Hey I've got JH2, rooted and OCLF. It's been working great for a month. Last night I pulled the phone out of my pocket and it was off. I turned it back on and check again in 15 minutes, it was off again. Third time it stayed on all night just fine.
Today I tried to go into the Android Market and it kept force closing so I tried to restart the phone, not it just gets to the "S" on loading and hangs there for a while and then the screen goes back and the two bottom buttons stay lite.
I got into recovery mode and wiped the cache but it still won't restart. I did not to the wipe data/factory reset yet. Should I do that next? Will I lose everything?
I just did the factory reset and it's running again.
glad you got it resolved
hello i am having the same problem tried data /factory reset but it is still doing the same thing... i get an error when entering recovery mode
"E:Can't mount /dev/block/mmcb1k0p1
(NO such file or directory)
E:copy_dbdate_media:Can't mount sdcard:copy default media content failed."
this was coming up before the data/factory rest also
any suggestions on how i can fix this ?
ps this is my first android phone so i dont really now how to do much
hakkers420 said:
hello i am having the same problem tried data /factory reset but it is still doing the same thing... i get an error when entering recovery mode
"E:Can't mount /dev/block/mmcb1k0p1
(NO such file or directory)
E:copy_dbdate_media:Can't mount sdcard:copy default media content failed."
this was coming up before the data/factory rest also
any suggestions on how i can fix this ?
ps this is my first android phone so i dont really now how to do much
Click to expand...
Click to collapse
there are much talk about possible fixes here
http://forum.xda-developers.com/showthread.php?t=793404
Well I was running the super dark rom + stupidfast kernal and everything was running great, until i wanted to try stupidfast 1.1.4 and i noticed that it said BLN was disabled by default and followed the link to flash a kernal (had no idea that it was a kernal and that it wasnt meant for our phone) long story short. My phone is stuck at the samsung boot screen i downloaded odin3 and downloaded all the files needed to restore, however everything i do results in the phone still being stuck at the samsung screen then rebooting over and over again
****UPDATE****
FIXED GO TO POST #12 to see how!
Well I was running the super dark rom + stupidfast kernal and everything was running great, until i wanted to try stupidfast 1.1.4 and i noticed that it said BLN was disabled by default and followed the link to flash a kernal (had no idea that it was a kernal and that it wasnt meant for our phone) long story short. My phone is stuck at the samsung boot screen i downloaded odin3 and downloaded all the files needed to restore, however everything i do results in the phone still being stuck at the samsung screen then rebooting over and over agai
Well I was running the super dark rom + stupidfast kernal and everything was running great, until i wanted to try stupidfast 1.1.4 and i noticed that it said BLN was disabled by default and followed the link to flash a kernal (had no idea that it was a kernal and that it wasnt meant for our phone) long story short. My phone is stuck at the samsung boot screen i downloaded odin3 and downloaded all the files needed to restore, however everything i do results in the phone still being stuck at the samsung screen then rebooting over and over again
The stupidfast 1.1.4 kernal was meant for our phone.
It sounds like all you need to do is cold start your phone in download mode. Make sure you have the correct (samsung galaxy s) drivers on your computer.
1) Turn off phone
2) Pull battery and USB out
3) Hold volume DOWN while reconnecting USB
4) Continue Holding volume DOWN and press the power button
(you may now put the battery back in)
You should see a big yellow triangle, this is download mode. From here you can use Odin to flash back to stock. Also, make sure you are flashing the correct image via. odin. We had a guy awhile back who accidentally flashed the stock mesmerize image and his phone really was bricked.
That last sentence brings a smirk to my face for some reason
I think someone needs to come up with a theme that makes the phone look like a brick
chrisexv6 said:
I think someone needs to come up with a theme that makes the phone look like a brick
Click to expand...
Click to collapse
or at least a boot animation of a brick being dropped by a flying android that explodes once it reaches the bottom of the screen.
Sent from my StupidFast, SuperDark Fascinate.
