Hi all.
I wa trying to update radio on my magic 32a.
I went in recovery mode and then apply zip file without renaming it, from recovery;
zip file name is update-hboot-1.33.2010-signed.zip
Here are operation that I have done:
copy file mentioned above into SD card
go in fastboot mode
find device
boot my recovery image from fastboot (I have not flashed permanently recoevry image on my device) recovery image is RA 1.5.2H
from menu of recovery I choose apply any zip file, without renaming the file
Then I have to reboot system
I reboot it, but it still remain with logo startup
I have tried to remove battery and then go into fastboot, but nothing
How can I solve this problem??
Thanks all for collaboration
Fabrizio
Related
Can anyone tell me what to do inside the bootloader on HTC DHD, I've done the rooting part with the $ and # and finally got the #, then I rebooted into bootloader, but what to do now? I have copied the stock 1.32 PD98IMG.zip ROM into the sd card
The options are:
fastboot
recovery
factory reset
simlock
image CRC
recovery is what you want
Okey, thanks. But inside the recovery mode system I choosed apply sdcard:update.zip. Is this the right thing to do?
I have done this step: Put PD98IMG.zip to your SD card. And of course all the cmd bull****
No that isnt quite right, you would need a file on your phone called 'update.zip' afew options down there is an option for apply zip from memory card, go in there and point it to the zip file you want, so in your case 'PD98IMG.zip' (then you done have to rename the zip file or anything) and flash away!
For example
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak
I use the recovery apps to resotre official ROM .... it always reboot halfway .... and enter into emergency mode....
Any help ???
Now I can only use other 3rd party recovery such as Recovery-v0.3.2.8-beta ...and restore Zip files format.....
Have you tried flashing the recovery.img and the corressponding rom image?
You can get these from the wiki
If all else fails, and you cannot recover using fastboot etc, then try QDLTool again from the wiki
(InsertNameHere) said:
Have you tried flashing the recovery.img and the corressponding rom image?
You can get these from the wiki
If all else fails, and you cannot recover using fastboot etc, then try QDLTool again from the wiki
Click to expand...
Click to collapse
Yes I did ......
Ok will try .............
trichard said:
Yes I did ......
Ok will try .............
Click to expand...
Click to collapse
Yes you did WHAT?
Normally installing stock ROM will cure most things unless you have internal issues.
Flash stock recovery.img for the stock ROM you want to get back to... I would suggest 360. You should already have downloaded the stock ROM update.pkg file that corresponds to the stock recovery.img you flashed in fastboot. Make sure you don't have any other files on the root of your SD that conflict with you update.pkg and MOST importantly, make sure it's named "update.pkg"
Boot into recovery and choose option 2 to update. IF it gets stuck (now this first boot after installing stock ROM may take 20 minutes or so), then pull the battery, boot into recovery, and choose to do a factory reset again
Hi guys
I'm hoping somebody could please help me with my somewhat-bricked device..bricked in the sense that I don't know what to do with it. (i'm a noob to this). I've tried installing a custom rom and completely screwed up my dell streak 5.
So the phone doesn't boot anymore and just takes me to the option to install update.pkg off the sd card. I added the file along with recovery.img to the sd card.
360 17397 00 May 31, 2011 PKG Recovery Hash Latest Retail rom
My problem is that I cannot for whatever reason get Flashboot to work in order to flash the recovery.img first. under device manager you see android phone/android adb interface but still can't manage the connection to use cmd prompt/fastboot.
Is there any other way of getting the recovery.img to work without fastboot/thru the sd card. I have no idea what i'm doing anymore. I've tried installing the update.pkg but after installation it just stays on the dell logo loading screen forever.
PLEASE help if you can.
Try QDLTool
cdzo72 said:
Yes you did WHAT?
Normally installing stock ROM will cure most things unless you have internal issues.
Flash stock recovery.img for the stock ROM you want to get back to... I would suggest 360. You should already have downloaded the stock ROM update.pkg file that corresponds to the stock recovery.img you flashed in fastboot. Make sure you don't have any other files on the root of your SD that conflict with you update.pkg and MOST importantly, make sure it's named "update.pkg"
Boot into recovery and choose option 2 to update. IF it gets stuck (now this first boot after installing stock ROM may take 20 minutes or so), then pull the battery, boot into recovery, and choose to do a factory reset again
Click to expand...
Click to collapse
Hi
Yes I did all these step .... take the recovery img and flash using fastboot ... and restore the full ROM image .... still half way .... reboot ... and into recover mode.... and then next rstore will have error ........
(InsertNameHere) said:
Have you tried flashing the recovery.img and the corressponding rom image?
