Hello,
First this is my env :
- ROM Winmo : ROM Pyrana V-H-11.3
- ROM radio : ROM 2_12_50_02_2
- Carte SD : 4Go
- ROM Android : FroyoStone_Sense_V3.1
My problem :
When I boot the rom android (manually in winmo), after few hours (about 9, 10 hours), the internet connection fail down.
Phone calls woks fine but not internet acces
I can do this : parameters -> com manager -> uncheck mobile network -> re-check mobile network
after that The internet connection works during few minutes and fail down again.
Thanks to give me some tips or link to solve my problem.
I don't know if that may cause your problem, but did you check if your phone is in airplane mode before you boot android? It seems a little strange, because it works for 9 or 10 hours.. but check this anyway.
Another problem might be your radio, but I think that won't cause your signal loss after such a long time. But just to be sure, why don't you flash another radio?
Cheers
JanssoN,
Thanks, I'm not in airplane mode under Winmo.
Which radio version can I install insted of mine ?
I was certain to have the last one and the best...
Thanks
karlichon said:
JanssoN,
Thanks, I'm not in airplane mode under Winmo.
Which radio version can I install insted of mine ?
I was certain to have the last one and the best...
Thanks
Click to expand...
Click to collapse
No, there are two newer ones.
Here is 2.15 (i think the latest, dunno if it works good with android).
Radio 2.15
And this is an older one 2.14, but I've flashed this one and I have to say it's very good. The signal is perfect and the battery drain is about 7mA in standby.
Radio 2.14 (take the one on the top).
Edit: I've just found another tweak which maybe will work:
Try this out
Oh my god 2.15 !
Flashed !
I'm waiting to verify the stability.
I'll come back tomorrow to give you the result !
Thanks a lot.
karlichon said:
Oh my god 2.15 !
Flashed !
I'm waiting to verify the stability.
I'll come back tomorrow to give you the result !
Thanks a lot.
Click to expand...
Click to collapse
No problem. If this issue appears again try the tweak I posted above.
- J
Hello,
I come back after a week.
The new ROM 2.15 don't change anything. I regulary loose internet connection after few hours.
I must disconnect and reconnect internet connection in settings to reactivate it.
Thanks a lot if you have some tests to do.
karlichon said:
Hello,
I come back after a week.
The new ROM 2.15 don't change anything. I regulary loose internet connection after few hours.
I must disconnect and reconnect internet connection in settings to reactivate it.
Thanks a lot if you have some tests to do.
Click to expand...
Click to collapse
In winmo turn phone signal off then boot Android worked for me not dropped in over a day
Sent from my HTC HD2 using XDA App
You could also try this..
Cheers
hi OP, did u find a working solution? i'm expereinceing the same problem
I have the same issue. After a few hours my wifi shows still connected, but there is no access the network. I have to stop and start wifi to get it to work again. Any solutions??
Related
I have an unlocked Cingular 8525 on TMOBILE. I have TZONES plan. I have it set to check my gmail/hotmail every 60minutes....also have NewsBreak to check RSS feeds 2 times a day.
The problem is that my connection stays on once it is started on its own. Since phone is in my pocket i cant tell till i take it out and then i have to manually close the connection.
So is there a setting or .cab or app to close innactive connection? Anything that wont affect me while im browsing or chatting MSN.
I tried search but could not find the answer, also i suck at searching...sorry.
Thanks in advance!
adam we need a bit more info.
Please could you add the info about your device (ROM, Radio version etc...) into your sig, and also fill out your country and carrier in your profile.
An updated radio stack might fix this.
Having a cab that would turn off inactive connections would be very useful. Hope somebody finds the answer, same thing occurs with my device, I have to manually turn off after finished using. It is possible that the connection will terminate on my device when inactive, I have never trusted it to happen. If it is possible with my current radio is there a way to set the amount of time till disconnect. Maybe you know the answer Mrvanx.
With Comm Mgr Pro you can set to close idle connections for a X quantity of senconds..... (this is, connections that havent data traffic during x seconds)
How can i check my ROM and Radio version? Ive only had my phone for 2 weeks.
The apps connect on their own thru my TZONES GPRS data plan. When they are done getting new mails/rss feeds the connections remains open untill i manualy close it....this eats up my battery.
Where can i get Comm Mgr Pro? HOw much?
danielherrero said:
With Comm Mgr Pro you can set to close idle connections for a X quantity of senconds..... (this is, connections that havent data traffic during x seconds)
Click to expand...
Click to collapse
Thanks for the info, I haven't put that on my device as of yet, just waiting to see some additional feedback. I just looked at the post and it seems that there is plenty to read there now, I will read over the course of the day and likely install. Will let you know if I find any issues.
o0adam0o said:
How can i check my ROM and Radio version? Ive only had my phone for 2 weeks.
