Related
Hi everyone,
I need help with android on my HD2. I put on my HD2 the Android 2.2 OS but there is no sounds and calls have robot like sounds (can't even make out words that are spoken). I have been having the same problem no matter what I do and how many times I redo the installation process. I even installed HSPL3 and went from a 2.10 radio to a 2.08 radio still the problem persist. And yes i did tap on CLRCAD before taping on HaRET. Someone please help...
The Robot Voice is a known issue. However, some cooks have fixed the issue in their custom ROM's. Why don't you check them out.
http://forum.xda-developers.com/forumdisplay.php?f=624
gaarry said:
The Robot Voice is a known issue. However, some cooks have fixed the issue in their custom ROM's. Why don't you check them out.
http://forum.xda-developers.com/forumdisplay.php?f=624
Click to expand...
Click to collapse
x2.
certain rom+radio combinations are better than others in terms voice call quality. e.g., chucky rom+latest radio works good with mattc's froyo sense, miri's rom seems to work well with darkstone's builds, etc..
I went through most of the threads of there but in vain
ryan562 said:
x2.
certain rom+radio combinations are better than others in terms voice call quality. e.g., chucky rom+latest radio works good with mattc's froyo sense, miri's rom seems to work well with darkstone's builds, etc..
Click to expand...
Click to collapse
well that's what i though therefore tried to use darkstone's builds with miri's rom but to no vails
Daftdog2002 said:
well that's what i though therefore tried to use darkstone's builds with miri's rom but to no vails
Click to expand...
Click to collapse
You just have to experiment, or look around in user's signatures, and see what build combo's they are using.
i've tried this so many times to no avail, the sound is very low plus i get tke robot voice and after the second call it does not sound anymore. Also there are no ring tones, everything works but the audio. This is what I'm running:
Froyo Stone with sense, my radio is 2.10.50.26 everything is in the SD card, also how can I access the sd card? Thank you so much for any help you cab give me.
well ill give you my tip on how to resolve your problems. i did this to my phone and now i can run android FLAWLESSLY on my HD2.
1.go to tmobiles site and download the latest STOCK rom for your HD2.
2. run the program to install it so that you have the newest stock rom on your phone.
3. install HSPL 2.08 and MAKE SURE its HSPL and not SPL.
4.after installing that, install a custom WM rom of your choice(im using the WM bare bones by NRGZ28)
5.then install a new RADIO rom( i am using the Leo_RADIO_2.12.50.02_2)
6.download and install the ANDROID ROM of your choice(i am using MATTC's NeXus one 2.2 OTA operating system)
7. reboot after you finish installing the android and it should work great! i havent had any robot voices/SoD or screen freezes and i have been using it for 4 days now and i usually get about 12-14 hours of use out of a full charge.
let me know how that works!
This has been talked about MANY times already. Android on the HD 2 is kinda like a learning a new recipe, you have to try different things till you find something that works for you. Did you know there is a whole forum dedicated to android on the HD 2? Really there is It is HERE
It does not work with all ROMS. You have to find a ROM that is compatible with Android. Omega's latest ROM is compatible.
Hey man you are a life saver. Tried what you did and my HD2 is working. The only thing I have found is when I hook up my bluetooth headset it somehow corrupts everything and i have to reinstall the rom to get everthing else working. Thanks again
kyleshaffer21 said:
well ill give you my tip on how to resolve your problems. i did this to my phone and now i can run android FLAWLESSLY on my HD2.
1.go to tmobiles site and download the latest STOCK rom for your HD2.
2. run the program to install it so that you have the newest stock rom on your phone.
3. install HSPL 2.08 and MAKE SURE its HSPL and not SPL.
4.after installing that, install a custom WM rom of your choice(im using the WM bare bones by NRGZ28)
5.then install a new RADIO rom( i am using the Leo_RADIO_2.12.50.02_2)
6.download and install the ANDROID ROM of your choice(i am using MATTC's NeXus one 2.2 OTA operating system)
7. reboot after you finish installing the android and it should work great! i havent had any robot voices/SoD or screen freezes and i have been using it for 4 days now and i usually get about 12-14 hours of use out of a full charge.
let me know how that works!
Click to expand...
Click to collapse
+1
Few differences.
I have chuckyrom light and froyostone (8/7/2010) build.
Its a t-mobile phone.
When I had the 2.10 radio, the build froze constantly. I couldn't use it. As soon as I changed to the 2.12 radio mentioned above, I haven't had a problem since.
I'm going on nearly 2 weeks and it has performed flawlessly.
Sent from my HTC Desire using XDA App
same here
I have same issue with robot woice, just like from videoclip Black Eyed Peas
I think the combination one month old Duttys ROM and Foryostone2.2 Android image is the reason. Radio ROM is the latest. Therefore I think every chefs WM ROMs has to be modified to be compatible with currend Android port developement.
Also I have very fast music player, everything sounds like Smurfs and battery drain is very extrem.
