[Q] Semi-Bricked installing Clockworkmod (Not 100% noobish, I swear!) - Epic 4G General

Okay, so I'm coming from a Vibrant and trying to get Mobile AP going on a friend's Epic. Should be no problem, right?
First: His phone was completely 100% Stock (DI18)
Guess not. So I manually rooted using the following:
Code:
adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
adb shell chmod 755 /data/local/tmp/rageagainstthecage-arm5.bin
adb push root.sh /data/local/root.sh
adb shell chmod 755 /data/local/root.sh
adb shell /data/local/root.sh
adb shell mount -t rfs -o remount,rw /dev/block/stl9 /system
adb shell rm /system/etc/install-recovery.sh
adb push joeykrim-root.sh /system/bin/joeykrim-root.sh
adb push jk-su /system/bin/jk-su
adb push Superuser.apk /system/app/Superuser.apk
adb push playlogo-orig /system/bin/playlogo-orig
adb push playlogo /system/bin/playlogo
adb push busybox /system/bin/busybox
adb push resolv.conf /system/bin/resolv.conf
adb push remount /system/bin/remount
adb shell chmod 755 /system/bin/joeykrim-root.sh
adb shell chmod 755 /system/bin/playlogo
adb shell chmod 755 /system/bin/busybox
adb shell chmod 755 /system/bin/remount
adb shell chmod 755 /system/bin/playlogo-orig
adb shell /system/bin/busybox --install -s /system/xbin
adb reboot
Which is the same as the one click root except I killed the DI18 recovery.sh thing.
Now everything looks pretty good, but I didn't test root (guessing this is my big ****up) and so I went on to install ROM Manager and then flash ClockworkRecovery for the Epic from ROM Manager and it seems to succeed. Asks for Superuser, I hit okay when the Superuser box pops up, and yay, I'm in the home stretch, right?
NOPE.
So I reboot to recovery and it goes like it's loading Clockwork, but then it says that it failed signature check. Uh oh. Well, whatever, reboot and try again later. Or not - now it won't do anything except reboot into recovery and it says "manual mode" at the bottom. It lets me scroll up and down, but not select anything - yes, I tried every single button on the phone.
On to Odin, then! So I download the tar (DG27) and pit (512 first, then 513, later), but it hangs at param.lfs every time, and now it gives the good old phone--!--pc bit. Can get back to download though.
Suggestions, please, anyone?

dorsai3d said:
Okay, so I'm coming from a Vibrant and trying to get Mobile AP going on a friend's Epic. Should be no problem, right?
First: His phone was completely 100% Stock (DI18)
Guess not. So I manually rooted using the following:
Code:
adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
adb shell chmod 755 /data/local/tmp/rageagainstthecage-arm5.bin
adb push root.sh /data/local/root.sh
adb shell chmod 755 /data/local/root.sh
adb shell /data/local/root.sh
adb shell mount -t rfs -o remount,rw /dev/block/stl9 /system
adb shell rm /system/etc/install-recovery.sh
adb push joeykrim-root.sh /system/bin/joeykrim-root.sh
adb push jk-su /system/bin/jk-su
adb push Superuser.apk /system/app/Superuser.apk
adb push playlogo-orig /system/bin/playlogo-orig
adb push playlogo /system/bin/playlogo
adb push busybox /system/bin/busybox
adb push resolv.conf /system/bin/resolv.conf
adb push remount /system/bin/remount
adb shell chmod 755 /system/bin/joeykrim-root.sh
adb shell chmod 755 /system/bin/playlogo
adb shell chmod 755 /system/bin/busybox
adb shell chmod 755 /system/bin/remount
adb shell chmod 755 /system/bin/playlogo-orig
adb shell /system/bin/busybox --install -s /system/xbin
adb reboot
Which is the same as the one click root except I killed the DI18 recovery.sh thing.
Now everything looks pretty good, but I didn't test root (guessing this is my big ****up) and so I went on to install ROM Manager and then flash ClockworkRecovery for the Epic from ROM Manager and it seems to succeed. Asks for Superuser, I hit okay when the Superuser box pops up, and yay, I'm in the home stretch, right?
NOPE.
So I reboot to recovery and it goes like it's loading Clockwork, but then it says that it failed signature check. Uh oh. Well, whatever, reboot and try again later. Or not - now it won't do anything except reboot into recovery and it says "manual mode" at the bottom. It lets me scroll up and down, but not select anything - yes, I tried every single button on the phone.
On to Odin, then! So I download the tar (DG27) and pit (512 first, then 513, later), but it hangs at param.lfs every time, and now it gives the good old phone--!--pc bit. Can get back to download though.
Suggestions, please, anyone?
Click to expand...
Click to collapse
Did you try flashing the PIT by itself? If not, try it. Sometimes that will get you back up and running.

