i can see my 802.11n router running AOSP but not using any other 2.2 rom
( stock or cooked)
i reflashed my radio went thru the reboots and flashed my wimax...
then nand-restored....
no joy
are there any scripts or commands i can use to verify settings are correct?
rom ava9
recovery amon RA-1.8.0
pri-1.77_003
prl-60671
NV-1.71_003
Related
OK here is where i am - rooted my UK Voda Magic a few months ago, not realizing that i would not be able to get OTA updates as a consequence. Not a problem until now, because the donut update is just around the corner and i would like the new update when it arrives. I am on my stock Voda rom just with root access (Haykuro's method 1) and cyanogens modded recovery 1.4 installed.
So if I flashed the Crios SPL to my phone will this allow me to download OTA updates when they becomes available??? ie i would be able to get donut via OTA update.
OR is the only way i can get donut by flashing a modded ROM???
If it is the latter i have been reading and was thinking of going with nk02's mod version of cyanogens v4.04 ROM. From what ive read its the fastest most feature packed rom (Gmail, maps, b/tooth, wifi, 3g, etc) unless someone can suggest otherwise.
If the Crios SPL method works that would mean i am runnning a rooted stock rom with the ability to download/install OTA updates????
Clarification of this will me much appreciated
Ota update will unroot your phone and first boot will ovetwrite recovery 1.4 unrooted stock. Plus to complicate further, donut ota is patched so one-click root wont, forcing you down more complex process to get your root back.
Im running 4.1.11.1 with ext4 partition. Seems issues reported against 4.1.999 are for those still on ext2, so i might upgrade soon. 4.1.11 had issue that ext3 wasnt mounted as ext3 so i repartitioned with 4.
Hi guys
I am wanting to try out cyanogen custom ROM version 6 on an AT&T N1. I'm reading the below instructions and its a bit unclear to me what I am supposed to do re: the radio. Can someone assist?
- if I follow below instructions, do I end up flashing the radio?
- if so which radio firmware am I supposed to use?
- can I just do below and skip step 3, then I will end up with cyanogen w/ stock radio, and that will work fine? Note I am 850Mhz user.
Nexus one (AT&T version w/ 850Mhz 3G band) running stock FRF91. Baseband: 32.36.00.28U_4.06.00.12_7
INSTRUCTIONS:
- First time flashing CM to your Nexus (or coming from another ROM)?
1. Unlock/root your device and install Clockwork Recovery via ROM Manager or Amon_RA's recovery image
2. Do a Nandroid backup!
3. Update your radio if necessary
4. WIPE
5. Install the ROM
5. Optionally install the Google Addon
- Upgrading?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
You already have the Froyo radio so you can skip step 3.
These links should help you: http://forum.xda-developers.com/showthread.php?t=618768 especially for getting adb set up and flashing a custom recovery.
I'm an att user, as of froyo both tmo and att versions of the phone use the same radio. So as long as you are coming from a stock froyo build with the new radio you can flash any froyo rom without worrying about the radio... including cm 6 (which I'm currently using without issue).
Edit: it looks as though you have the same radio as me if the baseband version in your post is your phones. so you should be good.
As I had some difficulties putting together the guides out there, for the ps3 hack, and used quite an amount of time, figuring this out.
I finally managed to prepare my phone for this, so I though I would share
1st you need the right radio and SPL (HBOOT) and custom recovery
2nd you need to flash Cyanogen mod 6
3rd you need to flash EIB1 port
and at last you can flash the PSfreedom mod kernel​
The guide:
1. the goal is to obtain 3.22 radio and 1.33 SPL and custom recovery. Use this tool
http://forum.xda-developers.com/showthread.php?t=824435
1.1 It's important you don't have radio/SPL mismatch in order to use this tool. If you have 6.35 radio, you need to flash 1.76 SPL first.
1.2 After this you can flash old files (this flashes both 3.22 radio, 1.33 SPL and custom recovery.
2. Now, you can go on and flash cyanogen mod 6.0.0. I used the froyo redux modded, but i recommend using this clean install though
http://forum.cyanogenmod.com/files/category/3-htc-dream-htc-magic/
2.1 flash it, by using custom recovery. get into recovery by turning of phone, and press and hold "home" + "power" buttons.
2.2 1st you ned to wipe "data/factory reset" and "cache" (i wiped dalvik as well)
2.3 go back, and choose "flash zip from sd card" and locate the zip file.