But battery drain is common for every Android ports, as I can see at forum, so until this issue will be resloved it is just for fun not for the real usage I hope developers who spend a lot of time with porting will have luck with that soon
Hi!
Reason I'm asking is I'm running the mdeejay_froyo_sense_v2.1_ppp build with radio 2_10_50_08_2 and stock norwegian 1.66 ROM - and everything seems to run just fine (had it for several days now)
So, then I wonder why it's recommended to use a custom rom? Do the android build have any to do with what wm rom you use? Or could it be this build runs so smooth for me because i'm using a class 4 card?
Chivas610 said:
Hi!
Reason I'm asking is I'm running the mdeejay_froyo_sense_v2.1_ppp build with radio 2_10_50_08_2 and stock norwegian 1.66 ROM - and everything seems to run just fine (had it for several days now)
So, then I wonder why it's recommended to use a custom rom? Do the android build have any to do with what wm rom you use? Or could it be this build runs so smooth for me because i'm using a class 4 card?
Click to expand...
Click to collapse
I think that the Android builds use WM differently.
My phone was a stock phone, and i tried to boot the Darkstone Sense android. This did not go very well. WM locked up, and all i could do in WM was some basic stuff. All 3'rd part apps did not work. I could not install anyting. So i changed ROM and Radio and everything now works well. So, i got hold of another stock HD2, tried the same thing, and the same happened once again.
Chivas610 said:
Hi!
Reason I'm asking is I'm running the mdeejay_froyo_sense_v2.1_ppp build with radio 2_10_50_08_2 and stock norwegian 1.66 ROM - and everything seems to run just fine (had it for several days now)
So, then I wonder why it's recommended to use a custom rom? Do the android build have any to do with what wm rom you use? Or could it be this build runs so smooth for me because i'm using a class 4 card?
Click to expand...
Click to collapse
It's just recommended because the custom ROM' are more customized to run Android without problems, but you can run android with any rom even stock as long as you have the proper Radio
The custom WM roms meant for android boot very quickly, are small files, and have custom boot loaders built in. All of this is at the expense of windows mobile functionality.
I believe that WM rom has little impact on the actual performance of android and only aids in how quickly you go from device off to booted android. All you really NEED is the right radio.
Oky, thnx...well, I went on and installed a custom rom anyway (think it was about time anyhow ), and now running the Desire HD build - running great, so guess my system/radio is what it should be now
i have been running android on my hd2 for almost 3 months and i have yet to put a custom rom on my phone all i did was put a hard spl and change radio that was it android runs fine never had any real problems like everyone else is having and if i did i changed the build
I would recommend a Custom ROM thats Android Friendly like that any issues that WM might cause to Android are gone...
BUT,
You can still Run android on top of a Stock Build...
I had android once with a Stock ROM from T-Mobile and it worked just as good as a custom one...Just Depends on your luck of the Draw...
The latest Official ROM from T Mobile caused sound issues on my Android Build so i kicked it
Im also on Stock rom, happy with with performance and stability
Gihanfx said:
Im also on Stock rom, happy with with performance and stability
Click to expand...
Click to collapse
Hi Gihanfx,
How is the battery life for you with the stock rom and radio?
I saw some other posts saying the android is speedy an stable with the latest stock rom and radio, but the battery life actually sucks.
Thank you
Hello.
I have a HTC HD2, that I have been changing ROM's on for a while now.
Can't really find what I'm lokking for.
Is it possible to run Android on HTC HD2 without the need of WM ??
Hope that someone have a feedback on this....
tegbakke said:
Hello.
I have a HTC HD2, that I have been changing ROM's on for a while now.
Can't really find what I'm lokking for.
Is it possible to run Android on HTC HD2 without the need of WM ??
Hope that someone have a feedback on this....
Click to expand...
Click to collapse
No not at this stage. I can recommend Miri's ROMs for android compatibility but havn't tried many others but there is currently no way to run Android on our HD2s without first booting into WM.
There are also a few ROM builds (see the HD2 android development thread) that have a lot cut out of them for faster operation/boot and there's also the option of using one of the developed Android loaders (boots WM then Android for you).
Not possible right now. The devs are working on a NAND version which will make it possible, but it's not available yet.
Highly recommend Energy's Titanium rom, its very lightweight and is perfect if you reboot your phone and want to get back to android fast.
I use ChuckyDroidROM as Winmo build (very low on all recourses), and put shubCRAFT 1.5 or mattc Froyo 1.7 on top of it.
Using the little boot app in the ROM it runs great now
Almost dont notice its a layer
Its cool to have 2 OS on 1 phone, why not?
Question seems to be answered. Thread closed.