Also, the DI18 tar is available now.
http://rapidshare.com/files/423321746/SPH-D700-DI18-8Gb-REL.tar.md5

Yep, tried pit by itself, and I just downloaded DI18 .pit, still nothing. He gave up and is on his way to get a replacement.
But I saw (somewhere...so many threads in such a short time period....) that I think someone executed something to do with rageagainstthecage while doing the manual root - that wasn't in the one click root I downloaded from the sticky in the development section. Could that have anything to do with it? I wouldn't think so, but I'm really quite curious how this could fail so hardcore - this is the first andriod device I've not been able to recover from (modded to hell and back a G1, Magic, Droid, and a Vibrant...)
EDIT: wait, pit...no, didn't do the pit by itself - I'm a dumbass, I tried tar by itself. Guess that's what I get for being in a rush

first off, you dont need the PIT at all.
secondly, the reason it was hanging was because you didnt hook the phone up right.
for the best results, you need to do it like this, IN THIS ORDER:
have odin open on your desktop screen
plug in phone
before the phone starts charging, BOOT INTO DOWNLOAD MODE
Odin will instantly pick up the phones connection, and you can start from there. I'm not sure why THIS setup works when doing it in another order is technically the same thing... but hey, you can thank Samsung for that.
happy flashing!

infamousjax said:
first off, you dont need the PIT at all.
secondly, the reason it was hanging was because you didnt hook the phone up right.
for the best results, you need to do it like this, IN THIS ORDER:
have odin open on your desktop screen
plug in phone
before the phone starts charging, BOOT INTO DOWNLOAD MODE
Odin will instantly pick up the phones connection, and you can start from there. I'm not sure why THIS setup works when doing it in another order is technically the same thing... but hey, you can thank Samsung for that.
happy flashing!
Click to expand...
Click to collapse
The PIT file is nice to have around in case you bork your phone from a bad flash or if you're flashing a kernel or radio independently from a ROM. But if you're just flashing a stock system tar, then you are correct in saying it's not needed.

Hmm...I always opened Odin, had the phone in download, then plugged it in. It recognized it fine, and that's how I flashed my Vibrant. Oh well, that's not the real oddity here. I'm more concerned about why it was stuck in stock recovery mode and you couldn't select anything (but could scroll?!). Why would this happen, and why did clockwork recovery fail the signature check on first install? I still want to get this working, but I don't think he's going to put his (now functional replacement) up for tinkering after that scare, but I'll be getting one relatively shortly.

I got stuck in the same place - used the one-click root method and had Superuser and Titanium and Rom Manger said they had root. So I flashed the clockwork recovery mod and that seemed to work fine, but when I went to backup my current ROM, I got stuck exactly in the same place with the stock recovery "manual mode" where I could scroll but not select anything.
I did however run Odin and flashed it back and worked perfect the first time I tried, so not sure why it isn't working in your case.
Coming from the EVO I didn't know there was an issue but I read that you can't use Clockwork Mod on the stock kernel? I don't know but since this is my wife's phone and I've bricked it once I'll just play with my EVO for now

Okay, so it's reproducible. That's a start. I'm assuming you downloaded Clockworkmod through ROM Manager as well?
When you reflashed, what OS/bit operating system was it? I did it from Windows 7/64-bit. Wondering if maybe the drivers have something to do with it... (oh samsung, you write such awful software but your hardware is oh-so-tasty....)

yes - I downloaded clockwork mod from Rom Manager and it had a choice for the Epic so I thought all was good.
I usually use my Macbook Pro which works fine with my Evo but wouldn't work with the Epic when I rooted so I used my Windows 7/64 bit machine for both the root and then the Odin recovery. I installed the 64bit drivers found somewhere here initially so those are what were installed when I ran Odin. I did use the DI07 tar for some reason (it was this past weekend and I'm not sure DI18 was posted here yet or I just grabbed the wrong one), so maybe try that one if you haven't yet.