The apps connect on their own thru my TZONES GPRS data plan. When they are done getting new mails/rss feeds the connections remains open untill i manualy close it....this eats up my battery.
Where can i get Comm Mgr Pro? HOw much?
Click to expand...
Click to collapse
Free
Discuss from here http://forum.xda-developers.com/showthread.php?t=299070
Download from www.commmgrpro.com
Here is the thread for comm manager pro.
http://forum.xda-developers.com/showthread.php?t=299070&highlight=comm+mgr+pro
Gracias Daniel!
Hopefuly this solves my issue and i dont have to close my connection manualy many times a day!
o0adam0o said:
Gracias Daniel!
Hopefuly this solves my issue and i dont have to close my connection manualy many times a day!
Click to expand...
Click to collapse
My connection is on 24/7 (alot of the time in UMTS mode) and i havent had to charge it up yet since upgrading to the new radio.
GPRS might be attached but its not ALWAYS transferring.
mrvanx said:
My connection is on 24/7 (alot of the time in UMTS mode) and i havent had to charge it up yet since upgrading to the new radio.
GPRS might be attached but its not ALWAYS transferring.
Click to expand...
Click to collapse
Good point mrvanx, i always thought the radio was just for wifi
Im going to look into what radio i have and whats the newest one i can upgrade to....and HOW to do it...lol Im a newbie for PPC phones....Ive had 3
S60 Nokias before my 2 week old Hermes. So i got ALOT to learn.
o0adam0o said:
Good point mrvanx, i always thought the radio was just for wifi
Im going to look into what radio i have and whats the newest one i can upgrade to....and HOW to do it...lol Im a newbie for PPC phones....Ive had 3
S60 Nokias before my 2 week old Hermes. So i got ALOT to learn.
Click to expand...
Click to collapse
If you wait for about 10 mins im updating my "radio upgrade guide".
The radio stack just controls the phone and GPRS stuff, wifi and BT are part of the OS.
BTW the latest version (1.40.30.00) works great, no complaints of battery drain, shogunmark has had his device on for over a day and is around 50% on battery life.
While you are waiting you might want to safeguard your device against a potential Brick (knackered device) by Flashing HardSPL to your device
If connection is staying on like mine did, it's worth checking data transfer icon is still active on Comm Manager
After flashing with a new ROM etc..
When I go into communications, and tap on wifi.....it turns on for a sec and then turns back off. Any suggestions?
Here is what I have done so far.....
Started with: Radio v. 1.39.00, ROM V. 2.13.656.2, Bootloader 1.2
Went to bootloader 2.40(via Hard-SPL-MF.exe), Scrosler's Titan ROM 3.26 w/touchflow. and then Radio 3.42.30.
Thank you in advance for any suggestions or solutions.
Reply With Quote
upsett3r said:
After flashing with a new ROM etc..
When I go into communications, and tap on wifi.....it turns on for a sec and then turns back off. Any suggestions?
Click to expand...
Click to collapse
Try the hardware switch on the side of the unit. The software switch was never able to work under most ROMs that I have ever used.
I toggled that (WiFi switch), and it does the same thing for me.
Should I try another ROM or radio version? I don't want to do a bunch of flashing.......anyone know a good firmware version (and radio v.) with everything working and ready to go in terms of functionality? I don't mind putting all the carrier info in etc, just want all the radios to work afterwards (wifi, eV(cellular data), cell, bluetooth, IR)
Never heard of the problem. I say reflash because something happened.
Changed the battery power option under wireless to best performance.....everything works now
That's odd behavior. Post if it happens again.
upsett3r said:
Changed the battery power option under wireless to best performance.....everything works now
Click to expand...
Click to collapse
When I use the ppckitchen my wifi refueses to work. I'm actually about to reflash it right now to DCD to see if it fixes it
Same Problem Here
The Switch seems to be malfunctioning...WHen I turn it off, it turns on the software for a second, then shuts off. WHen I turn it in the same thing happens. Really weird.
THis happened BOTH TIMES i reloaded the ROM.
im using the Kaiser Comm Manager(10 Buttons), and on it it always appears that the wifi is turned off, but functions fine with the switch
upsett3r said:
After flashing with a new ROM etc..
When I go into communications, and tap on wifi.....it turns on for a sec and then turns back off. Any suggestions?
Click to expand...
