I have downloaded the energy rom for the HD2 ive don everything i was meant 2 like the radio and the hspl but im stuck on the loading screen with the nrgz logo and i cant get it workin i only installed this rom cos i was gonna put froyo on it 2 run android but now i cant can some1 plz help me and yes i am a noob
hard reset, boot into hspl, run task29, reflash
while your at it, since your having issues flashing a WM rom, take the time to format your sdcard, i predict you'll be having issues flashing android...
Related
Had before the ENERGYROMS, but my HD2 (leo) was hanging over- and over, so I've read about TASK29.
Well I just downloaded it, extracted somewhere and followed all instructions, but now after using TASK29 I only get the splashscreen.
Is there any way to solve this?
Before I had Energy.Leo.23569.Sense2.5.MaxSense.UI.Jun.02, HSPL2 and Leo_Radio_15.40.50.07U_2.11.50.20.
I'm a bit desperate now, anyone who knows what the **** I bricked now?
Cheers
when you flashed energy you probably forgot to flash a compatible radio.
go into boot loader, flash any radio mentioned in the energy posts (you did read EVERY word in thee first few posts, right? cos only noobs skip straight to the download without reading first....)
once the radio is flashed go back into boot loader and flash energy.
Maybe it's not bricked yet - remove the battery, let it cool down for some 15 minutes, than try again?
samsamuel said:
when you flashed energy you probably forgot to flash a compatible radio.
Click to expand...
Click to collapse
Jo mate, no as I said; I had an Energyrom AND the correct radio (newest), but I had problems with hanging homescreens etc, so it was so annoying that I was looking for a good way to solve it. So someone said here that I had to download TASK29 and CLEAN the whole HD2 and after that install the ENERGYROM again so it would be all refreshing as new. But now it doesn't work, after using TASK29, at all! I'm ****ed
You have reflashed the Radio and the Rom you want after the task29 havent you? if you have, try flashing a HTC Stock rom. If that works then flash back to the Rom u want.
But it's almost certainly because you dont have the correct Radio Rom on.
yea, what the_ape said.
when you task 29 it wipes the phone so it won't boot.
enter bootloader and flash your rom.
basically repeating what Sam said but looks like you don't have a ROM on your phone at all now, just flash the ROM you want again and all will be good
Thanks people, gonna try it within an hour, I will let you guys know if it's gonna work
hi guys i have a very strange problem
after a week that i tried wp7 i decided to go back to wm + andro sd....
i already did other times and everything was going well...
i did task29 to install my usual energy rom...copied back my usual android rom backup...but...
Android dosnt load...its stuck at "htc page" for hours...i tryed different rom...tried the same build of my backup and nothing happens...
now i went back to wp7 and set for dual boot from maglar...always stucked at htc screen...
i really need andro for google maps until wp7 have his version...im going crazy!
anyone ever had the same problem?
i tryed different wm builds before try wp7 dual boot but always the same problem
with a fresh installation of android after 2 hours of wait (i was sleeping hehe) data.img isnt created...tried to put a fresh one from the stock rom but nothing
hoping my english is understandable i say "THANKS" to all for every suggestion
This isnt the questions forum this is the development forum.
uooops! i posted in the wrong tab hehe i have about 15 xda tab open at the same time...can i move this or only admins can?
Try This
xardus said:
hi guys i have a very strange problem
after a week that i tried wp7 i decided to go back to wm + andro sd....
i already did other times and everything was going well...
i did task29 to install my usual energy rom...copied back my usual android rom backup...but...
Android dosnt load...its stuck at "htc page" for hours...i tryed different rom...tried the same build of my backup and nothing happens...
now i went back to wp7 and set for dual boot from maglar...always stucked at htc screen...
i really need andro for google maps until wp7 have his version...im going crazy!
anyone ever had the same problem?
i tryed different wm builds before try wp7 dual boot but always the same problem
with a fresh installation of android after 2 hours of wait (i was sleeping hehe) data.img isnt created...tried to put a fresh one from the stock rom but nothing
hoping my english is understandable i say "THANKS" to all for every suggestion
Click to expand...
Click to collapse
I had the same issue. Try loading an official WM6.5 rom. Dont task29. Then load magldr, then CWM them flash build of choice. you should be fine.
Let me know if it works for you please.
nattyd said:
I had the same issue. Try loading an official WM6.5 rom. Dont task29. Then load magldr, then CWM them flash build of choice. you should be fine.
Let me know if it works for you please.
Click to expand...