Okay, so long story short, don't use ROM Manager for the Epic. Should've done it manually like I usually do instead of taking the lazy way out. Oh well, live and learn, no permanent damage done and I hope this will prove helpful to others.

dorsai3d said:
Okay, so long story short, don't use ROM Manager for the Epic. Should've done it manually like I usually do instead of taking the lazy way out. Oh well, live and learn, no permanent damage done and I hope this will prove helpful to others.
Click to expand...
Click to collapse
ROM Manager works fine if you have a compatible kernel installed first. Most of the newer custom kernels have the compatibility built in.

Right, but the compatibility isn't there in the stock kernel, hence the issue. I don't remember if there's any kind of PSA about this in the dev/root/clockwork threads, perhaps there should be. If there is, forgive me, for it's late and my attention is divided...

irwinm said:
I got stuck in the same place - used the one-click root method and had Superuser and Titanium and Rom Manger said they had root. So I flashed the clockwork recovery mod and that seemed to work fine, but when I went to backup my current ROM, I got stuck exactly in the same place with the stock recovery "manual mode" where I could scroll but not select anything.
I did however run Odin and flashed it back and worked perfect the first time I tried, so not sure why it isn't working in your case.
Coming from the EVO I didn't know there was an issue but I read that you can't use Clockwork Mod on the stock kernel? I don't know but since this is my wife's phone and I've bricked it once I'll just play with my EVO for now
Click to expand...
Click to collapse
dorsai3d said:
Okay, so it's reproducible. That's a start. I'm assuming you downloaded Clockworkmod through ROM Manager as well?
When you reflashed, what OS/bit operating system was it? I did it from Windows 7/64-bit. Wondering if maybe the drivers have something to do with it... (oh samsung, you write such awful software but your hardware is oh-so-tasty....)
Click to expand...
Click to collapse
mattallica76 said:
The PIT file is nice to have around in case you bork your phone from a bad flash or if you're flashing a kernel or radio independently from a ROM. But if you're just flashing a stock system tar, then you are correct in saying it's not needed.
Click to expand...
Click to collapse
I went through the same thing. Stuck in Clockwork recovery. Here is the way I got out. First I flashed the mixup kernel from clockwork. Then I backed up my ROM. THEN I simply restored the ROM and presto...back in the OS. Once I had everything up and smooth THEN...I finally added the MobileAP update zip via the file fixed by Firon.

Not stuck at clockwork, though. Stuck in the stock recovery. Something it just seems you have to odin out of because you can't flash anything.

infamousjax said:
first off, you dont need the PIT at all.
secondly, the reason it was hanging was because you didnt hook the phone up right.
for the best results, you need to do it like this, IN THIS ORDER:
have odin open on your desktop screen
plug in phone
before the phone starts charging, BOOT INTO DOWNLOAD MODE
Odin will instantly pick up the phones connection, and you can start from there. I'm not sure why THIS setup works when doing it in another order is technically the same thing... but hey, you can thank Samsung for that.
happy flashing!
Click to expand...
Click to collapse
DuDe, what a save! The steps you described are what got me out of a hole I had been in since 2pm. I can't believe that's what fixed it. Thanks!

