Related
So, this Black Legend...does the metal scratch easily? Say if you drop it, will it get a silver scratch in the "paint" or anodization? Or is it black underneath as well?
yes it does.... it's still aluminum after all... the silver colour will show for deep scratches or nicks, however, dents are ok if not scratched. Just think of it as a piece of silvery metal cover with a thin layer of black paint (of course it's not paint, it's whatever process you call it for anodizing the black colour element on the aluminum)
Just what I thought.....so I'm not getting it, even though it's at 50% off retail price.....knew it had to be for a reason.
Where can you buy it from in black? Might buy another especially if it is 50% off
Sent from my HTC Legend using XDA App
Having a black one - so far really happy no one scratch.
Any Black Legend owners can upload the pictures of their phone? It is not available in my country. A sad thing indeed.
ojessie said:
Having a black one - so far really happy no one scratch.
Click to expand...
Click to collapse
Where did you get it?
i just brushed the metal bezel with soft soft sandpaper now it looks like new, it was showing signs of wear so after brushing it, it looks much nicer, I hate all those shiny bezel as they get scratched easily
hykhleif said:
i just brushed the metal bezel with soft soft sandpaper now it looks like new, it was showing signs of wear so after brushing it, it looks much nicer, I hate all those shiny bezel as they get scratched easily
Click to expand...
Click to collapse
Would try it in the morning, thanks!
Sent from my GT-N7000 using XDA
size of sand paper or what ever that metric is used to classified sand paper
Sent from my GT-N7000 using Tapatalk 2
Any pictures to show what it looks like? Thanks!
I'm pretty sure the Note doesn't have a metal bezel...
pboesboes said:
I'm pretty sure the Note doesn't have a metal bezel...
Click to expand...
Click to collapse
Yes. It is just coating.
You probably would get more scratches by sandpaper.
i will upload pictures tomorrow, i used a sponge with its side had such a fine fine coating of somthing that feels like sand paper ( i will post its picture too )
what ever the bezel is made of it had now a brushed look, finally from now on i don't care if it gets scratched or not as I can brush it off again any time.
the keys coating after brushing became black which added a nice look to the brushed bezel
I'm not sure, but my old HD7 got scratched on the power and volume buttons and eventually rusted. I think if you take off or cause any weakness in the covering it will oxydize and rust, even if it is metallic paint. I really wouldn't suggest doing this to your device. It may look good now but there's no guarantee it will stay that way.
Sent from my GT-N7000 using XDA
On the international version I have, the bezel is just a chrome paint. Its a very fine layer and has chipped off in a couple of places with the same black underneath. Wouldn't recommend scratching/sand papering it.
Sent from my Paranoid Android GT-N7000. It doesn't get much better than this!
SpyderTracks said:
On the international version I have, the bezel is just a chrome paint. Its a very fine layer and has chipped off in a couple of places with the same black underneath. Wouldn't recommend scratching/sand papering it.
Sent from my Paranoid Android GT-N7000. It doesn't get much better than this!
Click to expand...
Click to collapse
Yup, same here. Wouldn't do it unless you want a black bezel. An ugly one.
Sent from my GT-N7000 using xda premium
hykhleif said:
i will upload pictures tomorrow, i used a sponge with its side had such a fine fine coating of somthing that feels like sand paper ( i will post its picture too )
what ever the bezel is made of it had now a brushed look, finally from now on i don't care if it gets scratched or not as I can brush it off again any time.
the keys coating after brushing became black which added a nice look to the brushed bezel
Click to expand...
Click to collapse
tommorrow came and went....pics ready?
jeffs99 said:
tommorrow came and went....pics ready?
Click to expand...
Click to collapse
He never said where he was going to upload it
Maybe "Friend" him on Facebook?
Kangal said:
He never said where he was going to upload it
Maybe "Friend" him on Facebook?
Click to expand...
