Related
Hey all,
I'm a newbie to cell phone mods, the question has probably been asked before, I searched for a couple of days but cannot find how to switch OS (WM6 pro) to English.
The phone works with Canadian sim card, just have a hardtime with French version.
Could anyone point me in the right direction?
Do I need to install a new OS?
Read something somewhere about modifying Rom, but not excatly sure how to do that.
Any help would be appreciated.
I am located in Canada, HTC touch Elf comes from France.
Thx!
P.S
I have MSN & Skype, if that would be easier
Flashing you HTC Touch from French ROM to any other ROM
Hi,
If you understand French, follow the link below. It has everything you need to flash your Touch
http://win-mobile.forumpro.fr/htc-p3450-htc-touch-elf-f40/tuto-bien-flasher-son-touch-elf-et-elfin-t14638.htm
Had a French ROM when I bought my ELF, flashed to Blue Elves 5.0 without any problems, then went on to try other ROMs, just make sure you got the proper flashing procedure sorted - all in the WiKi.
ryan.ragoo said:
Hi,
If you understand French, follow the link below. It has everything you need to flash your Touch
http://win-mobile.forumpro.fr/htc-p...ien-flasher-son-touch-elf-et-elfin-t14638.htm
Click to expand...
Click to collapse
I think the OP already stated they have a hard time with French.
Everything you need in terms of resources, ROMs, software etc can be found right here, on this site. All you need to do is do some reading.
enigma1nz said:
I think the OP already stated they have a hard time with French.
Everything you need in terms of resources, ROMs, software etc can be found right here, on this site. All you need to do is do some reading.
Click to expand...
Click to collapse
dear can u help me to update my elfo100 to english rom when i update elfo100 then give error that invalid vendor id plz give me some useful and simple trick to do that image version is 2.27.164.2
gsmexpert1:
Please read the stickies in the rom section, or the elf wiki. These have your answer.
You'll want to CID unlock, dump your current rom etc, and flash a WWE rom (onyx etc.) Make sure you run DSIXDAs device_Info.bat so you know what you are dealing with easier, and also to make sure if it is genuine HTC.
Thread necromancy ftl....
Hey everyone, i just got a ne HD2 and i was wondering how to flash roms which one is the best, kinda confused on my model type and from what i read that determins what rom you would use. I Now how to flash roms and root the hero but im new to WM. So could someone help me out and one other thing can i flash back to stock rom if needed and if so how and where can i get the rom from
jimmyeason said:
Hey everyone, i just got a ne HD2 and i was wondering how to flash roms which one is the best, kinda confused on my model type and from what i read that determins what rom you would use. I Now how to flash roms and root the hero but im new to WM. So could someone help me out and one other thing can i flash back to stock rom if needed and if so how and where can i get the rom from
Click to expand...
Click to collapse
There's a sticky thread at the top of this forum section titled "Read before posting..." You should, um, read it. Before posting. And the quote in my sig, too.
And...you're on Sprint but you have a new HD2?
i get that but confused on the model number i got that thread posted by mskip states first step is for model id PB811200 i have those numbers in my id number but theres a NM in the begining and i have one less 0 i just wanna make sure the first method
here is the video on youtube, this will tell you step by step how to instal HSPL and flash Rom
jimmyeason said:
i get that but confused on the model number i got that thread posted by mskip states first step is for model id PB811200 i have those numbers in my id number but theres a NM in the begining and i have one less 0 i just wanna make sure the first method
Click to expand...
Click to collapse
Yes the one less 0 is ok, I think it might be a typo in the first post, I dunno...my US Tmobile unit says PB81120.
Does yours have a carrier label on the case or on the ROM maybe? I'm not sure what "NM" means, but it sounds to me like you have the euro or the Telstra version, and not the Tmo US version.
I'm looking to install HSPL and a custom rom on my hd2.
Can't seem to find answers to my questions because there are so many random threads posted... and I have already tried using the search option to find the answers to my questions... so I'm left with just posting another thread!
1. What is the difference between the "HTC Leo: HD2" and the "HTC HD2" besides one is from the UK and the other one is in the USA? Why do they call one the LEO?
