Phone Totall Messed Up - Fascinate General

Ok I had my phone rooted and had voodoo on it. The phone was having issues downloading from the market, plus I couldnt turn the phone on unless i had it pluged in. So I tried to reset it using odin and the Stock-i500-VZW-Recovery.tar.md5. Now when I turn the phone on i get the android application has an uxpected error and I cant get past that. What do I do? Or how can I get my phone back to stock so I can re-root it.

Jeff5886 said:
Ok I had my phone rooted and had voodoo on it. The phone was having issues downloading from the market, plus I couldnt turn the phone on unless i had it pluged in. So I tried to reset it using odin and the Stock-i500-VZW-Recovery.tar.md5. Now when I turn the phone on i get the android application has an uxpected error and I cant get past that. What do I do? Or how can I get my phone back to stock so I can re-root it.
Click to expand...
Click to collapse
Jeff,
See this post for returning to stock http://forum.xda-developers.com/showthread.php?t=782204. I would do this as a last resort only.
Good Luck!

that is what got me to this problem. there are multiple files there what one do i use?

You apply them in the order they are listed.
1. Apply the "/system" file first
2. Apply the "kernel" file second
3. Apply thie "recovery" file third
This restores stock /system, the stock kernel, and the stock recovery. Pretty much brings you back to stock. Is that what you're trying to do?

I was having the same issues with USB cable looking like it was plugged in so I couldn't reboot unless it was plugged. I tried the voodoo uninstall and screwed up my data partition.
I ended up restoring the CWM_Kernel and Di01 Stock update which brought me back to stock with root and OTA update from Verizon BUT my Data partition is screwed and I have no internal app memory. Also, I have an Nandroid backup that I tried to install but that causes the FC issues that you mentioned. My guess is that my nandroid backup will work once I fix the data partition.
Later tonight, I'm going to try to put the stock MBR back onto the phone which I think you need to do as well.
However, it sounds like you didn't complete the whole recovery process and only applied one file. I'm an android newby so you can't take my advice to the bank but I think you need to restore all the files if you're going to flash with Odin per those instructions.
For me, I had CWM loaded so I just wiped the kernel and put back the DI01 ROM which put me back to stock albeit with some work to do to get my data partition back in shape. I hope this helped, for what it's worth.

Since you've already got the original.mbr copied and the stock.zip flashed...
Boot into CWM recovery and wide data/cache.
If you have a CWM backup of your phone in a rooted state, restore that backup through CWM.
Reboot, and go into "settings" if possible at this point, and factory reset.
This got me back from market failure/0.00/fc hell after utterly failing to heed the voodoo warnings and trying to revert to stock without undoing the lagfix.
You'll likely need to use the unsigned d101 apk if your backup/flash is dh12. The OTA update did not work for me at that point.

phispher said:
You apply them in the order they are listed.
1. Apply the "/system" file first
2. Apply the "kernel" file second
3. Apply thie "recovery" file third
This restores stock /system, the stock kernel, and the stock recovery. Pretty much brings you back to stock. Is that what you're trying to do?
Click to expand...
Click to collapse
My question is do i use the phone. pda or csc buttons for these files?

Ok in Odin use the PDA button for the /system
but what button do i use in odden to load the kernal.tar and recovery.tar
i loaded the pit, and installed all the files using the pda button one after the other. now my phone get no service and it still isnt wiped. what is going on? how do i get the phone back to out of the box condition.
also, now i cant do a factory wipe/reset, im getting the error message Can't mount /dev/block/mmcblk0p1

Gotta do the mbr fix from the 0.00 internal memory topic and then restore nandroid recovery.
Oh, and it is PDA for all three files, not just system.
Sent from my SCH-I500 using XDA App

i have the same problem n i havent had a phone for a
week...whats the fix??? did u fix urs??

trapstarr56 said:
i have the same problem n i havent had a phone for a
week...whats the fix??? did u fix urs??
Click to expand...
Click to collapse
Use the uninstaller form Here:
http://forum.xda-developers.com/showthread.php?t=804784
If that does not solve it, follow the steps here:
http://forum.xda-developers.com/showthread.php?t=782204
Read all pages of each topic completely prior to initiating *either* of them.