Click to collapse
Lol
Sent from my Paranoid Android GT-N7000. It doesn't get much better than this!
kyrirhcp said:
I'm not sure, but my old HD7 got scratched on the power and volume buttons and eventually rusted. I think if you take off or cause any weakness in the covering it will oxydize and rust, even if it is metallic paint. I really wouldn't suggest doing this to your device. It may look good now but there's no guarantee it will stay that way.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
hi everyone well I actually after 1 day of brushing the bezel I regretted it, as said above I noticed it started to look ugly thanks god I had received a replacement bezel new from ebay, so immediately i took off and put the new bezel.
I always ask myself why companies put those cheap bezels that are easy to get scratched in the first place, what a shame on them
Damn I chipped my HTC one today and its black, Now i can see a silver chip at the top left corner, anything can be done to cover the chip?
What happened exactly? Did you drop it or scratch it? I have heard people saying you can use some permanent marker to cover it.
Sent from my GT-I9305 using xda app-developers app
h.han said:
What happened exactly? Did you drop it or scratch it? I have heard people saying you can use some permanent marker to cover it.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Used black sharpies more than once but it rubs off after a few days
I used car touch up paint when my white evo was chipping. Matched the color and it has a nail polish like applicator. Worked good and It was glossy when it dried.
Sent from my HTC One X using xda app-developers app
Seems like either the anodization is very thin or the sharp edges make it easy to chip...
they cant chip by themselves!
sorehm said:
Damn I chipped my HTC one today and its black, Now i can see a silver chip at the top left corner, anything can be done to cover the chip?
Click to expand...
Click to collapse
picture please
Yeah picture please...
I chipped my silver One on the edges of the aluminium and edge of the screen. All because of trying to do many things at once when walking.
Riyal said:
Yeah picture please...
Click to expand...
Click to collapse
+1 Yeah picture please...
At least you got a black one... lol
Like to see pics, though I'm probably going with the silver anyway.
I'm curious to see pics of it as well, would be nice to have an idea how bad the chipping looks, since I've ordered a black one as well .
sorehm said:
Damn I chipped my HTC one today and its black, Now i can see a silver chip at the top left corner, anything can be done to cover the chip?
Click to expand...
Click to collapse
pics or didn't happen lol.
just want to see how it looks coz I orderd a black one too.
Sent from my Nexus 7 using xda app-developers app
I got my black One yesterday night, this morning after went shopping having my phone naked in my pocket alone, I found a tiny scratch in silver at the bottom speaker area, must be sand or dust did that.
The back is still fine, no chipping so far, but that's really easy to get scratched !!
Sent from my HTC One using xda app-developers app
The silver/white doesn't have any paint/anodization so it won't chip. However, the black is painted/anodized so it can chip/flake.
The "silver" one is anodized, it creates a harder surface than bare aluminium.
sorehm said:
Damn I chipped my HTC one today and its black, Now i can see a silver chip at the top left corner, anything can be done to cover the chip?
Click to expand...
Click to collapse
I can't post links yet cause I'm too new but here's a good solution :
If your black iPhone 5 has developed scuffs, replacing your phone is not the only option. There are products available which will turn chips or scratches from silver to black. The following information applies to the black iPhone, as we’ve not yet found a way to make scuffs on the silver aluminum surface of the white iPhone 5 less noticeable.
We do not recommend using a black Sharpie marker or ordinary black paint, as these will do a poor job of matching the anodized metal. Applying marker or paint could make the phone look worse and hurt its resale or trade-in value in the future.
If you choose to repair the phone on your own, we recommend a product which is designed for repairing imperfections in anodized metal. These products will not work with the white iPhone 5 as they are not intended to repair silver surfaces. However, if you have a black iPhone 5, anodized touch-up products will give you the best match to the original surface and provide the best protection.
Our best recommendation is to use the Birchwood Casey Super Black touch up pen, shown at the top. It’s very easy to apply, mess-free, and is quick to dry. These pens have plenty of paint to repair several phones, or you can use the leftovers to touch up nicks or scratches in cameras, binoculars, or black sporting accessories. Except for the thin, chamfered (a.k.a. beveled) edge, all aluminum surfaces on the iPhone 5 are flat black. We recommend the flat black pen for fixing scuffs and nicks on the larger, flat surfaces. If you wish to touch up the narrow, shiny, chamfered edge should you go with the gloss pen.