You can get these from the wiki
If all else fails, and you cannot recover using fastboot etc, then try QDLTool again from the wiki
Click to expand...
Click to collapse
How to use Fast boot to restore complete image ROM ?
Command line is ?
trichard said:
How to use Fast boot to restore complete image ROM ?
Command line is ?
Click to expand...
Click to collapse
once in fastboot your command line is
fastboot flash recovery recovery.img (will take just about 3 or 4 seconds then type)
fastboot reboot (it will begin to reboot and you should press the volume up and down keys to get into recovery, you should already have the package on your sd card, choose option 2 to update... if it hangs, you don't have to flash recovery again, just boot into recovery and try a factory reset, if it hangs, well flash the ROM again
cdzo72 said:
once in fastboot your command line is
fastboot flash recovery recovery.img (will take just about 3 or 4 seconds then type)
fastboot reboot (it will begin to reboot and you should press the volume up and down keys to get into recovery, you should already have the package on your sd card, choose option 2 to update... if it hangs, you don't have to flash recovery again, just boot into recovery and try a factory reset, if it hangs, well flash the ROM again
Click to expand...
Click to collapse
No problem to get the recovery.img flash in FastBoot ...
It is getting the 150MB .pkg to install ....
Can FastBoot flash .pkg ?
Camera key donĀ“t work
cdzo72 said:
Yes you did WHAT?
Normally installing stock ROM will cure most things unless you have internal issues.
Flash stock recovery.img for the stock ROM you want to get back to... I would suggest 360. You should already have downloaded the stock ROM update.pkg file that corresponds to the stock recovery.img you flashed in fastboot. Make sure you don't have any other files on the root of your SD that conflict with you update.pkg and MOST importantly, make sure it's named "update.pkg"
Boot into recovery and choose option 2 to update. IF it gets stuck (now this first boot after installing stock ROM may take 20 minutes or so), then pull the battery, boot into recovery, and choose to do a factory reset again
Click to expand...
Click to collapse
hey buddy, when I enter the recovey mode, and will install a new rom or another option, the camera button does not work. What can I do?
Hello All!
So my gt540 has already been rooted and fastboot works. I have been running a 2.2 rom flashed through fastboot for a few months now, but I would like to get clockwork recovery working now for the added features of flashing zips and restoring and whatnot.
I have has a lot of trouble finding clear directions on how and what to do to get clockwork recovery on this device. Like I said, I already have root and fastboot is working as well. Can anyone please provide me with instructions on what I need to do from this point?
I have looked at this thread already, http://forum.xda-developers.com/showthread.php?t=817903, but I am still unsure of what exactly I am to do. Also, the mirrors are broken on this page.
Thank you for your help!
download the app root toolbox from the market
and then download a recovery .img and go to advance
flash recovery, find the file and press on it.
wait until finish and then all done!
Or here are better instructions!!
http://forum.xda-developers.com/showpost.php?p=16783348&postcount=1
Installing recovery:
You have multiple choices to choose from.
ClockworkMod Recovery 2.5.1.8 (Recommended)
ClockworkMod Recovery 4.x (Recommended but you may run into incompatible .zip files, download the recovery_clockwork_x.x.x.x_swift.zip file)
Amon RA 2.2.1 (Recommended)
Amon RA 1.7.0.1 (Not recommended due to incompatibility with zip files and recovery backups. Also .zips must be signed)
Download the recovery image of your choice (I strongly recommend Clockwork 2.5.1.8)
Next put your phone in Fastboot mode by rebooting then holding Camera+Power, make sure USB Cable is plugged in. Also let Windows search Windows Update for drivers.
Download fastboot.exe from here: http://adf.ly/2M8Hi and extract it to the desktop. Also put the recovery image you downloaded onto the desktop too.
Be sure to have your fastboot drivers installed, if you use Vista/Windows 7 then the driver should be auto-downloaded from Windows Update, if you use XP or the drivers won't install from Windows Update, then look at this.
Open a command prompt and type the following:
Code:
cd Desktop
fastboot devices (if you see ? fastboot then your device is recognized)
fastboot flash recovery name_of_recovery.img
fastboot reboot
When fastboot says rebooting, hold down HOME and wait. You should see clockwork pop up. Recovery is now on your phone. You can delete the fastboot, kdz and recovery file from your pc because we won't be needing them again. Unless you need to use fastboot.exe again, but just download the fastboot.zip again if you need it) The other files, we don't need.
(NOTE: If your phone reboots with no boot logos (LG logo and animation), or when you flash recovery and it doesn't come up, follow the steps found here. Thanks to fishears for the post!)