Related

0.00 internal memory, not Voodoo related

So I tried installing the new ASOP rom, and was getting a bunch of force closes. I tried using CWM to revert to a previous backup, unfortunately the force closes continued in the backup. So I want into ODIN to get back to stock. I loading the stock files, did a factory reset, and everything seemed to be fine. However when I went into the market to reinstall appbrain and get my programs back, I kept getting an Out of Space error. I checked the internal memory and sure enough it says 0.00.
I've never installed Voodoo on my phone, because I was trying to avoid issues just like this one. I read over the a similar thread on this issue, but that fix isn't working for me. I tried to reroot, but the SU apk's don't have any place to go, since the phone says there is 0 internal memory.
Luckily I can still use my phone, but every time it turns off it resets, and I can't load my apps back on. Anyone got any suggestions?
The fix should still work for you. I would suggest flashing stock rom, kernel, pit, and cwmrecovery thru odin. After that you can follow the instructions posted on how to completely remove voodoo. Main thing is you need to get the original mbr to your phone.
Well he said he never installed voodoo so he shouldn't have to go through the steps to remove something he never installed in the first place
Sent from my SCH-I500 using XDA App
ckochinsky125 said:
Well he said he never installed voodoo so he shouldn't have to go through the steps to remove something he never installed in the first place
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Hmm I read that part too, but if he follows adrynalyne instructions he should be fine. It is taking care of the same problem. Corrupted rfs. The op just achieved it in a different way. If that does not work for him then maybe some dev will be able to figure out another way to fix the problem.
I'd be curious to see mount results.
Run it from adb shell.
So the short story is I fixed my phone, from force close and zero memory hell.
I noticed when booting into recovery I was getting an error related to /dev/block/mmcblk0. I used the adb code to install the MBR file. Went in CWM and flashed the stock.zip kernel, restarted and got a ton of force closes. Went to the "How to escape the force close loop of hell" thread over at androidcentral, flashed the stock nandroid image, and someway, somehow the android gods took pity on my poor soul and my internal memory partition was restored.
I don't understand exactly how I fixed my phone, and I'm relatively new to this so I'm a little concerned. I'd like to learn from these mistakes, so does anyone understand what I did to fix my phone?
Sounds like it was the nandroid image that did it.
It is, effectively, the same issue the voodoo users have seen.
My "easy" fix was almost exactly the same as yours.
replace mbr, flash stock, revert to backup (which is basically what nandroid is).
I used my original CWM backup instead, and that worked for me. (I now have this stored on several drives/devices)
I also went back in to Root Explorer and nuked the "databases" folder in /dbdata and then wiped cache/data (CWM, then "settings"). Pretty much fixed it all for me.
Couldn't update to D101 for some reason after that, but the unsigned apk for that did the trick nicely. I suppose I'll have to retry the "odin to stock" bit if the 2.2 update fails the same way on me. Not looking forward to that one...

