Database Users

[Q] wifi problem - 802.1x EAP network

Hi,
I'm running CM7 (2.3.4) v.138 HACKDROID on an X8.
I'm unable to connect to a 802.1x EAP network, despite the fact I can successfully connect to WEP protected networks.
I was able to the 802.1x EAP network fine when running Froyo... but since I installed CM7 v138, I lost access.
I can get just fine to the point where I enter my credentials, but after that it is like my credentials aren't valid and my phone tries to conect to another network.
Any thoughts on what I can do?
Thank you very much

atlasbr said:
Hi,
I'm running CM7 (2.3.4) v.138 HACKDROID on an X8.
I'm unable to connect to a 802.1x EAP network, despite the fact I can successfully connect to WEP protected networks.
I was able to the 802.1x EAP network fine when running Froyo... but since I installed CM7 v138, I lost access.
I can get just fine to the point where I enter my credentials, but after that it is like my credentials aren't valid and my phone tries to conect to another network.
Any thoughts on what I can do?
Thank you very much
Click to expand...
Click to collapse
did you change tiwlan file for faster wifi for x8? with 802.11N ? cause I have similar problem and I think I solved

No, I haven't done anything like this... was just hoping it would work out of the box.
Can you please point me to the referred file?
Very much appreciated.

http://www.fileserve.com/file/7jqvBPU here is the link for original "tiwlan.ini" file.
move it on your sd card, then with root explorer copy it and paste it in system/etc/wifi (if there is no such folder "wifi" paste in it system/etc) then go to settings and from there delete all remembered wifi network,then reboot phone and it should help. if not change rom and then try the same.hope helped
p.s you should turn on RW or root explorer and anyway save your own tiwlan.ini file which you'll find in system/etc or system/etc/wifi.(move that on sd card and rename tiwlan1.ini or smth)

Thanks a ton! Will do this right now and will be able to report back on Mon.

atlasbr said:
Thanks a ton! Will do this right now and will be able to report back on Mon.
Click to expand...
Click to collapse
Can you connect now?? how??

From my experience i can say that 802.1x EAP (eduroam connection with cert.)for me is working only on gingerxperia v7. On diferent version(DX 12-18, GX 8-12) i cant connect. I try change files from v7 (system/etc/wifi) to another roms but it was not working (files from v7 are little diferent than in other roms). So i must say that only option for me to have eduroam connection is rom gingerxperia v7 which isnt the best nowadays...

Does anyone have a solution for this??
I have the same issue on my X10 Mini running MiniCm7 2.1.4 (Android 2.3)
Is there a way to copy files needed for wifi from a previous ROM? Android 2.1 was working OK on wifi 801.2 enterprise. So I would like to copy files from an Android 2.1 Rom (e.g. Stock rom) to my current ROM. Is this possible? Which files do I need to copy?
I tried already
system/bin/wpa_supplicant
system/bin/tiwlan_cu
system/bin/tiwlan_loader
But then I get "Wifi error" after enabling Wifi ...

100% working wpa_supplicant for galaxy s2 ad hoc mod for gingerbread 2.3.3 and 2.3.4

hello friends
today i m showing you a 100 percent working wpa_supplicant for galaxy s2 gingerbread rom for ad hoc network. yes it is test by me and also this is modified by me too. no one is responcible and cant take credit for developing it. currently i m using and testing on litening rom 6.1 and it works flawlessly. so no more wait for new wpa supplicant. becoz wait is over now. use it and reply me about ny bugs. i will try to revamp it. bye
download attachment and use it
if u like my work then plz donate me on my paypal account
[email protected]
and plz reply thanks

This is great!!! Tested on my galaxy SGS1 and works perfectly!
Thanks!!!
Edit: i can connect only if i set my ad-hoc network unproteced. If i add wpa2 or even wep security the phone gets stuck on "Obtaining IP address...", but it could be my ubuntu notebook.

Awsome sauce!!! Been waiting for this. Downloading and testing it now on my SG1.
Thanks
edit: just realised it is not a CWM flashable zip. Where do I put this?
edit2: figured out where to put it so dont worry. Cannot obtain IP address though on an unsecured ADHOC network.

what is this ?

It alows your phone to use your laptop/desktops internet connection. Create an ad-hoc wireless network on your laptop/desktop and then search for that network on your phone connect and voila your phone should now use the interent through your laptop/desktop.
I like it cos it means I can use my internet connection at work instead of 3g.

SGS2 on lite'ning v4.2 (2.3.4)
Open: 'obtaining IP' loop
WEP: 'obtaining IP' loop
WPA: [no connection]

it is not cwm file. first u have to unzip it then copy and paste this on system/bin folder on ur rooted gs1 and gs2.but this will work perfectly on gingerbread 2.3.4

hi haymzee
you should use litening rom ver 6.1 not 4.2 otherwise it will not work correctly.so first update ur rom in 6.1 and then use this wpa file ok

OH YES! will test and report; long awaited!

I can connect in the morning but after turn airplane mode on-off, then I can't connect till now.
It shows obtaining IP address, even I try to re-boot both phone. T_T

Hello everyone,
I finally managed to solve the problem of connections
thanks

hi to everybody,
thank you for your work!!!!!!! is perfect!!!!

hi,
i'm running LeoMar75 Revolution 2.6, and this wpa_ did not pass obtainig ip loop.
neither wit unprotected or wep protected adhoc network

guidox79 said:
Hello everyone,
I finally managed to solve the problem of connections
thanks
Click to expand...
Click to collapse
Hello, how did you manage to solve the looping 'Obtaining IP address.." problem ?

