Was wondering what type of profiles people got setup on setcpu for some good battery durations oc'ed.
I'm currently running at 1417MHZ and only profile I have setup is screen off. 275 / 275 conservative. Priority is at 100.
Sent from my HTC Vision G2
I'm running at 1305MHz.
Screen off 245min/245max
Temp > 38.2 C 245min/768max
Battery < 15% 245min/768max
Mines going at 200 mhz to 1000 mhz, on demand governor, and a powersave bias of 20%. No profiles. Why? Because to implement the profiles setcpu has to remain in memory. It does not feel slow at all and I'm getting terrific battery life.
Sent from my G2.
mejorguille said:
Mines going at 200 mhz to 1000 mhz, on demand governor, and a powersave bias of 20%. No profiles. Why? Because to implement the profiles setcpu has to remain in memory. It does not feel slow at all and I'm getting terrific battery life.
Sent from my G2.
Click to expand...
Click to collapse
sorry im a newbie, how do you set the "on demand governor?" .and powersave bias, u get that from the advanced tab where it says "powersave bias (1-1000)" and just put 20?
donaliar said:
sorry im a newbie, how do you set the "on demand governor?" .and powersave bias, u get that from the advanced tab where it says "powersave bias (1-1000)" and just put 20?
Click to expand...
Click to collapse
Well the scaling governor is on the main page, right under the minimum frequency slider. You are only half right on the powersave bias: 20 would be 2%. So to do 20%, you need 200. Sorry if I wasn't clear.
Sent from my G2.
mejorguille said:
Well the scaling governor is on the main page, right under the minimum frequency slider. You are only half right on the powersave bias: 20 would be 2%. So to do 20%, you need 200. Sorry if I wasn't clear.
Sent from my G2.
Click to expand...
Click to collapse
Oh alright. my sampling rate is 50000. up threshold 95. ignore nice load 0. and powersave bias 200. does that sound about right? or should i change somehthing else? Thanks for the help!
Got my profiles at:
Screen off 245/245 priority 100
Temp > 102F 245/768 priority 80
Battery < 10% 245/245 priority 70
Battery <15% 245/368 priority 65
Battery <25% 245/768 priority 60
Charging/full 245/1459 priority 50
I just set these up so ill report back with how it turned out
mejorguille said:
Mines going at 200 mhz to 1000 mhz, on demand governor, and a powersave bias of 20%. No profiles. Why? Because to implement the profiles setcpu has to remain in memory. It does not feel slow at all and I'm getting terrific battery life.
Sent from my G2.
Click to expand...
Click to collapse
Questions:
Did you notice battery drain with setcpu in memory?
How is the battery temp?
Does the powersave bias mean that you will never scale to the peak value?
Had the phone off the charger since 11am.
Moderate call usage
Heavy texting
Moderate internet usage
Music for roughly 3hours straight
Wireless tethering on Xbox live for roughly an hour
At 9:15pm I have exactly 40% with my profiles from my post above
what does 245/768 mean?
nvm i got it
potentdro said:
what does 245/768 mean?
Click to expand...
Click to collapse
245 min, 768 max
So its a bit after 1am and just over 14hrs after a full charge. While using my profiles and info as posted in my above 2 posts along with 2hrs of GPS usage, light phone call usage, and heavy internet usage my phone finally died 14hrs later with the Gov module on conservative with posted profiles and OC'd at 1459.
Although abought 10min prior to it dieing I did attempt to submit this post from the phone but near the end of the post it froze up, showed the desktop and my battery notification showed 0% and the phone then rebooted itself but I got a bootloop on the "g2" screen and had to pull the battery to fix it.
After 10% battery level I was experiencing lagging and slowness while online so I'm assuming because of my profile setting of 245/245 at that battery level and what probably caused my bootloop.
*Edit: I must say I'm pretty impressed. I had my Nexus one alot more heavily modified than my g2 and only OC'd to 1113 with similar daily usage and I would have to charge it one time at some point during the day to last me throughout the night.
SRT102JZ said:
Got my profiles at:
Screen off 245/245 priority 100
Temp > 102F 245/768 priority 80
Battery < 10% 245/245 priority 70
Battery <15% 245/368 priority 65
Battery <25% 245/768 priority 60
Charging/full 245/1459 priority 50
I just set these up so ill report back with how it turned out
Click to expand...