After i flash the stock-i500-recovery.tar.md5 through odin and go to the recovery menu and hit apply sdcard:update.zip it gives me this error message:
E: failed to verify whole-file signature
E: signature verifcation failed
Installation aborted
anyone know what this means or if im supposed to be seeing this?
sounds like you still have the update.zip that clockwork creates on your phone but your not rooted (kind of a guess here). I would flash EVERTHING back with odin, remove your SD Card (where the update.zip is) and just boot the phone to see if it gets you to a setup/home screen.
nmyeti said:
sounds like you still have the update.zip that clockwork creates on your phone but your not rooted (kind of a guess here). I would flash EVERTHING back with odin, remove your SD Card (where the update.zip is) and just boot the phone to see if it gets you to a setup/home screen.
Click to expand...
Click to collapse
tried that and the phone still continues to just hang at the samsung screen and continuously reboots over and over. and when i tried the update.zip it says there's no SD card inserted (obviously since i took it)
Try flashing the odin recovery file. It's in this thread;
http://forum.xda-developers.com/showthread.php?t=782204
It worked for me when I got that error.
GOT IT TO WORK!!!! YES ALL THE BLOOD, SWEAT, AND TEARS PAID OFF!!! If anyone EVER runs into this issue please read this thread:
http://forum.androidcentral.com/fascinate-roms-hacks/44476-bricked-phone-need-help.html
HI
Can anyone help me sort this problem I caused for myself ?
I was trying to flash nordic froyo on defy via rsdlite v4.9 everything looked ok asked me to start phone manualy now its stuck in bootloader
tried factory reset tried wipe cache all i get is E:cant mount CACHE:recovery/command
E:cant mount CACHE:recovery/caller
Ecant mount CACHE:recovery/log
tried to install miui via zip through sd card wont open it
any ideas pleaseeeee
Don’t know if I am qualified to answer your question. Any trouble I had I always found it easier to start completely over with a fresh factory install. I think I have had problems with certain SDs, try changing that out. I bought a used defy that was totally hosed up and this sounds crazy but I had to flash the original rom three times before it began working. ?????
thanks ill give that a try wich one did you flash looking for gingerbread full sbf
just install it via rsdlite again. Be patient.. its quite slow process so dont worry...
now you do this...
switch off phone completely
press and HOLD volume+ button and then the power on button
you will come to bootloader...
connect the usb cable
Start RSDlite(login as administrator in windows or right click and run as administrator)
and flash again... be calm till it finishes and says PASS
After the original tmobile flash I use Nordic froyo. Clean simple no clutter, then flash CM7. i think I can also remember some people having trouble with sdlite I used 5.2.
also noticed RSD LIte will sometimes hang and say "manualy reboot" I leave the room come back in a half hour or so and the phone has rebooted itself.
thanks guys
Thanks guys got it sorted flashed full sbf tmobile sweet. Merry christmas to you all
Is there anyway to check if the eMMC fails?
I was using ICS for several days, and I powered on the Nook after it was out of power one nite. Suddenly, it stops at the Cyanogen "loading..."
I'ved tried to boot into Recovery, and it stops at the Cyanogen "loading into recovery" ..
After several tests and trying, I finally use bootable uSD to boot into CWR 3.0.2.8, and now it shows can't mount boot/system/data if I try to format these partitions.
I am wondering if the eMMC is broken, and how can I fix it.
Appreciated and sorry for my bad English.
chinian said:
Is there anyway to check if the eMMC fails?
I was using ICS for several days, and I powered on the Nook after it was out of power one nite. Suddenly, it stops at the Cyanogen "loading..."
I'ved tried to boot into Recovery, and it stops at the Cyanogen "loading into recovery" ..
After several tests and trying, I finally use bootable uSD to boot into CWR 3.0.2.8, and now it shows can't mount boot/system/data if I try to format these partitions.
I am wondering if the eMMC is broken, and how can I fix it.
Appreciated and sorry for my bad English.
