Related
This is a release for my ROM porting kitchen. It ports both XIP's and SYS folders. It currently supports the following:
Herald
Wizard
Prophet
Kaiser
Elf/Elfin
Hermes
Zinc
Athena
http://www.darthnet40.com/xda/ivanmmj/Kitchens/
(You will need 7-Zip to open the file.)
This is compatible with Bepe's extended kitchen, but I don't believe he ever released one for every device out there. It requires a ROM folder with an extracted XIP folder within it. Just download the Herald's and you'll see what I mean. The ONLY tested section has been the Herald section as that's the only device that I have.
If your device is compatible with Bepe's kitchen or my kitchen, it will automatically launch the kitchen right after.
Instructions:
Delete your old SYS folder
Place the SYS file you wish to port into Working_Folder
Place your xip.bin that you wish to port into the Prepare folder
*Note: Close the XIPPort program after pressing "Make Packages." The script will take over after that.
You should not have a Working_Folder with an OEM, SYS and XIP folder (and a Tools folder if you have Bepe's kitchen, even more if you have my kitchen.)
Double click on the RunMe file and choose your device.
For those who have a kitchen:
Place bepe's kitchen in the Working_Folder (so that OEM/SYS/ROM and other folders are right within Working_Folder.) Alternatively, you can place also place all the files into EasyBakeOven's folder. Allow the Working_Folder to override EasyBakeOven's Working_Folder. You will not loose any data but will bypass a few "info" scripts. This will not cause any problems.
Obligatory Warning Label:
Use this at your own RISK. I cannot be held liable for any damage caused to your device by your own mistakes or by my mistakes in the instructions.
If you wish to know how to do this manually, head over to my HowTo thread.
Thank you's go to:
Bepe for his Extended kitchen and Herald/Atlas files
ababrekar for the elfin files
l3v5y and xvx45 for the Prophet files
character and ginminded for the Wizard files
Script for the Kaiser files
tjkhattak61 for the Atom Exec files
cruzzmz for the Zinc files
caxio for the Hermes files
irus for the Athena files
Changelog
V2.2
Added Athena Compatibility
V2.1
Added Prophet Compatibility
Added Elfin/Elf Compatibility
Added Hermes Compatibility
Added Kaiser Compatibility
Added Zinc Compatibility
Added Atom Compatibility
V2
Added Wizard Compatibility
Rewrote script to add expandability
V1.5
XIP porting complete
V1
SYS porting complete
Woo! I've failed to find a link for this up till now, but now I can cook some new ROMS!!
One thing, the read me doesn't include some of the more reason compatibility improvements...
Welcome to EasyBakeOven!
Devices supported:
Herald/Atlas
Wizard
Note: Make sure that the XIP in your recieving folder has been extracted already (You should have a ROM folder with a XIP folder inside it.) This is not an issue if you're using Bepe's Extended 6.1 kitchen or my own JustClean EasyBakeOven.
Thank you's go to:
Bepe for his Extended kitchen and Herald/Atlas files
ababrekar for the elfin files
l3v5y and xvx45 for the Prophet files
character and ginminded for the Wizard files
Script for the Kaiser files
tjkhattak61 for the Atom Exec files
cruzzmz for the Zinc files
caxio for the Hermes files
irus for the Athena files
Click to expand...
Click to collapse
l3v5y said:
Woo! I've failed to find a link for this up till now, but now I can cook some new ROMS!!
One thing, the read me doesn't include some of the more reason compatibility improvements...
Click to expand...
Click to collapse
Noted. Thank you!
Has anyone found this even remotely useful? If not, I will not pursue adding more devices.
Has anyone found this even remotely useful? If not, I will not pursue adding more devices.
Click to expand...
Click to collapse
I have! I've ported a Kaiser XIP and a Touch one to the Prophet! Problem is I couldn't find the latest builds so they where slightly out of date...
l3v5y said:
I have! I've ported a Kaiser XIP and a Touch one to the Prophet! Problem is I couldn't find the latest builds so they where slightly out of date...
