Have any of you guys had any problems with Wi-Fi on the Galaxy Tab?
I've been trying to connect this device with a wide range of routers and keep ending up with no or a very poor signal.
Just upgraded to firmware P1000XWJJ3 and the problem persists.
bernard black said:
Have any of you guys had any problems with Wi-Fi on the Galaxy Tab?
I've been trying to connect this device with a wide range of routers and keep ending up with no or a very poor signal.
Just upgraded to firmware P1000XWJJ3 and the problem persists.
Click to expand...
Click to collapse
no, i don't have such problem on JID firmware
BTW how did you update it to JJ3?
chowdarygm said:
no, i don't have such problem on JID firmware
BTW how did you update it to JJ3?
Click to expand...
Click to collapse
I would like to know how you installed JJ3 as well.
Sent from my GT-P1000 using XDA App
Mine JJ2 also is not so good with receiving signal where my laptop or phone easily do.
Khisha said:
Mine JJ2 also is not so good with receiving signal where my laptop or phone easily do.
Click to expand...
Click to collapse
How far away from the router? Any walls between?
My Tab works pretty well if i'm close to the router, but with some distance between - oh say 5-6 meters - it rapidly decreases and soon enough drop the connection all together. Very strange, been trying different routers and different settings and it's the same all over the board.
Regarding the firmware (JJ3), just go to http://www.samfirmware.com/ click "Tablets" and select firmware and then install with Odin. Easy as one, two, three.
MIne works fine with through thick walls on the balcony. What wireless security/ preamble type have you got? Is the router set to 20/40? Is it transmitting at 100% or auto?
The router doesn't matter. If i sit on my balcony smoking a cigarette, I either have a weak signal or the tab switches to 3G. My phone or laptop hold the signal easily.
The distance is like 5 meters and 3 wals between us. One of them concrete. But my phone holds the signal there, while my tab doesn't. On the other hand my wife's SE Xperia X10 barely holds inside the living room. So I guess android in general is not that good with wireless.
Khisha said:
The router doesn't matter. If i sit on my balcony smoking a cigarette, I either have a weak signal or the tab switches to 3G. My phone or laptop hold the signal easily.
The distance is like 5 meters and 3 wals between us. One of them concrete. But my phone holds the signal there, while my tab doesn't. On the other hand my wife's SE Xperia X10 barely holds inside the living room. So I guess android in general is not that good with wireless.
Click to expand...
Click to collapse
Of course the router matters mate. Instead of guessing why dont you try to troubleshoot... surely logic alone will tell you that its not your tab as a)noone else is having this problem b)your xperia is.
If it ain't broken - don't fix it. This router serves half a dosen of devices. Only android ones are having issues.
My laptop, my wife and my daughter's laptops, my htpc and my son's desktops as well as my phone are OK with it. It is on 100% and no encryption. I have it for years now and it never disappointed me. Why should I blame the router?
For one thing, if youve had it for years it is possible there are firmware updates that will immediately improve the connection of both your working devices and the newer, less backwards compatible android devices.
There are also security frames and CTS overhead to consider. Your router may just be too old to communicate with the newer radios in the android devices. These things happen all the time. Just google wifi problem and add any device you can think of to the end of that... there will be people conplaining about weak signal everywhere, and its usually the routers that are at fault.
EDIT: If it aint broke dont fix it is not an acceptable philosophy for a gadget lover
bernard black said:
Regarding the firmware (JJ3), just go to http://www.samfirmware.com/ click "Tablets" and select firmware and then install with Odin. Easy as one, two, three.
Click to expand...
Click to collapse
Well we have several people tried flashing this firmware and it is failing.
Can you be more specific on how you flashed it?
Which PIT file did you use?
Did you select repartition in ODIN?
How is the browser in JJ3? is it smoother than shipped stock?
Thanks.
ftgg99 said:
MIne works fine with through thick walls on the balcony. What wireless security/ preamble type have you got? Is the router set to 20/40? Is it transmitting at 100% or auto?
Click to expand...