[Q] rebooting my phone does factory data reset every time

i had problems playing with dirrk oc kernals, so i ended up having to do the complete odin restore and managed to get the phone back to stock it seemed. but no setting will save on the phone, its like a factory reset every time i reboot the phone. can anyone help? when i did the odin restore i lost root, not sure if that means anything. anyone else having issues like this?
You have zero internal memory and the phone is not saving that you have run it.
Find the "FIXED 0.00 INTERNAL MEMORY" Topic in this forum.
Sent from my SCH-I500-Fascinate using XDA App
One of the steps I took with the zero memory issues that finally fixed my problem was to "factory data reset" in the privacy menu. I went from 0.0 to 1.0 gb memory.
BTW, I went through the 0.0 internal memory topic as well, but found that the above reset fixed it.
I wasn't patient enough when I did that to my phone on day 1. I just swapped it out at Best Buy, haha. Since it wasn't rooted at all, it just looked like corrupt firmware.
I will keep that in mind if I run into that issue again.
thank you for the quick responses. i tried the factory data reset already and still had zero memory. im not quite sure how to go about trying the solutions suggested in the other thread without having root. maybe im just misunderstanding what they are suggesting? or maybe there is a way i can root my phone now even with no memory???
Meh..
Takes less than 10 minutes, and gets you as close to stock as possible while still being rooted. It's not really monumental or earth-shattering.
I'll be the first to admit I was scared as hell the first time I did it.
Yeah..the first time. You think I actually *learned* from my mistake? Well, I did..I just keep making new, more interesting ones.
That *is* the point of Android, isn't it?
Steps:
Using adb, copy original.mbr (from that thread) to your phone.
flash stock.zip through CWM (you should still be able to get into recovery).
At this point, I diverged from the steps in the topic and restored my original stock+root backup as well)
Reboot, wipe data/cache, delete "databases" folder in /dbdata through root explorer.
(At this point I then did the nandroid revert to stock from the forums, updated, and had a nice functional phone again)
How far are you getting?
ok heres everything i have done and i still have no memory. i used the instructions to get back to stock with odin that came from the sticky on how to do everything. it included putting the original mbr on the phone and a few other things, im not so sure exactly what all it did but i followed those instructions to the t. then i had to use odin to get cwm back and i then used cwm to wipe and then tried to restore a backup. the backup restore didnt fix the memory so i wiped again and reflashed the superclean rom, still with no memory. thats where im at now, im too new to be comfortable doing much in adb without detailed instructions
ok i understand your instructions i think now, but i cant get the mbr on my phone using adb because i lost root. thats where i think im stuck
ok now ive got root back it seems but i cant do the adb thing it says to do for the original mbr. it just says "adb: not found" after i type in the cat /sdcard/original.mbr > /dev/block/mmcblk0 part
adb is part of the root zip you used earlier. Just go into the folder you ran start-root.bat from. Right-click on the folder/command-prompt here, should make it so you can use adb:
Adb shell
Such
Cat.....etc.
G/L.
Beamed from my Zinc 1.1 Fascinate (Dirrks D02 LV 1250) OC.

Recover or reinstall rom from clockwork?

