First off, I'd like to thank Sleuth255 for SDAutoRun, and to mousio for his AutoRun tool which provided the inspiration for this project.
SDConfigGen is a command line tool for the PC which inspects a collection of files to be installed, then produces an SDConfig.txt and other associated scripts and provisioning files to allow SDAutoRun to automatically install them.
It differs from mousio's solution in that rather than having SDAutoRun call a MortScript to do all the work, this tool creates an SDConfig.txt to do the majority, only calling scripts for specific functionality when required. Scripts (and therefore MortScript) may not even be required, if nothing being installed needs automation.
Installation
Unzipping the contents of the archive will produce this folder structure:
\
Storage Card\SDConfig\Cabs\
Files\
Scripts\
Settings\
Sys\First things first - to use any of the script-based functionality a copy of the MortScript installation cab file must be placed within the Sys folder. Download MortScript-4.11b7.zip (or newer version) from http://www.sto-helit.de, then extract \cab\MortScript-4.11b7-PPC.cab from it.
Usage
If the name of the Storage Card will be different on your target device, then rename that folder to whatever it will be. Otherwise, just leave it as it is.
Within the sub-folders of SDConfig, add the files you want to be installed.
Cabs:
Any .cab files in this folder will be installed. If the installation of a .cab file requires user interaction (to confirm a license window, for example), then create a .mscr script file of the same name containing instructions to be executed while the cab file is being installed.
For example, if you need to install a cab file: "eWallet-PocketPC-Install.cab",
create a file called "eWallet-PocketPC-Install.mscr" too. This file contains
MortScript to be run while the cab installer is being run, for example:
Code:
windowTitle = "Software License Agreement"
WaitFor(windowTitle, 60)
SendLeftSoft(windowTitle)
Note that you don't need to worry about actually installing the cab, or waiting for installation to finish - just write the automation code itself.
The SDAutoRun UI will be hidden while an interactive cab is being installed like this, and a MortScript status window shown instead. The device will be responsive to user input, so if any non-automatable interaction is required, that can be done manually.
Files:
After the cab files have been installed, all files in this folder will be copied directly to the root folder. To copy files to sub-folders, place them in sub-folders of this folder. For example, to copy files to the Windows folder, create a Windows folder here and place the files within it.
Standard (English) folder names will automatically be replaced by variables, so files in the "Files\Program Files" folder here will be copied to %CE1% folder by SDAutoRun.
The file copy operation is actually performed by generating a CopyFiles.xml provisioning file in the Sys folder, and it is this that goes in the SDConfig.txt file. This method was chosen as it avoids the path length limit of copying directly in SDConfig.txt, and allows for the %CEn% variable subsitution scheme.
Settings:
After the files have been copied, any settings in this folder will be applied. Settings may either be .xml provisioning files (which are added directly to SDConfig.txt), or registry data in .reg, .rgu or .cereg files. Registry data files will be automatically converted to xml provisioning files within the Sys folder, which are then added to SDConfig.txt.
Scripts:
After the settings have been applied, any .mscr scripts within this folder will be executed. SDConfigGen will generate instructions in SDConfig.txt to automatically handle copying them to the \Temp folder and renaming them to replace spaces by underscores before execution if required.
Note that the device will not be interactive at this point, so don't write scripts that require user interaction.
Sys:
Apart from placing a copy of MortScript-4.11b7-PPC.cab in here, you shouldn't touch the contents of this folder; they will be automatically cleaned out and generated by the SDConfigGen tool.
Notes
I've provided RegToXml as a standalone .exe file so that registry data files can be manually converted to .xml provisioning files, if required. This is not generally necessary, though, as it will occur automatically as part of the SDConfigGen process.
Due to limitations of SDAutoRun, during installation some files need to be copied to the \Temp folder on the device before execution. A TempCleanup.xml provisioning file is generated in the Sys folder by SDConfigGen which is the last thing executed by SDConfig.txt. It should remove any temporary files that were placed in the \Temp folder, but will not remove the folder itself, or any other files within it.