2. When I am in the bootloader screen checking the SPL version of my HD2, how the crap do I exit the bootloader? Is the only option to pull the battery? That's kinda silly.
3. The tutorial for flashing your first rom has a title of the following: [TUT] Flashing your First GSM USA 1024LEO ONLY!! (For Noobs)
This thread is located in the Tmobile USA HTC HD2 and the title says GSM USA....referring to the Tmous HD2 and then it says 1024LEO ONLY!!! I know I have the 1024MB version of the USA HD2 but why does the title say 1024LEO then? They are two different HD2's last time I checked and there is a whole other forum for flashing the LEO's rom. Is this a typo in the title?
4. What's the difference between HSPL2 and HSPL? Which one do I use? In the original HSPL thread there are two different zip files to download.
I will remember the rest of my questions after I get these ones answered. Any help is appreciated!
1. LEO is code name of Touch HD2
2. That the only way I know of.
3. See 1
4.you only use HSPL2_1024_RUN.exe
justwonder said:
1. LEO is code name of Touch HD2
2. That the only way I know of.
3. See 1
4.you only use HSPL2_1024_RUN.exe
Click to expand...
Click to collapse
If LEO is code name of Touch HD2 then how can we tell the difference between UK HD2 and USA HD2?
srt4cab3 said:
If LEO is code name of Touch HD2 then how can we tell the difference between UK HD2 and USA HD2?
Click to expand...
Click to collapse
If I answer your question, will I get the thumb down again?
srt4cab3 said:
If LEO is code name of Touch HD2 then how can we tell the difference between UK HD2 and USA HD2?
Click to expand...
Click to collapse
They are both Leos. The USA model has 1024mb ROM size and has green call button and red end button. The euro/uk model has 512mb ROM size and all buttons are white... no color.
justwonder said:
If I answer your question, will I get the thumb down again?
Click to expand...
Click to collapse
haha no just be more detailed about your answers.
just seemed like you want to get your "reply" stats up
zarathustrax said:
They are both Leos. The USA model has 1024mb ROM size and has green call button and red end button. The euro/uk model has 512mb ROM size and all buttons are white... no color.
Click to expand...
Click to collapse
ok thanks. but if they are the same, besides the rom size, then how come you have to be specific with which rom you put on which version?
justwonder said:
If I answer your question, will I get the thumb down again?
Click to expand...
Click to collapse
and sorry... i am already frustrated... and when you just put quick short answers, it just didnt really help
srt4cab3 said:
ok thanks. but if they are the same, besides the rom size, then how come you have to be specific with which rom you put on which version?
Click to expand...
Click to collapse
The USA HD2 with 1024rom has to use a rom that has a 2.xx base because the earlier roms made for the 512mb rom devices doesn't recognize the 1024mb rom and that causes problems. Same thing with the radios... you need the T-Mo USA radios because of the updated specs. The euro 512mbROM HD2s can use any rom or radio... it's just our newer updated USA HD2s need ROMs and Radios that recognize the updated specs. Otherwise, they are the same devices and can use the same apps, etc.
if it helps, i followed the noob guide and flashed hspl and a rom successfully. I'm about to reflash an updated version of the rom. just read the directions carefully and you probably won't go wrong. i say probably because i almost bricked my phone because i was an excited idiot, skimmed through the instructions and downloaded the wrong hspl. lol. pm me if you have any questions dude.
srt4cab3 said:
I'm looking to install HSPL and a custom rom on my hd2.
Can't seem to find answers to my questions because there are so many random threads posted... and I have already tried using the search option to find the answers to my questions... so I'm left with just posting another thread!
1. What is the difference between the "HTC Leo: HD2" and the "HTC HD2" besides one is from the UK and the other one is in the USA? Why do they call one the LEO? They are both LEO (1024LEO 1024MB RAM) & (512LEO 512MB RAM)
2. When I am in the bootloader screen checking the SPL version of my HD2, how the crap do I exit the bootloader? Is the only option to pull the battery? That's kinda silly. (Try the soft reset button also)
3. The tutorial for flashing your first rom has a title of the following: [TUT] Flashing your First GSM USA 1024LEO ONLY!! (For Noobs)
This thread is located in the Tmobile USA HTC HD2 and the title says GSM USA....referring to the Tmous HD2 and then it says 1024LEO ONLY!!! I know I have the 1024MB version of the USA HD2 but why does the title say 1024LEO then? They are two different HD2's last time I checked and there is a whole other forum for flashing the LEO's rom. Is this a typo in the title? No TYPO mskip is making sure you are on the right site, serves 2 purposes 1. Be at the right place, and if your lost then get distracted before you kill your phone.