Click to collapse
What do you have set up in "Main" tab?
Thanks. I'm going to try your settings.Battery life is disappointing...
Sent from my T-Mobile G2 using Tapatalk
Okay, so I got my G2 about two weeks ago, and have been running set CPU with these settings since then.
Main profile: 1478 max / 245 min
Screen Off: 245/245, Priority 100
Temp > 100.4 F: 368/245 Priority 97
Temp > 96.8 F: 768/245 Priority 95
Battery < 20%: 245/245 Priority: 82
Battery < 30%: 368/245 Priority: 81
Battery < 40%: 768/245 Priority: 80
Charging/Full: 1478/245 Priority 60
Charging USB/Full: 768/245 Priority 55
Charging AC/Full: 1478/245 Priority 50
On light use I've gotten almost two days, by light use I mean only a few phone calls or text messages and data turned off. On Normal use I've been averaging around 16 hours, and on heavy use I've been getting around 10 hours. Pretty good battery life, I'm pleased with it being my first Android phone, was a black berry user before this.
I have SetCPU set with all of these profiles, other then charging profiles and it seems that the "Screen Off" profile isn't working. I have it set to 245/245 and it still seems to be at 1497/245 because the battery gets hot and drains very fast (about 8 hours with literally zero use). It shows idle Cell Standby and Phone Idle taking up most of the battery (a combined total of about 85%) anyone know why it wouldn't be working properly?
SetCPU has SU permissions and profiles are enabled... Anything else?
Is SetCPU a lot better then the free CPU tuner? I know it's only 1.99, but I'm feeling cheap at the moment.
ScottRTL said:
I have SetCPU set with all of these profiles, other then charging profiles and it seems that the "Screen Off" profile isn't working. I have it set to 245/245 and it still seems to be at 1497/245 because the battery gets hot and drains very fast (about 8 hours with literally zero use). It shows idle Cell Standby and Phone Idle taking up most of the battery (a combined total of about 85%) anyone know why it wouldn't be working properly?
SetCPU has SU permissions and profiles are enabled... Anything else?
Click to expand...
Click to collapse
you have to make sure the priority is at a higher level than all the others...like 100
abenco said:
Is SetCPU a lot better then the free CPU tuner? I know it's only 1.99, but I'm feeling cheap at the moment.
Click to expand...
Click to collapse
You can get the full version on xda for free. It's nice to donate though.
Sent from my T-Mobile G2 using XDA App
need some help
my htc wont show any clock speeds past the 806mhz. ...any ideas? i tried to perflock disable and it says it is already..and in custom profiles it shows still only max up to 806
edt** read a custom kernal may be required...im on stock. thats probably why
Related
Hey guys. I know there are numerous threads about setcpu but there isn't one specifically for different settings people are running on their phone.
This is to help others have an idea of how to prolong their battery daily...
Here is mine..
Rom: cm6 froyo
Kernel: cm6 snap 3
Launcher: adw
Setcpu...
1. Charging/full - 998/245
2. Screen off - 245/245
3. Battery < 70% - 883/245
4. Battery < 50% - 768/245
5. Battery < 25% - 537/245
6. Temp > 50° - 576/245
1. Ondemand
2-5. Powersave
6. Conservative
I'm down to 40% after 12 hours of usage... Texting, browsing, emails, and an hour of slingbox!
Lets see what others are using and their settings.
Sent from my PC36100 using Tapatalk
Rom: cm6 froyo
Kernel: cm6 snap 3
Launcher: adw
Setcpu...
Temp > 40 ...... 768/245 ondemand
Battery < 20%.. 499/245 powersave
Battery < 30%.. 576/245 powersave
Battery < 40%.. 768/245 powersave
Battery < 50%.. 998/245 ondemand
Screen Off ....... 348/128 powersave
Charging ......... 768/245 ondemand
I get about 18-24 hours per charge. I am overclocked to 1.15. I actually use the phone and would consider myself a moderate user.
spiicytuna said:
Rom: cm6 froyo
Kernel: cm6 snap 3
Launcher: adw
Setcpu...
