Hi All,
Does anyone know of an App that can show how full the EXT2 or EXT3 partition of the SD card is?
I've read that there is a command that can be run from the terminal.
The reason I ask is that I have a lot of Apps and am wanting to see if it is worth increasing th size of the EXT3 partition.
Thanks.
jrc91 said:
Hi All,
Does anyone know of an App that can show how full the EXT2 or EXT3 partition of the SD card is?
I've read that there is a command that can be run from the terminal.
The reason I ask is that I have a lot of Apps and am wanting to see if it is worth increasing th size of the EXT3 partition.
Thanks.
Click to expand...
Click to collapse
Download Quick System Info from the market. There's a free and a pro version. I find the free version is good enough.
Fyi. The command is
df -h
Related
OK so far my problem has stumped everyone.
I have a rooted and hacked G1(HTC Dream) with a 16GB MicroSDHC that is divided into a 2GB Ext2 partition and a 14GB FAT32 partition. It worked fine for a while but then my G1 started to freeze up and reboot continuously so I took the card out and it stopped. I tried chkdsk in Vista and it hung in elevated .cmd prompt and it says i have bad sectors but it cannot fix in read only mode. I tried format in Vista and cmd and it tries, says the data is RAW and that it tried to convert to FAT but cluster size too big. Then when I try fs command for vfat in .cmd it still won't work. I used Paragon Partition Manager 9.0 PAID version to create partitions but now it hangs every time it tries to read the card and it won't format. Tried sdformatter and a low level formatter to and no good.
I have Terminal in my G1 but I am not familiar with Linux commands. I tried fdisk and it says the FAT32 is in read only mode. When I type busybox df -h it won't show the "/dev/block/mmcblk0p1" but it shows the Ext2 partition. But when I type the mount command it shows up as "rw". But i cannot access it at all to wipe the stupid card out.
HELP!!!!
1) can you mount the fat32 partition in you phone and can see the files?
2) did you tried as root *mount -o rw,remount -t vfat /sdcard* ?
Yes I tried it and it doesn't work. Is there anyway to flash the bootloader or the ramdisk?
assuming i have ramdisk.img boot.img and system.img on sdcard root and I want to copy to system files, anyone know the commands in Terminal Emulator?
Download the ubuntu live cd, burn it, then boot your computer with it. Plug your SD card into an external reader, NOT the g1. Run gparted and select the sd card from the list of drives and see if you can format or re-partition your card. If it wont let you then try selecting Device->Create Partition Table, to create a new partition table. If none of that works then either your card or card reader is dead.
Mike
Nevermind, it was a class 2 16GB card...i think I broke it...getting a class 6...
need help....
i have a 16gb class 6 and i need help or technically a walk through on how to partition this card....hence i am an extreme noob. i got into parted and it says i have a 16.1 gb so would that translate to 16001 mb? reason i ask is cause i dont know what to subtract 32mb from and such? also what is the optimal set up for a card this size? thanx in advance for any help that you guys may supply me...
TeCH NiNJa said:
i have a 16gb class 6 and i need help or technically a walk through on how to partition this card....hence i am an extreme noob. i got into parted and it says i have a 16.1 gb so would that translate to 16001 mb? reason i ask is cause i dont know what to subtract 32mb from and such? also what is the optimal set up for a card this size? thanx in advance for any help that you guys may supply me...
Click to expand...
Click to collapse
do it from phone terminal its much easier, if you need any more help pm me
i got guys thanks alot....i think ill try 42mb linux-swap to see if the hero rom will run smoother. to
JJbdoggg
Senior Member
thanx
i didnt partition my sd through parigon or anythin i used the apps2sd app and it partitioned for me..i want to put more space on my ext2 can some one tell me how to do this through apps2sd appilication without having to go through parigon paritioner..im currently use 500mg i want to use about 700 or 800
thanks greatly appericated
big_d093 said:
i didnt partition my sd through parigon or anythin i used the apps2sd app and it partitioned for me..i want to put more space on my ext2 can some one tell me how to do this through apps2sd appilication without having to go through parigon paritioner..im currently use 500mg i want to use about 700 or 800
thanks greatly appericated
Click to expand...
Click to collapse
The app probably cant resize a partition without destorying data.
Use GParted Live CD to do this.
Can anyone show me how to create an ext4 filesystem on the android. Since the phone is rooted and we hav a mod to enable apps2sd it would bt a great help as it would save a lot of memory on the phone.
rohillamanish said:
Can anyone show me how to create an ext4 filesystem on the android. Since the phone is rooted and we hav a mod to enable apps2sd it would bt a great help as it would save a lot of memory on the phone.
Click to expand...
Click to collapse
You can make Ext2 or Ext3 in Recovery (There work for A2SD). Unfortunately, ClockworkMod doesn't support Ext4 yet, but you can make an Ext4 partition in Ubuntu if you happen to be running it. Hope this helps
@HCDR.Jacob,
hey there, sorry i'm a noob but can you show me how to create atleast an ext3 in clockworkmod or ROM manager? i've been at it for sometime and i do think i've formatted my sd card with ext partition but when i install apps from market or appbrain it still uses the phone memory. any ideas where I go wrong?
Hi all, I've noticed lately that most of the new roms coming out require you to partition your sd card. a couple of questions;
Why?
is it perminent?
wich partition to add new files too?
can i still use stock sd card?
how big to make partition?
Thanks in advance
dca1970 said:
Hi all, I've noticed lately that most of the new roms coming out require you to partition your sd card. a couple of questions;
Why?
is it perminent?
wich partition to add new files too?
can i still use stock sd card?
how big to make partition?