Click to expand...
Click to collapse
Try again with CwMR 3.2.0.1
votinh said:
Try again with CwMR 3.2.0.1
Click to expand...
Click to collapse
Same. (using 1gb_clockwork-3.2.0.1-eyeballer.img)
The error message:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
Formatting /boot
Error mounting /boot!
Skipping format...
Done.
BTW, Nook won't boot directly from uSD, I have to use boot menu to choose booting from uSD card.
I too need help but I formated my emmc boot partition and gets stuck here won't power off either.. anybody we need some help please
Sent from my Inspire 4G using Tapatalk
Fixed it f'in yes!
All i did was followed this
http://forum.xda-developers.com/showthread.php?t=1448186
it booted into new recovery blue one then i took the sd out and rebooted into recovery and it worked i have no idea what happend i did not flash any thing to my knowledge
hope this help someone as dumb as me!
Ok so mine will not boot into rom. Every time I turn it on it goes strait to cwrm I can get it to boot select by holding down home but if I try to select to boot from emmc it still goes to cwrm and every time I go in to boot select it wants to select sd I do not have a sdboot I have always ran every rom from the reg emmc. Also I was running the nightly ics cm9. Please someone help me out with this please.
dincdoes.me said:
All i did was followed this
http://forum.xda-developers.com/showthread.php?t=1448186
it booted into new recovery blue one then i took the sd out and rebooted into recovery and it worked i have no idea what happend i did not flash any thing to my knowledge
hope this help someone as dumb as me!
Click to expand...
Click to collapse
Sent from my PG06100 using Tapatalk
dincdoes.me said:
All i did was followed this
http://forum.xda-developers.com/showthread.php?t=1448186
it booted into new recovery blue one then i took the sd out and rebooted into recovery and it worked i have no idea what happend i did not flash any thing to my knowledge
hope this help someone as dumb as me!
Click to expand...
Click to collapse
You are lucky. I am still stuck as usual.
Help~~ I can boot into CWM on uSD card, but can't mount /sdcard
I don't know what happens I was stuck like you then loaded that post onto a 4gb SD and hoped to boot into a Tom but recovery posted up then all I did was push reset and bam miui booted [previous ] rom and configuration I don't know if what I did really helped but all I know was it was bootlooping at cyanogenmods logo with booting symbol. Since its my wife's tab I just through 1.4.1 nook rom so she's happy now.
Did you try what I did to see if it would help out at all and do anyone know what is going on with this flashing was never this weird 6months ago when it was mine running honeycomb..
Sent from my A500 using Tapatalk
dincdoes.me said:
I don't know what happens I was stuck like you then loaded that post onto a 4gb SD and hoped to boot into a Tom but recovery posted up then all I did was push reset and bam miui booted [previous ] rom and configuration I don't know if what I did really helped but all I know was it was bootlooping at cyanogenmods logo with booting symbol. Since its my wife's tab I just through 1.4.1 nook rom so she's happy now.
Did you try what I did to see if it would help out at all and do anyone know what is going on with this flashing was never this weird 6months ago when it was mine running honeycomb..
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Yes, I did try the method you mention. The only thing I got was a blank screen.
I tried the "fdisk" method, and found that there is no block device, so I think the hardware (eMMC) was broken. Just need to confirm that.
Thx anyway.