SDAutoRun also requires that SDConfig.txt be ASCII, which means that if any files contain characters outside that range (such as accented characters), they can not be directly referenced. SDConfigGen will automatically detect this, and generate provisioning XML files to transparently rename the files before processing them, then back again afterwards.
The last statement in the SDConfig.txt is the RST: Reset statment, to reset the device.
The only part of the file structure that can be changed is the name of the "Storage Card" folder - the other folders cannot be renamed or moved. By default, when the SDConfigGen tool is run, it works with the first sub folder under the folder the .exe file is placed. To override this behaviour, pass the folder path to SDConfigGen.exe as a command line argument.
Cabs, settings and scripts are executed in alphabetical order, grouped by subfolder. Subfolders will be executed first, so for example the contents of Cabs\Prerequisites\ would be installed before the files directly in Cabs\ (but after files in Cabs\A\). All interactive cabs are executed first, followed by non-interactive ones.
All generated files (except SDConfig.txt) are in Unicode UTF-16 encoding.
To have SDConfigGen create a log file of the generation process, use the SDConfigGenWithLog.bat file included in the archive. It will create a results.log file containing the messages that would normally be output to the console.
This is still an early version, so there will probably be bugs with it. I've used it successfully for setting up my own device several times now, but I can't make any guarantees. Please do post any bug reports or suggestions here though!
Alex
Updates
0.6:
All output files are now in UTF-16 encoding, with the exception of SDConfig.txt, which is in ASCII.
If files referenced by SDConfig.txt have names containing non-ASCII characters, provisioning files to automatically rename them before they are accessed, and to restore them afterwards will be generated.
Subfolders are now supported in the Cabs, Settings and Scripts folders. Files within subfolders will be processed first, in alphabetical order of subfolder name.
File folder variable substition made case insensitive
Added SDConfigGenWithLog.bat file for easy logging of output to a log file
0.5.1:
Removed .svn files from the file structure (oops!)
0.5:
Made warning message on skipping registry files less confusing
RegToXml: Now supports empty values for String, MultiString and Binary values
RegToXml: Made ,ore robust to invalid data - if a value contains invalid data, only that value is skipped.
RegToXml: The line number is now reported with any error or warning message.
RegToXml: Whitespace allowed to surround the = in value lines.
0.4:
RegToXml: Fixed nesting bug with registry key deletion conversion
RegToXml: Now supports comments (lines starting with ; )
0.3:
RegToXml now assumes that registry files without Unicode BOM's are encoded in the system default ANSI codepage, rather than UTF-8 (this means that if your registry file is UTF-8, it must contain a Byte Order Mark to be read correctly)
0.2:
Files are now installed in alphabetical order by file name (within their own group). For example, first interactive cabs A-Z, then non-interactive cabs A-Z. This allows control over installing cabs that require others to be installed before or after them.
.NET Framework (required)
Lookin Mighty Fine Siuer.
Not in the Testing Time yet.
But does the scripts folder eventually combine the scripts into one?
(lazy Bum At Work, Not Able to test it)
No, the scripts in the scripts folder are not combined into a single script, they are all executed separately. Would there be some benefit to trying to combine them into a single script before execution?
AlexVallat said:
No, the scripts in the scripts folder are not combined into a single script, they are all executed separately. Would there be some benefit to trying to combine them into a single script before execution?
Click to expand...
Click to collapse
No, you are absolutely right there is now good reason for it.
It's better to have them seprated, makes finding **** Ups easier.
Don't know what i was thinking or why..
AlexVallat,
Thanks for your job, you soft is amazingly simple which is a great pro compared to SASHIMI for instance.