Click to collapse
I've tried a multitude of different settings and it can't even compare to my Nexus One or Galaxy S. Keeps dropping the connection and report a signal strength of about 10%, it's driving me nuts! My current configuration is as follows:
Router: Netgear WNR3500v2
Firmware: DD-WRT v24-sp2 (08/07/10) min
Network:NG-Mixed
Channel:2 (2.417 GHz)
Channel width: 20 MHz
TX Power:71 mW (Default setting)
Security: TKIP+AES
clubtech said:
Well we have several people tried flashing this firmware and it is failing.
Can you be more specific on how you flashed it?
Which PIT file did you use?
Did you select repartition in ODIN?
How is the browser in JJ3? is it smoother than shipped stock?
Thanks.
Click to expand...
Click to collapse
Simply flashed with default ODIN settings and both EUR firmware and EUR PIT-file ( Galaxy Tab / .PIT File: DOWNLOAD. (EUR). I didn't do a wipe before nor did I clear dalvik cache or any such thing.
Can't really tell about the browser, from my point of view it feels pretty much the same.
Sunspider with JID: 7 757,8 +/- 1.8%
Sunspider with JJ3: 7 208 ms +/- 2%
explanation
The problem is almost certainly your old wifi router having bugs with PSP (power save mode). Android relies on the PSP standard to reduce the power usage on Wifi, your laptop and other old devices probably don't. I've seen old routers disconnecting almost immediately with android devices...
You can try setting "Wifi Sleep Policy" set to "Never" (will impact battery live, obviously). Though there was a bug fixed in ~July where Android would still use PSP, and the tab might not have the fix yet.
But the best fix is to buy a new router. It is broken, standards-wise, and needs to be fixed. Also, newer wifi routers are a lot faster and generally hold the connection better, so its really a no-brainer...
Ditto my brother!
Volker1 said:
The problem is almost certainly your old wifi router having bugs with PSP (power save mode). Android relies on the PSP standard to reduce the power usage on Wifi, your laptop and other old devices probably don't. I've seen old routers disconnecting almost immediately with android devices...
You can try setting "Wifi Sleep Policy" set to "Never" (will impact battery live, obviously). Though there was a bug fixed in ~July where Android would still use PSP, and the tab might not have the fix yet.
But the best fix is to buy a new router. It is broken, standards-wise, and needs to be fixed. Also, newer wifi routers are a lot faster and generally hold the connection better, so its really a no-brainer...
Click to expand...
Click to collapse
I have to agree... I have two instances of WiFi use with my new Tab:
1) At home, older Netgear router (not that old mind you) - DG834PN - Does 802.11b/g/Super G
2) At work, brand new Netgear router (brand spankin' new) - Wireless N etc
At work, my connection on the tab is consistent without a drop out, fault less and constantly fast. Even the signal strength is good across the other side of the building.
At home however on my older router (no Wireless N) it's slow, signal strength is poor and constant drop outs are present. I need to hit "Retry" on the network connection box so often at home.
So yeah I feel that should be fairly conclusive. The Tab seems to like brand new wireless hardware.
No wonder. 802.11N is much stronger WRT to power since it has 2 antennas. But it is still the tab to blame that it doesn't hold a signal of standard equipment.
Actually, the problem you're having at home is super g. Its not a wireless standard. If it is working in 20/40 auto mode, just switch it to 20 only. This should improve your network connection in general.
Also gonsider using g only - b is pretty redundant by now.
ftgg99 said:
Actually, the problem you're having at home is super g. Its not a wireless standard. If it is working in 20/40 auto mode, just switch it to 20 only. This should improve your network connection in general.
Also gonsider using g only - b is pretty redundant by now.
Click to expand...
Click to collapse
My router lists b and g, g only or Auto 108mbps.
I have had it selected on g only for a while now.
What settings does it have for the super g... does it give you the option of disbling pairing or something like that? It could be the bonding that causes your disconnects.
