ok so heres the issue,,,some one the command where not working on my stock donut running on my mytouch 3g (original) i thought this maybe be why my "checkin" request always errored out so i decided to reflash/reinstall donut. the file i used was from the google server but didnt not install. it gave me a few error about the bootloader and aborted. ever since this was done i cannot get a signal. my tmo card gives shows 3g but doesnt not connect to data and my at&t sim doesnt show a signal period (both apn's are entered and are correct)
any idea on how to fix this? or how to correctly flash the official donut file?
Update: the phone did a wipe so im back at the login menu for the google acct so now i cant even access the sd card and i dont have a reader. is there another way to get to the card and add/remove files with usb to phone?
Related
I am not really sure what happened. I have JF1.51 installed on my g1 and haven't had any issues at all with it. Today for some reason my phone stopped recognizing the t-mobile network. I tried multiple sim cards and haven't had any luck. My wife has a completely stock g1 and her phone works fine even with my sim card in it. I have tried going into call settings and it just says network error. I know that the phone is still under warranty, but I can't downgrade back to rc29 because I won't be able to re download the updates since I can't log into my gmail account. Does anyone have any ideas on what I should do? I really can't afford a new phone. I could just install one of the roms that doesn't have any theme modifications, but not sure if they would noticed I have an updated spl and radio and apps2sd. Please give me some ideas. Any help is greatly appreciated.
-I recently installed Cyanogen's new rom 5.0.8 Stable.
-After doing so I was unable to get any kind of network connection other than Wifi.
-I tried doing a nandroid but the file was accidently erase. I tried to flash the SPL and Radio again to see if there was a glitch. I tried reverting to 5.0.7 and still no data. I thought maybe if I went back to the begining I would be ok and could just update my way back up. I loaded the Sappimg.nbh from cyanogens wiki to my SD card and ran it through the volume+down method.
-After installing this I still have no wireless connection but I also have no 3g no recovery and I can't get passed the google log in screen. Also my SPL was revert so I can't do fast boot. Does anyone have any idea what I can do?
-I have tested my sim card in another phone and it works fine.
-Please help if you can I can't figure what to do with it and I think I am only making it worse if I haven't Completely broke it.
-Any help would be greatly appreciated.
I think this is an easy fix mate. Just go into mobile network settings and check the radio button next to your network provider. This will issue the relevant APN settings for your network.
Hope this fixes your issue.
I found out it was a bad SIM card cause by something in Cyanogen 5.0.8 ds stable. There has been a small number of people with this same issue that have been posting on the Cyanogen forums about it, I got a new sim card but a little weary to install the rom again... Then again most people who replaced thier SIM are up and good so...
Thank you for your help though man
So as I was en route to completing a full flash of my Droid X onto Cricket I couldn't get my web working. Two things I hadn't done were my autosh files and my NVRAM from whiterabbit.org I got my NVRAM file from whiterabbit and wrote it to the phone. it wrote. I restarted the phone and everytime it starts it goes to 1x , then up to 3g, then restarts. everytime. Just enough time to allow me to put it into airplane mode so that I can try to fix it. I didn't backup my NVram sadly so if anyone has a backup please send it my direction. It would be greatly appreciated. this is fixable since i can access my phone still.
-Update today-
Not sure if it means anything but i went into QPST and switched my Mobile IP behavior from mob+simp f/back to simple ip only and it and now it doesnt constantly restart i switched it to mobile ip only, same result, but data still isnt working yet. switching back to mob+simp f/back makes it restart it seems.n
Also noticed that when I turn on my wifi and I switch it to simple IP only it still puts me in a reset loop.
furikazashi said:
So as I was en route to completing a full flash of my Droid X onto Cricket I couldn't get my web working. Two things I hadn't done were my autosh files and my NVRAM from whiterabbit.org I got my NVRAM file from whiterabbit and wrote it to the phone. it wrote. I restarted the phone and everytime it starts it goes to 1x , then up to 3g, then restarts. everytime. Just enough time to allow me to put it into airplane mode so that I can try to fix it. I didn't backup my NVram sadly so if anyone has a backup please send it my direction. It would be greatly appreciated. this is fixable since i can access my phone still.