Temp > 40 ...... 768/245 ondemand
Battery < 20%.. 499/245 powersave
Battery < 30%.. 576/245 powersave
Battery < 40%.. 768/245 powersave
Battery < 50%.. 998/245 ondemand
Screen Off ....... 348/128 powersave
Charging ......... 768/245 ondemand
I get about 18-24 hours per charge. I am overclocked to 1.15. I actually use the phone and would consider myself a moderate user.
Click to expand...
Click to collapse
Where is powersave?
spiicytuna said:
Rom: cm6 froyo
Kernel: cm6 snap 3
Launcher: adw
Setcpu...
Temp > 40 ...... 768/245 ondemand
Battery < 20%.. 499/245 powersave
Battery < 30%.. 576/245 powersave
Battery < 40%.. 768/245 powersave
Battery < 50%.. 998/245 ondemand
Screen Off ....... 348/128 powersave
Charging ......... 768/245 ondemand
I get about 18-24 hours per charge. I am overclocked to 1.15. I actually use the phone and would consider myself a moderate user.
Click to expand...
Click to collapse
do you overclock it under the charging profile? because you have that listed at 769max.
do you find the min 128 for your screen off profile to lag trying to turn the screen back on?
I have no powersave. Only userspace,ondemand,performance options.
^ same i think that is only an option in froyo?
trixr750 said:
do you overclock it under the charging profile? because you have that listed at 769max.
do you find the min 128 for your screen off profile to lag trying to turn the screen back on?
Click to expand...
Click to collapse
i notice a lag at 128, i keep mine at 245
ROM: CyanogenMod 6 (07/30 Nightly)
Kernel: CMSnapUV0.1d
_________
SetCPU:
Min: 1.228Ghz
Max: 1.344Ghz
Scaling: ondemand
Sampling Rate: 40000
Up Threshold: 40%
Ignore Nice Load: 0
Powersave Bias: 0
_________
I've played around a lot and found this to be the most stable for my EVO.
~Jasecloud4
jasecloud4 said:
ROM: CyanogenMod 6 (07/30 Nightly)
Kernel: CMSnapUV0.1d
_________
SetCPU:
Min: 1.228Ghz
Max: 1.344Ghz
Scaling: ondemand
Sampling Rate: 40000
Up Threshold: 40%
Ignore Nice Load: 0
Powersave Bias: 0
_________
I've played around a lot and found this to be the most stable for my EVO.
~Jasecloud4
Click to expand...
Click to collapse
What's the idea for changing sampling rate and threshold? I would like to know if that helps with the performance and battery life.
Sent from my PC36100 using Tapatalk
And jase. How long does your phone battery last?
Sent from my PC36100 using Tapatalk
trixr750 said:
What's the idea for changing sampling rate and threshold? I would like to know if that helps with the performance and battery life.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Sampling Rate is akin to reaction time to change, judged in microseconds. Up threshold is the load point at which the processor increases it's speed from min to max. (I know, I know, it's a lot more technical but for simplicity's sake).
Setting sampling and up threshold low means that at the slightest increase in load, the processor will try to increase its speed. This is helpful with performance, but may impact battery life as the chance of you running at higher speed is greater.
________
Battery life at 1.344Ghz isn't that bad, as 1.267, 1.305, and 1.344 all run at the max of 1350mv (which so far is the max that the Snapdragon can handle). So, at my current settings (with my standard battery), I get probably 3.5 hours of non-stop use, and maybe 24 hours of standby if I'm lucky. But...I've got some pretty sweet Quadrant and Neocore scores.
________
~Jasecloud4
What good is underclocking at power levels that are greater than 15%? I like to use my phone as a SMARTPHONE as long as I can... 1115 mhz peak for ALL except screen off and under 15%.... when its plugged in (either charging or charged) I bump the minimum speed up to 512 or 768... Everything is real smooth!
I still get a full 8 hour day of Shoutcast streaming at work with those setting (along with texting, facebook, twitter, etc.)
I'm using the EViO Series Rom. I have been unplugged since 330am. I'm going on 10 hours of being unplugged and still I got 61% battery left and according to my "Battery Left Widget" that breaks down to about 10hrs and 46 minutes left. which totals to be somewhere between 19-21 hours of battery total since i unplugged my phone at 330am.