Click to collapse
i have the exact same problem since a couple of month and i cant seem to find a fix for that. I dont even know if the problem is software on hardware related.
i have used dcd 3.2.6 and 4.1.2
and im currently running ryan 2.0 i think wm6.1
maybe i should try wm 6.5
the only thing i know is that i would REALLY like my wifi to work :'(
lebulbe said:
i have the exact same problem since a couple of month and i cant seem to find a fix for that. I dont even know if the problem is software on hardware related.
i have used dcd 3.2.6 and 4.1.2
and im currently running ryan 2.0 i think wm6.1
maybe i should try wm 6.5
the only thing i know is that i would REALLY like my wifi to work :'(
Click to expand...
Click to collapse
i am using the ryan 2.0 wm6.1 and my wifi does not work either, didnt work in wm6.5 and no available memory in 6.5 either so save your time.
my phone was a mix of 2 broken moguls, the only thing i dont have working is vibrate and wifi
cturnbull802 said:
i am using the ryan 2.0 wm6.1 and my wifi does not work either, didnt work in wm6.5 and no available memory in 6.5 either so save your time.
my phone was a mix of 2 broken moguls, the only thing i dont have working is vibrate and wifi
Click to expand...
Click to collapse
DO you see a MAC address in the WLAN advanced settings?
If not, you just need to write a new MAC address and your WIFI will work, or so I have heard.
so... how do we enter in a MAC address if it is missing?
Anyone?
guys
theres no fix take it to sprint and they will replace it happen to me twice
Hi every body,
My Prophet is warming up itself, battery is being consumed very quickly, wifi doesn't turn on.
It seems wifi problem created by wm 6.1, allthough it worked fine 1 day after updating my prophet wm5 to wm 6.1.
I have tried with wm5 again, and it doesnt get warm untill I turn on the wifi manually, but with wm6.1 it gets warm from the boot, no need to turn on the wifi( if I turn off the wifi by registry tweek, it doesn't get warmed).
I have tried with most of the available roms(also radio roms) here, same problem, but definitely it's wifi was great before updating to wm6.1.
Can any one please help me in this situation?
Will be glad if you can.
With thanks.
try this ROM
hello..
i have the same problem as you are before and since i want to help you better try what i did..
i presumed that you already had HardSPL'ed your device if not follow this link...
http://forum.xda-developers.com/showthread.php?t=350033 if you cant download the files on this link try this one :
http://forum.xda-developers.com/showthread.php?t=310452
and heres the ROM that im using from Cloudyfa ofc credits to him/her!
http://forum.xda-developers.com/showthread.php?t=394991
wifi works well based on my experience the only problem is BT < when you try to receive a file from another device but heres the tweak for that.
using a simple registry edit tool..
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"ObexServiceMask"=dword:3
"IsEnabled"=dword:1
btw the radio rom im using is the very recent one.. get it from here:
Prophet_G3_G4_RadioRom_v2.69.21.exe
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_List
hope this helps...
my Qtek S200 is working like a charm now...
WowWow~~~
you are an expert now.........
nishaon said:
Hi every body,
My Prophet is warming up itself, battery is being consumed very quickly, wifi doesn't turn on.
It seems wifi problem created by wm 6.1, allthough it worked fine 1 day after updating my prophet wm5 to wm 6.1.
I have tried with wm5 again, and it doesnt get warm untill I turn on the wifi manually, but with wm6.1 it gets warm from the boot, no need to turn on the wifi( if I turn off the wifi by registry tweek, it doesn't get warmed).
I have tried with most of the available roms(also radio roms) here, same problem, but definitely it's wifi was great before updating to wm6.1.
Can any one please help me in this situation?
Will be glad if you can.
With thanks.
Click to expand...
Click to collapse
Did you ever get your problem fixed? am having the same problem but I belive its a hardware problem I have not found a solution as yet but can anyone tell me how to enable WiFi in the Regestry thanks
After doing a Hard Flash for the first time from 1.43 to 148 and rebooting my HD2. Within several minutes my reception speed would change from 3G to GPRS and back again while on the go, this has never happen before and was wondering is there a way to have consistent 3G speed/reception or was there a fault during my flash?
Any suggestions or help would most helpful.
HD2 on T-Mobile UK.
umbrellaman08 said:
After doing a Hard Flash for the first time from 1.43 to 148 and rebooting my HD2. Within several minutes my reception speed would change from 3G to GPRS and back again while on the go, this has never happen before and was wondering is there a way to have consistent 3G speed/reception or was there a fault during my flash?
Any suggestions or help would most helpful.
HD2 on T-Mobile UK.
Click to expand...
Click to collapse
Did you flash with SSPL / Gold card or with the HDSPL in-tacked?