Hi,
I have successfully downloaded and lunched described in the subject version of Android. I have launched Android (previously launching clrcad) and everything worked fine till I have noticed that in the random period of time my phone is rebooting. It looks like you take out battery and put it again. It is happening regarding this latest version only. When I had froyo sense 1.7 nothing like that ever happen on WM also. I have upgraded my ROM and radio to the versions described below but the problem still exists. I will be very gratefull for any ideas what is the reason of such behaviour.
kernel 2.6.13.15
SPL-2.08,
OS version 5.2.219
Manila Version 2.5.2
ROM version 3.14 (recently upgraded)
Radio 2.15
Er, you might be better off asking in the Touch HD2 Anroid forum; this is the general Android Development forum.... ;p
I tought that maby some of you met kind of problem and know solution.
Ok, I have a Branded ATT Aria, non rooted.
I want know the pro's cons' of rooting, or even flashing a new rom, the risks, and if it's possible to take me ADW launcher settings/wallpaper/widgets/apps and back them up to a file, to restore once rooted/re-rommed\?
I love my setup now, just want more memory, faster snappier response, and no more att apps.
I flashed my HTC Pure (att branded) unlocked it to any carrier, and rommed with
HTC-Topaz Upgraded CR192 Mozart
Windows 6.5 Proffesional
CE OS 5.2.21685 (Build 21685.5.3.10) Beta
Processor: MSM7201A-528MHZ
Ram: 288 MB
Flash Mem: 512
DatBus:32 bits
Storage:247.71MB
res: 480X800
I turn off sense 2.5, I run SPB Mobile Shell 3.5.5, which is laggy.
I run XD Android on it, FROX4 (after turning mobile shell off)
and Android seems to run faster/smoother, but with some serious bugs.
(I.e no camera, call in/out issues, not recognizing SD card, etc etc etc)
How come my Winmo Phone runs android on top of al that smoother than the base program? And why can I get Froyo on a WINMO device and not my dedicated android phone?
Why why why why why why does ATT stick their hands into EVERYTHING?!?!?!
Also resource for a free carrier unlock code for my aria? Had to lie about over sea's traveling to get the one for my Pure, I'm sure ATT only buys that one once in a while...
How Can I get my Aria to Run, Either a newer version of android (preferably Froyo/gingerbread)
88crows said:
Ok, I have a Branded ATT Aria, non rooted.
I want know the pro's cons' of rooting, or even flashing a new rom, the risks, and if it's possible to take me ADW launcher settings/wallpaper/widgets/apps and back them up to a file, to restore once rooted/re-rommed\?
Click to expand...
Click to collapse
It all starts with rooting your phone. BTW, the act of rooting your phone will not wipe out any settings or programs you have installed on the stock ROM. It just provides the ability for some programs to run at an elevated privilege to access the phone. Once you are rooted, you can download and use my My Backup Root to save your ADW settings and installed apps so that you can restore them when you flash a new ROM.
88crows said:
How come my Winmo Phone runs android on top of al that smoother than the base program? And why can I get Froyo on a WINMO device and not my dedicated android phone?
Click to expand...
Click to collapse
Once you are rooted you have 2 flavors of Froyo that you can install on your Aria. The Liberated Aria ROM is the HTC Sense version of Froyo 2.2 but does not contain any of the AT&T bloatware. This ROM was created from the European version of the Aria (Gratia). Your second choice is CyanogenMod (CM) 6.1 which is based on the Android Open Source Project (AOSP) and is pretty much pure Android 2.2 and what you will find on the Nexus One with some enhancements. The CM series is also developing CM 7 which is AOSP Gingerbread, so you will also have that to look forward to.
the devs of this forum have made rooting your phone as safe and easy as possible.
you can get an app that can back up your programs, such as titanium backup.
as far as rooting your aria goes, start here. after that, simply choose your favorite rom (from your post, i take it you enjoy the htc sense flavor of android, so i would suggest this rom.
good luck.
Okay,
Heres where I'm at, I want to root my aria (I know I haven't gotten the balls up yet) But I also don't want to do anything I can't reverse. And while it might seem easy to some, they probably don't bake like a pastry chef.
I do enjoy the sense UI, however I also really like ADW, which is very clean. I like clean and easy to change. I wanna try ADWex however I cannot justify buying it if I don't like it as much, and my aria cant run it smoothly. I feel like I never know if my aria is running to full potential with all that ATT bs, bloatware, and Sense(and htc devout programs) seem to have, a persistance inside the system.
So rooting my Aria will ne needed to get it up to speed, freeing up a load of memory, and CPU usage. Right?
Two: Can I really root, XD android? Thats loaded onto my winmo pure? I'm not really sure if I understand fully how that works. If I'm mistaken and it is already, then nvm.
Also Is there a real way to turn off windows before booting on android and how do I make it boot xdandroid from being off?
Are live wallpapers able to be used on either my aria or pure with xd android?
Can't make it happen on my own tried a few things but nothing seems to make them show up to use, in the wallpaper option of adw(both) or sense(aria)
Thanks for all your help so far!
Edit: Would Z4 work on xdandroid?
Any help on the live wallpaper? With just the cooked rom, running sense 2.5 (can't remember the name of the rom right off.. something from here at xda, think its an energy rom.) I can run live wallpapers, however I cannot seem to get one to run in spb mobile shell or in xdandroid, why?