So yhis afternoon I started to put all my files in the appropriate folders and when I launch SDConfigGen with the folder path I don't get in the config.txt file \Storage Card\ before the files to execute but the path I gave as parameter. I think transforming the path given into \Storage Card\ could help.
One other point, as a poor French guy your RegToXml converter does not handle all the French extended character set such as é, à, ... Could you make it support this characters.
Anyway for now it is fully usable but requires SDConfig.txt file edition before launching the whole process. Tomorrow it will be hands-on time as I plan to upgrade my Polaris ROM so more news to come regarding SDCofingGen usage.
The_Steph
The_Steph said:
AlexVallat,
Thanks for your job, you soft is amazingly simple which is a great pro compared to SASHIMI for instance.
So yhis afternoon I started to put all my files in the appropriate folders and when I launch SDConfigGen with the folder path I don't get in the config.txt file \Storage Card\ before the files to execute but the path I gave as parameter. I think transforming the path given into \Storage Card\ could help.
One other point, as a poor French guy your RegToXml converter does not handle all the French extended character set such as é, à, ... Could you make it support this characters.
Anyway for now it is fully usable but requires SDConfig.txt file edition before launching the whole process. Tomorrow it will be hands-on time as I plan to upgrade my Polaris ROM so more news to come regarding SDCofingGen usage.
The_Steph
Click to expand...
Click to collapse
Hm my pall had the same thing but changing to Unicode seemed to solve his XML issue. NOt sure if this is the same but worth the try.
Great work alex!
Question:
Anyway to verify the syntax of the provisioning XML files?
Any tools out there that can create these files or verify them? I think a tool like this would be great.
NEVERMIND! I just saw your reply in the reg2xml converter thread! THANKS!
The_Steph: Thanks for your comments!
The idea with the path is that the name of the folder is used to control the name of the Storage Card on the device. So if you name your folder Storage Card, that's what goes in the SDConfig.txt. If, on your device, it has a different name (due to language changes, or whatever), then you need to rename the folder appropriately.
Thanks for the bug report about accented characters in RegToXml. I will fix that and post an updated version soon.
gtxaspec: I could verify that the files were valid XML, but the more useful check that they contain valid provisioning instructions is beyond the scope of this project. Not least because the documentation describing what are valid instructions is confusing and can be inaccurate. With anything other than the file and registry providers, it usually ends up being a case of trial and error. With the file and registry providers, using the auto-generation capabilities of SDConfigGen will avoid most surprises.
Alex
Version 0.3 released
I've just updated the first post to release version 0.3. This should address the accented characters issue raised by The_Steph, however it does mean that if your registry file is UTF-8 encoded, it must include Byte Order Marks to indicate this. Otherwise, it will be assumed to be encoded in the system default code page.
I've also added a feature that files are now installed in alphabetical order (within each group). If you need to make sure that certain cabs are installed before others, this can now be done by renaming them, usually by including a numeric prefix.
Alex
reg2xml bugs
Hi Alex,
Converting everything to xml and using standard provisioning is an interesting approach!
Only obviously reg2xml has got some problems still with .reg files containing certain characters:
I've attached you a sample file which is not converted correctly at three points, each with a different error cause.
- Comments (Lines beginning with ";") in the .reg files are sometimes (not in every case, could not see what the trigger is) leading to an aborted conversion.
- Some characters like the arrow character (ASCII 27/1BHex) are also a problem.
Maybe the attached file helps in finding the bug.
BTW: Do you also have a tool that is converting just the other way around: From XML to reg indstead of from reg to XML?
Sometimes I need to have a .reg file instead of an .XML. And importing the XML and then trying to find all registry entries to export it back to a .reg can be a very tedious thing when the imports are not all together in one registry branch.
Thanks!
Thanks for the bug report, asango. Yes, I forgot about comments, I'll fix that and release an update soon. I'm looking into what the best way to handle control characters like 0x1B is (which is 'Escape', according to the ASCII chart I'm looking at). Obviously crashing is not an acceptable behaviour, so I'll have some sort of fix for it.