4. What's the difference between HSPL2 and HSPL? Which one do I use? In the original HSPL thread there are two different zip files to download.
I will remember the rest of my questions after I get these ones answered. Any help is appreciated!
Click to expand...
Click to collapse
Also I noticed that you asked a few questions and you stated that you have a US model so these links are for you:
These are all for Tmo US HD2 LEO1024...
Radio's see here:
http://forum.xda-developers.com/showthread.php?t=669733&page=3
The thing to remember with Radio's is that you must use a .50 radio. This is what kills almost all US HD2 phones. if you look at the radio code you will see either a .51 or a .50 in the numbers. .51 = 512 RAM .50 = 1024 RAM.
HSPL stuff see here:
http://forum.xda-developers.com/showthread.php?t=653614
You want to click the link on the page that says *HERE*
All custom ROMs which ARE NOT BASED ON 2.08+ T-Mobile ROMs WON'T WORK ON 1024LEO. (This means that you have to HSPL your phone in order to use custom ROM's)
1. Download HardSPL package from *HERE* and extract to an empty folder
List of ROM's that are tested for the US model (Tmo US HD2 1024LEO)
http://forum.xda-developers.com/showthread.php?t=653114
(Make sure that if you download a ROM and it has a radio included in it you see the above about radios.)
Hope this is clear enough.
Nibbley15 said:
.51 = 512 RAM .50 = 1024 RAM.
Click to expand...
Click to collapse
..51.. = 448 RAM ..50.. = 576 RAM
dont confuse ROM and RAM
Just remember two basic rules on a TMOUS version:
don't flash anything below a 2.10 based ROM
don't flash a xx.51.xx radio
and everything else will be fine. Those are deadly to the TMOUS version. The Euro version seems so much more flexible in this regard.
flashing from the new t-mo upgrade
Nibbley15 said:
Also I noticed that you asked a few questions and you stated that you have a US model so these links are for you:
These are all for Tmo US HD2 LEO1024...
Radio's see here:
http://forum.xda-developers.com/showthread.php?t=669733&page=3
The thing to remember with Radio's is that you must use a .50 radio. This is what kills almost all US HD2 phones. if you look at the radio code you will see either a .51 or a .50 in the numbers. .51 = 512 RAM .50 = 1024 RAM.
HSPL stuff see here:
http://forum.xda-developers.com/showthread.php?t=653614
You want to click the link on the page that says *HERE*
All custom ROMs which ARE NOT BASED ON 2.08+ T-Mobile ROMs WON'T WORK ON 1024LEO. (This means that you have to HSPL your phone in order to use custom ROM's)
1. Download HardSPL package from *HERE* and extract to an empty folder
List of ROM's that are tested for the US model (Tmo US HD2 1024LEO)
http://forum.xda-developers.com/showthread.php?t=653114
(Make sure that if you download a ROM and it has a radio included in it you see the above about radios.)
Hope this is clear enough.
Click to expand...
Click to collapse
Wow. Your explainations were very clear. I was wondering if you could provide just a bit more assistance. I did the new t-mo upgrade. I like everything about it EXCEPT for the touch sensitivity. It is the worst. I am going to break the screen trying to get it to respond. I read several places that if you did the upgrade then you CAN'T flash to a custom ROM. Is that true? I not, could you assist me with flashing off o the upgrade to something else? Thanks in advance.
Nibbley15 said:
Also I noticed that you asked a few questions and you stated that you have a US model so these links are for you:
These are all for Tmo US HD2 LEO1024...
Radio's see here:
http://forum.xda-developers.com/showthread.php?t=669733&page=3
The thing to remember with Radio's is that you must use a .50 radio. This is what kills almost all US HD2 phones. if you look at the radio code you will see either a .51 or a .50 in the numbers. .51 = 512 RAM .50 = 1024 RAM.