My SetCpu settings are:
1152000/245760
charging AC/FULL 998/537
CHARGING USB/FULL 998/537
BATERRY <50 883/245
TEMP > 50 652/245
BATTERY < 25 499/245
SCREEN OFF 384/245
i just loaded this up because it seemed that my Fresh ROM was a battery killer, not sure that it was the ROM, but whatever the combination i had going, i could only get about 5 hours per charge. What kernel are you using and what are you usage amount and battery life for these settings?
plmiller0905 said:
I'm using the EViO Series Rom. I have been unplugged since 330am. I'm going on 10 hours of being unplugged and still I got 61% battery left and according to my "Battery Left Widget" that breaks down to about 10hrs and 46 minutes left. which totals to be somewhere between 19-21 hours of battery total since i unplugged my phone at 330am.
My SetCpu settings are:
1152000/245760
charging AC/FULL 998/537
CHARGING USB/FULL 998/537
BATERRY <50 883/245
TEMP > 50 652/245
BATTERY < 25 499/245
SCREEN OFF 384/245
Click to expand...
Click to collapse
xlGmanlx said:
i just loaded this up because it seemed that my Fresh ROM was a battery killer, not sure that it was the ROM, but whatever the combination i had going, i could only get about 5 hours per charge. What kernel are you using and what are you usage amount and battery life for these settings?
Click to expand...
Click to collapse
I just installed the rom and that was it...plus my apps from titanium backup. I think the rom have the Netarchy Kernalalready built into it. Here is the link:
http://forum.xda-developers.com/showthread.php?t=736810
I am somewhat a heavy user...I stream Pandora, check the net almost constantly, check emails, text messaging a lot, check FB & Twitter and a call every now and then.
Just to give you an idea..from the last time I posted which was at 1220...my battery is now at 52% and the "battery Widget" says I have 9hrs and 44mins left of battery usage.
lafrad said:
What good is underclocking at power levels that are greater than 15%? I like to use my phone as a SMARTPHONE as long as I can... 1115 mhz peak for ALL except screen off and under 15%.... when its plugged in (either charging or charged) I bump the minimum speed up to 512 or 768... Everything is real smooth!
I still get a full 8 hour day of Shoutcast streaming at work with those setting (along with texting, facebook, twitter, etc.)
Click to expand...
Click to collapse
I also like to USE my phone, hence wanting my battery to last as long as possible. I use 1.15 from 50% - 100% then I switch back to the stock speeds to start to conserve power. I found for me I am usually flashing something (also meaning indirectly charging) or fooling around before I even get to 50%. So 90% of the time I am always at 1.15. That being said the times my battery has gotten < 30% and I was at 768. I didn't notice as large of a difference as you'd think unless I was playing a 3D game. *shrug* it's all personal preference. I have a full SMARTPHONE experience and utilize my phone to its fullest.....
With Fresh 1.0.1 and netarchy 3.7.3c, in order of priority:
Screen off: 245/245
Charging/Full: 768/1152
Battery < 25%: 245/768
Battery < 100%: 576/998
Just set those, we'll see how they work. I read it was a bad idea to set mins lower than 245, so I'm playing it safe there. I never really noticed problems with having 245 mins across the board, but I'm giving it a bump for normal < 100% usage. My screen is off most of the time anyway.
I use my phone constantly as well so I'm trying to find a good medium for battery and performance. I'm gonna try to scale mine to 1.1 until the 75% mark and see how that goes.
Running a custom rom plus a custom kernel does help for me so far.
Sent from my PC36100 using Tapatalk
Rom:Baked Snack 9.6
Kernel: hero baked 8
LauncherPro
setcpu
temp > 50 499/245
screen off 245/245
charging/full 998/245
battery < 25 460/245
battery <100 998/245
I just moved to baked snack this morning, so I can't really give a good battery usage.
What are you guys getting in the new rooted 2.2 rom.
Sent from my PC36100 using Tapatalk
For all those who use SetCPU, can you please post your profiles you use. Any issues you've experienced etc. Thanks!