I don't have a XmlToReg tool, but it sounds like a good idea - I'll probably write one over the weekend.
Alex
Great, looking forward to that, thank you!
Version 0.4 released
The first post has been updated to version 0.4. RegToXml has been updated to add support for comments in .reg files.
Unfortunately there appears to be no way to include control characters in an XML file. If the character itself, or even the character entity (like , then the file is regarded as malformed and not accepted. I have therefore not been able to do anything to fix this (sorry asango!).
If anyone knows of a way that a provisioning file could be used to set a registry string value containing these characters, please let me know.
On a more positive note, the requested XmlToReg tool is up - I've given it its own thread here: XmlToReg.
Alex
Yes, the comments are now handled corectly, perfect!
Some other thing is still an issue:
test.reg: Converting...
test.reg: Conversion failed. (Unexpected value format: dword) Skipping.
In this case the output file is not generated at all, seems that not only the value is skipped but this causes the whole file not being written.
This leads to another suggestion: Would it be possible to indicate the line number where a problem happened?
This would make it much easier to find the problem.
And regarding the non handled escape characters:
This also leads to aborting. Would it also be possible to just skip them and issue a warning but go on with the conversion and with writing the outout file for the rest of the entries?
Now that is odd. "dword" is a perfectly valid value format, it shouldn't have produced that error. Any chance you could send me the .reg file that produced it?
Line numbers should be do-able, I'll add that to the next version.
The "skipping" message there referred to the "test.reg" at the start of the message, not to the dword value. I agree it looks misleading as it is currently worded though, I'll improve that.
About recovering from errors and skipping only invalid values rather than the whole file - this will be quite tricky. By the time I am notified of invalid characters by the XmlWriter, it has already given up in a sulk and can't be persuaded to continue writing any further. I'll need to do some sort of pre-vetting before passing data on to it. If I come up with any good ideas on how to do this, I'll include it in the next version.
Alex
asango, here's a candidate RegToXml.0.5.0 - could you check if it is still reporting the "Unexpected value format: dword" error with your file? It now reports line numbers, which might help track down the problem. It should also be able to recover from an invalid value and skip just that value, although I'm not sure how well that is working yet.
Alex
Hi Alex,
Great, the line numbers are making things much easier and this way I even found the reason for this error very easily:
Here's the point where it is failing:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"NITZEnable"= dword:00000001
...with this error message:
test.reg: Converting...
[Line 194] Error: Invalid value (Unexpected value format: dword)
Skipping: HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL\NITZEnable
Done.
As soon as I'm deleting the blank between the "=" and "dword" everything is ok.
Maybe you can allow blanks after the "=" in general?
This would solve this issue definitely
And yes, by the way the xml file is now generated despite of this error, very good!
Asango
Hmm... I'm not sure whitespace is supposed to be allowed around the = sign. It doesn't make anything ambiguous though, so there's no good reason not to relax the matching. Try this 0.5.1 which allows whitespace around the = sign, hopefully that should now parse your file correctly.
Alex
Yes, now I can see no other issues with the RegToXml tool, good work!
Also the whole cold boot import is ok with one exception:
Only the CopyFiles.xml which is generated by the SDConfigGen.exe is not copying all the files from the "Files" diectory during its execution.
Tried to import that xml manually with the xml option of Taskmgr and also got an error, but since the error is *very* uninformative and not showing the line number and my CopyFiles.xml is rather big I could not find the problem.
Could it be that the reason for the error is that if a file is already existing or read only that this will stop the rest of the import?
asango said:
Yes, now I can see no other issues with the Only the CopyFiles.xml which is generated by the SDConfigGen.exe is not copying all the files from the "Files" diectory during its execution.
Tried to import that xml manually with the xml option of Taskmgr and also got an error, but since the error is *very* uninformative and not showing the line number and my CopyFiles.xml is rather big I could not find the problem.