Click to collapse
i will try this evening at pc...but im not very practice with short words...cwm stands for?
i have to task29 to go back from wp7 cos with new roms the update tool dsnt connect
CWM = ClockWorkMod
Instructions
xardus said:
i will try this evening at pc...but im not very practice with short words...cwm stands for?
i have to task29 to go back from wp7 cos with new roms the update tool dsnt connect
Click to expand...
Click to collapse
Hope this is helpful.
As Nick.C has pointed out CWM = ClockWorkMod Recovery. Im assuming this is the method you are using to flash your builds.
I did not mean for u not to use task29 at all. Follow the steps below and all should be well.
1. Task29 to remove Windows Phone 7
2. Flash official WM6.5 Build (DO NOT Task29)
3. Download and use SD Formatter 3.0 to format SD Card. Set option to Full Erase and Size adjustment to ON.
4. Install MGLDR 1.13
5. Flash CWM
6. Flash your favorite android build.
just to be sure...after flash official rom...i think i need to hspl before flash maglrd
i know i should read mag installation guide...but...im stuck in highway and im too lazy to find it hehehe
xardus said:
just to be sure...after flash official rom...i think i need to hspl before flash maglrd
i know i should read mag installation guide...but...im stuck in highway and im too lazy to find it hehehe
Click to expand...
Click to collapse
If you have flashed custom roms before, then you already have HSPL installed, because u cant flash custom roms without it. HSPL is always there until you remove it, even if you flash an official or custom rom.
To flash MGLDR - Boot into the boot loader screen (Multi Color Screen) and then flash MGLDR
To flash CWM - Boot into MGLDR and select usb flasher then flash CWM. Some chefs have there own custom CWM so read there instruction so u will know if you will use the original CWM or their version.
sd card block size?
Thread moved to Q&A.
hi guys i hvae flashed wp7 rom on hd2 tmo i have done every thing that is needed to run the wp7 but when ever i boot it stucks on htc logo boot screen please help
does any one has answer for it help guys i m waiting
Did you really follow everything step by step?
With the problem you describe, people usually forgot to flash the correct HSPL or Radio ROM.
It must be 2.08.HSPL and Radio ROM 2.15.50.xx, before installing MAGLDR 1.13.
Sometimes, incompatible SD cards make trouble, too.
tictac0566 said:
Did you really follow everything step by step?
With the problem you describe, people usually forgot to flash the correct HSPL or Radio ROM.
It must be 2.08.HSPL and Radio ROM 2.15.50.xx, before installing MAGLDR 1.13.
Sometimes, incompatible SD cards make trouble, too.
Click to expand...
Click to collapse
i tried but its still the same i tried flashing it with three diff memory card but it still stuck on htc boot screen
TMOUS?
If you've got the "other" (US 1024) HD2 you might have properly screwed your phone up
If you've got the European (512) non-TMOUS version then you've done something wrong on one of the steps. No more than pointers here though. You will have to search for yourself in the Development Pages.
1.HSPL
2.Correct Radio
3.MagLdr
4.ROM
In any case this Forum will help solve your issues.
stepthehen said:
If you've got the "other" (US 1024) HD2 you might have properly screwed your phone up
If you've got the European (512) non-TMOUS version then you've done something wrong on one of the steps. No more than pointers here though. You will have to search for yourself in the Development Pages.
1.HSPL
2.Correct Radio
3.MagLdr
4.ROM
In any case this Forum will help solve your issues.
Click to expand...
Click to collapse
i did every thing i m using tmo usa i did t9,hspl,correct radio,magldr,and try to install 3 roms all the roms stucking at boot screen i also tried to change the sd cards but still the same results i m try to solve it from past 3 days guys help me
Stickies
Read the stickies in development forum. I think you need seperate ROMs for TMOUS. Maybe also different HSPL, and MagLdr. I don't know what you flashed or what you should have flashed, so you need to read everything the people in the know have written.
Stuck on HTC screen as well!
I have tried it all!
Task 29, reinstall HSPL, reinstalled stock Winmo 6.5, reinstall MAGDLR 1.13, Radio 2.15, etc...
Stock 6.5 rom boots run fine.
Win 7 ROM install fine but then hangs on HTC screen forever! Been looking at it for 30 mins now!
This is highly annoying as everything was working fine last week!
Weirrrrrdddd.
Anybody got tips on this?
Peace.
This is on a EU HD2.
aesarius said:
I have tried it all!
Task 29, reinstall HSPL, reinstalled stock Winmo 6.5, reinstall MAGDLR 1.13, Radio 2.15, etc...
Stock 6.5 rom boots run fine.
