to expand...
Click to collapse
This is possible. First you must rename the android folders like you mentioned. Then also edit the startup.txt now its set cmdline "rel_path=Android" to cmdline "rel_path=Android Mdeejay Desire HD" etc

Thank you Henv I'll do it now

And for your own convenience, use a multiple boot loader found here or here

Renamed 2 Rom versions and changed the start up file.... they won't boot...stuck on first splash screen HTC.
this is my startup files :
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "nand_boot=0"
boot
i don't have cmdline "rel_path=Android"

typongtv said:
Renamed 2 Rom versions and changed the start up file.... they won't boot...stuck on first splash screen HTC.
this is my startup files :
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "nand_boot=0"
boot
i don't have cmdline "rel_path=Android"
Click to expand...
Click to collapse
You must put my line into you're cmdline. So it will be
set cmdline "rel_path=Android nand_boot=0" where you edit android with the name youre give your folder

so i should not erase the nand_boot=0 ?

typongtv said:
so i should not erase the nand_boot=0 ?
Click to expand...
Click to collapse
That's correct. You can take the line I earlier mentioned and only change android and replace the line in you're startup
Sent from HD2

I tried it all, i tried carefully and i even tried the multi loader app....i tried with many different roms....
Not working......
maybe this is the one thing my HD2 won't do
Anyone had the same problem ?

still wondering why is it not working with me .....!

typongtv said:
still wondering why is it not working with me .....!
Click to expand...
Click to collapse
You can try the next thing. Rename your startup.txt. Make a new startup.txt fill this txt with the next things
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=AndroidMdeejayDHD nand_boot=0"
boot
Rename youre android folder to AndroidMdeejayDHD. Maybe space are not allowed
If this work you can edit the name AndroidMdeejayDHD to another version of android. Als o make that folder that name

henv said:
You can try the next thing. Rename your startup.txt. Make a new startup.txt fill this txt with the next things
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=AndroidMdeejayDHD nand_boot=0"
boot
Rename youre android folder to AndroidMdeejayDHD. Maybe space are not allowed
If this work you can edit the name AndroidMdeejayDHD to another version of android. Als o make that folder that name
Click to expand...
Click to collapse
Thanx henv...I'll try that.

[Q] Isiah Honeycomb Android freezes on HTC Logo

Hi Guys,
I hope you can help me on this one..
I am trying to install on SD Isaiah12345 CM7 Honeycomb ROM on this link:
http://forum.xda-developers.com/showthread.php?t=1069771
I copied the ROOTFS and Startup.txt from SD Folder to the honeycomb folder.
Click CLRCAD then HARET, it boots up but stock in green HTC LOGO.
I do have a previous Android folder which i am using however since the startup.txt is directed to honeycomb folder i think should be no issue.
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path=honeycomb gps_zone=us nand_boot=0"
boot
please advise thanks..

you must copy the whole honeycomb folder to your sd. then you will not face any problem,i think

solved already thanks..

Berge, what was the fix?

[Q] Strange keyboard at the top of the screen

Hi there!!
I've just installed the Xdandroid FRX07 version on my HTC Touch HD and everything went fine, but from the begining of the installation an small keyboard appears at the top of the screen and it remains there.
I can't see what is behind and I don't know how to take it out.
Can you please help?? I attach a picture...
Thank you very much

moved to the android section

What kernel are you using? Try changing it!

nmugurel2003 said:
What kernel are you using? Try changing it!
Click to expand...
Click to collapse
lolwut?
It has nothing to do with your kernel. OP, please paste your startup.txt in code braces. [ code] text goes here [ /code]
Code:
Like this
Anyhoo, there's a setting in thar
Code:
msmvkeyb_toggle=off
That if it's set to on (or not set) you'll see that virtual keyboard.

I added another line in the startup.txt:
Code:
set cmdline "msmvkeyb_toggle=off"
so my startup.txt looks like this:
Code:
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2030
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 msmvkeyb_toggle=off msm_blackstone_pad.vibrate=1 gsensor_axis=-2,-1,3 pm.sleep_mode=1 physkeyboard=blac"
set cmdline "msmvkeyb_toggle=off"
boot
However, it still appears when I run FRX07.1 from a directory.
When I run root of the microsd, there is no keyboard.
However, for some strange reason, without the second "set cmdline" to toggle off, the keyboard appears even if I run from root.