My phone wont boot, so can i install a rom from clockworkrecovery?
agy1995 said:
My phone wont boot, so can i install a rom from clockworkrecovery?
Click to expand...
Click to collapse
Won't boot in what way? Can you get into fastboot and/or recovery? Since you're asking about CWM, I'm assuming you can get into it.
If you did a Nandroid backup (the main point of CWM for me), you could try just restoring it. If you didn't, I'd try a wipe all settings and then reboot. You should be able to get back to a virgin state on the main OS that way.
I can get into it, the problem is i erase all data on my phone. Thanks in advance!
???
Is there any way i can get my phone back up and running restoring everything from clockworkmod?
agy1995 said:
I can get into it, the problem is i erase all data on my phone. Thanks in advance!
Click to expand...
Click to collapse
agy1995 said:
Is there any way i can get my phone back up and running restoring everything from clockworkmod?
Click to expand...
Click to collapse
I'm still confused what your problem is.
You say the phone won't boot, but then you talk about erased data.
What exactly did you do to the phone? What was the last few things you did before you "broke" it?
What happens when you try to boot the phone (ie., it's powered off and you press the power button)? How far in the boot process does it go?
If your problem is that the phone boots but all your data is gone, there's no way to get back unless it auto-syncs down from Google, or you used a backup program like Titanium, or you made a nandroid backup in CWM.
If you made a nandroid, you should just be able to boot into CWM, select backup and restore and then restore your backup.
This is what happened....
I tried to replace my fonts in system that are supposed to work on a different phone. Then when i tried to boot up the phone was stuck on the silver google logo. Now, after that i went into clock work recovery and formated everything in the mounts and storage menu. After reinstalling the phones boot img, my phone freezes at the google logo. I can still get into the clockworkmod recovery. I never backed it up, but tried to use a nandroid someone posted online but i get a md5 mismatch.
Again, thank you for all your help!
agy1995 said:
I tried to replace my fonts in system that are supposed to work on a different phone. Then when i tried to boot up the phone was stuck on the silver google logo. Now, after that i went into clock work recovery and formated everything in the mounts and storage menu. After reinstalling the phones boot img, my phone freezes at the google logo. I can still get into the clockworkmod recovery. I never backed it up, but tried to use a nandroid someone posted online but i get a md5 mismatch.
Again, thank you for all your help!
Click to expand...
Click to collapse
The Modaco rom(http://forum.xda-developers.com/showthread.php?t=883985) should work just fine. Put it on the USB storage then in Clockwork go to "Install from zip."
i have a problem almost like that but my rom manager open but wont even backup current rom or anything, my titanium back doesn't backup either. it said i could not acquire root privileges, this app will not work, please vertify that you rom is rooted and includes busybox, i have busybox and it's rooted. i guess this happen when i update the google update last night from rom manager. what should i do
willyalmanzar said:
i have a problem almost like that but my rom manager open but wont even backup current rom or anything, my titanium back doesn't backup either. it said i could not acquire root privileges, this app will not work, please vertify that you rom is rooted and includes busybox, i have busybox and it's rooted. i guess this happen when i update the google update last night from rom manager. what should i do
Click to expand...
Click to collapse
Known issue. There is a thread in the Development section(http://forum.xda-developers.com/showthread.php?t=884499). The OTA "broke root."
Ouch. Now I understand.
In the future, always make a nandroid backup before messing around with things, easiest way to recover.
I see you're looking for help in this thread. Maybe they can help you.
You could also try flashing Doc's or Paul's roms also in that section.
rom
I tried that custom rom... still didnt work. Im going to give it another shot!
agy1995 said:
I tried that custom rom... still didnt work. Im going to give it another shot!
Click to expand...
Click to collapse
Did you wipe/factory reset before attempting to install? I realize that you're pretty much wiped at the moment, but always best to start with that.
unremarked said:
Did you wipe/factory reset before attempting to install? I realize that you're pretty much wiped at the moment, but always best to start with that.
Click to expand...
Click to collapse
I did that + i am using version 3.0 clockwork. Still frozen on the google screen.
agy1995 said:
I did that + i am using version 3.0 clockwork. Still frozen on the google screen.
Click to expand...
Click to collapse
You've tried another NAND backup, besides the one that MD5 mismatched, yar? Be careful not to rename it, as that can cause the mismatch.
Nope
Nope i didnt try any...
Do i have to rename it to update.zip?
Do i have to rename it to update.zip?
agy1995 said:
Do i have to rename it to update.zip?
Click to expand...
Click to collapse
The custom rom? No, you just go into recovery, wipe/factory reset, install from SD card, then navigate to where you put the .zip on the SD card.
I see you did try the 2.3.1 NAND backup in the development section. Try downloading it again on your PC, unzip it, then place the new folder on the clockworkmod's backup folder on your SD card. Again, do not rename it.
Im trying it now.
Im trying it now.
agy1995 said:
Im trying it now.
Click to expand...
Click to collapse
Be warned that if you do get the NAND to restore, you may lose clockwork recovery. I know I did when I first tried to use it.
Don't panic though, because you can fastboot flash clockwork back on from the bootloader.
I am pushing the files....
I am pushing the files....

recovering data from download mode?