Now, installing custom ROMs. Pick any ROM you'd like from the ROM Development section, if you can, get the recovery version, it is much easier to install. Determine if it is a recovery backup, or update.zip
Recovery backups usually contain some .img files and a nandroid.md5 file. The folder containing these files will need to go in the sdcard\clockworkmod\backup folder. Flash them by going to Backup/Restore>Restore>Then pick the backup folder.
Recovery update.zips contain three (or four) files/folders:
boot.img (file)
install-busybox.sh (file, only appears in SOME ROMs)
system (folder)
META-INF (folder)
DO NOT EXTRACT THESE, just put the .zip file on your sdcard, then go into recovery and go to install .zip from sdcard>choose .zip>pick the .zip you downloaded. (NOTE FOR SWIFTDROID: You MUST put the update-cm-xxxxx.zip file found in the SwiftDroid_x.x.x.x_Recovery.zip on your sdcard for it to install!!!)
THANKS TO EFFORTLESS FOR INSTRUCTIONS!!
Thank you thank you very much sir!
kweng_ca said:
Thank you thank you very much sir!
Click to expand...
Click to collapse
Ur welcome!
Just thank me!
Sent from my GT540
I've G7-L11 Running Lollipop 5.1.1 - And its root is hell to me.
No recovery img in google works.. cuz latest twrp 2.8.7 and CWM are made for L01 and L00 NOT L11, thus my firmware kernal rejects the recovery and i got this message when trying to flash or directly boot the recovery img (Failed adb not found)
all fastboot boot twrp.img or fastboot flash recovery twrp.img or any command concerned or related to that issue doesnt work at all.
so please could any one find or build custom recovery for that model G7-L11 Lollipop?
Can any one who has G7-L11 or who is expert help me to get a working recovery?
am sorry brother you had to go through this, i went thru this, but i think i might have found a fix,. there is no custom recovery that works with huawei G7-L11 lollipop, what you need to do is first download the firmware for your phone, the lollipop firmware in order to extract the recovery file, that "UPADATE.APP" file, then download huawei firmaware extractor from
here "http://fs1.d-h.st/download/00173/wwfQ/HuaweiUpdateExtractor_0.9.9.3.zip"
then extract the files, (if you get stack on how to use it, there are videos on youtube to use it), (Extract Zip with any exctractor then, extract UPDATE.APP with huawei file extractor
Then u need a ADB files, i found using CMD directly very confusing, so download this "https://mega.nz/#!eVx3DKyC!9iI9QwvqTXJtqmfGEExC3S2XMfxWewNezQZWy_7gUz0" its a philwood touch file but it has the necessary files we need, what we are trying to do here is to restore the phone original recovery and flash the update from the exSD Card,.
After you have download the Philwood Touch file(this is a normal zip file) extract the files and inside you will find the recovery img file, just replace this with the one you extracted from UPDATE.APP. so that the philzwood folder will have the original recovery which comes with the update and the one that is usually found in the phone,
Then put your phone in the Fastboot and recovery by holding volume down and power button together, then from the Philzwood recovery first run"adb-windows" then "Fastboot windows" then "Install windows, after you have done this you will have your recovery(Orignal Recovery),
Turn off your phone, Then take the UPDATE.APP transfer the file to ExSD Card(External Memory Card) put it in a phone ( Copy the whole dload file), Now hold both Volume up and down and power button until your phone boot up dnt let go until you see a phone installing from SDCARD Just sit back relax after its done your phone will as good as new, i hope u get this right,.
If the download link for Philzwood doesnt work https://www.youtube.com/watch?v=AHe68zH4jgA there are link down at the description
Or search this in google "PHILZ-TOUCH-6.59-G7-buid-21-02-2015"
Deal All
I have G7 -L11 of Huawei ascend, it's front class broken but working. Can anyone help me to find out the same. In Delhi service center it is not available.
Hi guys. I have a problem with my ze500KL. I can install only the twrp 2.8.7.7 version. But when i try to install img or zip of roms /original firmware, the twrp fails the operation , saying " error data", "unable to mount"... i have problems with wipe too. any solution?
nik91thebest said:
Hi guys. I have a problem with my ze500KL. I can install only the twrp 2.8.7.7 version. But when i try to install img or zip of roms /original firmware, the twrp fails the operation , saying " error data", "unable to mount"... i have problems with wipe too. any solution?
Click to expand...
Click to collapse
I can't understand what you mean. If you want to install stock rom from TWRP recovery, you have to modify updater-skript.