2.4 reboot to make sure everything is fine
3. Now you can flash the EBI1 port, from here, for the 6.0.0 version, via the custom recovery
http://forum.xda-developers.com/showthread.php?t=592377
3.1 reboot
4. Finally you can flash the PSfreedom kernel. get it from here
http://psfreedom.com/wiki/HTC_Magic_32A
4.1 reboot
Finally, you are ready to hack your ps3.
For further instructions follow the already made guide for PSfreedom here
http://psfreedom.com/wiki/index.php?title=Using_psfreedom
feel free to comment, so we can make this guide as accurate as possible, in case I should have forgot something or written something unclear
Good luck!
Why don't do you just flash ps3 custom firmware?
The 3.55 have been out for quite some time now.
I did that long time ago and it's working perfectly.
The usb-dongle hack is to annoying.
For your guide to work, you must have 1 requirement at the first step.
The device needs an eng spl for it to work.
The rest seems all ok :0)
Anyway, thank you for making a contribution.
Heh... yeah I found that on youtube today (CWF)... haven't gotten it to work yet though... but it's only transfering the game to internal though, so I guess it doesn't matter which method I use, dongle or no dongle...
but upgraded to CFW 3.55 too now.
Ever since i've updated to ics my wifi has been terrible if I'm not in the same room as my router I get 1 bar so I wanna go back to honeycomb. I have civato's latest rom for ics idk if that matters or not and I know it's the ics that's messing up my tab because my brother has the same tab but he hasnt downloaded any updates and his wifi is fine.
rcraig617 said:
Ever since i've updated to ics my wifi has been terrible if I'm not in the same room as my router I get 1 bar so I wanna go back to honeycomb. I have civato's latest rom for ics idk if that matters or not and I know it's the ics that's messing up my tab because my brother has the same tab but he hasnt downloaded any updates and his wifi is fine.
Click to expand...
Click to collapse
3.2.1 rooted roms with the stock Acer kernel:
These will work with the new unlocked ics recovery
* Wipe your tab (you can use titanium if you need to backup app data) in recovery
* flash the rooted stock rom in recovery
* reboot
(I've tested this with my HC3.2.1 rom here: http://forum.xda-developers.com/showthread.php?t=1265847)
other HC roms with custom kernels (non-acer) or older kernels
Here you need the old HC3.0.1 bootloader/recovery before you can install, and will need to re-install the unlocked bootloader if you return to an ics rom.
http://forum.xda-developers.com/showthread.php?t=1622425
Has instructions for returning to the HC bootloader/recovery as well as going to the unlocked ics ones
Then just wipe and install as normal.
**note when downgrading system apps between android releases you must factory reset.. most of our recoveries leave the sdcard data intact (of course you ought to take a full nandroid backup of your current rom so if it doesn't work you can re-install the ics bootloader if needed and restore your current system)
A friend of mine wanted to change the stock rom on his old tmobile MyTouch 4G to CM7.2
It is currently running the latest 2.3.4 (hboot_0.89.0007, radio 12.62.60.27_26.13.04.19), I unlocked the phone following the steps from HTC Dev website. And they explained that unlocking is enough to flash custom rom since it enabled write access to recovery, system and boot http://www.htcdev.com/bootloader/about_unlock_process.
I was able to flash and run both TWRP and CWM (twrp2.2.2.1-glacier-recovery & recovery-clockwork-touch-5.8.1.0-glacier) adn used them to flash CM7.2 stable and the latest nightly and some other custom ROMs i found on the developers forum at XDA, however, not of them do boot. The phone will get stock at the first screen showing Tmobile and myTouch 4g logo.
I followed many threads/steps that recommended downgrading to stock froyo first to turn security off (S-OFF) but it won't let me since it is older version, then some says to downgrade the radio first, but that is also not possible with S-ON and i get signature error. i tried doing it from the sd-card using the file name "PD15IMG.zip" for the stock rom but didn't work neither from the fastboot rebootRUU thingy.
From the recovery i wiped every thing even system, then checked it to make sure it is empty, flashed CM7.2 and mounted system and there are the files as they should be but it won't boot, and "adb devices" won't show anything so i cannot see the log. which means it didn't even start.
Am I missing something trivial?
* BTW, i had to lock the bootloader again to flash the stock 2.3.4 back, but I have the unlock token "Unlock_code.bin" and I can unlock it again if someone knows the answer to this problem