Related
Hi all,
I just got my device, and still thinking whether to send it back in 7 days. My main complain is the wifi. I have never seen more than 2 bars (out of 4) signal strength, even when sitting 2 meters from the router. Moreover it always drops the connection. I realized it when I tried to use IE for browsing, since that doesn't tolerate it and I keep getting the connection lost messages. Seems that Opera can live with it, but I see when the connection dropped during the page load. Youtube watcher also cannot manage to download videos when the signal is dropped.
The Tx/Rx rate also changes chaotically from 1Mb/1Mb to 54Mb/36Mb.
Before you ask: the Power Mode of wifi is set to "Best Performance", since this is the only way it is usable.
Anybody else with similar experiences?
Any solution?
I really appreciate any help, I would like to keep it!
I have no problems what-so-ever with the wifi on my D2...
It runs very well, in all applications that can use it.
- and I have full signal when I am within 5 meters of the router.
I haven't changed any settings on the device, and the router is running on WPA2-PSK at a channel not used by any of my neighbours.
Maybe you have many wireless networks in your area?
Hi,
I have more or less your problems (I opened a thead about it the day I unpacked my D2 but wasn't really condiderated). Here's my condition: I have 3 HTC devices...Artemis-->regular functioning (balanced power), TytnII-->Power Performance MUST be set to high performance, Topaz..well I could connect with balanced power but since I upgraded radio I have to keep it set to best performance, otherwise I would get "fake" connections (connection established but no data taffic). I don't really bother to have to set it like that because the connection is dam fast, which compensates the higher power consumpion.But beside this, I must say that my router is not very friendly with my D2,e.g. when I don't get a connection,I restart it and it works (this must have to do with DCHP service). I have much less trouble connecting alsewhere. So ,what to say? Try to change radio...Do you have other wireless devices working regularly in the same area?Do you have an original rom?You could also try to change wifi channel..would be happy to help
Hi,
Thank you for the answer. I have original ROM, just checked the radio, it is: 3.43.25.19. I didn't experience "fake connections" when it is connected, it is so .
I cannot change the wifi channel, the same router is used by others. However it cannot be the cause of my issues since my notebook's network works fine on the same router.
Changing the radio... seems a good idea. It is my very first smart device, I even thought that this version number was for the hardware, not the software . I will find out how to do it, maybe give it a try. Hope it is an officially supported action .
Hi Lamsebamsen,
The TD2 sees 4 wifi networks, my notebook sees 8. Is it many or not? I think the 4 which the TD doesn't see is many .
foldip said:
Hope it is an officially supported action .
Click to expand...
Click to collapse
I'm afraid not, as you would have to HardSPL your device first. There would still a way to get back to your original configuration but I don't know if you are prone to do so, that depends on how much responsability you can take on your device (is it from work or..). Another thing to try is to manually configurate your connection (e.g. assign D2 always the same IP, but watchout for network collisions!router should be set aswell)
How far from the WiFi HotSpot can your X1 get before the connection is useless? I'm in a house and it barely works in the next room (newer house, walls made of drywall). My brother has an iPod Touch that works all over the house perfectly (same router). I'm wondering if there is something wrong with the WiFi radio on my X1?
i get v good coverage from the x1 as good as the iphone. try changing your radio firmware
WhyBe,
Is it set to best performance or best battery?
Go under settings to check.
Cheers.
Doesn't it depend on the HotSpot itself ?- I mean on the router, its signal strength and etc...I connect to my router trough 2 brick + concrete walls and have no problems at all...Always connected in every room
cooin said:
Doesn't it depend on the HotSpot itself ?- I mean on the router, its signal strength and etc...I connect to my router trough 2 brick + concrete walls and have no problems at all...Always connected in every room
Click to expand...
Click to collapse
same , even good outside/inside the neighbours house ,
be sure to have the 1.15 or 1.16 radio (or smthing like that , the new ones)
+what poisonwolf said
and dont buy a metal case for ur phone
also helps if i slide open the phone for me ... and its good to face the router too (not with ur back towards it)
cooin said:
Doesn't it depend on the HotSpot itself ?- I mean on the router, its signal strength and etc...I connect to my router trough 2 brick + concrete walls and have no problems at all...Always connected in every room
Click to expand...
