I have T-Mobile Dash 3G but it got water damage and besides the random popup that i managed to suppress....... THe Menu Button doesn't work more specifically the right soft key button..... How can i change another button to function as the right soft key
EX...
Change the Camera button to be considered as the Right Soft key... So when i press the camera button the menu shows up or what ever the R. Soft Key does.
Related
Anyone knows how to hard reset my Wizard???
Press and hold, all at the same time, the comms button (top left in potrait) the voice recorder (top right in potrait) and insert the stylos to the soft reset button. Remember to held the 2 hardware buttons until test appears on the screen.
Press and hold, all at the same time, the comms button (top left in potrait) the voice recorder (top right in potrait) and insert the stylos to the soft reset button. Remember to hold the 2 hardware buttons until text appears on the screen.
Go to SETTINGS -> SYSTEM -> CLEAR STORAGE
only1salty said:
Press and hold, all at the same time, the comms button (top left in potrait) the voice recorder (top right in potrait) and insert the stylos to the soft reset button. Remember to hold the 2 hardware buttons until text appears on the screen.
Click to expand...
Click to collapse
this one appeared to work.
then you have to press the green phone (Call/Send) button to proceed.
With a broken power button, is there any way I can get my xda2 into bootloader mode so I can change the ROM?
i doubt it unless you take it apart and shortcurcit the to points that the powerbutton is connected to
would prob be easier to put in a new button then i guess
I may be wrong but doesn't the power button actually put the phone into suspend mode?
Would it work to map the "suspend" function to another button (like the calendar button)? Or does a hard reset only work with the usual specific hardware buttons?
no it's not the only function
clicking on a suspece software shortcut
while reseting the device dont result in a hardreset
I have a solution. i have the same problem. Get a paperclip, and insert it into the hole where the power button should be. Slide it in until your device turns on/off. Then hold it there carefully, and press and hold the ACTIOn key and the reset button.
Works for me!
Recently I am having problems with my phone, and am wondering if it is a software or hardware problem.
I have tried loading the TNT4 rom & WS5SE roms (this is a g4), and there is no change (im on the Tnt4 one now).
The touchscreen works okay, but the soft key buttons do not. The right bottom one is okay, the left one triggers the right one, the send button show the letters "uytga" on the phone screen when i press them, the end button shows "mn" or something, the camera button works perfect, the comm manager button is the same as the voice button (even when i map it with a program it says "button 4").
It even happens on the soft keys on the keyboard when i slide it out.
Also I used Start-sSPL to put the roms on. Is there a way I can get the OEM one back on or fix the button problem?
Any help will be appreciated.
Hi i found this
Code:
To do a hard reset.
Press both soft keys and insert stylus into soft reset button and press.
Release the soft reset button and keep pressing the soft keys.
When the "This operation will delete all your personal data, to manufacturer default" appears on screen.
Press Green call button to restore manufacturer default, or press other keys to cancel.
The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
but where is the SOFT RESET BUTTON? I'm from czech rep. thanks
Softresetbutton is the small hole on the left side of your device. On the top on the left side youve got voice command, under this the volume and down at the botton youve got the softresetbutton.
take the stylus to use it.
-------------------------------------
Sent via the XDA Tapatalk App
Hello,
I've tried switching the key codes in qwerty.kl from POWER to DPAD_CENTER and rebooting phone, but this does not seem to affect anything.
Is there another way to make the DPAD_CENTER act as the power button? My power button is broken and I'd like a way to reboot/shutdown the phone.
Thanks