Simply dab the pen over each scratch or nick. If you put down a bit too much paint, use a damp paper towel to dab up the paint and try again. Once you’ve covered any scuffs, wait about one hour before handling the areas where paint was applied.
Here, i only have a htc phone as my camera...i'll try and up some more
sorehm said:
Here, i only have a htc phone as my camera...i'll try and up some more
Click to expand...
Click to collapse
How did that happed? It looks a quite big dent rather than chipping. But I may be wrong. Please keep up updated.
Sent from my HTC One using xda app-developers app
I would like to start a topic dedicated to black HTC One, since there is still not many people got the black One, and hope this topic could help others see how durable/not durable the casing is, especially over time.
We all know that both silver and black One have the same aluminum casing, anodized, difference is the colour. So silver version naturally hides the scratches but black version will show clearly the scratches.
Hope all the black One owner would come and share the condition of their phone, if it is still no scratch at all, or already developed some annoying marks.
I will start from me, I had the black One for 1.5 days, still naked no case, there is one small scratch at the bottom speaker area, very thin line so must be due to sand; top edge near headphone jack has little scratch or chip, not sure what it is, but silver colour so noticeable; the top plastic strap at the back above camera had developed a crack since got the phone.
All of them are very small so not able to show on picture, will definitely post picture if things get worse.
I will try to report back often, but hope this post won't grow too big so it would mean actually the black One is holding up pretty well.
Sent from my HTC One using xda app-developers app
+++++++++++++++++++++++++++++++++++++++++
[Update: 24/04/2013, 5 days after I had the phone, I always baby the phone.]
I got two tiny scratches, picture included, see post 12.
Sadly, EXACTLY why I didnt get black. I saw MANY videos on Youtube and alot of them had scratches around that shiny bezel and along the edges. They weren't even highlighting the scratches, I just noticed them. Man, it looks beautiful, but unfortunately shows many of the scratches that the silver doesn't. I remember the iPhone 5 went through the same thing.
Really sucks that people cant show off the beautiful phone without a case. I have a thin leather case on mine, and REALLY wish I could go "naked" but know better. (been there, done that!). At least I love the looks on the leather.
Oh, that's really sad and worrying, I have seen colleague's black iPhone 5 which only had two tiny marks at the edge, so I thought One would be similar. I accept the danger of having the black, but really want to see in a normal careful usage, will it be scratched badly still?
Tomorrow Monday is a good day, I can put my phone in the bad world to see how it survives or not... Until tomorrow!
Sent from my HTC One using xda app-developers app
Just a caveat to my prev. post. ALL aluminum (encased) phones, ESPECIALLY if they are anodized to a color, will have the same issues.
woodekx said:
Just a caveat to my prev. post. ALL aluminum (encased) phones, ESPECIALLY if they are anodized to a color, will have the same issues.
Click to expand...
Click to collapse
Yes I totally agree with you, however I want to see how the black One stands daily usage and if it gets scratches very easily.
I have the black One, at least in the next few days I will report back.
Just hope this could help other people make sensible decision on what colour to choose.
Sent from my HTC One using xda app-developers app
h.han said:
Yes I totally agree with you, however I want to see how the black One stands daily usage and if it gets scratches very easily.
I have the black One, at least in the next few days I will report back.
Just hope this could help other people make sensible decision on what colour to choose.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I really don't think the real problem is as much the anodizing, is as it is with the routed beveled edges. As beautiful as they are, those sharp edges seem to be very venerable to chips/ dings. Iphone 5s had the same issues. Hey, I love em! The really give the phone a "rich" look.
I can't even get a black one. That's what I'm waiting on. Only available in silver here.
Sent from my EVO using xda app-developers app
I think the shiny part on the edges aren't anodized and is just plain paint. I haven't seen any anodized metal that's shiny my whole life lol! It should be matte texture so that maybe the reason why it's chipping. Unlike the silver though the edges are exposed plain aluminum it doesn't have any paint nor anodized layer so it won't chip.
I also wanted the black HTC One and said to myself I'll just apply a transparent nail polish on the edges but I got fed up waiting so got the silver instead and waiting for it to arrive till now.
Good luck guys! For me given the chance right now if I could choose I would still select the black over the silver.