Also got the same problem of Obtaining IP address. I tried many configurations of changing the ip address manually with static ip address settings

Its working perfectly on our rom.
10 char will b built in in the next release
For all noobs:
Use root explorer
Unzip and put the file in system/bin
Reboot
Done.
Now test
Sent from my GT-I9100 using XDA App

I use LogMeIn.apk

any solution for GB 2.3.5 ???

I've tried ad hoc on 4 different laptops and it only worked on the newer ones

I can confirm this works 100%. I tethered the internet connection on my Macbook Air with the phone using AdHoc Wifi successfully.

wifi problem...tytung please advice me!!!!

Hi guys...am only geting wifi at home...not workin at my brothers house. it keeps conecting and disconnecting and authenticating..however when i boot the phone from windows the wifi works ok at his house!...i was using tytung v 2.8 gingerbread... i have made a fresh instal using tytung v 3.0 gingerbread but the problem is stil there.....using a htc hd2 running andrtoid from sd card.........please could somebody shed sum light!!!...

control wifi security type of router. wpa is better for android. you may have problems with wep security

...after the phone has scanned for wifi it brings up WPA/WPA2 PSK alongside the network name...after keying in the security password it just wont connect.......keeps connecting and disconnecting......seem to be having the same problem at me mates house aswell!!

shaz999 said:
...after the phone has scanned for wifi it brings up WPA/WPA2 PSK alongside the network name...after keying in the security password it just wont connect.......keeps connecting and disconnecting......seem to be having the same problem at me mates house aswell!!
Click to expand...
Click to collapse
Try a trila and error - disable security on the router completely for a few minutes and see if it stays connected. If it does stay connected without security, download the latest tytung kernel package from his thread, extract the wpa_supplicant from /system/bin and push it to the /system/bin in your android. See if that helps.

ok..thanks for your reply... i will try this out...if it does the trick you will have to advice me on the system bin thing!!!!!.........sorry i am new to android romming...might possibly drop you a email....

hd2 hspl

hi,
so i was wondering do you need hslp (not spl) to run wifi on ics (sd version not nand) because i dont have hspl and wifi works for my gingerbread currently but if i want to change to different sd roms wifi never works
Plz Help!!!

HSPL has nothing to do with SD builds.
It doesn't affect the way your ROM behaves and you don't need it whatsoever. [As long as you're not using NAND]

so do you have any idea why my wifi doesnt work ??

It is probably kernel related, have you (tried to) change it recently?

do you mean acutal roms, them yes i have tried about 5 and non of them work ( i mean wifi )

it would help massively if you explained in what way your wifi doesnt work. i.e does it turn on but not connect? does it appear to connect but no network? It would also help if you described your network a little, i.e wep? wpa? mac filtered? home router? works router? You've confirmed it works under other android sd roms, right? just ICS?
Just saying 'it doesnt work', is like phoning a mechanic and saying 'my car doesn't work, , tell me what's wrong''.

hi,
my wifi network shows up on the wifi settings and if I enter my password it just says = secure with with WPA/WPA2 PSK but it dows not connect. I have wpa2psk network at my rom is MDJ_GingerBread_HD2_v.1.0_RC5_RAM_STOCK( which wifi works). I want to set up IceCreamTostidroid v11.0 normal. Is it the roms fault or mine???
thx for the help

Flashpoint382 said:
hi,
my wifi network shows up on the wifi settings and if I enter my password it just says = secure with with WPA/WPA2 PSK but it dows not connect. I have wpa2psk network at my rom is MDJ_GingerBread_HD2_v.1.0_RC5_RAM_STOCK( which wifi works). I want to set up IceCreamTostidroid v11.0 normal. Is it the roms fault or mine???
thx for the help
Click to expand...
Click to collapse
If you are booting through haret try this,in wm6.5 turn on airplane mode,now boot back to android,try wifi now
Sent from my HD2 using xda premium

Oxygen OS 10 without Wi-Fi !!!

As in beta, you still can't connect to Wi-Fi in official Oxygen OS 10. Network reset did not help
OP 6T has no IP address.
Anyone have any ideas?

..

I had a Bet 10 v.17 phone also had no Wi-Fi connection.
After returning to Android 9, IP appeared again and there were no connection problems.

This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.

Azar_k said:
This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.
Click to expand...
Click to collapse
I have turned off all filters on the router.
I changed to MAC of device, to randomized MAC. Nothing new.
Still can't connect to Wi-Fi.
This is insane! New system and connection problems?
Instead of getting better, it's getting worse.

Bluetooth issues on my phone

I can't even enable wifi connection

Reflash the official update zip....worked for me

I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.

SOLUTION !!!
justforkix said:
I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.
Click to expand...
Click to collapse
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Currently, Android 10 connects to a Wi-Fi network without a problem.
You should write the patch in Android 10.

Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?

Is your OnePlus font italic?
Have you used Magisk Canary?

justforkix said:
Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?
Click to expand...
Click to collapse
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?

drozel said:
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?
Click to expand...
Click to collapse
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.

WPA/WPA2 helped for me... OP can't connect to only-WPA2 networks after Android 10 update.
Installed via OxygenUpdater, no root, no unlocked bootloader, full stock
Alex_H_H said:
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Click to expand...
Click to collapse
many, many thanks!

I can still connect to my existing network, I just had to update my MAC filters.
I really advise against using WPA at all - see if there is firmware update for your router.

Are you using Magisk Canary?
Roll back to Stable and reinstall oos

firegate22 said:
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.
Click to expand...
Click to collapse
I had the same issue, flashing a custom kernal (Omega) fixed the problem. Why ? Idk

change private DNS to automatic
changing my DNS from cloudflare to automatic helped me (after also switching to device MAC)

dbarrett480 said:
Reflash the official update zip....worked for me
Click to expand...
Click to collapse
Did you flash the full zip or incremental? From TWRP? Is any wipe necessary after flashing?