Related

problem loading any rom

Well I need help. Last week when verizon was having probelms with service my friend thought that it was his phone. He got to messing with **** and now he cant load any roms. Im hoping someone can help. When he boots into recovery mood he no longer has the option to flash zip from sd. Also Nand backup is now missing so he can not backup to a restore point. the only options he has is flash update reboot wipe cache and factory reset. I have heard of people losing root but with that would you even be able to boot by pressing power and the volume up key... he wont leave me alone about fixing his problem so any info someone could shed on the situation I would really appreciate... Thanks
leech2082 said:
Well I need help. Last week when verizon was having probelms with service my friend thought that it was his phone. He got to messing with **** and now he cant load any roms. Im hoping someone can help. When he boots into recovery mood he no longer has the option to flash zip from sd. Also Nand backup is now missing so he can not backup to a restore point. the only options he has is flash update reboot wipe cache and factory reset. I have heard of people losing root but with that would you even be able to boot by pressing power and the volume up key... he wont leave me alone about fixing his problem so any info someone could shed on the situation I would really appreciate... Thanks
Click to expand...
Click to collapse
Just redo Amons recovery. That should fix it.
Follow these steps: (Also found in Sticky section)
III: Flashing a Custom Recovery
Flashing a custom recovery will make your life easier when flashing ROMs in the future.
1. Download this file: Recovery.zip
2. Extract file contents to your \tools\ directory of your Android SDK.
3. Open up a command prompt and go to your tools directory, and execute these commands:
* adb shell mount -o rw,remount /dev/block/mtdblock3 /system
* adb push recovery.img /sdcard
* adb push flash_image /system/bin
* adb shell chmod 755 /system/bin/flash_image
* adb shell flash_image recovery /sdcard/recovery.img
4. Success! You now have a recovery partition installed on your phone. You can access it by running "adb shell reboot recovery" or by powering off your phone, holding "Volume Up + Power On"
Once you do this...power down... then volume up + end = recovery..
The behavior of the recovery boot that you are describing is an HTC recovery; it is not Amon_RA. Amon_RA didn't change, it got replaced.
That strongly suggests that "your friend" re-flashed an HTC ROM onto the phone, probably using a HBOOT method (using a "PB00IMG.ZIP" file).
droidkevlar said:
Just redo Amons recovery. That should fix it.
Click to expand...
Click to collapse
droidkevlar assumes here that what got flashed was the HTC Root PB00IMG.ZIP file.
For the sake of "your friend who won't leave you alone", I hope droidkevlar is correct; otherwise your friend has joined the leak club.
Good luck,
bftb0
vash8806 said:
* adb shell mount -o rw,remount /dev/block/mtdblock3 /system
* adb push recovery.img /sdcard
* adb push flash_image /system/bin
* adb shell chmod 755 /system/bin/flash_image
* adb shell flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
or you could do it from the PC with a single command. Put the phone into FASTBOOT mode (power on phone holding down both Send+End/Power), and then
Code:
fastboot flash recovery recovery-RA-eris-v1.6.2.img
The md5sum of Amon_RA v1.6.2 for the Eris is e3932991f097993602af3c7a4b61a4f8
You can check to see if fastboot is communicating with the phone by using the command "fastboot devices". (Note that if running fastboot from Linux, fastboot needs to be run as root to access the USB device).
bftb0

[Guide] How to recover your semi-brick

YES YOU NEED TO READ THIS WHOLE POST, PROB MORE THEN ONCE TO MAKE SURE YOU GOT IT. YES I KNOW HOW LONG IT IS, I TYPED IT!
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
first go here and read this for info: http://forum.xda-developers.com/showthread.php?t=838484
now since your here im going to assume that its too late.
*things you will need.
copy of cwm recovery. get it here (the manual install link): http://forum.xda-developers.com/showpost.php?p=9145724&postcount=28
adb installed and working.
a known good rom, or nandroid backup. here is one: http://forum.xda-developers.com/showthread.php?t=836042 (use odex one)