All I could suggest is...
1. You could coat the edges with transparent films to avoid the scratches or
2. You could scrape the black color on the edges and give it a shiny silver bezel instead like the silver one. That would make it look more premium if you ask me...
Imagine it... Pure black matte body with shiny silver edges
Riyal said:
I think the shiny part on the edges aren't anodized and is just plain paint. I haven't seen any anodized metal that's shiny my whole life lol! It should be matte texture so that maybe the reason why it's chipping. Unlike the silver though the edges are exposed plain aluminum it doesn't have any paint nor anodized layer so it won't chip.
I also wanted the black HTC One and said to myself I'll just apply a transparent nail polish on the edges but I got fed up waiting so got the silver instead and waiting for it to arrive till now.
Good luck guys! For me given the chance right now if I could choose I would still select the black over the silver.
All I could suggest is...
1. You could coat the edges with transparent films to avoid the scratches or
2. You could scrape the black color on the edges and give it a shiny silver bezel instead like the silver one. That would make it look more premium if you ask me...
Imagine it... Pure black matte body with shiny silver edges
Click to expand...
Click to collapse
I am not so sure about black phone with shiny silver bezel but won't mind see one in real life (not mine though)
Just update on the condition of my black One, it's been more than 3 days since I got it, naked all the time, no new scratches or chip apart from two which appeared on day 1.
Yes I did baby my phone, not like avoid using it, just not putting other stuff in the same pocket, trying not to drop it, not touching the metal button near my pocket when putting phone in, laying it on a clean surface, etc. All commonsense.
But yes, the shiny bezel may give up first another reason being the edge of the bezel is so sharp, touching it over time may just remove the colour of the coating and show a silver line. But so far it's holding up well.
Comparing to the back, the up and bottom speaker pieces seem more easily scratched, the surface of them seem more rough than the back aluminum which means sand or other hard material will cause more obvious damage to them.
Hope other people who had the black One longer than I did can share what the condition of their phones are at.
Sent from my HTC One using xda app-developers app
Mmmm but where are the pics??
vegetaleb said:
Mmmm but where are the pics??
Click to expand...
Click to collapse
I only have two very tiny scratches they are too small to be captured on camera, apart from those two, my phone is in new condition.
Hence no picture sorry.
I would like this thread to gather conditions of as many black One as possible to give a real life example of what to expect if anyone wants to get a black One. Or if you don't have the black One, anticipation of what could get scratched/chipped easily is also welcome.
Sent from my HTC One using xda app-developers app
Ok, on the way home on the train, just saw a light mark dot on the edge of top frame above the front camera. Did not do anything special to my phone, was browsing web...
Will update a picture later when a reach a camera.
It's very small but big enough to be noticed.
[UPDATE] picture uploaded
Sent from my HTC One using xda app-developers app
Hi again guys! I am gathering info with regards to the chipping info of these phones... I just wanna ask... Where does the scratches/chipping happen?
Is it on the unibody aluminum part of the phone or within the speaker grills? I'm not sure yet but I'm thinking maybe the speaker grills aren't anodized.
Riyal said:
Hi again guys! I am gathering info with regards to the chipping info of these phones... I just wanna ask... Where does the scratches/chipping happen?
Is it on the unibody aluminum part of the phone or within the speaker grills? I'm not sure yet but I'm thinking maybe the speaker grills aren't anodized.
Click to expand...
Click to collapse
I am not sure my ones are chippings or just simple scratches, more likely scratches. In my mind, chippings are marks that appeared without phone being hit by a harder object.
I would imagine the speaker parts are easier to get scrached than the back, but I tried using my keys to scratch them (mid force), it only left some trace which were wiped away, so it seems they are quite tough as well.
The only noticable scratches are on the top shiny edge above the front camera, no idea why it happened. They are very small but if you look carefully, they are there.
im thinking to get a black one, then pair it with a dual layer case like the incipio dualpro.
silicone inside, pvc hardcase layer outside
shiningarmor said:
im thinking to get a black one, then pair it with a dual layer case like the incipio dualpro.
silicone inside, pvc hardcase layer outside
Click to expand...