I use 1075 max 245 min as my main profile and then 499 max 245 min for screen off and battery < 15%. All of them are ondemand.
No issues so far.
I use 1190 max 245 min for everyday use, and 576 max 245 min for charging, screen off, and battery < 20%.
is set cpu an app? does this conserve battery life or what is the purpose? any negative effects?
seeking said:
is set cpu an app? does this conserve battery life or what is the purpose? any negative effects?
Click to expand...
Click to collapse
yes its a program. you must have root in order to use it. you can find it here on XDA. It can conserve your battery. I have yet to have any bad feed back about it.
I was wondering what would be considered optimal settings for SetCpu. I amn running BaconBits and am not sure how I should do the settings.
Any help would be appreciated!
Thanks.
i have mine set at:
Profile 1 : 806 MHz max, 245MHz min, On Demand, priority 50
Profile 2 : 245 MHz max , 245MHz min, On Demand, for when the screen is off, priority 50
if i change the MHz, i change it higher on profile 1 for whatever i need it for then i just scale it back down to 806 when i am done...
Mines pretty much the same as the one above save for max clock speed being 1500Mhz.
Sent from my HTC Vision using XDA App
I have my scaling set ondemand, have setcpu set at boot, with 1497 max and 245 min, with profiles for various states of the phone.
My profiles:
Screen off: 245 max, 245 min - Priority=100
Battery temp >104: 806 max, 245 min - Priority=90
Battery <10: 245 max, 245 min - Priority=80
Battery <20: 368 max, 245 min - Priority=70
Battery <30: 768 max, 245 min - Priority=60
Charging/Full: 1497 max, 245 min - Priority=50
I get well over a day of use, even with moderate-heavy usage, even with my overclocking on Evil's Sense ROM.
If you search google for an "overclocking 101" thread you should find a rather large ongoing break down of setcpu and the most efficient way to use it. I believe its on one of the droid forums, awesome info.
tazz9690 said:
I have my scaling set ondemand, have setcpu set at boot, with 1497 max and 245 min, with profiles for various states of the phone.
My profiles:
Screen off: 245 max, 245 min - Priority=100
Battery temp >104: 806 max, 245 min - Priority=90
Battery <10: 245 max, 245 min - Priority=80
Battery <20: 368 max, 245 min - Priority=70
Battery <30: 768 max, 245 min - Priority=60
Charging/Full: 1497 max, 245 min - Priority=50
I get well over a day of use, even with moderate-heavy usage, even with my overclocking on Evil's Sense ROM.
Click to expand...
Click to collapse
I just stole the rest of your settings, hope you dont mind!
WarBird87 said:
I just stole the rest of your settings, hope you dont mind!
Click to expand...
Click to collapse
By all means, have at it!
Main profile: 245 - 1017 on demand
Charging/Full: 1017 - 1017 performance 90 priority
Screen Off: 245 - 245 performance; mainly as this mode will bypass the need to poll/sample for CPU speeds, thus reduces some CPU load. 100 priority
Battery < 20%: 245 - 768 on demand 75 priority
i decided to put the SetCPU widget on my homescreen last night so i could see if the profiles were actually changing as my battery ran lower... and my phone got reaaaalllly sluggish to the point where i would have to wait a few seconds for it to flip back and forth between screens... i deleted the widget thinking that might have caused it, but it was still laggy... so i unclicked on the profiles for battery and got it back to 806MHz and it was fine again...
im guessing that it supposed to slow down the phone when the CPU drops below 806MHz but i didnt think it would be that bad... anyone else experiance this?
WarBird87 said:
i decided to put the SetCPU widget on my homescreen last night so i could see if the profiles were actually changing as my battery ran lower... and my phone got reaaaalllly sluggish to the point where i would have to wait a few seconds for it to flip back and forth between screens... i deleted the widget thinking that might have caused it, but it was still laggy... so i unclicked on the profiles for battery and got it back to 806MHz and it was fine again...
im guessing that it supposed to slow down the phone when the CPU drops below 806MHz but i didnt think it would be that bad... anyone else experiance this?
Click to expand...
Click to collapse
What are the profiles you are using? The ones you copied shouldn't have run into any conflicts... except when you're under 20% battery where the CPU is throttled under 368.
