Database Users

[Q] Pretty sure I didnt brick my phone, but not sure what to do

Sooooo, I may have bricked it. Any help would be appreciated.
So I got my new sd card and figured i would go ahead and partition for future use, if needed for apps2sd, or any other reason. Instead of going through adb I thought I would save myself some time and just do it from Rom Manager.
Now most of you probably already know what happened. Being as the storage on our devices is called "sdcard" I am humbly assuming that it thought I wanted to partition THAT.
Phone wont boot. Tried factory reset, but no surprise there, it did not work. Can get into download mode and reset menu.
Do I need to flash the factory pda, phone and boot files? Will that work? Where can I get it (preferably without the bloatware and root?????)? Do I need a specific version of odin or will the same one i used for my behold 2 be ok?
Sorry if any of this is stupid, I read these forums cause I want to learn as much as possible about my phone, but have limited experience messing with it. Might try Eugene's froyo just for kicks before I go back to factory. But is this the correct route, or should i just get a replacement?
**** update to issue in post 5

Here look at this: http://forum.xda-developers.com/showthread.php?t=743875

ElahC said:
Here look at this: http://forum.xda-developers.com/showthread.php?t=743875
Click to expand...
Click to collapse
Thanks, makes sense. Download mode does not appear to be working now though, think i got into on accident trying to get to recovery mode.
Is it vol down plus power?

How do you know if you are in download mode? Once when i was in what i thought was download mode it said please wait downloading or something, big yellow characters, and when i hit menu in recovery mode it sent me to a screen with a little mailbox and an arrow coming out of it pointing to a little green android.
Which is dl mode?

ok, i got it into dl mode and when i flashed back to stock it still had a blank screen, like the post above says. But then when I tried to flash Eugene's froyo rom it froze on cach.rfs in odin and the screen on the phone went black. So after about an hour i pulled the plug and tried again, same thing, now when i go to flash back to stock, like previously, it does the same thing, freezing when odin gets to cache.rfs
Also the cell phone goes to a screen that has a cell phone and a computer and the link is broken by an exclamation point. cannot get into recovery mode from there but can get back to download mode.
Any help with all of this?

People have been saying that it could be a problem with your Operating System. Mines is Windows 7 64 - bit and when I use Odin it worked but I have experienced what you have; Odin getting stuck on cache.rfs. You can try on a Windows XP based computer to see if you have any success in that. Also you can possibly be using the wrong Odin. Try the Odin from either : http://forum.xda-developers.com/showthread.php?t=734475 , or : http://forum.xda-developers.com/showthread.php?t=740558 . When I was using Odin it would get stuck on cache.rfs but I tried a different Odin and it worked fine again. Really hope this helps and sorry for the late response.

cache.fs problem in odin
ElahC said:
People have been saying that it could be a problem with your Operating System. Mines is Windows 7 64 - bit and when I use Odin it worked but I have experienced what you have; Odin getting stuck on cache.rfs. You can try on a Windows XP based computer to see if you have any success in that. Also you can possibly be using the wrong Odin. Try the Odin from either : http://forum.xda-developers.com/showthread.php?t=734475 , or : http://forum.xda-developers.com/showthread.php?t=740558 . When I was using Odin it would get stuck on cache.rfs but I tried a different Odin and it worked fine again. Really hope this helps and sorry for the late response.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121

Well crap...I think I bricked it :-(

I tried to unroot my phone via OCLF from the market. It went dark, then got the normal Vibrant screen, the the Galaxy S screen, then it went dark again. Now, it just sits. Black screen. All the buttons at the bottom are lit up. :-/
Anyone?

Silly question, I know. But did you have a nandroid backup, by any chance?

This is probably a last resort, but try boot into recovery and wipe everything. This fix the problem for me, the downside is you lose all you data.
Sent from my SGH-T959 using XDA App

If you are anything like me, recovery didn't work and using Odin and reflashing Stock with repartition didn't work either.
You'll need to use odin to flash Eugenes "Vibrant that doesn't brick" (NO REPARTITION), then use odin again to flash Stock (check repartition this time) and you'll be good to go.

You can try to flash the froyo rom with odin...... I had that same exact problem and this is what fixed it for me. Once froyo us flashed then you can flash whatever rom you want. Hth

Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!

hospo said:
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
Click to expand...
Click to collapse
Well, good news is... you didn't brick your phone, this is recoverable. Best idea would be to search the forums on how to ODIN back to Stock. Theres plenty of posts on how to do it. You should also be able to find this in the tips & tricks threads. Good Luck.

Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)

Kienz said:
Silly question, I know. But did you have a nandroid backup, by any chance?
Click to expand...
Click to collapse
Is it even possible to make a nandroid backup before rooting?

hospo said:
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Click to expand...
Click to collapse
Hey - what does you doing? Please told me, I've the same problem:
If I start the phone with an USB cable and the battery symbol with the running point under this, the PC recognize that something is connected, but Windows found no driver....
How could you could flash the Stackfirmware back, if the recovery and download menu does not work ?
PLS help !!!

Check out this thread http://forum.xda-developers.com/newreply.php?do=newreply&p=8129898
Go to the section where it says "Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out."
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works

And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
Click to expand...
Click to collapse
If I following the link and the next one, I can read:
Caution!!! You Must be on STOCK Vibrant Rom & NEVER Have Already Flashed the JP3 Froyo Image
Click to expand...
Click to collapse
It isn't -> it's a Firmware for the normal Galaxy (3key)[I'm a idiot]
First,
You must already Have Odin installed & Know how to boot into Down-loader Mode!!
Click to expand...
Click to collapse
Thats also the problem as described in front : I have had no chance to received the DL Mode.. maybe I make something wrong? The phone is booting up till the "S" is there, after that, the screen is black, keys are lightning...
The recovery 3button are blocked from the beginning; the DL Menu - I did not have reached it successfully
The PC recognize, that is something on USB, but not what ... so Odin did not see the Mobile, too.

Psa\\\\\ important - must read ! ! ! !

Okay,
There is a growing number of us XDA members on the Vibrant platform who have just bricked out phones. Save for other DEV tools, which I have not used, do not have access, and do not know how to use, for all intensive purposes, this phone is Br'iKTed ! ! !
Here are the series of events
1. flashed the latest Bionix
2. Worked great, some bugs, but for the most part without incident.
3. Flashed new DOW Kernel,
4. worked great for 2 days.
5. then on night 2, the phone was stuck on the DOW Green robot screen
6. could not get into Recovery mode (none of the recovery modes)
7. Phone would not boot
8. ODIN back to stock
9. After Vibrant screen, the phone turns off. No soft keys, Nada!
10. Flashed JI5, Ji6, Eugene's Non Bricking Froyo (ODIN Files)
11. Same result, Turned off after Vibrant
and
12. still cant' get into recovery
I am having problems with the phone starting up and loading what I flashed.
I flashed JI5 Ji6, and Eugene's non bricking Froyo Rom
These 3 are the only ones I was able to find that is ODIN flashable
Why you ask?
I cannot get into Recovery, but I can get into Download mode. I can't get into any recovery at all. NOTHING. This is why ODIN seems to be my only option.
But regardless of any ROM i flash, my phone shuts off right after the Vibrant screen. No splash screen, no loading, no booting. .Nothing. It just shuts off.
I can't charge it either.
i get a Charging bootloop. HOurglass - battery shows up for a bit, then restarts over and over.
So in other words. it's ****ed.
Hope that explains it sufficiently. if you have any more questions or suggestions, Im open man, Im open.
Help me
So I'm not sure how DEVs would like to proceed on this.
TW (I've always loved your roms. Been following you since the first BIONIX 1.8)
Morific (If it's the Kernel, i'd like to know about it)
Thanks for reading guys. I wanted to give everybody a heads up.
I don't know what the problem is, but I do know that the phone does not work.
I'd appreciate some suggestions or anything.
And to inform the community that this problem is out there. I hope there aren't any more bricked phones.
Cheers,

have you tried using odin with the repartition checked

Yes I have.
Tried it with/ Without. Using Just the Tar file, using just the base file. I've tried it all.
Thanks

a4 moda said:
Yes I have.
Tried it with/ Without. Using Just the Tar file, using just the base file. I've tried it all.
Thanks
Click to expand...
Click to collapse
have you tried to odin to ka6 or ka7? something with a bootloader

not to be that guy, but how does this pertain to development? This sounds to me like an individual case of something going wrong and not an overarching issue with current available software. Just in case I am wrong I am flashing Bionix, and the DOW kernel myself to see if I end up with the same issue. My suggestion is flash back to stock, and exchange your device for a new one from T-Mobile.

I totally understand what your going through. I'm having the exact same problem, the DOW kernel flashed ok but then it didn't want to come off and it totally has my phone stuck on that damn green robot screen.