Click to collapse
Yes, I actually ordered a disztronic black case shipping from US (I am in UK), although I really prefer keeping the phone naked.
But yes, all aluminum phones will get scratched just a matter of time, so having a case is necessary to standby.
So far I am quite happy about the condition of my black One, although I only had it for 5 days, but at least it seems it won't chip automatically like the HTC One S (black) did. Of course, they have different material.
I just noticed a few scratches that I'll have to live with.. Maybe I'll have to buy a case now (thought going naked would have been fine)
I know there are plenty of topic on this, but most cover actual defects.
Btw, just wanted to say that I LOVE this device. No way I'm returning. Not even this unit! Can't! Spent soo much time customizing it, and even the benchmarks are slightly above average
Anyway... My problem right now is the chamfered edges and the bottom speaker grill.
The silver One is susceptible to the same amount of scratches as the Black One, albeit they won't be as prominent on the silver variant.
The unit I'm talking about is actually a replacement. The first One I owned had defects, but even for the short time I had it, it somehow managed to build a few dents and scuffs on the chamfered edge up at the top speaker grill.
This time, the problem's on the bottom! I have a few scuffs on the bottom chamfered edge... It's been 4 days in my possession, and already is growing hits and dings. Now here's the interesting part.. As a university student, school's out and the phone has pretty much left the house only once! Other days it laid either in my hand, on my pocket, or on the floor right by my bed.
I looked at it and thought that maybe I can polish them when they get worse.. But things took a turn for the worse right away!! As I was examining the scuffs on the edge, I came across a hairline scratch that extended from the bottom of the lower speaker grill to the top (of the speaker grill) -- almost like a crack -- a hairline crack. Looks as if a pencil lightly went over it.
I've attached photos for your viewing pleasure, but as minor as they appear, note that it's only been about 4 days!! I'm wondering what'll come out of it over an extended period of use.. Guess I can live with whatever has happened to date though =]
*please note that the images aren't too good a representation of the actual damage to the device. It's slightly worse in person -- the abundance of light blurs the scratches a bit.
Arghhh the photos have since showed less of the damage as I had to resize the images to 640* 425 (instead of 4288 * 2848 )
To me, it's just like a dead pixel. You can't tell it's there in normal use, but once you find it, it'll haunt you for a while. At one point you won't care.. But when you see it again, you'll start kicking yourself.
I've been babying my phone, but I think it's time for me to go up onto Amazon and buy myself a good case. *flies to look at the Accessories forum*
Any of you folks keeping your phone naked experience any unexplained scuffs and nicks on your edges? Scratches on your speaker grill?
You guys think that we'd be able to -- at some point -- replace the speaker grills with OEM parts? I'm sure people will come across much worse problems...
No matter what device, what manufacture or what materials the device is made out of, if you don't use a case, this will happen and worst. Your scratches are barely visible. I had to zoom in the picture to see them.
I don't have the device yet but I already have 3 cases for it and a pack of screen protectors. The official flip case and 2 tpu s line cases, one black and one clear.
Sent from my HTC myTouch 4g using xda premium
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Did you check the phone over when you got it? Just asking as I've seen a one or two with some nicks and scratches out of the box I'm guessing it happened when polishing the chamfered edge.
Man, how do you use your phone to manage to put these scratches and dents.
I have had the phone since last Friday with daily use and no scratches, I just put a skinomi clear film in the back to protect against scratches and dents, the front is naked, looks beautiful, you don't even notice the film is there
Sent from my HTC One using Tapatalk 2
I have films on the back and front of the device myself!
I honestly do not know where these came from. It's been on my desk or on the floor by my bed. Hasn't left the house -- maybe just once..
Anyway I attached another saddening photo. This was taken with my old Atrix.
I'm thinking that this may have been a result of missing the charging port and accidentally sliding the micro usb plug into the front of the phone while I was half asleep...
Anyway, I'm sitting here and there's much greater things to worry about. It could have been much worse... A random scratch on the screen or a deeper nick...
Besides, the bottom speaker grill is a separate piece and if it continues to get scratched up and continues to bother me, I'll just see if i can get it replaced..