Click to expand...
Click to collapse
Just for being nice to me, here you go!
That's the newest official build. Be careful of anything "newer," they're fakes.
It's the one labeled 19213.7z
You'll need 7Zip to open the file. In it as the xip.bin and the SYS folders.
Yay!!!
Porting time!
I have one feature request!
Would it be possible to build a feature in that cleans out the folders before porting?
I think I'll test later cause actually I'm in exam but I think it work, I'm on the same device as l3v5y so I'll make my test and maybe take to you Artemis files (my other phone)
Thank for your hard work
Great tool ivanmmj.... I have a few questions. I guess I don't fully understand the process.
I've been able to get the XIP folder, os.nb.payload and romhdr.bin files from a KAISER rom... plus I used the .VM and WinCENLS_WWE folders from a working HERMES rom, but I can't seem to get past the second boot screen. A question I had is... do we use the os.nb.payload and romhdr.bin we got from the KAISER? or do we use those from a working hermes rom? and the XIP directory, do we need to change anything in there? or is just extracting it out, enough to work?
Thanks in advance.
Awesome tool, looks like a dummy can me even port ROM's will try it out sometime. Thanks bunches!
l3v5y said:
I have one feature request!
Would it be possible to build a feature in that cleans out the folders before porting?
Click to expand...
Click to collapse
Already ahead of you. Today I noticed that I tend to leave a mess behind. lol I'll have it remove the files before replacing them, then I'll have it delete the extra files created during the process when it's done. (This part is already ready but I just haven't uploaded it. The removing the files before replacing them, I haven't done so, yet. Although this might not really be needed. Only the cleaning after part.)
...Maybe I don't know what you're talking about. lol
Explain it to me.
AssassinsLament said:
Great tool ivanmmj.... I have a few questions. I guess I don't fully understand the process.
I've been able to get the XIP folder, os.nb.payload and romhdr.bin files from a KAISER rom... plus I used the .VM and WinCENLS_WWE folders from a working HERMES rom, but I can't seem to get past the second boot screen. A question I had is... do we use the os.nb.payload and romhdr.bin we got from the KAISER? or do we use those from a working hermes rom? and the XIP directory, do we need to change anything in there? or is just extracting it out, enough to work?
Thanks in advance.
Click to expand...
Click to collapse
You need the XIP folder, os.nb.payload and romhdr.bin of YOUR device and the xip.bin and SYS folder of the rom you want to port INTO your device. Which device do you have? Tell me and I'll "draw" a map of what goes where.
xvx45 said:
I think I'll test later cause actually I'm in exam but I think it work, I'm on the same device as l3v5y so I'll make my test and maybe take to you Artemis files (my other phone)
Thank for your hard work
Click to expand...
Click to collapse
That would be more than welcomed especially since I'm gonna use my Herald cooking class and modify it to teach Artemis users, also.
ai6908 said:
Awesome tool, looks like a dummy can me even port ROM's will try it out sometime. Thanks bunches!
Click to expand...
Click to collapse
My hope is that it will allow just about anyone to port a ROM. ^_^
ivanmmj said:
You need the XIP folder, os.nb.payload and romhdr.bin of YOUR device and the xip.bin and SYS folder of the rom you want to port INTO your device. Which device do you have? Tell me and I'll "draw" a map of what goes where.
Click to expand...
Click to collapse
Thanks for replying ivanmmj... I have a hermes, and I've been doing exactly that... my problem is when I go to build it, I get "An unhandled win32 exception occurred in buildxip.exe [2276]"
If I put in my older XIP build, buildxip works fine... so I'm lost now. Oh, and I'm trying to port the 19213 official att kaiser rom XIP.