a wpthis.ko for YOUR specfic kernel (run (adb shell cat /proc/version) that will tell you what kernel you have)
*first thing we need to know is, are you s-off or s-on now?
if your s-off just boot into clockwork mod recovery, wipe the phone and flash a known good rom and be done with it. if you dont have cwm recovery installed. boot into fastboot (vol down+power) you must have the sdk/adb installed and working, and type fastboot flash recovery LocationOfRecovery.img (where LocationOfRecovery.img= where you have the recovery, ie c:\android\recovery.img). once thats installed follow instructions above.
*if you are s-on:
will the phone boot into android? if so your not bad off.
if you want to unroot to return the phone, follow the unroot thread here: http://forum.xda-developers.com/showthread.php?t=835971
if you dont want to unroot then you have a couple of different options. if you have cwm recovery still installed, just follow instructions above and flash a known good rom. ive been told that boot.img (kernel) wont flash if you are s-on. the way to fix this (temporarily) is boot into recovery, but before you flash run these commands:
(put wpthis.ko in sdk folder)
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
then proceed to flash the rom. once booted into android skip down to, "now to get back to s-off"
*if you have stock or eng-recovery installed.
will the phone attempt to boot android at all? where is it stuck at?
a good min after it starts to try to boot, type these commands:
adb remount
adb shell
if you can get in shell then theres still hope. back out shell for a second and start here:
put the cwm recovery.img and wpthis.ko in your sdk folder
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb push recovery.img /data/local/recovery.img
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
# dd if=/data/local/recovery.img of=/dev/block/mmcblk0p21 (now wait a min or 2 to give it time to finish)
#sync (give it another min or to just to be safe)
#reboot recovery
at this point you should be in cwm recovery. follow instructions above for flashing with s-on.
*if you cannot get into shell while booting, but have eng-recovery installed, there might be some options.(however this is all theory)
boot into recovery-
if you are on linux using adb, you can try taking sh from /system/bin folder of any custom rom, chmod 0755 it, then push it to /system/bin and adb shell might work.
windows-
boot into recovery.
a system.img compatible with your installed kernel pushed may work. put the system.img into the sdk folder.
adb push system.img /data/block/mmcblk0p25
then reboot and see where you are. if that dont work, grab the modified miscnew.img here: http://www.4shared.com/file/pUPfrGi-/mmcblk0p17.html
rename it misc.img put it in sdk folder and
adb push misc.img /dev/block/mmcblk0p17
then reboot into bootloader with PC10IMG.zip on root of sdcard and it should run though. if it does your fully stock and get to start all over again.
*if you cannot get into shell, and you have stock recovery, im sorry your pretty screwed. as of right now the only thing thats gonna bring it back is a full img/update signed from htc thats equal to or higher then the version currently on the phone. (well and jtag of course)
*well now you've done one of the steps above. your booted into android, you have perm root, and cwm recovery installed, just still s-on. dont worry your almost there!
first take that wpthis.ko for you kernel and push it, and the eng hboot.
adb push wpthis.ko /data/local/
adb push hboot-eng.img /data/local
then from adb shell, or terminal root prompt:
# insmod /data/local/wpthis.ko (again you should get the function not implemented error)
NOW REMEMBER THIS NEXT STEP COULD MEAN DEATH FOR YOU G2 IF TYPED WRONG, AND AFTER ALL THIS HARD WORK!
# dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
wait a few mins to be sure its done.
# sync
wait a few more just cause.
reboot, you should now be s-off, cwm recovery installed, and free to do whatever you want. just dont go screwing it up again
* as new methods are discovered, or ones here are proven wrong, i will update as necessary. as of the writing post, 2 devices that i know of have been saved!
good luck!
wpthis.ko for bacon bits.03 kernel: http://www.4shared.com/file/OAcd1bix/wpthis-263221-cyanogenmod.html