Click to collapse
I can always connect to my router from the door on the street (I live on the first floor) and everywhere in the house including the bedroo with router being on the corridor outside.
And I did not tweak anything in my EnergyROM 3.0
Thanks all. I have never specifically changed my radio firmware. Is this something that is updated when I change ROMs? I've went from R1a to R2a to R3a. Does the radio get changed with these?
I have the X1 set to best performance.
It depends on what kind of router you have. The cheap ones are crappy. I have a medium spec one and I get good connectivity through 3 walls.
I have a LinkSys G router. It is pretty common. Everything I use works fine with it (3 laptops and iPod Touch). Only the X1 can see it but not connect.
WhyBe said:
I have a LinkSys G router. It is pretty common. Everything I use works fine with it (3 laptops and iPod Touch). Only the X1 can see it but not connect.
Click to expand...
Click to collapse
Did you see the settings in the phone that allow you to use better Wi-Fi reception, but get poor battery life? I had problems with Wi-Fi until I set it to "better performance" rather than "better battery life".
Yes, it is set to best performance. My X1 recognizes the router but doesn't connect. I'm wondering if there is some other problem?
EDIT: OK, I just discovered that if I turn off the phone radio, the WiFi works properly. Is it supposed to be this way?
with linksys and all other routers really one have to upgrade the firmware once in awhile
to get best support with newer devices
WhyBe said:
Yes, it is set to best performance. My X1 recognizes the router but doesn't connect. I'm wondering if there is some other problem?
EDIT: OK, I just discovered that if I turn off the phone radio, the WiFi works properly. Is it supposed to be this way?
Click to expand...
Click to collapse
Nope. There is a problem. I have no idea what it could be though . Maybe an update is a good thought.
I only use stock ROMs and haven't really tweaked my system beyond factory state. So I don't see why I need to update anything. I'm thinking there is some sort of conflict between my internet settings for the phone and the internet settings for the WiFi connection?
WhyBe said:
I only use stock ROMs and haven't really tweaked my system beyond factory state. So I don't see why I need to update anything. I'm thinking there is some sort of conflict between my internet settings for the phone and the internet settings for the WiFi connection?
Click to expand...
Click to collapse
Facepalm.jpg
Update the router not the phone .
WhyBe said:
Yes, it is set to best performance. My X1 recognizes the router but doesn't connect. I'm wondering if there is some other problem?
EDIT: OK, I just discovered that if I turn off the phone radio, the WiFi works properly. Is it supposed to be this way?
Click to expand...
Click to collapse
Mine did that when I 1st tried to set it up, it would find the network (hidden) ok, but would not connect. No matter what I tried, even though 2 pc's (wired), laptop (wireless), xbox (wired) & iPod touch (wireless) were working fine.
I gave up on the X1 and turned my attention to the router, tried a static IP for the X1 etc (it's back on DCHP now), after rebooting the router, the X1 connected and worked fine and it has ever since. I have no idea why - but initially it would not connect - something funny with the router.
I have a netgear router and every now and then kicks me off. i have to disable my wifi on the x1 and reconnect or even power off the router and back on for it to work.
Turn off your router for 1 minute and power back on then try to reconnect your x1.
I have a Linksys WRT160N router and it actually doesn't even detect it when it transmits mixed speed, only of I put it on B and G it detects it.
Otherwise the signal is average, a bit worse then my laptop.
WhyBe said:
How far from the WiFi HotSpot can your X1 get before the connection is useless? I'm in a house and it barely works in the next room (newer house, walls made of drywall). My brother has an iPod Touch that works all over the house perfectly (same router). I'm wondering if there is something wrong with the WiFi radio on my X1?
Click to expand...
Click to collapse
I only use Wi-Fi at my university. Well basically my Wi-Fi works everywhere around campus, at the dorms, and at the movie theater right next to school.
It's freaking great, but I prefer 3G. I just can't afford it.