AssassinsLament said:
Thanks for replying ivanmmj... I have a hermes, and I've been doing exactly that... my problem is when I go to build it, I get "An unhandled win32 exception occurred in buildxip.exe [2276]"
If I put in my older XIP build, buildxip works fine... so I'm lost now. Oh, and I'm trying to port the 19213 official att kaiser rom XIP.
Click to expand...
Click to collapse
You'll need:
OEM: hermes
ROM folder: Hermes (uncluding the XIP folder and all the other files)
SYS folder from kaiser (look for and remove MSkernel from this folder... I'm not 100% on that folder yet and future versions may handle that folder automatically)
Place the xip.bin from the kaiser into the prepare folder.
Now run the RunMe
ivanmmj said:
You'll need:
OEM: hermes
ROM folder: Hermes (uncluding the XIP folder and all the other files)
SYS folder from kaiser (look for and remove MSkernel from this folder... I'm not 100% on that folder yet and future versions may handle that folder automatically)
Place the xip.bin from the kaiser into the prepare folder.
Now run the RunMe
Click to expand...
Click to collapse
I really appreciate your help ivanmmj, same thing again. It chokes up on BuildXIP.exe ...I have BuildXIP version 0.53 if that makes any difference. I tried with two XIP versions... 19209 and 19900. I'm about to give up.
Oh and I have Visual Studio 2008 installed, so I don't think it would be the runtimes... would it?
AssassinsLament said:
I really appreciate your help ivanmmj, same thing again. It chokes up on BuildXIP.exe ...I have BuildXIP version 0.53 if that makes any difference. I tried with two XIP versions... 19209 and 19900. I'm about to give up.
Oh and I have Visual Studio 2008 installed, so I don't think it would be the runtimes... would it?
Click to expand...
Click to collapse
It might be.... I'll have to do some research...
Ok, I even installed the vs2008 runtimes, same thing.. I found buildxip v.54, same thing... then i moved the whole ROM folder (new XIP) out and put in the old 19209 one and it ran... so maybe there's something wrong with 19213 with hermes? ok, I give up. Thanks for your help!!
19213 porting to elfin
i'm trying to port the 19213 to my elfin, and after porting when i use bepe's kitchen, it gets stuck at this screenshot. anybody help!!!
hello to all will u please anyone can help me to how we cook with extendir...i stuck with this step :
"Modify the order of all other file system filter drivers in your boot.rgu. Personally I change order 0 to 10, 1 to 11, 2 to 12, etc.
Modify your boot_ms.rgu (also in XIP) if you cooked encfilt.dll/mencfilt.dll in your rom.
Rebuild your boot.hv and port the boot.rgu, boot_ms.rgu and boot.hv in to your XIP. "
wil u please anyone can explain about the order of boot.rgu
thanks to all
shafizal said:
hello to all will u please anyone can help me to how we cook with extendir...i stuck with this step :
"Modify the order of all other file system filter drivers in your boot.rgu. Personally I change order 0 to 10, 1 to 11, 2 to 12, etc.
Modify your boot_ms.rgu (also in XIP) if you cooked encfilt.dll/mencfilt.dll in your rom.
Rebuild your boot.hv and port the boot.rgu, boot_ms.rgu and boot.hv in to your XIP. "
wil u please anyone can explain about the order of boot.rgu
thanks to all
Click to expand...
Click to collapse
When you look at the boot.RGU files you'll find some keys in the "HKEY_LOCAL_MACHINE\System\StorageManager\filters\" and "HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\filters\" sections.
Those keys have a value inside whose name is "Order", you have to find all of those keys and if there is any that has the order 0 (usually they all start from 1) you have to move all the values up by 1. (0 becomes 1, 1 becomes 2, etc.), then you can add the ExtenDir entries:
[HKEY_LOCAL_MACHINE\System\StorageManager\filters\Extendir]
"Order"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\filters\Extendir]
"Dll"="Extendir.dll"
"Order"=dword:0
If you have problems understanding this upload the RGU file and I'll do the changes for you.
airxtreme said:
When you look at the boot.RGU files you'll find some keys in the "HKEY_LOCAL_MACHINE\System\StorageManager\filters\" and "HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\filters\" sections.