Thanks in advance
Click to expand...
Click to collapse
Memory size on the phone is not adequate to handle the size of certain ROMs.
No its not permanent
Ext3 for apps
Yes
As big as you want, 2gigs is what's recommended and 32 mb swap
phatmanxxl said:
Memory size on the phone is not adequate to handle the size of certain ROMs.
No its not permanent
Ext3 for apps
Yes
As big as you want, 2gigs is what's recommended and 32 mb swap
Click to expand...
Click to collapse
Thanks! .
Upgrading from ext2-ext3
On a side note, I have been attempting to partition my SDcard with the 2G on my 16G C6 card. When I use AR1.8 everything goes quickly, but it will not upgrade from ext2-ext3 and says to use adb to do this (adb does not see the partition)...partition seems to be made when checking the card. On AR2.3 the partitioning goes on forever and have to do a battery pull to get it to stop. When I check the size with this version it also seems to have done the partition even with the endless process stated earlier. It however gives me the message 'opps, something went wrong' when trying to upgrade from ext2-3.
When checking from either method in TB, it shows an ap2sd partition of around 400mb and have yet to actually upgrade to ext3 from either recovery version.
Any ideas?
Use RA recovery to partition, it makes it simple.
What ROMs require this?
I guess I've been in the AOSP world for too long...
Just the virus gingersense and the virus kingdom that I know of. The virus kindom does not require it but you wont be left if much room for apps.
phatmanxxl said:
Just the virus gingersense and the virus kingdom that I know of. The virus kindom does not require it but you wont be left if much room for apps.
Click to expand...
Click to collapse
Why not just http://forum.xda-developers.com/showthread.php?t=855424 ?
Better performance on NAND than SD-EXT.
phatmanxxl said:
Use RA recovery to partition, it makes it simple.
Click to expand...
Click to collapse
Sorry, AR was my intention of RA. Have used both the initial version 1.8 (my first anyway) and 2.3 with no success.
Have been attempting to do it within ADB and keep getting this message when attempting to make the ext2 partition:
Input/Output error during write on /dev/block/mmcblk0
This is the process I'm using:
within adb shell
# parted /dev/block/mmcblk0
(parted) mkpartfs primary fat32 0 13991
(parted) mkpartfs primary ext2 13991 16039
this is where I get the error mentioned above and can not continue to the swap.
(parted) mkpartfs primary linux-swap 16039 16071
HOWEVER....
If I use mkpart primary ext2 13991 16039 it takes, but does not show that it is an ext2 in the files system under the partition information.
Does this even make sense..lol
EDIT:
Never mind..erased my edit until I really screw up my card...now it won't mount...back to the drawing board
Gave up after reading about Transcend cards and just partitioned to the single 16G. Going to get a different card/mfg and give it a go. At least I learned a bit more about ADB today...so not a total loss.
OK..after looking through many options, may have my issue as to why RA won't perform the partition and I can't do it through ADB.....MY CARD. Apparantly there have been issues with Transcend and making an ext partition. Guess it's time to go C10 and get a new one.
Anyway...found this thread and thought it might help?
http://forum.xda-developers.com/showthread.php?t=534714
Got a new C10 card today from a different mfg and that fixed the problem!
I use gpart on ny ubuntu OS. It is NVIDIA to keep a Linux OS around guys. I can do the wholebpartitioning without erasing any files or data. soo I'm good to go. Also its fast as well.
Sent from my PC36100 using XDA App
hi guys i have been searching the forums for tutorial on how to properly partition your sd card and your phone to use a swap partition for swapper. i heard it allows speed up performance for the phone while using some apps. can anyone pls help me with this. i just want a better performing GT540. thanks in advance
I'd be interested in a tutorial for this as well.
Thanks
Most opperating systems have a built in manager for it, including windows. Look on YouTube, that's how I did mine.
Or use clockworkmod.
lukemovement1 said:
Most opperating systems have a built in manager for it, including windows. Look on YouTube, that's how I did mine.
Or use clockworkmod.
Click to expand...
Click to collapse
On windows you can create partitions but swap belongs to linux so unless you use a ubuntu live CD or a machine with ubuntu...
Veronica
lavero.burgos said:
On windows you can create partitions but swap belongs to linux so unless you use a ubuntu live CD or a machine with ubuntu...
Veronica
Click to expand...
Click to collapse
A ext2 partitions is the same on all operating system
Clockworkmod will also partition you sdcard
So i just create an ext2 partition on my sd? Then what's next?
Sent from my GT540 using XDA Premium App
Back ur memory card up first. Depending what size memory card you have depends on the size of the partition
The most you will need is 2gb, I would only us 500mb.(2gb sdcard)
You need to have a fat32 partition for your normal data and the ext2 for the swap file. Then just put it back in you phone.
BTW I lost my last memory card trying to unpartition it. So if you only want 1 extra paelrtition use clockworkmod.
NEXT STEP
lukemovement1 said:
back ur memory card up first. Depending what size memory card you have depends on the size of the partition
the most you will need is 2gb, i would only us 500mb.(2gb sdcard)
you need to have a fat32 partition for your normal data and the ext2 for the swap file. Then just put it back in you phone.
Btw i lost my last memory card trying to unpartition it. So if you only want 1 extra paelrtition use clockworkmod.
Click to expand...
Click to collapse
after this, how can i configure swapper 2??
Thanks in advance
I think you tick a box. Download swapper2 from the market place, one of them has more options than the other