I soft-bricked my phone once by pulling USB cable immediately after ODIN forced my phone to reboot after flashing. It was the first time I ever ODIN'ed my phone, and thought the reboot (ODIN calls it reset) was the final step of flashing, and unplugged the USB cable. Anyway the phone did not initiate final step of the installation of JFD image, and went into boot loop. You can't imagine how freaked I was. It wouldn't go into recovery mode even if I pressed volume up, down and power combo, because it didn't stop rebooting right after the Vibrant logo. I am not sure if bootloader was not installed correctly, though. But I kept the phone rebooting for a while to see what happens. No luck. Eventually, I followed someone's instruction, and pulled my battery out, plugged USB to my laptop and to my phone, started ODIN, and popped in the battery. The phone immediately restarted into download mode, and I was able to flash the phone again.
My experience may not help you as it appears that you are able to flash ODIN-flashables, at least. But I hope this helps someone who's experiencing similar issues. And I would try downloading a JFD image and verifying MD5 before flashing. It could be bad downloads of the image files.

Try to go to eugenes forum and he has a file to download...it is his unofficial jk2 froyo rom. Don't use the old "froyo that does not brick" Try to flash that in ODIN. I just used it tonight when I got stuck in stock recovery with a MBR Check sum failure. That should get u back to where u can fix ur phone. Also I don't click the repartition button in ODIN just causes problems for me. If u need anything feel free to P.M. me.
Sent from my SGH-T959 using Tapatalk

STiGLOGiC said:
not to be that guy, but how does this pertain to development? This sounds to me like an individual case of something going wrong and not an overarching issue with current available software. Just in case I am wrong I am flashing Bionix, and the DOW kernel myself to see if I end up with the same issue. My suggestion is flash back to stock, and exchange your device for a new one from T-Mobile.
Click to expand...
Click to collapse
Completely reasonable. This pertains to development because if there is an endemic problem with one of our ROMS or KERNELS (not pointing fingers, just pointing out the possibilities that I know of, there could be more), people in our community need to know. Hence, I titled it "PUBLIC SERVICE ANNOUNCEMENT"
Thanks. I hear you about Tmobile. I'd rather not have to dump my problem on Tmobile if I can fix it, because I flashed the rom. Despite the fact that Tmobile JFS leaves something to be desired, they did deliver me a working phone. So i'd like to exhaust all possibilities before calling it quits.
hackman17 said:
I totally understand what your going through. I'm having the exact same problem, the DOW kernel flashed ok but then it didn't want to come off and it totally has my phone stuck on that damn green robot screen.
Click to expand...
Click to collapse
Exactly.
jaetm83 said:
I soft-bricked my phone once by pulling USB cable immediately after ODIN forced my phone to reboot after flashing. It was the first time I ever ODIN'ed my phone, and thought the reboot (ODIN calls it reset) was the final step of flashing, and unplugged the USB cable. Anyway the phone did not initiate final step of the installation of JFD image, and went into boot loop. You can't imagine how freaked I was. It wouldn't go into recovery mode even if I pressed volume up, down and power combo, because it didn't stop rebooting right after the Vibrant logo. I am not sure if bootloader was not installed correctly, though. But I kept the phone rebooting for a while to see what happens. No luck. Eventually, I followed someone's instruction, and pulled my battery out, plugged USB to my laptop and to my phone, started ODIN, and popped in the battery. The phone immediately restarted into download mode, and I was able to flash the phone again.
My experience may not help you as it appears that you are able to flash ODIN-flashables, at least. But I hope this helps someone who's experiencing similar issues. And I would try downloading a JFD image and verifying MD5 before flashing. It could be bad downloads of the image files.
Click to expand...
Click to collapse
Thanks for the heads up. I've gone through this myself many times. And i'm sure your post will help others out there. My problem (as well as many others on here with the same ROM and KERNEL I used) seems to be different and unique. Something that ODIN won't cure.
vibrant2010 said:
Try to go to eugenes forum and he has a file to download...it is his unofficial jk2 froyo rom. Don't use the old "froyo that does not brick" Try to flash that in ODIN. I just used it tonight when I got stuck in stock recovery with a MBR Check sum failure. That should get u back to where u can fix ur phone. Also I don't click the repartition button in ODIN just causes problems for me. If u need anything feel free to P.M. me.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Yes, tried that too. Same result. Vibrant.. then shut off.
Thanks anyway.