Those keys have a value inside whose name is "Order", you have to find all of those keys and if there is any that has the order 0 (usually they all start from 1) you have to move all the values up by 1. (0 becomes 1, 1 becomes 2, etc.), then you can add the ExtenDir entries:
[HKEY_LOCAL_MACHINE\System\StorageManager\filters\Extendir]
"Order"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\filters\Extendir]
"Dll"="Extendir.dll"
"Order"=dword:0
If you have problems understanding this upload the RGU file and I'll do the changes for you.
Click to expand...
Click to collapse
thank u very much bro here is my boor.rgu
http://www.sendspace.com/file/5u38dj
shafizal said:
thank u very much bro here is my boor.rgu
http://www.sendspace.com/file/5u38dj
Click to expand...
Click to collapse
I looked and all the orders seem to be fine, you just have to add the two entries at the end
Code:
[HKEY_LOCAL_MACHINE\System\StorageManager\filters\Extendir]
"Order"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\filters\Extendir]
"Dll"="Extendir.dll"
"Order"=dword:0
If that doesn't work try the boot.rgu I attached where I added those two entries and also moved all the others entries' order up by 1.
airxtreme said:
I looked and all the orders seem to be fine, you just have to add the two entries at the end
Code:
[HKEY_LOCAL_MACHINE\System\StorageManager\filters\Extendir]
"Order"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\filters\Extendir]
"Dll"="Extendir.dll"
"Order"=dword:0
If that doesn't work try the boot.rgu I attached where I added those two entries and also moved all the others entries' order up by 1.
Click to expand...
Click to collapse
thank u very much bro will try this and i will post
How about
airxtreme said:
I looked and all the orders seem to be fine, you just have to add the two entries at the end
Code:
[HKEY_LOCAL_MACHINE\System\StorageManager\filters\Extendir]
"Order"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\filters\Extendir]
"Dll"="Extendir.dll"
"Order"=dword:0
If that doesn't work try the boot.rgu I attached where I added those two entries and also moved all the others entries' order up by 1.
Click to expand...
Click to collapse
That is the easier part. How do you add the file extendir.dll to xip?? Thats the problem I am facing and for which there seems to be no answer.
Premananda_laishram said:
That is the easier part. How do you add the file extendir.dll to xip?? Thats the problem I am facing and for which there seems to be no answer.
Click to expand...
Click to collapse
If you're using platformrebuilder or a platformrebuilder-based kitchen it's just a copy&paste of the module inside the OEMXIPKernel folder. I have no idea about others but if they use XIPPort is going to be a mess.
request
airxtreme said:
If you're using platformrebuilder or a platformrebuilder-based kitchen it's just a copy&paste of the module inside the OEMXIPKernel folder. I have no idea about others but if they use XIPPort is going to be a mess.
Click to expand...
Click to collapse
Would you be kind enough to post or pm me an xip with extendir 1.6 already added in msxipkernel. I will just port it to my kitchen from then on.
Premananda_laishram said:
Would you be kind enough to post or pm me an xip with extendir 1.6 already added in msxipkernel. I will just port it to my kitchen from then on.
Click to expand...
Click to collapse
Sure but you have to tell me which cache size you want first.
2 or 4
airxtreme said:
Sure but you have to tell me which cache size you want first.
Click to expand...
Click to collapse
2mb or 4 mb cache 1.06 version. Please cook it with extendir in msxipkernel, because my kitchen does not have the provision to port oemxipkernel.
I forgot to mention, I will be cooking for wm6.1.
Premananda_laishram said:
2mb or 4 mb cache 1.06 version. Please cook it with extendir in msxipkernel, because my kitchen does not have the provision to port oemxipkernel
Click to expand...
Click to collapse
I attached the xip to this post
wm6.1
Can I use this to cook for wm6.1 rom? I edited my post a few minutes back.