Every time i connect nexus 4 to my home wi-fi. Every other device gets terrible connection speed... Before nexus 4 my Nexus 7 had steady speeds up to 20mbps. With nexus 4 connected speeds go down to 5-3 mbps and even when i disconnect n4 from my home wi-fi router still acts really strange and i have to reboot it. Anybody experienced anything like that?
skyrocket727 said:
Every time i connect nexus 4 to my home wi-fi. Every other device gets terrible connection speed... Before nexus 4 my Nexus 7 had steady speeds up to 20mbps. With nexus 4 connected speeds go down to 5-3 mbps and even when i disconnect n4 from my home wi-fi router still acts really strange and i have to reboot it. Anybody experienced anything like that?
Click to expand...
Click to collapse
I have three desktop computers, an iPad, an iPod, a Roku unit, and two smartphones sharing the same wifi signal. My speeds don't seem to vary any regardless of the number of devices sharing it at any given time. I would have to call my service provider if I found myself in your situation.
Buddy3927 said:
I have three desktop computers, an iPad, an iPod, a Roku unit, and two smartphones sharing the same wifi signal. My speeds don't seem to vary any regardless of the number of devices sharing it at any given time. I would have to call my service provider if I found myself in your situation.
Click to expand...
Click to collapse
Yep, same.
To the op, I'd say either reboot the router (which you probably have done) and / or see if there's a firmware update for the router.
If no cure, call your internet provider.
Ok.. Forgot to mentioned that n4 also loses wifi connection from time to time.
Seems like im not the only one.. People post similar problems.
https://code.google.com/p/android/issues/detail?id=40065
my nexus has never dropped wifi connection to any router you may have hardware issues..
skyrocket727 said:
Ok.. Forgot to mentioned that n4 also loses wifi connection from time to time.
Seems like im not the only one.. People post similar problems.
https://code.google.com/p/android/issues/detail?id=40065
Click to expand...
Click to collapse
I have seen this before. It happens in mixed networks (old B laptop used to crash the WiFi AP when G clients were also connected).
1) Check for a firmware update to your router. This is most likely where your issue is. The router speed should drop and increase as needed, but buggy firmware may only keep in last slowest speed until a reboot.
2) Mixed encryption (WPA & WPA2) is a nightmare Force "WPA2 only with AES only" -or- "WPA only with TKIP only". Some clients may try to use WPA with AES and this was what was crashing my AP at the time.
3) If you still have issues, try using "G&N" only, or even force G only. Some older G clients don't hear N traffic, so they just transmit on top of it.
4) Last resort, look for a used router that can run DD-WRT firmware. Personally, I will never go back to OEM router firmware.
Hope this helps...
i used Wi-Fi Analyzer and it showed 2 really strong signals on the same channel.. one being mine and the other someone's else. i manually changed it from 11 to channel 5 and everything back to normal/// 20mbps just like before!
skyrocket727 said:
i used Wi-Fi Analyzer and it showed 2 really strong signals on the same channel.. one being mine and the other someone's else. i manually changed it from 11 to channel 5 and everything back to normal/// 20mbps just like before!
Click to expand...
Click to collapse
Guess your neighbour will be pleased too !:laugh:
Hi every one. I just got my N4 last week and i experiense the exact same thing!!!!
this is realy bad because every time i use the wireless network every body in the house starts complaining because my N4 shuts down all connections here.
It works alright with the main router wich is a thomson. but it fails with the other two routers (that are Belkin - N) that are only access points!
I realy want this fixed because not having internet at home is quite bad!
I have had my phone for over a month and for the last 5 days I have experienced really poor wifi performance. I've read that there has been a lot of problems with D-Link routers and such but my wifi was working OK up until the last week and I do not use D-Link (although the chips maybe the same from what I have read). I have tried to see whether it can be related to an app update but I can't systematically test that. Dropped the phone a couple of times on the floor from my sofa, can this be it?
I get full signal when standing next to the router but the signal drop dramatically when moving away. Mobile signal and transfer speeds are all OK. I will try and test other routers when I get the chance.
Any thoughts?