What is your powersave bias?
Speaking of powersave bias, could anyone tell me some optimal settings for the setCPU advanced tab? Don't mean to derail this thread, I've just never used that tab.
Sent from my T-Mobile G2 using XDA App
SeReaction said:
What are the profiles you are using? The ones you copied shouldn't have run into any conflicts... except when you're under 20% battery where the CPU is throttled under 368.
What is your powersave bias?
Click to expand...
Click to collapse
I believe i was right at 20% batt or right below,so that could have been the issue... I havent messed with anything on the advanced tab as i dont know much about it, the powersave bias is still set to 0
I have HTC heroc 200 alltel running fresh 2.40 rom firerat mtd 160 10. what should I set CPU to
Sent from my HERO200 using XDA App
does anyone else feel that their battery lasts longer without using setcpu at all? I mean I love what setcpu can do but in terms of power efficiency, even without overclocking, for some reason I feel like my battery last longer without it.... or am I just crazy?
j.books said:
does anyone else feel that their battery lasts longer without using setcpu at all? I mean I love what setcpu can do but in terms of power efficiency, even without overclocking, for some reason I feel like my battery last longer without it.... or am I just crazy?
Click to expand...
Click to collapse
I used to get about a whole day without setcpu. With setcpu, same amount of usage, I get well over a day and a half before having to charge it up.
HI guys,
I wanted to share with you what i have done on my phone, i got over 50 hrs of battery life on it.
Now i did not have a lot of phone calls these 2 days, but i did have one phone call that lasted almost an hour.
I also surfed the web, and downloaded a few apps under this battery as well.
its showing 2 days 2 h 30 m and i still had 4 percent left.
Honestly I do not know if this is good or not, but iv seen where people are happy with 20+ hours so this should be in the zone of goodness.
my setup
Burnt Droid lasted build.
setcpu- underclock only, no overclock,
juice- purchased the ultimate, so at night it kills everything but phone.
here is this pic
later
Daryl
Cool! I'll have to give it a try.
Sent from my ADR6300 using XDA App
need way more info. kernel? profiles if any? underclock amount? battery size? bump charged / SBC? rom link? i don't recall ever hearing of burnt droid
baram said:
need way more info. kernel? profiles if any? underclock amount? battery size? bump charged / SBC? rom link? i don't recall ever hearing of burnt droid
Click to expand...
Click to collapse
I believe its an EVO rom
http://forum.xda-developers.com/showthread.php?t=745738
Can anyone confirm this report? I've been toying with multiple ROM's/Kernel's and the best I get out of it with normal usage is about 8-10 hours.
GodFather25 said:
Can anyone confirm this report? I've been toying with multiple ROM's/Kernel's and the best I get out of it with normal usage is about 8-10 hours.
Click to expand...
Click to collapse
you might want to check out this thread >> http://forum.xda-developers.com/showthread.php?t=948090
I get great battery life (70-80* hours from full charge to dead *This battery life was directly after a wipe of the battery stats. After a few weeks of regular use I'm seeing about 60-70 hours of life (full charge > dead) with these settings:
ROM: SkyRaider 3.5
Kernel: Incredikernel
I'll echo another member's post. Turn things off that you aren't using (i.e. 3g, wifi). I will only turn these things on when in use (checking email, surfing web, etc). Along with 3g, and wifi, your screen brightness is a huge battery killer. I have mine set around 20%.
Another thing I found to help is having SetCPU profiles set. Here are my settings:
main: 1075 max, 245 min. ondemand (set on boot checked)
screen off: 245 max, 128 min. priority 100
Temp>39 C: 245 max, 128 min. priority 99
Charging/Full: 1075 max, 245 min. priority 98
Battery < 20% 883 max, 245 min priority 97
Battery < 40% 998 max, 245 min priority 96
The above settings give me outstanding performance while the phone is in use, and really help to save battery power when not in use.
Dang. Impressive! That's for sure. I don't like the idea of underclocking much though. How was performance? Everything running smoothly?
AceAndroidN3rd said:
Dang. Impressive! That's for sure. I don't like the idea of underclocking much though. How was performance? Everything running smoothly?
Click to expand...