A coworker of mine installed the OTA update Verizon was pushing down, after rebooting the phone was stuck at the Samsung logo.
We can get the phone into download mode, but recovery errors and none of the buttons respond. (Similar to this thread)
If need be I can take a screenshot or type out the error text he receives trying to go into recovery (stock)
A little more info i can give as is: his phone is stock rom, but I do believe he has it rooted.
I have flashed roms onto my phone (Captivate) so I am familiar with working with Odin, but the problem is that he has data on the phone he needs to recover.
ADB does not recognize the phone, but his computer does seem to detect it.
Does anyone have any advice on getting something to recognize the phone so we can pull data, or is there a rom/setting that would leave his data as is?
If you odin a rom or even flash a rom it doesnt touch any of the data on the SDcard. he will loose call history and sms history. Pictures and things will be left on the sdcard untouched.
This is the most complete and up to date guide for the fassy:
http://forum.xda-developers.com/showthread.php?t=1238070
Thanks for the heads up.
Just to be clear we are talking about the internal SD card right? Not the removable one.
He is apparently mostly concerned with losing his app data. As long as that will be safe I can have him up and running in a matter of minutes, especially with your link.
NO app data will be gone as well
What rom did he have or was it stock?
when i said the sd card i was referring to the removable one.
I figured that was the case
He is running the stock Froyo rom.
Would it be possible to use Odin (or some other tool) to push CWM onto the phone and maybe get it to mount from there?
He did say Odin recognizes a device when it's plugged in.
You may be past the point of no return. Since the phone is boot-looping and not actually booting up there may be no way to root the phone to flash CWM.
Odin is unfortunately a one-way street. Its designed to flash data ON to the phone, Not pull data off.
the phone does not have to be rooted to odin cwm....that being said, op try odining cwm2.5.1.x red and three finger into recovery, wipe cache & dalvik, then go to my guide section 1, use ccampos powerwashed ed05 froyo. That rom is close enough to what stock froyo is, so it might work! Or you can try geewiz froyo also, but one of those might get the phone back up and running without completely wiping everything.
just fyi once you odin a full rom all app data is gone. I have never attempted to pull app data from the mounting of the internal memory using cwm.
xwhofarted said:
just fyi once you odin a full rom all app data is gone. I have never attempted to pull app data from the mounting of the internal memory using cwm.
Click to expand...
Click to collapse
Thats why I suggested to try and flash a close to stock froyo rom in cwm without wiping data. odin will do a full wipe, so thats his only option that I am aware of.
Could he odin a recovery, make a back up, flash a new close to stock rom, advanced restore data? It would probable have alot of issues but may give him the opportunity to make a backup.
mentose457 said:
Could he odin a recovery, make a back up, flash a new close to stock rom, advanced restore data? It would probable have alot of issues but may give him the opportunity to make a backup.
Click to expand...
Click to collapse
my co-worker had something similar happen and this is what I had him do. It didn't fair too well but it was worth a shot.
Ended up using odin to push a stock verizon rom and started over. Then I MADE him put cwm on his device and make a backup immediately incase it were to happen again.