I had actually just had Bionix-v 1.2.1 and the new DoW combo to try out Voodoo Sound. I really loved the sound quality, but battery drain was not adequate as being my daily driver, even though I set it to run at 1ghz and used a sleep profile. After just over 2 days of use, I backed out by ODIN'ing to JFD and I installed Bionix-v 1.2.1 again. Only thing I have noticed so far is GPS not initiating immediately after it's turned on. I would go into GPS Test app, and turn on GPS after the app is started, but I get no satellites for at least 1 min. I used to get a lock within seconds, not minutes. I will try ODIN again tomorrow and see if it fixes. I guess I was lucky enough not to get a bootloop again though.
But I can't see why you and I would have any issues after the Bionix+Dow combo. Wouldn't ODIN just clear everything up? I even repartitioned when flashing, so my guess is that my system, data, datadata, etc., are all reformatted completely? Am I missing something?

I had the same problem. I flashed DoW and then the next day my phone didn't want to turn on. I pulled the battery and restarted it. It didn't want to start up all the way. It got to the vibrant screen and shut off. luckily for me, my replacement phone that I ordered a week ago came in the same day. I sent off my old phone letting samsung/tmo take care of it.

This exact same thing happened to me.
I too had the phoen bricked after flashing the DOW after Bionix 1.2.1
I have been flashing since the G1. This is the first time I've ever bricked a phone.
Hoping to get it fixed this weekend

Yo OP
Coming from a very scary brick my self, (phone wouldnt even turn on, bad dead horse test).
When your using Odin, are you using v1.7, are you using the correct stock JFD tar, when you repartion, are you using the correct pit file. Sounds to me that your partions are screwed, so try the pit approach first. If you phone wont boot at all after this, with odin open go into download mode by holding the vol rockers only, and plug USB in.
Then flash JFD.

black spirit said:
Yo OP
Coming from a very scary brick my self, (phone wouldnt even turn on, bad dead horse test).
When your using Odin, are you using v1.7, are you using the correct stock JFD tar, when you repartion, are you using the correct pit file. Sounds to me that your partions are screwed, so try the pit approach first. If you phone wont boot at all after this, with odin open go into download mode by holding the vol rockers only, and plug USB in.
Then flash JFD.
Click to expand...
Click to collapse
I spent over 12 hours working on this when it happened to me yesterday. Tried every tar and pit file and all versions of Odin I could find. There is no way to fix it with Odin. It is BRICKED!

If you have not already done this, I recommend doing this: http://forum.xda-developers.com/showthread.php?t=954509
Bay Wolf made a nice software for the computer that pretty much shows you a step-by-step instruction on how to flash to stock, reroot, and flash the new ROM of your choice. This program will push you into download mode, clockwork recovery, etc. There is a video on that link that will also show you a step-by-step instruction. Try that out if you haven't, and let us know how it goes.
That program comes with a PIT and TAR file for you to use as well.

Even if you say it is, this is not a Development thread and belongs in one of the other forums. I understand your frustration, however TW did not flash your phone, you did. Coming on here with a "PSA" that their ROM or Kernel loaded itself on your phone and broke it is not the way it should be done. Did you, before posting this, go to the TW irc for help or pm Sombionix or any other TW Dev?
Since you can Odin, Odin to stock 2.1 then connect to KIES mini while in download mode, if you can, and take the OTA.

drewdude007 said:
I spent over 12 hours working on this when it happened to me yesterday. Tried every tar and pit file and all versions of Odin I could find. There is no way to fix it with Odin. It is BRICKED!
Click to expand...
Click to collapse
I thought the same when it happen to me.
Nothing would work, but went that approach and happy days.
s1_odin_20100512.pit
and
T959UVJFD.tar
are the only ones you need, and if your good with your flashing, just do a pit first, no pda.
And if your still getting to download mode, ect, and dont have the computer /!\ phone icon on the screen, sounds like a soft brick.

jellette said:
Even if you say it is, this is not a Development thread and belongs in one of the other forums. I understand your frustration, however TW did not flash your phone, you did. Coming on here with a "PSA" that their ROM or Kernel loaded itself on your phone and broke it is not the way it should be done. Did you, before posting this, go to the TW irc for help or pm Sombionix or any other TW Dev?
Since you can Odin, Odin to stock 2.1 then connect to KIES mini while in download mode, if you can, and take the OTA.
Click to expand...
Click to collapse
I see where you're going, but he did not blame TW or anyone else. He may just be warning some people/asking for help. I do however agree that he posted in the wrong section.
Also, why would he need to pm sombionix or a TW dev before posting this?