And one final request. Could you please upload your whole kitchen(pre-port) to some sites so that I can use it to build xip for future extendir release. Bugging you every now and then would be very annoying to you.
Premananda_laishram said:
Can I use this to cook for wm6.1 rom? I edited my post a few minutes back.
And one final request. Could you please upload your whole kitchen(pre-port) to some sites so that I can use it to build xip for future extendir release. Bugging you every now and then would be very annoying to you.
Click to expand...
Click to collapse
I have no idea if it could work on WM6.1 but I supposed yes.
I used a clean oskitchen install, imported the latest leo rom, added the file to the MSXIPKernel folder and enabled the setting to halt after platformrebuilder runs to get the xip.bin from its folder. No need to upload the whole package just for that because you can take any wm6.1 rom for HTC phones (the first 6.1 rhodium ROMs are fine) and import it.
I cannot use it
I cannot use it. It says the dsm file is missing
Premananda_laishram said:
I cannot use it. It says the dsm file is missing
Click to expand...
Click to collapse
Platformrebuilder strips the DSM informations from the files to make the ROM faster so I can't do much about that. All I can tell you is that you can use xipport to dump another xip, then click build packages, add extenddir.dll+txt from my XIP dumped with xipport in the files\MSXIPKernel folder, click undo, click realloc P, click write maps and rebuild the xip.bin to have one with extenddir that your kitchen will probably accept.
mine
Here is the xip from my kitchen. Will it be possible to use it in your kitchen and then add the extendir dll. That way I can use it directly in my kitchen
Premananda_laishram said:
Here is the xip from my kitchen. Will it be possible to use it in your kitchen and then add the extendir dll. That way I can use it directly in my kitchen
Click to expand...
Click to collapse
I've attached the xip with extenddir in msxipkernel to this post.
BTW No it can't be used without having the full ROM; I had to do the work by hand editing the DSM and removing the debug libraries.
If you can upload an original ROM for your phone plus the kitchen you are using I can look if I can add support to oskitchen: since it's a 6.1 phone it should probably work fine.
you can put it anywhere in the xip, just remember that the module wont work in xip you have to use the .dll file.
Here it is
Here is my kitchen and folders
rom, sys and oem from this
http://asusmobile.ru/files/ROMs_P525/not_official/Alexx~/ASUS.P525.WM6.1.20273.1.3.3.WWE.exe
Kitchen attachment
I try to cook a ROM for my Acer neoTouch S200(F1), I could finish it for me, thanks hdubli, DimICE and rafyvitto
I just use a few tools but not GUI kitchen so that I could learn more about making ROMs:
xidump.exe for dumping
osnbtool.exe for dumping and rebuild the ROM
RecMod.exe
ImgfsFromDump.exe, BuildOS.exe, EXTReloc.exe
XIPPort.exe
f1extromtool.exe for ExtROM
At the same time, I'm porting EZInput CHT form HD2 Leo...
Of cause, I want to porting EZinput CHT in cab from, for anyone who don't use custom ROM besides HTC.
Questions:
1. I'm not sure that was RecMod disadvantage or bugs, it seems that the files after RecMod would lost the cert... (#2)
2. Then it could cause a ton of problems, such as how can I indicate files needed to re-sign? Any tools could port a cert to another file?
Or have to patch a ton of files even a whole OEM packages?
3. Would the modules at Slot 61 could reduces the actual free RAM of process (shown in the memory page), even the process not using these modules? Then, how to estimate the minimum RAM used?
You can't sign the modules - only the files.
utak3r said:
You can't sign the modules - only the files.
Click to expand...
Click to collapse
Then, could the SDKcert could be hacked for changing name of signer?
or how to make the cert for it?
Moreover, the difficult problems is that how to sign all the unsign dll and exe with SDKcert easier?
You can just cert patch the nk.exe and not have to worry about the problem (with EVK, just check a box). More to the point, what errors are you getting, and are you sure it's actually a certificate error and not a 'missing component' error?