-Update today-
Not sure if it means anything but i went into QPST and switched my Mobile IP behavior from mob+simp f/back to simple ip only and it and now it doesnt constantly restart i switched it to mobile ip only, same result, but data still isnt working yet. switching back to mob+simp f/back makes it restart it seems.n
Also noticed that when I turn on my wifi and I switch it to simple IP only it still puts me in a reset loop.
Click to expand...
Click to collapse
Did you also write the PRL to the phone after writing the NVRAM? Your PRL should be version 49027. mob+simp f/back will need to be enabled.
If you want to start over, you can SBF to .340 or use the maderstcok zip .340 and your DX will be up to date and fully stock.
I've used bootstrap and rom manager to go back to stock before altering web so that isn't an issue anymore. I've stopped trying the nvram. Everytime I enter the proxy info fully inthe phone manually the phone does the 1x 3g then reset loop. Im guessing something is forcing a reset but can't figure it out. I went into test mode once to force 1x only and keep out 3g but alas it still looped. Ideas? Im also installing log cat to see if maybe a log.can tell me why the phone soft resets during the.loop
Sent from my DROIDX using XDA App
Im using prl 49027. I've narrowed it down to possible glitch. Upon entering the info for the proxy manually it goes into 1x then 3g then reader loop. Ivebeen using a stock backup to revert to prior tweaking so I can keep trying to figure this out if u have a exact method u use im all ears. Or just ideas. Im running out lol
Also one more thing, ive just entered in the proxy information manually via the cell phone and the phone hasnt given me a boot loop like it used to, still the internet isnt working yet so im going to go into QPST and see if just changing the mobile IP setting throws me into the loop again...EDIT: it sends me into a soft restart loop since its on mob+simp f/back again... catlog didnt show anything that i can see sadly. the soft restart forces the log to stop and doesnt show why it did.switched it back to mobile ip only and stopped the reboot cycle but no data at all ugh...
EDIT: used my backup again after the reboot cycle issue , found out that after i end up using a NVRAM i get the boot loop again...so in other words i unfortunately have to factory reset because i used the NVRAM addon, one thing i noticed was it updated 11 things, not 12. not sure why. moving on..
furikazashi said:
Im using prl 49027. I've narrowed it down to possible glitch. Upon entering the info for the proxy manually it goes into 1x then 3g then reader loop. Ivebeen using a stock backup to revert to prior tweaking so I can keep trying to figure this out if u have a exact method u use im all ears. Or just ideas. Im running out lol
Also one more thing, ive just entered in the proxy information manually via the cell phone and the phone hasnt given me a boot loop like it used to, still the internet isnt working yet so im going to go into QPST and see if just changing the mobile IP setting throws me into the loop again...EDIT: it sends me into a soft restart loop since its on mob+simp f/back again... catlog didnt show anything that i can see sadly. the soft restart forces the log to stop and doesnt show why it did.switched it back to mobile ip only and stopped the reboot cycle but no data at all ugh...
EDIT: used my backup again after the reboot cycle issue , found out that after i end up using a NVRAM i get the boot loop again...so in other words i unfortunately have to factory reset because i used the NVRAM addon, one thing i noticed was it updated 11 things, not 12. not sure why. moving on..
Click to expand...
Click to collapse
So you did this in QPST:
-----NV items from http://www.whiterabbit.org/android (you must generate this uniquely for your phone, go to the link enter [email protected] replace x's with your 10 digit phone number, make sure 2.7 is selected and download the file)
----Now go to the Memory tab. Under NV Items click Write. Browse and select
the NV Item file you generated earlier. Once its done it will say 12 NV
Items were successfully written to the phone
-----I used the PRL attached to do the OTA. (CricketEVDO_38515.prl). I had to put .zip at the end to upload it, so just rename it to CricketEVDO_38515.prl.