Win 7 ROM install fine but then hangs on HTC screen forever! Been looking at it for 30 mins now!
This is highly annoying as everything was working fine last week!
Weirrrrrdddd.
Anybody got tips on this?
Peace.
This is on a EU HD2.
Click to expand...
Click to collapse
What version of HSPL did you install?
And about WP7, did you installed from the bootloader or MAGDLR USB Flash?
Hey @xsi!
Got 2.08.HSPL
Flashed WP7 through MAGDLR. Everything is going smooth, partitions ok but reboot stuck on HTC logo for ever!
Tried to reinstall Android through Clk no problems, Android boots fine and all, flashed WP7 through MAGDLR after but same thing happens!
Maybe a problem with Clk NAND partitions?
Cheers!
aesarius said:
Hey @xsi!
Got 2.08.HSPL
Flashed WP7 through MAGDLR. Everything is going smooth, partitions ok but reboot stuck on HTC logo for ever!
Tried to reinstall Android through Clk no problems, Android boots fine and all, flashed WP7 through MAGDLR after but same thing happens!
Maybe a problem with Clk NAND partitions?
Cheers!
Click to expand...
Click to collapse
No my friend i will go with sd card problem ... i had same problem it will stock at htc logo ... tried couple sd card 7 of them and i works with 1 gig sd card memory
Hi guys... i am in the process of installing hardspl on my phone...do i need to flash a new radio aswell????...i currently have
Rom version 3.14.206.1
Radio version 2.15.50.14
spl-3.03.0000
also when i install hard spl do i need to uninstall the current spl or does it get overwritten?????
no. run hspl4, choose 2,08,hspl, all ready for droid. (unless u are wanting to run sd card android, in which case you dont need hspl, only for changing the winmo rom, radio is still fine)
Hi...yes i am wanting to run android from sd card...you said in that case i wont need hard spl??...I am still unable to boot android from sd card... i thought i HAD to have hard spl??
i installed a rom called mccm hd v6..after selecting clrad and hacket i get a white splash screen with green htc logo...nothings happening after that...i also have the latest windows rom aswell...my spl is 3.003...please help guys!!!
no, only for nand android. sd android is running on top of winmo, so doesnt care about the spl.
However, ive never run sd android, im just telling you what i 'think' to be true, it wont hurt to try 2.08.hspl, BUT, since you have a regular hd2, (3.14.206.1 is o2, i think?) then setting 2.08.hspl will cause the 3.14 winmo rom to stop working properly, become unstable and report only 50 or so meg free ram, , , so if you DO want to try setting hspl, you will need to change winmo roms too. (Another reason i believe you can run sd android without 2.08.hspl is because i know people run it alongside 3.14 roms which require 3.03 spl's )
If i were you, id consider looking into the problem android is throwing, , some take aaaaaaaages first boot, for instance, when they build teh data file, and i do mean aaaaages, tens of minutes for some roms,
ok...so how come i am unable to boot to the new android rom?...i did manage to install gingerbread by tytung a couple of weeks ago...was having problems with that...after i uninstalled it i can no longer re-install it!!!!...i have done 2 fresh installs but its not booting it up anymore...strange...
dunno, sorry, i never got sd android to boot either, tried on maybe a dozen different occasions, a few hours each time,, and only got it to work once, and it caused me to hard reset next time i booted, cos winmo wouldnt boot, so i left it alone till nand came along. (And at that time i would have been running 2.08.hspl too,,, so it wasnt that)
perhaps you have a leftover data folder or summin, from the old instal on your sd card? i know on nand builds if you dont clear out the data from the old one it can cause failed boots.
i have formatted the sd card a good few times!...dont know what it could be then....
I have read almost all the threads on here regarding going back to winmo but I hav issues as the HD2 gets stuck on the white HTC screen after installing.
I decided to go back because my phone kept freezing on the black screen where it says gogogo and I gave up and decided to load winmo.
I had hspl2.08 and donwload the 1.66 htc firmware and installed and it got stuck. I tried various things and then also tried installing 3.03hspl and the 3.14 firmware but still the same.
Any ideas?
it is a leo HD2 originally bought locked to t-mobile?
Maybe nand of phone just broke? Did you tried task29 before flashing stock? Other sdcard?
If won't help, I would try to flash stock 1.66 (restore OSPL) and send it to service pretend n00b customer which not understand what happened
I have tried task 29, I have done everything to be honest but i have a feeling I am doing something.
So fine I can't figure out how to isntall winmo back on it.
I tried to install magdllr113 and adrecovery but it fails to load recovery.