Farmer Ted said:
You can just cert patch the nk.exe and not have to worry about the problem (with EVK, just check a box). More to the point, what errors are you getting, and are you sure it's actually a certificate error and not a 'missing component' error?
Click to expand...
Click to collapse
I'm not using EVK, because I'm cooking for Acer S200, then I just use a few tools...
Emmm, no any certificate error or 'missing component' error, just the services or programs could not be able to auto start.
Patch nk.exe could be a good choice for cook, but not the best for the user, I think.
However, for patch nk.exe, it still followes this thread?
http://forum.xda-developers.com/showthread.php?t=384137
Nagato Yuki said:
I'm not using EVK, because I'm cooking for Acer S200, then I just use a few tools...
Emmm, no any certificate error or 'missing component' error, just the services or programs could not be able to auto start.
Patch nk.exe could be a good choice for cook, but not the best for the user, I think.
However, for patch nk.exe, it still followes this thread?
http://forum.xda-developers.com/showthread.php?t=384137
Click to expand...
Click to collapse
so please tell us what is exactly your trouble... cause:
1.- cert patches are now a unusual issue cause the kitchens already has certs pkg included to void this things.
2.- use the xipporterexe in EVK to patch your nk.exe thats all then readd your nk to your kitchen.
3.- certs issues are
a) when you tap... it shows a dialog saying is not trusted signed or has missing compoenents...
a1.- this means (obviously after you add the certs pkg or enable the kit5chen option or whatever to fix it) that the lnk is pointed to a non complete PKG it has missed some files, due to "maybe" it needs the app files in program files or a bad pkg creation (app.reg or app.dat) (or initflash oem pkgs)
4.- why patch nk.exe is not the best option to users??? i guess is the best cause if they use a devs app it will works with a cert patched nk
5.- the service or apps wont auto launch.... mmmm you must to xplain better cause it seems not related to certs matbe autoshortcut.. initflashfiles or app.dat troubles or corrupted PKGS.
Advice: please please... post your device model, kitchen name and version, and sys oem version if posible
once you redesign your question i will change if you wish the name of the thread just have more help
keep it up
Much BIG THANKS for your reply
Because I am not use any GUI kitchens, at this time, it seems that no GUI kitchens for Acer S200, then I don't try EVR before.
(BTW, it seems that we lack of Universal GUI kitchens for any device? Because the process to make ROM could be much similar, except decompose and assemble back the ROM files. I'm trying to use osKichens... )
In my case, there no any dialog saying not trusted signed or has missing compoenents... It just doesn't run for apps.
For services, they could not be able to start automatically, but I could start them manually though Dotfred's TaskMgr, no any dialog happen also, but they could run correct functionally !
Then I sign with SDKcert, they work normally.
For patching nk.exe, it could be very difficult for users who just want to use official ROM, but want to use apps form dev. But sign the cert and import the sign could be much easier...
Then it leads the second question. I'm seeking any effect ways to Recmod and sign them with sdkcert ...
Of cause, I want sign them much look like OEM ones (subject's and issuer's names), but just using SDKcert only for running.
Moreover, XipporterEx for patching nk.exe, it seems that there is no standalone one for porting WM 6.5.x one. And also I'm not sure that besides EXTReloc, Is there any Reloc programs compatible for Acer S200/WM6.5?
p.s. I could try to modify my questions later, but if someone help could be much nicer. So, +Que, please feel free to change my topic for better one
The attached .provxml will not execute. It's supposed to associate icons with folders in the start menu, but it's just not working. It is totally unmodified from the Rhodium S2 ROM. The directories are there as the initflashfiles.dat file is unmodified and the folders are in the start menu. Anyone care to help?
Your file is fine so I guess that you have the same issue I had .
I guess you don't have that provxml added to any of dsm files . Just use this tool and add it to any of dsm files.
http://forum.xda-developers.com/showthread.php?t=523139
You can also use xml parser to check if file is good, for example Serna Editor.