NOTE : this is not my own procedure but i just wanna share this with you guys since some tab users here are having problems restocking their tab to gingerbread, i have also added some notes and troubleshooting in case there will be an issue flashing the rom
link to the original post credits of course to the writer > how to restock p1000 to gingerbread 2.3
btw, this is a complete and full tutorial/step-by-step guide on how to restock gingerbread rom, so if you did not download all requirements, restocking wont be successful
my story and experience : hey guys, yesterday night, i softbricked my galaxy tab p1000 which was running cm9, it turned out like that when i went to recovery and wipe all data, cache, dalvik, even system, and boot. i tried reflashing the cm9.zip but as it was installing its update, my tab suddenly boot into battery icon, meaning it was already empty (maybe, dont have any idea), then, since it was already 12 midnight, there were no internet cafes open in our village, so i went out though somehow it might be dangerous for me, then, i found an internet cafe open. i rent a pc, first, i tried to go to download mode, so some drivers will be installed, but it kept showing "unkown device recognized" bla bla.. still.. i didnt lose hope. so i searched on google, and i found this site > http://suzhipackz.blogspot.com/2012/07/how-to-re-stock-samsung-galaxy-tab.html , when i finished downloading odin, i opened it to check whether it will read my device or not, first three attempts, it did not. so, i thought of downloading samsung kies so the drivers will be installed (safest way really to install samsung drivers), then i still looked for a smaller file (while waiting for kies to complete its download), then i found that there is a smaller zip file for you to install samsung drivers (see attachment below), i installed it, but still odin cant detect my device (try it, might be just on the pc i rented), so i just waited for kies to complete.. after a couple of minutes, successfully downloaded kies, and installed it. i tried connecting tab to pc with odin opened, i rebooted to download mode again and reconnect tab to pc, and voila! odin read my device! so, since pc has already detected my device, i just waited about 1 1/2 hours for the rom and the pit file and the db data file.... after almost 2 and half hours of crossing fingers, i have revived my tab and restocked it to gingebread 2.3!
HOW TO RESTOCK SAMSUNG GALAXY TAB p1000 to 2.3.3 GINGER BREAD STOCK ROM?
HERE:
- ALL REQUIREMENTS
.......Samsung KIES > LINK FOR SAMSUNG KIES
.......ODIN3 v1.7 > LINK FOR ODIN3 v1.7
.......p1000xxjq1_p1000xxjq1_p1000xxjpz < THIS IS STOCK ROM > LINK FOR STOCK ROM
.......gt-p1000_mr_PIT > LINK FOR PIT
.......dbdata.zip > LINK FOR DBDATA
.......place it all in ONE FOLDER in desktop "unzip it all"
PLEASE DOWNLOAD ALL OF THIS BEFORE YOU CONTINUE..............
PROCEDURE:
.......Turn off tab
.......open ODIN3 v1.7
.......click on the PDA and select - p1000xxjq1_p1000xxjq1_p1000xxjpz in your computer
.......clink on the PIT and select - gt-p1000_mr_PIT
.......Check only RE-PARTITION, "uncheck auto reboot and f.reset time"
.......in your tab press and hold "VOLUME DOWN AND POWER BUTTON"
.......if DOWNLOADING APPEAR leave it like that
.......now, connect you tab in computer
.......if ODIN detects your phone PRESS START in ODIN
.......wait for it until success, after that disconnect your tab
(if for an instance it stuck on downloading mode but you have already finished flashing, do not worry, you just have to manually hold the power button for it to boot up, it might get into recovery, so please reboot the system (it might also be a touch recovery so please tab the home touch key to continue) then if it keeps on booting on "samsung", do not worry, you are not done yet with the restocking procedure, so please proceed to the next step)
.......press and hold power button until it will turn off
.......open ODIN3 v1.7 again
.......UNCHECK it all "re-partition, auto reboot, f.reset time"
.......click on the PDA and select dbdata.zip
.......press and hold "VOLUME DOWN AND POWER BUTTON" again
.......if DOWNLOADING APPEAR leave it like that
.......now, connect your tab again
.......if ODIN detects your phone PRESS START in ODIN
.......wait for it until success, after that disconnect your tab
(again, if it is stuck on downloading mode but you have successfully done the flashing, hold power key to turn the tab on, and if it keeps on booting to "samsung" again, do the next step)
.......This time we will go to CLOCKWORKMOD by holding "VOLUME UP and POWER BUTTON"
(then wipe data, and wipe cache, (volume keys to scroll up or down, and home touch key to select) and reboot system, wait for a minute or two and home screen will now appear)
.........................................NOW YOUR IN STOCK ROM AGAIN 2.3.3 GINGER BREAD
another note : when there is an error for example that flashed on your tab screen like a color red "E:\ " something like that, do not worry, it is the external sd card (i dont have one so it was an error then but not a problem, no worries) just let it be, wait until it finishes
some files are already attached below coz they are just small in size
clicking "thanks" button is enough for me..
just sharing this with you guys...
happy restocking!! :laugh:
Update Prob
mastersymvts said:
I want get full file samsung tab p1000. For flash my tab.. Tq
Click to expand...