Click to expand...
Click to collapse
Second hands-on day with SDConfigGen and I have the same issue with v0.4. CopyFiles.xml is not executed at all. Probably a syntax error issue as stated by asango (I've done the same tests as him).
The_Steph
When i add STK service and STK UIPPC package, a shortcut is automatically placed in root my my start menu. The name of shortcut is based on service provider (in my case, its EasyAccess.lnk). Is there any way to define where the shortcut will be placed? I.e.: "\Windows\Start Menu\Programs\Tools"
I tried provxml, it didnt work. I guess the shortcut is created on first boot and provxml is executed prior to the shortcut being created.
p/s: I do not want to resolve to mortscript yet. (im keeping mortscript as last option)
Thanks in advance!
tidus18 said:
When i add STK service and STK UIPPC package, a shortcut is automatically placed in root my my start menu. The name of shortcut is based on service provider (in my case, its EasyAccess.lnk). Is there any way to define where the shortcut will be placed? I.e.: "\Windows\Start Menu\Programs\Tools"
I tried provxml, it didnt work. I guess the shortcut is created on first boot and provxml is executed prior to the shortcut being created.
p/s: I do not want to resolve to mortscript yet. (im keeping mortscript as last option)
Thanks in advance!
Click to expand...
Click to collapse
Use a program like agent ransack to search your entire kitchen for the text "EasyAccess.lnk". There must be a file you are missing somewhere. This will find all occurrences of the shortcut in provxmls, app.dats, etc.
http://www.mythicsoft.com/page.aspx?type=agentransack&page=home
hardcoded path
mwalt2 said:
Use a program like agent ransack to search your entire kitchen for the text "EasyAccess.lnk". There must be a file you are missing somewhere. This will find all occurrences of the shortcut in provxmls, app.dats, etc.
http://www.mythicsoft.com/page.aspx?type=agentransack&page=home
Click to expand...
Click to collapse
I have searched my entire kitchen and the paths are not in app nor provxml I missed. But as I initially suspected, the path is hard coded into STK_Service.dll. I found few paths as unicode, and I did try to insert the desired folder "\Tools" to the path. Unfortunately, Im a newbie when it comes to hexediting...my edited dll resulted in non-booting room.... Will try again and post update or any hex wiz can help me out please? That would be very much appreciated.
My target is to drop the new shortcut into "\Windows\Start Menu\Programs\Tools"
I also noticed the icon registry entry for the shortcut is also defined in the dll.
My steps was: Recmod the module - edited the paths - recmod and replace the original module in ext package. The original module is attached.
- What is baksmali/smali?
smali/baksmali is an assembler/disassembler for the dex format used by dalvik, Android's Java VM implementation. The syntax is loosely based on Jasmin's/dedexer's syntax, and supports the full functionality of the dex format (annotations, debug info, line info, etc.)
The names "smali" and "baksmali" are equivalents of "assembler" and "disassembler" respectively.
- Author of the tool
JesusFreke
- Why we need it?
Android apk and jar files will include java classes to execute certain functionality. With baksmali, you will be able to disassemble the java classes into editable form (smalis) so you can do your editing and modding involving java script. Once you done changing, you need to assemble all classes to a readable form for android, i.e, classes.dex and here comes the role of assembler (Smali).
Since we have apk manager, do we still need this tool?
Yes and No!!! Because some apk managers even if they do support jar files but once they decompile smalis, they will remove some lines (.line, .parameter, ...etc) which are in my opinion are useful to locate some codes. So the choice is yours.
- What does this tool do?
Simply it baksmali classes.dex of android apk and jar files into editable form (smalis) to do your changes; then assemble it back (smali).
- Will it affect apk and jar original signature?
No, it will preserve original signature.
- Got problem?
During assembling (smali), you may got error message. You can check log file to locate what is wrong that make the manager stop assembling the file or post the log file for developers to look into it.