[Q] Soft-Brick Assistance

Note: I may not use terms correctly, I have spent the past hour reading threads similar to mine in order to (hopefully) use the correct terms to describe my predicament.
I was using TriForce ROM 3.0 and I wanted to mix things up a bit because it was too much like the stock ROM. I found Negalite S4 and tried my hand at that, with devastating consequences. I booted my phone into TWRP did a wipe and then proceeded to install the Negalite S4.zip onto my phone. It got stuck in a boot loop. After a good 30~ minutes of it continuously rebooting I turned it off and booted back into TWRP. However, now that my phone was wiped, it is not a recognized device by my computer any longer. Since I wiped the phone clean the .zip is no longer on my phone either. So, all I have now is a phone that can boot into recovery (TWRP); which is a soft-brick (correct me if I'm wrong).
I have read other threads and the xda community informs the user to use KIES or ODIN (I have used ODIN once before). However, try as hard as I can to understand their directions... I don't know what to do with ODIN.
My computer does not recognize my device at all. It will only boot into recovery otherwise it's stuck in an infinite boot loop. I am really scared that I have ruined such a valuable phone and so I am not thinking clearly - which is only adding to my "noobishness."
Can anyone please help me out in a way that I can understand? All help is much appreciated!
_retro said:
Note: I may not use terms correctly, I have spent the past hour reading threads similar to mine in order to (hopefully) use the correct terms to describe my predicament.
I was using TriForce ROM 3.0 and I wanted to mix things up a bit because it was too much like the stock ROM. I found Negalite S4 and tried my hand at that, with devastating consequences. I booted my phone into TWRP did a wipe and then proceeded to install the Negalite S4.zip onto my phone. It got stuck in a boot loop. After a good 30~ minutes of it continuously rebooting I turned it off and booted back into TWRP. However, now that my phone was wiped, it is not a recognized device by my computer any longer. Since I wiped the phone clean the .zip is no longer on my phone either. So, all I have now is a phone that can boot into recovery (TWRP); which is a soft-brick (correct me if I'm wrong).
I have read other threads and the xda community informs the user to use KIES or ODIN (I have used ODIN once before). However, try as hard as I can to understand their directions... I don't know what to do with ODIN.
My computer does not recognize my device at all. It will only boot into recovery otherwise it's stuck in an infinite boot loop. I am really scared that I have ruined such a valuable phone and so I am not thinking clearly - which is only adding to my "noobishness."
Can anyone please help me out in a way that I can understand? All help is much appreciated!
Click to expand...
Click to collapse
Okay, download and install Samsung drivers from the Internet if your phone isn't installing them on its own. Download MDL stock. Open ODIN. Put your phone in download mode. ODIN should see your phone. Flash stock MDL. Use goo manager to install TWRP again after your booted on stock MDL. Or use ODIN to do it. Redownload the custom ROM you want and then flash in TWRP. Also wiping the phones dalvik, cache system ect shouldn't have erased your SD card in the first place. You mist have accidentally checked the wipe SD card in advanced wipe options. You never need to do that. So next time also have a nandroid backup on your external SD. I keep one on internal as well in case external card goes bad cause sometimes that happens. And never select that wipe SD card option. Unless of course you really do want to wipe your SD card. Don't do that and keep a full backup of your last working ROM and you'll not have this problem again.
3ncrypt3d said:
Okay, download and install Samsung drivers from the Internet if your phone isn't installing them on its own. Download MDL stock. Open ODIN. Put your phone in download mode. ODIN should see your phone. Flash stock MDL. Use goo manager to install TWRP again after your booted on stock MDL. Or use ODIN to do it. Redownload the custom ROM you want and then flash in TWRP. Also wiping the phones dalvik, cache system ect shouldn't have erased your SD card in the first place. You mist have accidentally checked the wipe SD card in advanced wipe options. You never need to do that. So next time also have a nandroid backup on your external SD. I keep one on internal as well in case external card goes bad cause sometimes that happens. And never select that wipe SD card option. Unless of course you really do want to wipe your SD card. Don't do that and keep a full backup of your last working ROM and you'll not have this problem again.
Click to expand...
Click to collapse
Thank-you for the detailed response, I'll get started now! I did wipe the SD card, you're right. I'm so glad that you posted, thanks again.
If I need help I'll edit this post (no bumping within 24 hours). I'm hoping I have enough smarts to knock this out though. Again, thank you so much.
EDIT: Excuse my ignorance. I'm not sure what MDL stock is, I figured it was the default ROM - I have a nandroid of that. However, even after re-installing the samsung drivers, rebooting both my phone and computer - nothing happens. I don't know how to proceed from here. I can imagine I'm becoming a pain and do apologize.
_retro said:
Thank-you for the detailed response, I'll get started now! I did wipe the SD card, you're right. I'm so glad that you posted, thanks again.
If I need help I'll edit this post (no bumping within 24 hours). I'm hoping I have enough smarts to knock this out though. Again, thank you so much.