-----Now go to the Other tab. Under PRL click Write and browse to the destination you saved the attached file.
Let me know if this helps at all.
I sent NV items from the whiterabbit but this time it updated 12 items, not sure why it did 11 the first time. i also updated the prl to 38515 still no internet though, going into pst to see if the mobile ip behavior is the way its supposed to, update in a sec
UPDATE: phone was set to mobile ip only switched back to mob + simp f/back. and VOILA. 4:28am two weeks later and BAM internet and voice I will be writing a tutorial basing what ive learned into a stable 99% success rate for flashing droid x to cricket, ive only seen a handful out there and im sure i can hepl someone the way everyne has assisted me. thank you everyone. also just upgraded to 49027 prl for 3g and works great not enough 1x coverage where i live sadly.
I recently installed win 7 on hd2 and activated, everything was working including market but now i dont have 3g service only wifi
i tried setting the apn according to tmobile u.s. Settings and did not work .i tried using the app for the market connection set up and ran the app it said that the device has been set up .but no 3g either..PLUS I CANT SEND PICS IN MY TEXT MESSAGES .any ideas
olmec2012 said:
I recently installed win 7 on hd2 and activated, everything was working including market but now i dont have 3g service only wifi
i tried setting the apn according to tmobile u.s. Settings and did not work .i tried using the app for the market connection set up and ran the app it said that the device has been set up .but no 3g either..PLUS I CANT SEND PICS IN MY TEXT MESSAGES .any ideas
Click to expand...
Click to collapse
do what you have already tried but set it for a different network, restart, then change it back to your actual network, also try reseating your SIM card.
Worked for me, hope it works for you too!
what type of apn setting do you recommend
initially change it to anything other than your network
so, if i was on orange, i would change to O2, restart, then change it back to orange and restart
HTC tool should help with your settings or use google
so, google "T-Mobile US APN settings" without quotes if t mobile US was your network
i tried what you suggested no luck in the u.s. the sttings are suppose to be epc.tmobileus.com but still does not work
long shot but try giving your SIM card a clean and stick it back in, another longshot is try installing WITHOUT an SD card, just curious if that is another one of the issues that can happen with a incompatible card, yeah i know the rest is working fine but try it and see, you never know!
other than that im running out of ideas...
did you download the htc data connection app from marketplace, or can you, to automatically configure your hd2 for tmous?
why were you manually trying to configure your hd2 for t-mobile network?
best bet is to re-flash since it worked before.
the 3g service stopped working when activated the phone .... market works but i can only log in through wifi and i did download htc connection set up and ran the app it said that the apn was set . but when i tried to run internet explorer its says no data service.
olmec2012 said:
i tried what you suggested no luck in the u.s. the sttings are suppose to be epc.tmobileus.com but still does not work
Click to expand...
Click to collapse
use epc.tmobile.com... That's the one I used worked fine. Now I just use connection setup to setup my mms messages also.
Also stupid question is the 3g switch on in settings.
I've got the same Problem....
I'd the same Problem on Nand Android so i decided to switch to win7. But same Problem here. If i have 3g enabled i got no Service at all. If i disable 3g i got Service and Data Connection begins to work.
See this Thread in Android section:
http://forum.xda-developers.com/showthread.php?t=971920
So any hints how to get 3g working?
Phil
start again,
flash a stock original ROM for your device, put it all the way back to WM6
you will need to SD card flash this ROM
then go through all the steps, HSPL, Radio, magldr then try WP7
when things dont add up its often best to start from scratch.
I've done exactly that when i migrate from android to WP7. The only thing remains on the Phone was HSPL. And after all (installing MAGLDR and so on) the Problem persists.
kruemel666 said:
I've done exactly that when i migrate from android to WP7. The only thing remains on the Phone was HSPL. And after all (installing MAGLDR and so on) the Problem persists.
Click to expand...