- What are the steps to work with this tool?
Run Baksmali_tool.bat file, this will create all needed folders in the first run.
1. Put android apk or jar file in "put-file-here" folder. If Current-file status is set to None, then either you need to set a file in option #3 or you forget putting valid file in "put-file-here" folder.
2. When Current-file status is set to your file, you can disassemble its classes.dex by option #1.
3. Classout folder with name of file project will be created in "project" folder; make your changes there.
4. If finished your changes, assemble classout folder by option #2.
5. If everything is OK, a new file will be created in "finish" folder with tag (Modded_) in its name, push it to your device by option #3 if it was system apk or jar; and if it was non system apk file, install it by option #4.
- Latest stable version
Latest stable baksmali/smali version: 2.2.2 (30.10.2017)
baksmali v. 2.2.2 - Download (bitbucket.org)
smali v. 2.2.2 - Download (bitbucket.org)
baksmali/smaly previous versions - Download (bitbucket.org)
- Latest beta version
Latest beta baksmali/smali version:
- Changelog
baksmali/smali wiki and changelog (github)
- Where can I download latest source code?
You can visit
baksmali/smali source page (github)
and you can download the latest smali and baksmali code versions.
- Special Thanks to XDA Portal Team
Special thanks to XDA Portal Team for featuring this utility
XDA Portal Team
..
hi m8,
thanks for this nice tool
will try it next time I make a new theme
sent from my G-Note
great work majd keep it up
no credit to the author of smali/baksmali? :/
iBotPeaches said:
no credit to the author of smali/baksmali? :/
Click to expand...
Click to collapse
I think the authers are these guys ([email protected], [email protected], JesusFr.. @gmail.com) from project page.. aren't they??? if so I will update OP
majdinj said:
I think the authers are these guys ([email protected], [email protected], JesusFr.. @gmail.com) from project page.. aren't they??? if so I will update OP
Click to expand...
Click to collapse
Yes, thats the same person. I'd just put JesusFreke, as thats his username.
Version 1.1 is online
version 1.2 is online
some bugs fixed
Grate dev, Great tool...tnx majdini:fingers-crossed:
What a great idea to simplify life ^^.
Thanks majdinj.
majdinj said:
Backsmali / Smali Manager
What is Backsmali / Smali?
smali/baksmali is an assembler/disassembler for the dex format used by dalvik, Android's Java VM implementation. The syntax is loosely based on Jasmin's/dedexer's syntax, and supports the full functionality of the dex format (annotations, debug info, line info, etc.)
The names "smali" and "baksmali" are equivalents of "assembler" and "disassembler" respectively.
Why we need it?
Android apk and jar files will include java classes to execute certain functionality. With backsmali, you will be able to disassemble the java classes into editable form (smalis) so you can do your editing and modding involving java script. Once you done changing, you need to assemble all classes to a readable form for android, i.e, classes.dex and here comes the role of assembler (Smali).
Since we have apk manager, do we still need this tool?
Yes and No!!! Because some apk managers even if they do support jar files but once they decompile smalis, they will remove some lines (.line, .parameter, ...etc) which are in my opinion are useful to locate some codes. So the choice is yours.
What does this tool do?
Simply it backsmali classes.dex of android apk and jar files into editable form (smalis) to do your changes; then assemble it back (smali).
Will it affect apk and jar original signature?
No, it will preserve original signature.
Got problem?
During assembling (smali), you may got error message. You can check log file to locate what is wrong that make the manager stop assembling the file or post the log file for developers to look into it.
What are the steps to work with this manager?
Run Backsmali_tool.bat file, this will create all needed folders in the first run..
1. Put android apk or jar file in "put-file-here" folder. If Current-file status is set to None, then either you need to set a file in option #3 or you forget putting valid file in "put-file-here" folder.