Click to collapse
Hi Guys is crashed my tab.
i get it functional with the stock rom 2.3.6
P1000XXJPZ
Kernel 2.6.35.7
[email protected]#2
Build gingerbread.XWJQ8
i wantetd to Flash to a newer rom but noting worked any ideas?
I modified a couple years ago the tab to include the sd space as System space. I do Not rember how i did this....?
If i get throught the stock partion all would be find but i couldn´t.
Regular mod Installation doesnt work, rooting also isn´t possible ...
readin with Heimdall shows this message
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
I hope you guys have any ideas.
Greets
P1000XXJQ1_P1000XXJQ1_P1000XXJPZ.zip do you stil have this?
Hotfile is down
Stock Rom's Link doesn't work
So, I tried your recipe and it worked pretty well for me, but the annoying thing about it was the links to the Stock Rom, so i got the below link as a mirror for those who are interested.
p1000xxjq1_p1000xxjq1_p1000xxjpz < THIS IS STOCK ROM >h-t-t-p-:-/-/-f-i-l-e-s-c-r-o-p-t-u-b-e-.-c-o-m/file/7806957-p1000xxjq1-rar
Couldn't find the given URL
LeMasoud said:
So, I tried your recipe and it worked pretty well for me, but the annoying thing about it was the links to the Stock Rom, so i got the below link as a mirror for those who are interested.
p1000xxjq1_p1000xxjq1_p1000xxjpz < THIS IS STOCK ROM >h-t-t-p-:-/-/-f-i-l-e-s-c-r-o-p-t-u-b-e-.-c-o-m/file/7806957-p1000xxjq1-rar
Click to expand...
Click to collapse
I couldn't locate the file.
need new links. prefer putlocker/mediafire etc.
THKS a Lot!!!!
Great!! many thanks my p1000 have a second life
http://www.4shared.com/get/B-DeOju6/P1000XXJQ1.html here you go its a miracle what using google could do using the right search methods if you would thanks i would really apreciete it guys and gals.
I just flashed my tab stock 2.3.6 from cm11 using odin. But stuck in bootloop. After going to recovery i get error message (red) as in pic. Where did i go wrong?
Thank you for this and sorry for reviving an old thread. It sucks when links go dead (or offer that sketchy ilivid crap). Here is a mirror:
Mirror for samsung galaxy tab P1000 stock odin TAR: stock-P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar
https://mega.co.nz/#!7wohlbKT!i3K7lvIfombRdJEzUUP-fiIZQS1qeStOr16tty-T86w
And a mirror to download ODIN 3 v 1.85: odin3-v1.85.zip
https://mega.co.nz/#!W553iL7B!vZTVktUwwg35a_glWGgBEaIDg11JVgkvFZ94mpzECas
2.3...
I think that there was a couple of kernel and Android security flaws in Linux 2.6, not fixed by Samsung Electronics Co. Ltd..
Samsung Tab P1000 stuck in nowhere!
First of all thanks the OP for the brilliant post on how to re-stock GB on P1000.
Earlier today I was fooling around with my P1000 to update it from CM11 to Omnirom 5.0.2, troubles started there. I was trying to install the TWRP recovery over CWM, and that is when all hell broke loose.
1. P1000 couldn't mount my internal SD. The tab was perfectly booting to a previous version of JB CM sapir, which I don't have any clue appeared where from. The storage showed the 2 GB internal memory, but the 12GB internal SD was missing out.