EDIT: Excuse my ignorance. I'm not sure what MDL stock is, I figured it was the default ROM - I have a nandroid of that. However, even after re-installing the samsung drivers, rebooting both my phone and computer - nothing happens. I don't know how to proceed from here. I can imagine I'm becoming a pain and do apologize.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2375523
The link above is the tar file for stock MF9. If you just use the link for the from the first post you just need to download the first file (not the kernel). Once downloaded you need to extraxt that zip and you will get a .tar.md5 file from it. Later open odin and make sure only auto reboot is checked. Click on the PDA slot and find the .tar.md5 file you downloaded click on it. Next put your phone into download mode and connect it to your computer. Wait for it to install drivers and you will see a yellow box with "com:[some number]" once you see that click start and from there let it do its thing and whoola you have your phone back to MF9 stock. Good luck!
Sent from my SPH-L720
ROMANTiC KiD said:
http://forum.xda-developers.com/showthread.php?t=2375523
The link above is the tar file for stock MF9. If you just use the link for the from the first post you just need to download the first file (not the kernel). Once downloaded you need to extraxt that zip and you will get a .tar.md5 file from it. Later open odin and make sure only auto reboot is checked. Click on the PDA slot and find the .tar.md5 file you downloaded click on it. Next put your phone into download mode and connect it to your computer. Wait for it to install drivers and you will see a yellow box with "com:[some number]" once you see that click start and from there let it do its thing and whoola you have your phone back to MF9 stock. Good luck!
Sent from my SPH-L720
Click to expand...
Click to collapse
Well, you did it! That post is solid, I understood every-bit! My phone (most likely) is downloading the firmware now. I don't know how long it will take to get off the "Downloading... Do not turn off target !!" screen, but I'll edit this post after letting it sit over night! Thank you both so much.
_retro said:
Well, you did it! That post is solid, I understood every-bit! My phone (most likely) is downloading the firmware now. I don't know how long it will take to get off the "Downloading... Do not turn off target !!" screen, but I'll edit this post after letting it sit over night! Thank you both so much.
Click to expand...
Click to collapse
Your welcome glad to help again, should take less than 10 mins. If its more than that just reboot your computer and repeat the steps from opening odin and finding your file. Another GS4 saved ;D
Sent from my SPH-L720
ROMANTiC KiD said:
Your welcome glad to help again, should take less than 10 mins. If its more than that just reboot your computer and repeat the steps from opening odin and finding your file. Another GS4 saved ;D
Sent from my SPH-L720
Click to expand...
Click to collapse
You were right, it was quite snappy. I cannot believe I was so panicked over this! My babies safe ... for now.
So how did Twrp wipe nor SD card? When by boot into recovery and immediately click on Wipe, it'll wipe everything Necessary except the internal and external memory. Did you click the option to choose what you want to wipe? Happens more than ya may think, cause I've done it myself lol. Good to hear it's back up, I still get freaked out by those occurrences
Sent from my SPH-L720 using Tapatalk 2
reverepats said:
So how did Twrp wipe nor SD card? When by boot into recovery and immediately click on Wipe, it'll wipe everything Necessary except the internal and external memory. Did you click the option to choose what you want to wipe? Happens more than ya may think, cause I've done it myself lol. Good to hear it's back up, I still get freaked out by those occurrences
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
It wasn't human error through TWRP, it was an error while flashing Negalite. It asks if you want to wipe everything, data, or nothing at all. Silly me thought let's wipe EVERYTHING! Heheh
3ncrypt3d said:
Okay, download and install Samsung drivers from the Internet if your phone isn't installing them on its own. Download MDL stock. Open ODIN. Put your phone in download mode. ODIN should see your phone. Flash stock MDL. Use goo manager to install TWRP again after your booted on stock MDL. Or use ODIN to do it. Redownload the custom ROM you want and then flash in TWRP. Also wiping the phones dalvik, cache system ect shouldn't have erased your SD card in the first place. You mist have accidentally checked the wipe SD card in advanced wipe options. You never need to do that. So next time also have a nandroid backup on your external SD. I keep one on internal as well in case external card goes bad cause sometimes that happens. And never select that wipe SD card option. Unless of course you really do want to wipe your SD card. Don't do that and keep a full backup of your last working ROM and you'll not have this problem again.
Click to expand...
Click to collapse
ODIN IS NOT RECOGNISING MY PHONE ...WHAT TO DO????:crying::crying::crying:
Ridddeathmetal said:
ODIN IS NOT RECOGNISING MY PHONE ...WHAT TO DO????:crying::crying::crying:
Click to expand...
Click to collapse
Reinstall drivers, use different USB ports, used different USB cables?
Sent from my SPH-L720 using xda app-developers app
romantic kid said:
reinstall drivers, use different usb ports, used different usb cables?
Sent from my sph-l720 using xda app-developers app
Click to expand...
Click to collapse
tried 4 ports...in different pc also but same result used 3 cables...but none recognising it.....drivers have been downloaded and reinstalled

Categories

Resources