HSPL stuff see here:
http://forum.xda-developers.com/showthread.php?t=653614
You want to click the link on the page that says *HERE*
All custom ROMs which ARE NOT BASED ON 2.08+ T-Mobile ROMs WON'T WORK ON 1024LEO. (This means that you have to HSPL your phone in order to use custom ROM's)
1. Download HardSPL package from *HERE* and extract to an empty folder
List of ROM's that are tested for the US model (Tmo US HD2 1024LEO)
http://forum.xda-developers.com/showthread.php?t=653114
(Make sure that if you download a ROM and it has a radio included in it you see the above about radios.)
Hope this is clear enough.
Click to expand...
Click to collapse
Yeah that's pretty clear and it helps... but a couple of questions. Where is the soft reset button that you are referring to? And also, what is the difference between HSPL and HSPL_2 on that HSPL page that you linked?
srt4cab3 said:
Yeah that's pretty clear and it helps... but a couple of questions. Where is the soft reset button that you are referring to? And also, what is the difference between HSPL and HSPL_2 on that HSPL page that you linked?
Click to expand...
Click to collapse
eh forget it... i think i figured it out. lol
srt4cab3 said:
eh forget it... i think i figured it out. lol
Click to expand...
Click to collapse
Wow arrogance and ignorance...
Only shows you haven't read the threads in this forum because the answers to your questions have already been answered EONS ago.
Dude I am so glad you asked these questions, I was searching all the posts trying to find the EXACT answers you were looking for. It would help to include a simple explaination on how to tell the two versions apart, and a simple instruction on entering the bootloader to find the version PB81120 AND SPL version, it is even more confusing when I could not and still can not find anywhere on my phone where it says 1024mbROM,(mine says flash size 1024mb) or where it says(1024leo). I am a noob but I found the guide for noobs hard to follow so I am glad I found answers here, I am sure I will get pounded by others who tell me why I should have been able to understand it better or why I should not even try to flash a rom if I am that dumb, hey, I am just trying not to brick my phone here, I dont want to seem ungrateful, I do appreciate everybodys hard work on this site and I realize they work for donations. So I do want to give a big thanks to all the contributors for a great site, I just thought I would also let somebody know how much this posting has helped me too.
doityoureself said:
Dude I am so glad you asked these questions, I was searching all the posts trying to find the EXACT answers you were looking for. It would help to include a simple explaination on how to tell the two versions apart, and a simple instruction on entering the bootloader to find the version PB81120 AND SPL version, it is even more confusing when I could not and still can not find anywhere on my phone where it says 1024mbROM,(mine says flash size 1024mb) or where it says(1024leo). I am a noob but I found the guide for noobs hard to follow so I am glad I found answers here, I am sure I will get pounded by others who tell me why I should have been able to understand it better or why I should not even try to flash a rom if I am that dumb, hey, I am just trying not to brick my phone here, I dont want to seem ungrateful, I do appreciate everybodys hard work on this site and I realize they work for donations. So I do want to give a big thanks to all the contributors for a great site, I just thought I would also let somebody know how much this posting has helped me too.
Click to expand...
Click to collapse
Flash = Flash ROM
You Will want HSPL3
1024leo, means it is Leo(the code name for this device) With 1024ROM(flash)
All this info is in this Thread
Quoting from that thread are the instructions for how to go into the bootloader
*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows the SPL or HardSPL you installed*
Click to expand...
Click to collapse
Hope that helps and gets you started .....
Just read read read, not everyone takes to this stuff like a fish to water, but just like anything else, if you don't feel comfortable doing it , don't. No amount of tutoring is going to be able to fix a bricked phone. So be careful , but have fun ...
p.s. I don't work for donations ... Freebie all the way ....