And the CWM errors were E:/can't mound internal SD
2. Now, after wiping data, dalvik, battery stats, formatting and all that, the tab doesn't even boot into the OS. The moment the power button is on, CWM initiates a count down saying, trying to mount SD, but unable to do so. After 20 seconds, the tab starts this whole process again, and thus a loop.
3. I tried to re-stock to GB; but my tab isn't being detected by Odin in download mode. Odin detects the tab when it is turned on and when the tab is on countdown-restart-countdown loop; but not in download mode.
I am a total noob, and I don't want to throw my tab away as I am a student and can't afford to get a new one Someone please help me to fix the issue. Thanks in advance!
PolaritySwitch said:
First of all thanks the OP for the brilliant post on how to re-stock GB on P1000.
Earlier today I was fooling around with my P1000 to update it from CM11 to Omnirom 5.0.2, troubles started there. I was trying to install the TWRP recovery over CWM, and that is when all hell broke loose.
1. P1000 couldn't mount my internal SD. The tab was perfectly booting to a previous version of JB CM sapir, which I don't have any clue appeared where from. The storage showed the 2 GB internal memory, but the 12GB internal SD was missing out.
And the CWM errors were E:/can't mound internal SD
2. Now, after wiping data, dalvik, battery stats, formatting and all that, the tab doesn't even boot into the OS. The moment the power button is on, CWM initiates a count down saying, trying to mount SD, but unable to do so. After 20 seconds, the tab starts this whole process again, and thus a loop.
3. I tried to re-stock to GB; but my tab isn't being detected by Odin in download mode. Odin detects the tab when it is turned on and when the tab is on countdown-restart-countdown loop; but not in download mode.
I am a total noob, and I don't want to throw my tab away as I am a student and can't afford to get a new one Someone please help me to fix the issue. Thanks in advance!
Click to expand...
Click to collapse
Can you flash at least the PIT in countdown mode(after you flashed the PIT, it goes to download mode)
Flash during countdown...
black_blob said:
Can you flash at least the PIT in countdown mode(after you flashed the PIT, it goes to download mode)
Click to expand...
Click to collapse
Thank you! I tried doing that. On the success/failure counter on Odin, it shows as a failure
PolaritySwitch said:
Thank you! I tried doing that. On the success/failure counter on Odin, it shows as a failure
Click to expand...
Click to collapse
Can you try booting the Vol- or the Vol+ button until you see the flashscreen?
Weird.(and making the tablet unbrickable needs a mod which I hope that you don't do)
black_blob said:
Can you flash at least the PIT in countdown mode(after you flashed the PIT, it goes to download mode)
Click to expand...
Click to collapse
black_blob said:
Can you try booting the Vol- or the Vol+ button until you see the flashscreen?
Weird.(and making the tablet unbrickable needs a mod which I hope that you don't do)
Click to expand...
Click to collapse
Well yes, Vol+ takes me to CWM recovery and Vol- takes me to download mode. Odin detects my Tab on CWM; I tried flashing the PIT which resulted in a failure. And on the download mode as I mentioned earlier, Odin doesn't detect my Tab
Well, I am all ears about the mod you're mentioning about, but let's just hope for now that I don't need that
PolaritySwitch said:
Well yes, Vol+ takes me to CWM recovery and Vol- takes me to download mode. Odin detects my Tab on CWM; I tried flashing the PIT which resulted in a failure. And on the download mode as I mentioned earlier, Odin doesn't detect my Tab
Well, I am all ears about the mod you're mentioning about, but let's just hope for now that I don't need that
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1312391
very Helpful
you Saved my life ... thank you veeeeeeeery much
Thanks for sharing this method. I quiet had a problem with the drivers and the link for them isn't available but I got a way to fix it. Thanks anyways.
Can you guys help me out with my p1000 tab too its bootlooped its in a stock recover and unrooted . I tried wiping data but nothing happens
thank you soo much