Hope I actually move on. This is the same feeling as when I found a dent on my $700 guitar.. I got over that. So ill probably get high over this
Aha I'm wondering what it'll feel like when I find a small scratch on my first new car -_-... Boy will I be a mess!
Sent from my HTC One using xda premium
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
muayyadf1 said:
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
Click to expand...
Click to collapse
Yep. But I'm hoping that maybe next year they make the switch to a harder metal like steel... The OPPO Find 5 allegedly has a steel frame construction. Sure it's heavy, but if they get the right look, whatever! Durability should be of more importance than weight..
Now if it does weigh too much, maybe implement the steel construction only around certain areas...
I'm aware this will pull up costs, but the device would be that much better!
Dharkan said:
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Click to expand...
Click to collapse
There's another thread about scuffs on the black edition. Maybe I've got too far... You can't see this if you're not looking for them, but to me they'll always be there.
I've seen multiple accounts of folks on here see through their black paint into the aluminum underneath.. You'd want to avoid that.. So I don't regret having the silver edition.
They both scratch the same amount, but the black shows more..
Good luck and I hope you enjoy your One just as much as I am!
Choose the device that also to you more! If you like the stealthy black, but that! But if you do, go for the Poetic Atmosphere case.. Looks pretty nice on the black variant.. The silver one.. Not so much.
Still going to look for a case, but it isn't my priority.. I'd rather keep the phone naked and enjoy the cool feel everyone I touch it in the morning!
Dharkan said:
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
Click to expand...
Click to collapse
I've wipes this, took a moist set of wipes below the actual holes, but nothing. There is a scratch, not a surface scratch, it's slightly deeper.
100% sure this ain't going away.. But i haven't lost all hope! As this phone e grows in popularity, some ebay sellers will manage to get their hands on some grills and they should be replaced rather easily since they're in there only via an adhesive. Would have been more ticked off if it was on the screen, on the chamfered edge off of the back, or even on the back itself..
Here's hoping the grills are replaceable and I can do something about it in maybe 6 months!
Sent from my HTC One using xda premium
I had mine with no case for almost 1 week and not a single scratch
Sent from my HTC One using xda app-developers app
No idea what to say. I'm keeping it naked. Maybe this was from the factory.. I don't see how you can get a scratch from the bottom to the top of a grill without taking your phone out much...
Maybe I didn't notice this before, but i still am worried about the durability of the device. If pocketnow reports bad durability, then I've got no option but to go with a case. Right now i dont even know where these came from.. No sand in my room, no hard metals that would easily scratch anodized aluminum..
It really IS a mystery...
Sent from my HTC One using xda premium
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
WolfDale7 said:
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
it's not the aluminum i'm worried about
hamdir said:
it's not the aluminum i'm worried about
Click to expand...
Click to collapse
Oh Crap. Overlooked that!
Wow..
Kay so time to look for a similar case to the one you've got
I want to keep the beauty of the HTC One visible while still protecting it from further scratches...
Everything over on the accessories forum doesn't really cut it go me :/...
I'll go to this mall that pretty much just sells phone cases and phones. Hopefully I find a store that has what I want for a reasonable price
Sent from my HTC One using xda premium
WolfDale7 said:
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Click to expand...
Click to collapse
Probably the thinnest, plastic case around. does not add bulk like otter cases do. you should check it out...
http://www.bestbuy.com/site/Platinu...&st=platinum series case htc one m7&cp=1&lp=1
Also, it's aluminum. Whoever thinks aluminum, a softer metal, won't scratch, is lying to themselves.
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
nullkill said:
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
Click to expand...
Click to collapse
how will a rubbery cover scratch it? you mean if it falls?
hamdir said:
how will a rubbery cover scratch it? you mean if it falls?
Click to expand...
Click to collapse
No TPU is not rubbery its more like flexible hard plastic. If the case fits well the TPU material will scratch the phone from taking it off putting it back too much. If anything get in between the phone and the case game over it's almost worse than naked. It's sold as rubber like or soft but I have 20 different TPU cases and all are the same crap. Otterbox and the others I mentioned use silicone which is like a soft rubber. TPU is a cheap is injected crappy material that is why you will find cases as low as $5 or lower.