Click to expand...
Click to collapse
Maybe I'm wrong, so if you already have this provxml added to any of dsm files, we'll look for more reasons. One more question, do you try to cook this into ROM or execute from Advanced Configuration Tool?
It's cooked in. The package is directly from the Rhodium S2 ROM, so I don't quite understand why it's not executing. I'm thinking about putting it in another OEM folder and seeing if that will help. Heck I'm lost, and about to turn it in for the night.
As I wrote, try adding it manually to dsm file in that OEM folder, this should help you, if this won't help, then I'm out of ideas.
Anyway, you can just add content of that provxml to another provxml, it's dirty way but probably the easiest one.
This happens because the messenger.lnk have not been created when this provxml is executed and it fails.
So just rename the provxml to mxipupdate_zprojectdefault_a_000.provxml
Notice the "z" ahead of the project.
This trick will put the provxml after the mxipupdate_windowsliveim_1.provxml, so the messenger.lnk will have been created and the provxml will run just fine.
But he said that provxml isn't excuted at all, I'm out of ideas . Anyway, it's worth to give your idea a try.
jwzg said:
The attached .provxml will not execute. It's supposed to associate icons with folders in the start menu, but it's just not working. It is totally unmodified from the Rhodium S2 ROM. The directories are there as the initflashfiles.dat file is unmodified and the folders are in the start menu. Anyone care to help?
Click to expand...
Click to collapse
the provxml isn´t executed on my rhodium as well. but renaming to mxipupdate_zzzzprojectdefault_a_000.provxml
does work for me.
as the posters above me wrote:
the problem seems to be the messenger package which includes another *provxml file which should be prozessed BEFORE mxipupdate_projectdefault_a_000.provxml but it isn´t! also *.provxml aren´t prozessed if there´s a failure inside. when you remove a program and you don´t clear the line in the *.provxml the file would not me prozessed.
this problem is related to platformrebuilder breaking something, you can pm airxtreme for info, it seems that he solved this problem in his wonderful kitchen
steph
Provxml can be launched but they stops at the line it find a problem so it seems that it doesnt works.
Platform rebuilder can reads DSM in EVK? or just in OsK? or none?
Renaming the .provxml solved the issue. Man, the start menu looks good now! Thanks!
Great, I wouldn't think about renaming on my own . Anyway, it seems that those provxml files are processed in alphabetical order, right?
everything is alphabetical order processed in platform rebuilder based kitchens ¬¬
Mod edit: Solved
Dude!!! The sameprob here with Leo ROM... same file... going to try your tip!
kurniawan77 said:
Dude!!! The sameprob here with Leo ROM... same file... going to try your tip!
Click to expand...
Click to collapse
@kurniawan77 - Did it work for you?
Same prob here, using osKitchen Zero for HTC LEO. Already tried renaming by adding zzz in name and also tried adding the provxml in dsm. Any other suggestions? This is drving me nuts, please help.
p/s: also tried opening the provxml in internet explorer/XML notepad 2007 - no errors. Made sure there are no "<?xml version="1.0" encoding="utf-8" ?>" in the headers.
Try to replace platformrebuilder.exe with another version, that did the trick for me.
Before you ask, sorry but I'm using a private edition of platformbuilder so I can't share.
I'm using platformrebuilder.exe v.2.1.0.0
tidus18 said:
@kurniawan77 - Did it work for you?
Same prob here, using osKitchen Zero for HTC LEO. Already tried renaming by adding zzz in name and also tried adding the provxml in dsm. Any other suggestions? This is drving me nuts, please help.
p/s: also tried opening the provxml in internet explorer/XML notepad 2007 - no errors. Made sure there are no "<?xml version="1.0" encoding="utf-8" ?>" in the headers.
Click to expand...
Click to collapse
tidus18 said:
@kurniawan77 - Did it work for you?