HTC Desire HD won't boot after flash

Hello!
I have a big problem.
I might have bricked the device however the things what i can do are the following:
- Boot into recovery (clockworkmod)
- start a usb data connection with a computer (clockworkmod)
- input of the ADB commands through terminal running in the computer
What i did?
Flashed the memory with a Cyanogenmod 6.3 according to official guideline:
http://wiki.cyanogenmod.com/index.php?title=HTC_Desire_HD:_Full_Update_Guide
and took note and used most procedures from there actually:
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2
Didn't do the engineering hboot.
Everything was working. I got cyanogenmod working.
Then after a while i tried to restore a backup which i had from original HTC configuration which was actually just before i did the cyanogenmod flash with clockworkmod.
So the backup was from the time i already unlocked the phone from locks and had root access.
So again the restore function worked and everything was back to normal.
How i managed to half brick the device?
Yesterday i wanted to put cyanogenmod back to my phone and then the s hit happened.
I admit that i didn't check whether the locks were off i just thought that these should have been off because backup soft was from time i had phone unlocked.
Anyway to cut the long story short - after flashing the memory with cyanogenmod with the help of rom manager the phone didn't boot anymore.
I tried all the options from clockworkmod flash and format and upgrade straight from sd card a new cyanogenmod but nothing worked. Again the white HTC screen and connection through a usb cable.
So probably i have the s-off and who knows what else.
I dont have a root access anymore as well because i already tried it through the terminal. It doesn't recognize the su command.
Question is, how can i put the cyanogenmod back on by only using clockworkmod recovery and working ADB connection through usb link?
Probably have to just get the locks off but the original instructions say i have to have terminal emulator running in phone but i only have clockworkmod recovery soft running at best.
S hit, again very long story, but hope someone can help me!
Cheers!
I had a similar problem yesterday, after flashing ClockwordkMod Recovery to version 3.0.0.5 (it said it had an update) and trying to reinstall CyanoGenmod 6.3 my phone would no longer boot, it got stuck in the white HTC Logo screen.
I'm not really an expert on this stuff, but I managed to "recover" my device by downgrading it again to 1.32.405.6 using this thread: http://forum.xda-developers.com/showthread.php?t=905003. First I had tried to recover a previously backed-up ROM, but that did not work.
I had to put the stock 1.32 PD98IMG.zip file on my SD card using ClockwordMod Recovery (since I could no longer boot), I'm not exactly sure which steps I took to do so, I have tried a lot of things yesterday before I got everything working again.
After this my phone could boot again and I was ready to play around again. I reinstalled CyanogenMod again using an older version of ClockwordMod Recovery. I'm not sure if this is related in any way, but my phone works smooth again..
Once again; I'm really not on expert on how all this stuffs works, I just hope that I can help you on the way with some ideas on how to fix your device.
So probably i have the s-off and who knows what else.
Click to expand...
Click to collapse
I figured out wether my device was S-OFF and/or Eng S-OFF by entering "adb reboot bootloader" from cmd. At the top of the page for me it states:
ACE PVT ENG S-OFF
I believe it stated only SHIP S-OFF when I had the problems you describe.
Thanks man for quick reply!
I definitely try the downgrading solution and i remember i too did the update for clockworkmod rom manager before the flash.
I'll report back tomorrow.
Cheers!
couldn't boot up any roms earlier after upgrading clockworkmod recovery to v3... downgraded to 2.5.1.3 and worked fine
Hi Guys, I have exactly the same problem. It would be really great if you provide me the step by step process to downgrade clockworkmod recovery.
Cheers,
Pav
I'd like to say to you guys that the downgrading solution worked
Didn't have to use any programs inside phone except clocworkmod recovery which was the only thing i had running.
Thank you user jvdminne!
The downgrading solution was in official cyanogenmod guidelines as well but forgot it anyway.
------------
Pavanka!
The downgrading solution from the link is pretty step by step actually.
But anyway, with my half-broken phone the lines didnt do the trick:
Code:
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/psneuter
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/psneuter
I had to copy psneuter and misc_version to /tmp folder not into /data/local/tmp.
But anyhow, i already had # root access through computer. Probably from last half flashed system.
So only thing i basically had to do was to cd in windows cmd into folder where i had psneuter and misc_version and after that:
Code:
adb push misc_version /tmp
adb shell chmod 777 /tmp/misc_version
adb shell
in the shell (adb shell):
Code:
cd /tmp
./misc_version -s 1.31.405.6
And after that follow the instructions from previous link.
To get the ADB functions working just follow the guide here or from previous link where it had adb program included, but not sure whether it was working cause i had it from Android SDK package already set.
Hope you got some sense out of it.
Cheers!
Hey
I had similar problems to those mentioned in the beginning with the cyanogen mod...
I installed cyanogen and the it got to the screen with the blue swirlyness and then just kept restarting. I decided to restore a backup and just got stuck on the white htc screen.
I decided to follow this post and now am stuck with this...
I just tried a couple of different things to no avail...
maxa1577 said:
Hey
I had similar problems to those mentioned in the beginning with the cyanogen mod...
I installed cyanogen and the it got to the screen with the blue swirlyness and then just kept restarting. I decided to restore a backup and just got stuck on the white htc screen.
I decided to follow this post and now am stuck with this...
I just tried a couple of different things to no avail...
Click to expand...
Click to collapse
If you had ROOT , S-OFF etc you shouldn't need to go through all this rigmarole, if you can access recovery carry out a full wipe /system /cache /dalvik-cache and reflash your chosen ROM, should be all that's required
ghostofcain said:
If you had ROOT , S-OFF etc you shouldn't need to go through all this rigmarole, if you can access recovery carry out a full wipe /system /cache /dalvik-cache and reflash your chosen ROM, should be all that's required
Click to expand...
Click to collapse
phew cheers for that. First time flashing and I thought I killed me poor desire.

[Q] update not possible

hi there,
i believe i bricked my hero.
After android >2.1 booted only in safe mode i was playing around with other roms and Recoveries.
Only RUU_2.73.405.5 (Android 1.5) worked but after i updated OTA to 2.1 there is no way to flash back to 1.5 with RUU: it says Bootloader version error.
so in safe mode i coudn't install any app for Root or get SU for flashing a custom recovery over adb.
have anyone any idea what i could do, please?
u have to make a Goldcard....
Do You still have amon ra or clockwork?
Edit: nvm, i see that You cant flash them.
Sent from my Hero using XDA
thanks for your reply,
my sdcard is a goldcard, but now i've tried another one.
no success.
is there any way to get root with adb?
(i can't mount /system for...
adb shell mount /system
adb push su /system/bin/
adb shell chmod 4755 /system/bin/su
adb push Superuser.apk /system/app/
adb shell reboot)
overall the main problem with every rom is the safe mode