Click to collapse
if hspl was still on then you didnt stock original ROM flash via SDcard
you need to download an official ROM from whoever sold the phone
doing that will remove hspl, reinstall the spl, radio and the ROM
make sure its an old ROM with a 1.4x SPL, then install hspl again, 2.08
Ok I've done what you tell me.
I have a Device from Vodaphone Germany and i can't find any Rom with 1.4x. The oldest i found was 1.72.
I extracted the Rom and copy the LEOIMG to the sdcard. Power on Phone with Vol down and flashed the ROM with sdcard. Reboot the Phone and all cames up fine.
Power down Phone and wen't into SPL Mode, installed HSPL, updated Radio to 2.15.50.14 and installed MAGLDR 1.13.
After this i flashed my WP7 Rom and let it boot. Choose all my seetings in the wizzard. Enter my LiveID credentials and tapp on login. And after a few seconds i get the Message the Phone could not Connect!
But it seems this is another issue cause i got a big "H" and full Service.
Thank you very much!
kruemel666 said:
Ok I've done what you tell me.
I have a Device from Vodaphone Germany and i can't find any Rom with 1.4x. The oldest i found was 1.72.
I extracted the Rom and copy the LEOIMG to the sdcard. Power on Phone with Vol down and flashed the ROM with sdcard. Reboot the Phone and all cames up fine.
Power down Phone and wen't into SPL Mode, installed HSPL, updated Radio to 2.15.50.14 and installed MAGLDR 1.13.
After this i flashed my WP7 Rom and let it boot. Choose all my seetings in the wizzard. Enter my LiveID credentials and tapp on login. And after a few seconds i get the Message the Phone could not Connect!
But it seems this is another issue cause i got a big "H" and full Service.
Thank you very much!
Click to expand...
Click to collapse
am i right in thinking that was different to the previous problem, where it would only connect with 3G disabled?
if thats the case that happened to me as well, i had to do the HTC connection wizard trick, change it to something else, restart, change it back again, restart
everytime i flash i have to do that which isnt too much of a pain
hi, i was updating my phone to Gingerbread (2.3.5) B258. and then Upgrading to ICS. but no matter which custom rom i use or Official Rom. all works fine but then i can´t turn on the WiFi. when i click on the icon give me "Error" any idea abut what to do?
try many solutions but no one fix my inssue
Lxandrite said:
hi, i was updating my phone to Gingerbread (2.3.5) B258. and then Upgrading to ICS. but no matter which custom rom i use or Official Rom. all works fine but then i can´t turn on the WiFi. when i click on the icon give me "Error" any idea abut what to do?
try many solutions but no one fix my inssue
Click to expand...
Click to collapse
Wi-Fi is using similar memory controller as SD card. I had an issue where my SD got corrupted and Wi-Fi did not turn on because of it aswell. So try removing/replugging the SD card (and restart afterwards).
Ty for your answer blefish, i try what u do and try with another SD card, and i put my SD to another device. and i can´t turn on wifi, but my friend phone´s works well.
UPDATE: i made a downgrade to 2.2.2 froyo and WiFi Works Well.. any hint to upgrade my phone? whitout lose WiFi?¡
]when you're on ICS do you have an IMEI number? If not your phone is screwed on any ROM higher than GingerBread. Mine is the same. It just cycles through the connecting cycle on and off. I've even tried forcing an IMEI number through a program but it didn't change anything.
EDIT: nevermind finally after hours and hours of trying to revive this phone I got my IMEI back and wifi working. Damn it took ages to figure out.
Flashed to Official Gingerbread, then done the steps of retoring my IMEI number which is listed behind my battery. I used DFS tools for this and a post that tells you how to access the project setting menu to enable the settings. Then I wrote my IMEI number back on my phone, then rooted it and installed a custom recovery. Then from there installed Aurora ICS and used another post here to write my Mac address found behind my battery using Terminal Emulator. And bam! my wifi isnt stuck in a loop trying to connect anymore.
I got an IMEI number but the wifi dosent work, do I need to simply use TWRP to get official? then go back?