EITHER WAY:
Press Phone Key>Options>GSM/UMTS Services:
Here select Band....then, "Get Settings"
The first tab should say GSM. Drop down menu option you want is WCDMA. This will force 3G all the time. However I don't recommend this setting as this will consume more battery.
Leaving it in 2G saves more battery and voice quality doesn't change....
hi,
maybe you flashed the radio part of the rom also, when you flash from 1.43 to 1.48?. im not sure, but you should check out this htc update, and try it. its a replacement for the radio portion of your rom only, and maybe fixing your problems. my singnal strengh has stoped to swing between full and no bars, and i have full bars most of the time, with this update.
regards mad.
madbird said:
hi,
maybe you flashed the radio part of the rom also, when you flash from 1.43 to 1.48?. im not sure, but you should read here about this htc update a try. its a replacement for the radio portin of your rom only, and maybe fixing your problems.
regards mad.
Click to expand...
Click to collapse
Stock Roms include the Radio so if there was a change between one stock and the other then a change will occur...
There is nothing wrong with the radio band switching automatically though so unless you have bad reception, everything should be fine.
band27 said:
EITHER WAY:
Press Phone Key>Options>GSM/UMTS Services:
Here select Band....then, "Get Settings"
The first tab should say GSM. Drop down menu option you want is WCDMA. This will force 3G all the time. However I don't recommend this setting as this will consume more battery.
Leaving it in 2G saves more battery and voice quality doesn't change....
Click to expand...
Click to collapse
You're a star, it works now plus it has enabled some app's that wasn't connecting before like the twitter app. Many thanks for your help guys!
umbrellaman08 said:
You're a star, it works now plus it has enabled some app's that wasn't connecting before like the twitter app. Many thanks for your help guys!
Click to expand...
Click to collapse
You are so welcome, glad to know I could help..
band27 said:
Stock Roms include the Radio so if there was a change between one stock and the other then a change will occur...
There is nothing wrong with the radio band switching automatically though so unless you have bad reception, everything should be fine.
Click to expand...
Click to collapse
ah ok so im in 'the wrong film' . and again i learnd somthing from this great forum.
mad
so i have am htc leo , enrgy rom, radio 2.15.50.14 rom version 27.dec.2010 wwe,
i can't make my bluetooth work or wifi in normal rage , bluetooth works only within 5-10 cm no more and wifi... 30-40 cm ,it sais that cannot find device/ network etc.. i'm from romania, and some dude told me taht i can't do anything because i have a t-mobile ... true? my batery life and orange internet conection is greant ,signal also, no problem with the phone at all just this ones.. but enought to regret buying it i never tested with stock rom....
sory for my bad english .... if u have a clue what to do.... please help
Not sure if I can offer a lot of help here but just to be sure you have checked all of your settings haven't you? Did you you flash the ROM to the phone or was it on the phone when you got the phone?
T-Macgnolia said:
Not sure if I can offer a lot of help here but just to be sure you have checked all of your settings haven't you? Did you you flash the ROM to the phone or was it on the phone when you got the phone?
Click to expand...
Click to collapse
i bought it with an older energy, ies i checked all options ... the problem is the range ... it works just fine when is near (5-10 cm) for example to send a video i need the other phone on top of mine if i lift it at a certain point stops if i let it dows the transfer continues... a simple question would be the radio version affects also wifi and bluetooth ? could be a problem form wrog instal a rom from old user ?
BladeLove4Hate said:
i bought it with an older energy, ies i checked all options ... the problem is the range ... it works just fine when is near (5-10 cm) for example to send a video i need the other phone on top of mine if i lift it at a certain point stops if i let it dows the transfer continues... a simple question would be the radio version affects also wifi and bluetooth ? could be a problem form wrog instal a rom from old user ?
Click to expand...
Click to collapse
AsFor your question yes the radio does control WiFi and Bluetooth and maybe a different radio version would help you out. But be aware if you have a T-Mobile HD2 you can not flash a 2.04.50.zz, 2.05.50.XDA, or any x.xx.51.xx radio to they will brick a TMOUS HD2. Go to the HTC HD2 Master Radio Thread to download different radio versions. Here is a link to it.
http://forum.xda-developers.com/showthread.php?t=611787
Also you can try doing a hard reset of the HD2 by holding down the volume up and down button while powering on your HD2 and it will bring cupcake stern with instructions on it. Just follow the instructions on the screencto reset the HD2. Make sure to use Microsoft My Phone or a equivalent app to back up you personal info before you hard reset your HD2.
sounds to me like a hardware problem. this is because (i think) the hd2 uses the same antenna and/or chipset for bluetooth+wifi. i remember reading some threads in which people posted the exact same symptoms as the OP and the problem turned out to be some loose/broken antenna wire inside the device.