----------------------
Stock GT-I9505
Kaspersky Mobile Security installed (I've read somewhere that this might be a problem?)
Home router TP-Link (TD-W8961ND v1.1)
Work router TP-Link (TD-W8901G 3.2)
Strange...
Couple of questions?
1) Are you on 802.11G or 802.11N at home? (I know the TD-W8901G is 802.11G only)
2) If on 802.11N at home are you running the antenna at 2.4 or 5Ghz?
3) Have you checked your router's antenna (assuming you have an external antenna) for damage or disconnection?
4) Do you have a case on your phone? Does the signal get better without the case on it?
5) Is there anything else in the house that could be interfering with the 2.4Ghz wireless signal (wireless cameras, cordless phones, etc.)?
-Mike
mcapozzi said:
1) Are you on 802.11G or 802.11N at home? (I know the TD-W8901G is 802.11G only)
Click to expand...
Click to collapse
It is set to 802.11N only
mcapozzi said:
2) If on 802.11N at home are you running the antenna at 2.4 or 5Ghz?
Click to expand...
Click to collapse
2.4Ghz
mcapozzi said:
3) Have you checked your router's antenna (assuming you have an external antenna) for damage or disconnection?
Click to expand...
Click to collapse
Yes
mcapozzi said:
4) Do you have a case on your phone? Does the signal get better without the case on it?
Click to expand...
Click to collapse
I use the Samsung flip case. I have also tested by removing the case completely.
mcapozzi said:
5) Is there anything else in the house that could be interfering with the 2.4Ghz wireless signal (wireless cameras, cordless phones, etc.)?
Click to expand...
Click to collapse
The TV uses our wlan and of course a couple of other phones too.
The router at home is a TD-W8961ND v1.1. If I stand in an adjacent room at home (4-5m), door open, I can see the router then I have -70dBm according to the Wifi Analyzer app. Is that what can be expected? Thing is that I use the phone from upstairs, concrete floor and it has been ok, no problem streaming Netflix and such but that doesn't work now. No problems from my desktop computer which also use the wlan.
This is so fuzzy that I am going to start recording the signal strength to get some references. I tested my laptop at work today at a specific location from where I normally use the phone and the signal was worse on the laptop too (Windows 8 Pro and signal showed 1 bar, then full signal strengh, 1 bar and so on). Damn. I am slowly getting cross eyed here.
I have deactivated all bloatware on the phone, removed apps I do not use and one app I have been suspicious of is Wordfeud but of course I have no concrete information on that. Remember from my old HTC DZ that it seemed to be hard on the network on the phone.
Gotta sleep and thanks for your reply!
I have had the same problem with my galaxy s4. wi-fi had appeared connected on the phone but web pages were not loading. got a replacement s4 thinking it was the phone. had the second phone for a week and was working fine and then installed kaspersky mobile and wi-fi was very intermittent again. Did not occur to me initially and a lot of research got me my result. Had tinkered with TKIP and AES settings on modem as some people had luck with that but that was due to D-link routers as well known. uninstalled kaspersky mobile and wi-fi has worked perfectly ever since! There may be certain older kaspersky mobile software versions still compatible but dont know which one as yet.
faztak said:
I have had the same problem with my galaxy s4. wi-fi had appeared connected on the phone but web pages were not loading. got a replacement s4 thinking it was the phone. had the second phone for a week and was working fine and then installed kaspersky mobile and wi-fi was very intermittent again. Did not occur to me initially and a lot of research got me my result. Had tinkered with TKIP and AES settings on modem as some people had luck with that but that was due to D-link routers as well known. uninstalled kaspersky mobile and wi-fi has worked perfectly ever since! There may be certain older kaspersky mobile software versions still compatible but dont know which one as yet.
Click to expand...
Click to collapse
Thanks for the info. I have removed Kaspersky meanwhile to see whether it helps. I've done so many changes at home to my WIFI router and a connected TP_Link AP(TL-WA901N).