SamVib said:
I see where you're going, but he did not blame TW or anyone else. He may just be warning some people/asking for help. I do however agree that he posted in the wrong section.
Also, why would he need to pm sombionix or a TW dev before posting this?
Click to expand...
Click to collapse
Because he started off with his problem stated as:
1. flashed the latest Bionix
2. Worked great, some bugs, but for the most part without incident.
3. Flashed new DOW Kernel,

Your phone probably IS charging.
Your /efs nodes may be messed up. Do you have a backup of your /efs?
Try reading here: http://forum.xda-developers.com/showthread.php?t=859914

[Q] Please help, I am not sure what I did

I was using odin on my new Samsung Continuum. I used the PDA button in odin to load what I thought was the original Galaxy boot loader and then used the PDA button again to try to install what I thought was the original firmware. After it was done and I restarted my phone appeared to not work. But, with the USB cable plugged in I can hear the phone connecting and disconnecting as if it is repeatedly turning off and on but I never see anything on the screen. Does anyone know what I may have done to it or possibly how to fix it.

well i dont know why u would flash anything other than whats oin this forum?
http://webchat.freenode.net/?channel...ntinuum&uio=d4
irc help... me, trailblazer101, and txwolf1980 are there now

I came here for help after I got the problem then realize I should have come here first. Now I am asking for help to try to fix my phone if possible. Thank you

I do not know how to use the web irc thing

tastingtony said:
I do not know how to use the web irc thing
Click to expand...
Click to collapse
Click on link and make a name. Enter text in box. Click connect
Sent from my SCH-I400 using xda premium

just get a valid odin image and try reflashing it. Don't mess with any other boot loader as it isn't necessary. it should fix your problem once you load a valid image.

tastingtony said:
I was using odin on my new Samsung Continuum. I used the PDA button in odin to load what I thought was the original Galaxy boot loader and then used the PDA button again to try to install what I thought was the original firmware. After it was done and I restarted my phone appeared to not work. But, with the USB cable plugged in I can hear the phone connecting and disconnecting as if it is repeatedly turning off and on but I never see anything on the screen. Does anyone know what I may have done to it or possibly how to fix it.
Click to expand...
Click to collapse
What happened is that you attempted to flash a generic boot loader. Any other 'galaxy s' phone, you might have gotten away with it. But that little 3rd screen at the bottom makes our phone somewhat of an oddball. It doesn't like generic stuff. And it gets really pissy when you try to feed it store brand crap.
My advice: Do exactly what Pattielipp said. Find a good continuum bootloader and flash back. Or, if you made a nandroid, before you tried this, try restoring.

[Q] Can't get into Download Mode after Odin Flash

First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.

mountainmanscg said:
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
Click to expand...
Click to collapse
Try pulling your battery and holding down the power button for a slow count of 20 to see if download mode comes back. After that, you should be good to flash stock ec07 and then recovery kernel. After that, whichever rom you choose. If that doesn't work, I'll try to get into IRC at some point tomorrow (today).

That didn't work either - screen is still blank & it won't progress in Odin. I'll jump back into IRC if anyone has any other ideas - thanks.

i dont know what to tell you continuums are very hard to brick and if u cant get into download mode then theres not that much u can do im afraid I was talking to adam outler about trying the unbrickable mod on a continuum but he does not have one to test. now he got the fascinate to work so id pm him and see if he'll let you send your phone to him

Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...

mountainmanscg said:
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
Click to expand...
Click to collapse
I'll be in irc in a few if ya wanna give it another shot

I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.

PapaKaster said:
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
Click to expand...
Click to collapse
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.

Txwolf1980 said:
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Click to expand...
Click to collapse
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.

PapaKaster said:
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
Click to expand...
Click to collapse
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?

Txwolf1980 said:
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Click to expand...
Click to collapse
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.

PapaKaster said:
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
Click to expand...
Click to collapse
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.

Txwolf1980 said:
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Click to expand...
Click to collapse
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.

PapaKaster said:
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
Click to expand...
Click to collapse
Its all good. Try the suggestions I gave you, when you have time. If they don't work, I'll have some down time tomorrow or sunday. Just let me know, and we'll see if we can make the schedules match