Click to collapse
Runs beautifully. I'll even run pandora with the screen off (245 max) without hiccups.
I have been tweaking my G2 ever since I got it and it seems I found a pretty good configuration that gives me awesome battery life of 30 hours on medium light use and stock battery. Now I wonder if I can make it any better.
Ill post my configuration and hope that other will do the same to see if we can squeeze more battery life out of our phones!
CONFIG
SetCPU
screen on - 1000 Max, 122 Min, conservative
screen off - 245 Max, 122 Min, conservative
JuiceDefender/Setting Profiles
wifi on at home and work only
data off when wifi on
data off when screen off, toggle on for 1m every 30m
Home screen
three widgets
beautiful widets @ 4 hr refresh
genie widget @ 4 hr refresh
agenda widget
System
MIUI rom 1.7.22 www.miui.us
streamline5 kernel http://forum.androidspin.com/showthread.php/6555-Streamline5-Nightly-CM7-Test-Kernel-2.6.35.13
darkyy's memory boost script http://forum.xda-developers.com/showthread.php?t=998976
radio 26.0.03.26 with rmk's ril matcher http://forum.xda-developers.com/showthread.php?t=1021463
USAGE - medium light
< 10 calls approx 20 min total
< 50 text
< 15 emails
30 min navigation
45 min slacker radio
15-30 min gaming
30 min genie widget + browser on news
SCREEN - @28 HRS
If you can get more, post a screen, your config and usage. Sense hibernate doesnt count!
Pershoots kernel is the ultimate secret. And not to OC past 1.2 cause there is no noticeable difference once you go past that point.
Sent from my HTC Vision using XDA Premium App
For me it's called rmk40's virtuous g-lite v1.0.2. lol I regularly get 2~ish days without any special tweaking.
xsteven77x is right too, pershoot's kernel is by far the most efficient and nothing above 1.2 Ghz as the voltage requirements increase a lot i believe.
the secret to great battery life: don't use your phone.
xsteven77x said:
Pershoots kernel is the ultimate secret. And not to OC past 1.2 cause there is no noticeable difference once you go past that point.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
If you are using pershoot's kernal, what governer are you setting it to to max battery life? On demand?
Thanks
ill give pershoot a try
crevis24 said:
If you are using pershoot's kernal, what governer are you setting it to to max battery life? On demand?
Thanks
Click to expand...
Click to collapse
His only has on demand, performance, and user space (which I don't even know what that one does). I leave it on demand because performance keeps the CPU ramped up too often for good battery life with no noticeable improvement in actual performance lol.
Sent from my HTC Vision using XDA Premium App
Pershoot impressions @250min 1010max:
1) The ondemand has obviously been tweaked by pershoot to be VERY favourable to the 250mhz. This unfortunately makes the phone just very slight make a stutter step before ramping up to do a CPU intensive task.
2) The kernel is great when the phone is not regularily used, but seems to draw more power than Streamline5 when something is actually running but not requiring full CPU time as Streamline does provide other governors.
3) The kernel seems to take its time going into "deep sleep" 1 2 day uptime and only 17 hours of deep sleep.
Will continue the testing but seem like if you use the phone in a "medium light" usage, Streamline seems to be the better choice.
UPDATE: I am sitting at 64% @ 9h with pershoot...
im using a power sucking rom, virtuous unity. i just set my phone up so it will at least last a day with a little bit of battery left over. Here are my settings
Wake min: 245mhz Wake max: 1516mhz Governer:Ondemand
Sleep min: 245mhz sleep max: 356mhz Governer: conservative
also use juice defender with advanced settings and a auto memory killer with system tweaks for optimal battery life. i get about 12 to 13 hours.
evilcuber said:
im using a power sucking rom, virtuous unity. i just set my phone up so it will at least last a day with a little bit of battery left over. Here are my settings
Wake min: 245mhz Wake max: 1516mhz Governer:Ondemand
Sleep min: 245mhz sleep max: 356mhz Governer: conservative
also use juice defender with advanced settings and a auto memory killer with system tweaks for optimal battery life. i get about 12 to 13 hours.
Click to expand...