Hello Everyone,
I need some help and I would appreciate some feedback. Hope I wouldn't have to bore you with a lot of questions here. I just bought an HTC HD2 mobile phone (Model: T8585) WinMo 6.5 Professional with the following software specs:
SPL: SPL 1.66.0000 XE
ROM Version: 1.72.162.0 GER
Radio : 2.07.61.22_2
Protocol Version: 15.32.50.07U
OS Version: 5.2.21869
The problem is that the OS is in German and I want to change this to English. The phone is not locked to any network. I can use any mobile operator's simcard. In fact, I am currently using O2 simcard, although I bought the phone from vodafone germany. The thing is that it looks like the hardware is locked to vodafone's custom german OS, I tried to install an english OS and it failed with an error like "invalid ID" or something. I have read through a few threads here but I thought of explaining my situation here first before proceeding with anything.
So my first question is, can I use the HSPL3 in this case and what kind of ROM will I be able to flash my htc hd2 with after HSPL3? Secondly, can I still maintain my radio software without flashing a new one after hspl3? Thirdly, what's the difference between a cooked rom and a stock rom? Lastly, when a phone is bricked, does it also mean the phone is dead? Can a dead phone be reversed?
I am sorry but I'm a little bit new with HTC. It's my first smartphone actually The first 2 questions are the most important of all.
Thank you and I look forward to hearing from you
Bisoo
Dear user, first of all welcome on xda.
Secondly tray to use the search option, so the next time you don't need to wait till someone answer you.
A lot of new users have mostly the same question, so the answer was alreddy bean given in the past.
But okay, Now I'm replaying your questions, way not help you out.
About your question if you like to stay on stock Rom, but you will have a other language take a look on this thread, read and follow the instructions and all will become Okay.
http://forum.xda-developers.com/showthread.php?t=642486
Fore your latest question about the deferent between Stock Rom and Custom Rom, well the there are deferent builders, but the idea is the same. building a Rom with the latest packaging and build on the needs of the followers.
So you will see and find lot of different, the biggest different between the custom Rom's is style!
Take a look on this thread fore finding custom Rom's and read the sticky threads first! there is a lot of usfull information on it.
http://forum.xda-developers.com/forumdisplay.php?f=534
Fore replaying your question about HSPL, this will depends of your choice of your Rom, some Rom builders will advice you to use HSPL2 (1.66) some will advice you HSPL3 2.08, ... it depends of the Rom, and the conclusion of the Rom builder based on his test's.
I hope you have now some more information,
Best
Kurt
kurt-willems said:
About your question if you like to stay on stock Rom, but you will have a other language take a look on this thread, read and follow the instructions and all will become Okay.
http://forum.xda-developers.com/showthread.php?t=642486
Click to expand...
Click to collapse
this method will work, but requires making a gold card which isn't free.
much easier to use hspl and then flash a stock rom in your preferred language.
if i were the op i would
1 install hspl2,(hspl3 offers nothing that hspl2 can't do, hspl3 is not "better" or a higher version, it just supports tmous phones, that's all. hspl2 is more useful to regular hd2 users.)
choose either 1.66.hspl or 2.08.hspl, doesn't really matter, you can change it whenever you like.
2 flash the rom of your choice.
you can also search for UK serial and download and flash the latest rom that way, again a search will find all you need
I am so pleased with your feedback. I guess I should have taken some time to go through all the threads on this site, instead of creating a thread which has questions which have already been answered on older threads. But I appreciate your responses
I have to admit that whoever created Hspl is just genius. I followed hspl3 installation guide and now I have been able to flash an European stocked WWE ROM (english) on my german carrier ROMed HTC. I took the S/N from one of the links Kurt provided. It's perfect now, although I am still a bit cautious and hoping nothing happens to my phone. I read a few scary threads here where some people, after some days, complained that their phones died after flashing with hspl. But I have the feeling that if one follows the steps correctly and consider the requirements keenly, probably nothing will happen. That's what I did.
Thanks a lot to you and all the guys who've contributed one way or the other on this site. I am sure I'll be back, maybe not with questions but contributions Thank you so much.
Bisoo
my phone is a T-Mobile USA HD2 ,I want change my phone language into russian.Can I use this rom? RUU_Leo_S_HTC_RUS_3.14.411.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
If not ,who can give me a rom,thanks
If you wan't a nice shiny brick, then by all means, flash away! Read the stickies for info on what you need.
you need to read the thread on how to flashing your rom