LG G2 (Verizon) - Recovery (CWM), no download, bootloop stuck **FIXED**

I will preface this with stating that this is not my phone. A friend had rooted his LG G2 and installed CWM. After he accepted the OTA, the phone was essentially rendered useless. After this process, the phone will be reverted back to 100% STOCK. It took a while to compile all of this information, and I give all credit to respective owners, but this process I pieced together from multiple threads and was able to make this work.
Symptoms-
Not booting (Hanging at LG screen)
Able to access CWM recovery
Unable to Mount USB
Unable to access Download Mode
#####1#####
Uninstall all previous LG Drivers installed (Add/Remove Programs)
#####2#####
Install PDAnet to get the drivers required installed.
#####3#####
Once PDAnet is installed, ADB should recognize the device when it is in 'Recovery' mode.
(ADB Devices should give the result of: ###DEVICEID### Recovery)
#####4#####
Download aboot.img from: http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware/10b_EUR_16G_partitions
(The file will need to be renamed to aboot.img)
#####5#####
Download: http://www.androidfilehost.com/?fid=23252070760973106
#####6#####
Extract the files we need:
g2_security
loki_patch
loki_flash
recovery.img
#####7#####
Get into a command prompt and run the following:
adb push g2_security /sdcard/
adb root
adb push loki_patch /data/local/tmp
adb push loki_flash /data/local/tmp
adb push recovery.img /data/local/tmp
adb shell "dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/data/local/tmp/aboot.img"
adb shell "chmod 644 /data/local/tmp/aboot.img"
adb shell "chmod 755 /data/local/tmp/loki_patch"
adb shell "chmod 755 /data/local/tmp/loki_flash"
adb shell "/data/local/tmp/loki_patch recovery /data/local/tmp/aboot.img /data/local/tmp/recovery.img /data/local/tmp/recovery.lok"
adb shell "/data/local/tmp/loki_flash recovery /data/local/tmp/recovery.lok"
adb shell "rm /sdcard/g2_security"
adb shell "dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img"
adb shell "dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota"
adb shell sync
adb reboot recovery
Once the above is done, the phone should boot into TWRP. I shut the phone off at this point and held "Volume Up" + "Power" and Download mode now worked!
#####8#####
Uninstalled PDAnet and then followed the instructions on the following page (including installing the drivers)
#####9#####--At this point the following thread finished reverting the phone to stock.
http://forum.xda-developers.com/showthread.php?t=2448960
My only suggestion is that you RUN THE MD5 HASH to ensure the large file downloads correctly. After this was done, the phone was successfully reverted back to stock.
If you found this help, please donate and buy me a beer!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=ZBZ8G6ZPUEN4C
Hi, your last step, a Verizon link for restoring back to stock.. I have international D802.. can I use some other rom(omni rom) instead of your last step...
Guys, this exactly worked for me.. i used D802... however, i used all verizon files only to flash and finally went to download mode and flashed stock ROM... awesome help guys.. i was about to change the PCB by spending half of mobile cost..... i am definitely getting you a case next week...
still nothing
Still stuck in fast boot mode cannot do anything in cwm
---------- Post added at 09:39 PM ---------- Previous post was at 09:35 PM ----------
Still stuck in fast boot mode cannot do anything in cwm. Please can someone help me ??????
:good:
Me too on D802 and it worked. followed exactly as instructed.
thanks bro!
Thanks so much for the guide, one problem for me.... Im on a mac... I have pdanet, and android sdk set up but i cant get the commands to work. any idea on what to use for the commands?
P.S It does find the phone just fine with ./adb devices
dtuma1980 said:
I will preface this with stating that this is not my phone. A friend had rooted his LG G2 and installed CWM. After he accepted the OTA, the phone was essentially rendered useless. After this process, the phone will be reverted back to 100% STOCK. It took a while to compile all of this information, and I give all credit to respective owners, but this process I pieced together from multiple threads and was able to make this work.
Symptoms-
Not booting (Hanging at LG screen)
Able to access CWM recovery
Unable to Mount USB
Unable to access Download Mode
#####1#####
Uninstall all previous LG Drivers installed (Add/Remove Programs)
#####2#####
Install PDAnet to get the drivers required installed.
#####3#####
Once PDAnet is installed, ADB should recognize the device when it is in 'Recovery' mode.
(ADB Devices should give the result of: ###DEVICEID### Recovery)
#####4#####
Download aboot.img from: http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware/10b_EUR_16G_partitions
(The file will need to be renamed to aboot.img)
#####5#####
Download: http://www.androidfilehost.com/?fid=23252070760973106