2. When Current-file status is set to your file, you can disassemble its classes.dex by option #1.
3. Classout folder with name of file project will be created in "project" folder; make your changes there.
4. If finished your changes, assemble classout folder by option #2.
5. If everything is OK, a new file will be created in "finish" folder with tag (Modded_) in its name, just rename it to its original name and push it to your device; don't forget to fix permissions as well.
If backsmali and smali code are outdated, what to do?
Just visit codes owner page, and download the latest smali and backsmali code versions and put them in "tools" folder (make sure to rename them to baksmali and smali without version number)
Future development?
Feel free to report any bugs or suggestion to improve upcoming releases :good:
Download
- Backsmali-Manager_v1.2 @ 11/June/2013 (The most recent one)
- Backsmali-Manager_v1.1 @ 7/June/2013 (old)
- Backsmali-Manager_v1 @ 6/June/2013 (old)
Change-log:
@ 11/June/2013 (v1.2):
- Fixed bug of file path in Read Log option.
- Fixed number 10 file that was not shown in Set Current-file option.
@ 7/June/2013 (v1.1):
- Deleting the folder and file in project and finish folder of same project name before backsmali or smali (no more overlapping :fingers-crossed.
- Added Read log file functionality in the main menu.
- Ability to open classout folder after backsmali.
- Ability to open finish folder after smali.
- Ability to renamed finished modded file to its original name.
- Neat smali and compression processing (i.e, hidden processing ).
- Fixed set Current-file option to visualize only apk and jar files.
@ 6/June/2013 (v1.0):
- First release of Backsmali / smali manager
Click to expand...
Click to collapse
i don't know how to start editing this smali file
badagila said:
i don't know how to start editing this smali file
Click to expand...
Click to collapse
Editing smali means to modify your jar or apk file to do certain new function, check the second thread in my signature in OP... you will find a lot editing tutorials of smalis of some android apps :laugh:
majdinj said:
Editing smali means to modify your jar or apk file to do certain new function, check the second thread in my signature in OP... you will find a lot editing tutorials of smalis of some android apps :laugh:
Click to expand...
Click to collapse
ok dude thanks
Hi, your work is featured here: http://ajqi.com/baksmali-smali-manager-windows-tool/
Keep it up!
VERY NICE!
Good Work..
I dont know much about smali backsmali.. but one confusion..
Is this tool also applicable if the files (apks or jars) we want to modify are odexed?
OJ said:
Good Work..
I dont know much about smali backsmali.. but one confusion..
Is this tool also applicable if the files (apks or jars) we want to modify are odexed?
Click to expand...
Click to collapse
No, actually classes.dex are made from the odex files.
If files are odexed, then there will be no classes.dex in apks or jar files. That's why it won't be applicable then
Version 1.3 is online
Change log:
- Added adb push finished file to device system partition (for system files).
- Ability to choose whether to reboot device after pushing files to device.
- Added adb install finished apk (for non-system files).
- Adjustable Java heap memory size.
- Adjustable finished file compression level.
- Updated Smali and Backsmali codes (date 15/6/2013).
@ 23/June/2013 (v1.4):
- Added Pull apk or jar From Android Device to the main menu.
- Added zipaligning process during Smali (better RAM management).
- Fixed apk installing process (added signing process step for installing apk process).
- Added direct link to this xda page in update option.
- More script polishing...
@ 29/June/2013 (v1.5-FINAL):
- Fixed adb remount bug for some ROMs in push option.
- Baksmali argument is updated; now you can choose whether to baksmali with x argument (retain .line, .parameter, .prologue, and .local) or b argument (remove .line, .parameter, .prologue, and .local).
Hi,
i've XP&Backsmali / Smali Manager v1.5 and i want baksmali framework.jar but i got error message(attachment)
I think wrong is slash (should be a backslash)
the same error is after i select 1(baksmali*)and then x and Y or
--------------------------------------------------------------and then b and Y
*baksmali or backsmali?