Click to collapse
i noticed you are with rogers as i am too, try "3g only" i had similar setup on a sense rom before and can get a few more hours out of it
i remember with sense i was getting 18 hours max. with the same usage outlined in op
lalalandrus said:
i noticed you are with rogers as i am too, try "3g only" i had similar setup on a sense rom before and can get a few more hours out of it
i remember with sense i was getting 18 hours max. with the same usage outlined in op
Click to expand...
Click to collapse
How do you set 3g only? If i set gsm only in settings, i only get edge networks
Sent from my HTC Vision using XDA App
evilcuber said:
How do you set 3g only? If i set gsm only in settings, i only get edge networks
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
in sense roms, two ways, gsm = 2g that explains why you only get 2g. 3g is wcdma
1) dailer -> *#*#4636#*#* -> phone info -> scroll to btm -> WCDMA ONLY -> reboot
2) menu-> settings -> mobile network settings -> network type selection -> 3g only
seems like i found another way to squeeze more battery life out, i extracted the virtuous rom's o/c daemon and uninstalled setcpu. will report with more data but so far everything is working better than setcpu (might be placebo effect)
I update the new radio 26.10.04.12
http://forum.xda-developers.com/showthread.php?t=970809
and matched rils
http://forum.xda-developers.com/showpost.php?p=16489050&postcount=807
and extracted from virtuous unity the performance tweak script for memory from /system/etc/init.d/10-virtuous_performance and the virtuous_oc from /system/xbin
went back to streamline 5 and install daemon tweaker
http://forum.xda-developers.com/showpost.php?p=16015003&postcount=43194
RESULT = 40 hours of battery! (same usage as first post of not more)
I don't know what's wrong with my battery...
I use CyanogenMod 7.1.0 RC1 with cpu OnDemand 245-1209 MhZ, just a few widgets (tajm, battstatt, desktop visualizer), no wlan and average usage. With this setup some people reported they got a battery life of 16-18 hours. I have to charge after 8 hours...with a brand new stock battery :/
lalalandrus said:
USAGE - medium light
< 10 calls approx 20 min total
< 50 text
< 15 emails
30 min navigation
45 min slacker radio
15-30 min gaming
30 min genie widget + browser on news
SCREEN - @28 HRS
Click to expand...
Click to collapse
In your screenshot, "Display" shows as only 1%. In my experience, unless you never actually turn on the screen, the display will tend to be the biggest power consumer. What brightness level do you have it set to? Can you please tap on "Display" and post a screenshot of that? I want to see how long your screen has been on during those 28 hours.
Even at the dimmest setting, an idle CPU @ 245 MHz, and in airplane mode, my phone draws 90 mA. About 60 mA of that is the display and G sensor. At full brightness, the phone draws a total of 220 mA, or 190 mA for the display.
On a stock 1300 mAh battery, 16% remaining is 208 mAh, meaning 1092 mAh has been consumed. 1% of that is about 11 mAh. At minimum brightness, that will run the display for 11 minutes (11 mAh / 60 mA = 0.183 h). At maximum brightness, only 3.5 minutes.
It looks like you had the display on for at least 90 minutes (only nav, gaming, browser), which means your display is only drawing about 7.3 mA, which I do not believe is possible, given the LCD panel in the DZ. That works out to only 27 mW (at 3.7 volts), which is roughly one-tenth the power draw of similar displays where I could find the specs.
So are you just leaving the screen turned off the whole time?
Longest time off charger for me is 2 days and 7 hours. My secret? MIUI with 1800mAh battery. 'Nuff said.
How long battery life do the people with those giant 3600mah batterys have? Just wonderin
Sent from my HTC Vision using XDA App
Pershoot sounds intresting.
How can I backup my current kernel just in case? NAND backup?
taob said:
In your screenshot, "Display" shows as only 1%. In my experience, unless you never actually turn on the screen, the display will tend to be the biggest power consumer. What brightness level do you have it set to? Can you please tap on "Display" and post a screenshot of that? I want to see how long your screen has been on during those 28 hours.
So are you just leaving the screen turned off the whole time?
Click to expand...
Click to collapse
most battery life brags come from people who dont really use their phones...
ill see if i can get actual screen on time. The point is not to brag rather to find the best config when people actually use their phones. That said 16 hours i was sleeping...