Yesterday I could connect to my TL-WA901N upstairs for the first time (its been used for the TV only so far), Kaspersky removed, changes made in the TL-WA901N and TD-W8961ND and after fidgeting back and forth I cannot pinpoint what exactly made me connect via the AP. So I cannot blame Kaspersky but I will reinstall it later and if I get problems again then I know. I will update the results here. Network issues isn't my cup of tea.
Signal strength is the same, will test the bandwidth when I get home.
OK so I have now solved the problem. Bought a new router which supports 2.4GHz and 5GHz. It seems like the two frequencies complement each other in our apartment. Re-installed Kaspersky and I have not had any problems.
Can anyone confirm or not if the crap WiFi strength on nexus 10s is an acknowledged fact? I have seen some say it is, yet still see other comments praising the devices WiFi saying it is stronger than ipones etc.
This is my second N10, I sent the first back due to WiFi performance and I believed it to be defective. My second devices arrival has suggested otherwise as I have noticed no improvement.... Am I just really unlucky?
On my home network, every other device has ho WiFi issues, but my n10 struggles! It seems to sho a decent signal strength in the WiFilist in settings, but a low strength in the top right corner.... Can anyone advise? I get similar strength issues on other networks (public and at friends houses. SO frustrating not being able to perform one of the most basic functions on a £300+ device). Was hoping 4.3/4 upgrades would help- nothing.
Should I get a third nexus sent out? Is this down to poor quality components? Anyone having same issues?
Thanks!
Hard to generalize, but mine has been rock-solid (on 4.3; I'm holding off on "upgrading" to 4.4). Seems to give faster throughput than my N7
My N10 seems to be at par or a bit better than my better halfs Ipad. Taking both tablets and going for a walk out in back (acreage), in the outbuildings, and near fences, the signal strength and ability to connect to my router and see other routers was actually a touch better with the N10.
When first getting the N10, it did seem to drop the wifi signal, but replacing the el cheapo several year old router with a newer medium price router cured that issue.
The Google Nexus 10 as well as the Amazon Kindle HDX are two of the few devices that actually support MIMO (multiple input multiple output) wireless.
This typically allows for very solid and swift wireless performance.
I suspect that software updates may have had some impact on the Wireless functionality of the Nexus 10, but that is also in combination with some types of access points, so it varies to each customer.
Some places I get really terrible wireless, but at both my work and at home, it performs extremely well.
Hopefully a future KitKat patch will address the wireless more. I notice that new binaries are included in KitKat pertaining to both wireless and Bluetooth for the N10.
Hello, I just became an owner of a Nexus 10. when I first time connect to my BSNL Teracom wifi router it is not connected. it is always showing connecting or obtaining IP address...
It connected through my S3 Hotspot but not through teracom router
I wake up in the morning and just press again the connect button. Bingo...it is connected..!!! Not understand why it is behaving like this. I am not done any changes in routers settings also. Is it not connecting b'coz the routers frequency mismatch or anything else ?? After once I switch off and on the router the same problem happens
all my phones including a Samsung s3, tab neo and also my laptop all are switches automatically connected to the wifi router.
Please help.
thanks in advance.
Triggered from SCH-r530u using Tapatalk
Yup... Crap WiFi on my nexus 10 too. Just randomly disconnects or is so slow that its unusable for streaming movies... I own a ton of android devices and this is the only one that gives me problems. When I turn it on, I just hope it stays connected. Let's hope this post goes through lol
Sent from my Nexus 10 using Tapatalk
chefdave12118 said:
Yup... Crap WiFi on my nexus 10 too. Just randomly disconnects or is so slow that its unusable for streaming movies... I own a ton of android devices and this is the only one that gives me problems. When I turn it on, I just hope it stays connected. Let's hope this post goes through lol
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Mine pulls 40mb out of a n wifi connection.. the main connection is only 50 -55 on average. I'd say its the best performing wifi device I own.
I have owned my N10 for over a year. The WIFI signal strength is good, but I often get some lag issues, which ended up being my router. When I have issues, I now reset my modem and everything works again. I have read that some people only have a 2.4GHz modem, and they have received better luck by limiting WIFI to that frequency only.