Why do you can install only the twrp recovery 2.8.7.7, when we have the twrp recovery 3.0.0.2
File img you can flash from fastboot mode. Commands:
fastboot flash system file.img
fastboot flash recovery file.img
fastboot flash boot file.img
or
fastboot boot file.img for example twrp recovery img or stock recovery img. This is command for once booting.
I want to return to original firmware , i download it from the site of asus. So, i booted twrp in fastboot mode (i tried different version of twrp, but the only that starts is the 2.8.7.7 version) using adb.
Now i am in recovery with twrp 2.8.7.7. I can push using .zip files or img files on internal storage.
But i have different problems with this recovery:
IF i use wipe function: error opening sys, could not mount, enabe to mount, ... (failed)
If i install rom or firmware with zip files: error unable to mount, unable to find partition for path.... (failed)
Adb sideload goes failed too.
What should i do???
I think that the problem is in the internal partition... I have to install using a min usb ext storage? or what????? thanks :fingers-crossed:
nik91thebest said:
I want to return to original firmware , i download it from the site of asus. So, i booted twrp in fastboot mode (i tried different version of twrp, but the only that starts is the 2.8.7.7 version) using adb.
Now i am in recovery with twrp 2.8.7.7. I can push using .zip files or img files on internal storage.
But i have different problems with this recovery:
IF i use wipe function: error opening sys, could not mount, enabe to mount, ... (failed)
If i install rom or firmware with zip files: error unable to mount, unable to find partition for path.... (failed)
Adb sideload goes failed too.
What should i do???
I think that the problem is in the internal partition... I have to install using a min usb ext storage? or what????? thanks :fingers-crossed:
Click to expand...
Click to collapse
Easiest way to fix your phone is flash stock rom from stock recovery. Stock rom put to sd card. Reboot to stock recovery and choose flash rom from sd card. New version number system must be the same or higher than installed in the phone.
Do you want to return to the lower version of Android.
http://forum.xda-developers.com/zenfone-2-laser/general/guide-downgrade-zenfone-2-laser-to-t3382172
Do you want to flash stock rom from twrp recovery.
http://forum.xda-developers.com/zen...uide-how-to-flash-stock-rom-via-twrp-t3409768
Muminek111 said:
Easiest way to fix your phone is flash stock rom from stock recovery. Stock rom put to sd card. Reboot to stock recovery and choose flash rom from sd card. New version number system must be the same or higher than installed in the phone.
Do you want to return to the lower version of Android.
http://forum.xda-developers.com/zenfone-2-laser/general/guide-downgrade-zenfone-2-laser-to-t3382172
Do you want to flash stock rom from twrp recovery.
http://forum.xda-developers.com/zen...uide-how-to-flash-stock-rom-via-twrp-t3409768
Click to expand...
Click to collapse
Stock recovery doesn't work man. The only recovery that works is the twrp 2.8.7.7. But it has problems.
nik91thebest said:
Stock recovery doesn't work man. The only recovery that works is the twrp 2.8.7.7. But it has problems.
Click to expand...
Click to collapse
Do you have Lollipop or Marshmallow and what is your version number.
For Marshmallow you need to this working twrp recovery.
https://drive.google.com/file/d/0B7F3ZXr565GkY28yUjhfRkd5MUk/view?usp=drivesdk
For Lollipop you need to this working twrp recovery.
https://drive.google.com/file/d/0B7F3ZXr565GkY1NQbUtoVzdwWEU/view?usp=drivesdk
If you haven't installed stock recovery, it's not no problem. You can it flash from fastboot mode.
i had mawshmallow. i tried but failed...
nik91thebest said:
i had mawshmallow. i tried but failed...
Click to expand...
Click to collapse
How did you flash the file twrp.img.
OK guys I've solved the problem. I moved in this way:
1) Volume up + power to go in fastboot mode
2) after installing adb and the other drivers, i've insered these commands:
fastboot erase cache
fastboot erase userdata
fastboot erase system
3) after downloading twrp version 3.0.0 (for the zenfone 2 laser), I load it using the command "fastboot boot (name file twrp).zip"
4) the recovery starts automatically. Now i downloaded the file "back2stock.zip" and the original firmware (WW, worldwide) form the official site of the Asus
5) this passage is the most important:using 7zip I've extracted the file zip of the firmware and the backtostock, then i created a new file using 7zip : in this new zip i've loaded the files inside back2stock and the files file_contentexts, system.new.dat, system.patch.dat, boot.img e system.trasfer.list inside the zip of the official firmware
6) I've loaded this new file on the phone using the command "adb push (new file name).zip /"
7) at last i have installed this file on the phone ENJOY it