#####6#####
Extract the files we need:
g2_security
loki_patch
loki_flash
recovery.img
#####7#####
Get into a command prompt and run the following:
adb push g2_security /sdcard/
adb root
adb push loki_patch /data/local/tmp
adb push loki_flash /data/local/tmp
adb push recovery.img /data/local/tmp
adb shell "dd if=/dev/block/platform/msm_sdcc.1/by-name/aboot of=/data/local/tmp/aboot.img"
adb shell "chmod 644 /data/local/tmp/aboot.img"
adb shell "chmod 755 /data/local/tmp/loki_patch"
adb shell "chmod 755 /data/local/tmp/loki_flash"
adb shell "/data/local/tmp/loki_patch recovery /data/local/tmp/aboot.img /data/local/tmp/recovery.img /data/local/tmp/recovery.lok"
adb shell "/data/local/tmp/loki_flash recovery /data/local/tmp/recovery.lok"
adb shell "rm /sdcard/g2_security"
adb shell "dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img"
adb shell "dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota"
adb shell sync
adb reboot recovery
Once the above is done, the phone should boot into TWRP. I shut the phone off at this point and held "Volume Up" + "Power" and Download mode now worked!
#####8#####
Uninstalled PDAnet and then followed the instructions on the following page (including installing the drivers)
#####9#####--At this point the following thread finished reverting the phone to stock.
http://forum.xda-developers.com/showthread.php?t=2448960
My only suggestion is that you RUN THE MD5 HASH to ensure the large file downloads correctly. After this was done, the phone was successfully reverted back to stock.
If you found this help, please donate and buy me a beer!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=ZBZ8G6ZPUEN4C
Click to expand...
Click to collapse
My ADB keeps saying that my phone is unauthorized ;( I can only access .zip. Anyone else have this issue? Have tried multiple drivers, Sideload is the only thing that works.
Joppykid said:
My ADB keeps saying that my phone is unauthorized ;( I can only access .zip. Anyone else have this issue? Have tried multiple drivers, Sideload is the only thing that works.
Click to expand...
Click to collapse
Are you connected via PDAnet?
dtuma1980 said:
Are you connected via PDAnet?
Click to expand...
Click to collapse
I can't because I cannot turn on USB Debugging, I am stuck in the Recovery. Details of my situation are in this thread I posted. http://forum.xda-developers.com/showthread.php?t=2726985
Joppykid said:
I can't because I cannot turn on USB Debugging, I am stuck in the Recovery. Details of my situation are in this thread I posted. http://forum.xda-developers.com/showthread.php?t=2726985
Click to expand...
Click to collapse
Oh boy i got the same issue before. I just go to a local technician to have it fixed.
Joppykid said:
I can't because I cannot turn on USB Debugging, I am stuck in the Recovery. Details of my situation are in this thread I posted. http://forum.xda-developers.com/showthread.php?t=2726985
Click to expand...
Click to collapse
Same issue here. In the command prompt, anything I do returns the unauthorized device error.
EDIT- I'm going to try and sideload a custom ROM, and then flash the stock ROM after setting USB debugging to see if that helps at all. I'll let you know
Joppykid said:
I can't because I cannot turn on USB Debugging, I am stuck in the Recovery. Details of my situation are in this thread I posted. http://forum.xda-developers.com/showthread.php?t=2726985
Click to expand...
Click to collapse
Please refer to the initial post. This will only work if you can access the recovery. If you cannot access recovery, this method isn't going to work. Sorry!
dtuma1980 said:
Please refer to the initial post. This will only work if you can access the recovery. If you cannot access recovery, this method isn't going to work. Sorry!
Click to expand...
Click to collapse
Did you not see what I wrote? Recovery was the only thing I could access. This method didn't work because the RSA Token wasn't authenticated on my computer any longer. My phone was bricked. I now have a new one. Lesson learned. Make sure you have USB debugging on with an RSA token on your computer at all times.
Did you end up wiping the internal SD with the process? I am in a similar situation except I don't have a friend like you to help me out haha.
Joppykid said:
My ADB keeps saying that my phone is unauthorized ;( I can only access .zip. Anyone else have this issue? Have tried multiple drivers, Sideload is the only thing that works.
Click to expand...
Click to collapse
I factory wiped/reset my phone is CWM which got my phone to be recognized as in recovery.
I can't get past the adb shell commands to work. it keeps saying 'dd: can't open '/data/local/tmp/aboot.img' : Not a directory
I tried with the double quotations and without to see if the command would work thinking I was messing up the syntax.
perfect just saved my a$$. ota took for the 24a update. found this and i am back where i was.awesomes

Categories

Resources