Same prob here, using osKitchen Zero for HTC LEO. Already tried renaming by adding zzz in name and also tried adding the provxml in dsm. Any other suggestions? This is drving me nuts, please help.
p/s: also tried opening the provxml in internet explorer/XML notepad 2007 - no errors. Made sure there are no "<?xml version="1.0" encoding="utf-8" ?>" in the headers.
Click to expand...
Click to collapse
You still have problems even with oskitchen 1.31beta3? Some people reported the new DSM-based provxml order to be working fine.
Evil Provxmls....
airxtreme said:
You still have problems even with oskitchen 1.31beta3? Some people reported the new DSM-based provxml order to be working fine.
Click to expand...
Click to collapse
Hi Airxtreme - Thanks for developing the kitchen! Its really great. But i just recently moved to osK Zero from ervius. Previously in ervius i didnt even bother to add provxmls in any dsm. I dont quite understand DSM management fully, but i did add the provxmls in DSM of my ext package (ext package contains my custom icons for start menu and the provxml to add reg entries).
When i get back home, i will try to rebuild the ROM with older version of kitchen and report back. Currently im using v1.31Beta3.
p/s: i had trouble with theme provxmls as well, finally i had to put all the theme files in Operatorpkg, and put the xml entries in HTC's provxmls (the one named HTC_100) for it to work.
Laurentius26 said:
Try to replace platformrebuilder.exe with another version, that did the trick for me.
Before you ask, sorry but I'm using a private edition of platformbuilder so I can't share.
I'm using platformrebuilder.exe v.2.1.0.0
Click to expand...
Click to collapse
2.1.0.0? Then what's the version that is publically available? And can you say something about the new functions, etc.? Thanks!
tidus18 said:
Hi Airxtreme - Thanks for developing the kitchen! Its really great. But i just recently moved to osK Zero from ervius. Previously in ervius i didnt even bother to add provxmls in any dsm. I dont quite understand DSM management fully, but i did add the provxmls in DSM of my ext package (ext package contains my custom icons for start menu and the provxml to add reg entries).
When i get back home, i will try to rebuild the ROM with older version of kitchen and report back. Currently im using v1.31Beta3.
p/s: i had trouble with theme provxmls as well, finally i had to put all the theme files in Operatorpkg, and put the xml entries in HTC's provxmls (the one named HTC_100) for it to work.
Click to expand...
Click to collapse
Those having problem with provxmls where it is used to overwrite other provxmls in sys (ie: for theme settings), please try this http://forum.xda-developers.com/showpost.php?p=7038082&postcount=2477
This version of your kitchen solved all my probs. THANKS!!!!!!!!!!!!
I only tried to help make the provxml load
Bepe created the kitchen tool and knows everything about it.
Edit; a bit late but the version I use is 2.1.0.0 indeed.
cnzqy1 said:
2.1.0.0? Then what's the version that is publically available? And can you say something about the new functions, etc.? Thanks!
Click to expand...
Click to collapse
tidus18 said:
Those having problem with provxmls where it is used to overwrite other provxmls in sys (ie: for theme settings), please try this http://forum.xda-developers.com/showpost.php?p=7038082&postcount=2477
This version of your kitchen solved all my probs. THANKS!!!!!!!!!!!!
Click to expand...
Click to collapse
glad it worked out for u... been away for days... working on bugfixes... and more. v1.31b3 from worked out even better... sorry for late response
hi
can somebody please explain how to remove Certificate verification warning from stock rom for cooking by os kitchen.thanks
You have to patch the nk.exe file in the XIP Kernel.
brainmaster said:
You have to patch the nk.exe file in the XIP Kernel.
Click to expand...
Click to collapse
can you please tell me how ?
Search for cmonex's patcher. Or enable cert patching in your kitchen.
When are you getting errors? It probably has nothing to do with certificates. You may have a bad shortcut or missing files (components). I doubt it's really a cert problem. Check the shortcut path first (or the alias path in the registry).