vibrate notification icon stuck - Dash 3G, Snap General

i have a maple i turned on vibrate and after tuning off vibrate the icon is still showing at the top beside the battery icon. how can the icon be removed, i have tried soft reset. any ideas thanks

hard reset

gnick666 said:
hard reset
Click to expand...
Click to collapse
not necessary.
just set to normal profile then go to settings, sound and under ring, you should see "vibrate" which is not what you desired. change it back to your ringtone and you're done.

also keep in mind that if you have any sort of ringtone manager like ringo or photo contacts those might be the culprit. I have ringo and because it overrides windows defaults it sets them to silent so IT can control your rings and alerts.

zzyzx80 said:
not necessary.
just set to normal profile then go to settings, sound and under ring, you should see "vibrate" which is not what you desired. change it back to your ringtone and you're done.
Click to expand...
Click to collapse
thanks this solved the problem

Related

Pocketmax Phonealarm 1.54 problem

Phonealarm 1.54 is superb, but it's casuing me a very annoying problem, and I don't know why:
I like to have my phone set to "Vibrate" at all time. By that, I mean clicking the little speaker at the top of all WM5 devices and where you get the 2 sliders for volume of device and phone, at the bottom it has "On", "Vibrate" and "Off".
However since I installed Phonealarm my phone always reverts back to "On" - but I can't seem to work out why, there's no pattern to it - sometimes it just sits there on Vibrate, then next time I use the phone it's back to On. I can't seem to work out if things like going into the Phonealarm setup menu causes it, or clicking an alert in Phonealarm, or whatever - it just seems that after a while it'll revert to "On" without me asking it to, and it's only been happening since I installed Phonealarm.
Any ideas?
phoneAlarm 1.54
Its hard to say with this programme. The developer has built so much into this excellent app for so may devices, there always seems to be one problem or another. I would post a question in the support forum (www.pocketmax.net). Bruce (the developer) is pretty responsive. He may ask you to send a log ad he will try and fix in next version. I am waiting for 1.55, due out on the next few days
Regards
Chris
I believe you need to put the option to vibrate in all profiles. For exampe in the settings screen, if you go to a particular profile then click on sms notification you need to tick the vibrate option. To get it working on the ring tone as well set the ring option in profiles to "Vibrate and Ring". Remember to do this for all alerts for all profiles!
I believe you need to put the option to vibrate in all profiles. For exampe in the settings screen, if you go to a particular profile then click on sms notification you need to tick the vibrate option. To get it working on the ring tone as well set the ring option in profiles to "Vibrate and Ring". Remember to do this for all alerts for all profiles!

A way to have alarm sound when on silent/vibrate?

Maybe there is a way to do this, but I'm not aware - does anyone know of a way to enable alarm even when teh phoen is on vibrate or on silent? (this came to me because I set the phone to silent and forgot to turn I was late for work today)
enAlarmPPC
When you mean an application for alarms, then you should really take a look at enAlarmPPC. You can simply force a volume, and it will play sound even if in "vibrate" or "mute".
awesome... I think that's exactly what I need. Thanks
i use vibrate mode all the time, but don't like the fact that it silences your phone. But this is what i have found:
Instead of going into vibrate mode through comm manager or through a "profile" (like from the HTC Touch Today plugin), go to settings and then select Sounds and Notifications. Select Notification tab, and from the drop down menu select Phone: Incoming call and select vibrate. When you do this, your phone vibrate when there is an incoming call but is not silenced for other functions of the phone like alarms, music, etc.
Disadvantage is that it is not 1 simple step, so if you back and forth between ring and vibrate it is not ideal, but if you set it on vibrate all the time like me, it is ideal.
superflysocal said:
i use vibrate mode all the time, but don't like the fact that it silences your phone. But this is what i have found:
Instead of going into vibrate mode through comm manager or through a "profile" (like from the HTC Touch Today plugin), go to settings and then select Sounds and Notifications. Select Notification tab, and from the drop down menu select Phone: Incoming call and select vibrate. When you do this, your phone vibrate when there is an incoming call but is not silenced for other functions of the phone like alarms, music, etc.
Disadvantage is that it is not 1 simple step, so if you back and forth between ring and vibrate it is not ideal, but if you set it on vibrate all the time like me, it is ideal.
Click to expand...
Click to collapse
You could probably Mortscript it...
yea, the thing is I always change to vibrate when I'm at work/quiet areas and I'd liek to have a simple profile change button that changes it to a vibrate + ringer.
freakflow said:
yea, the thing is I always change to vibrate when I'm at work/quiet areas and I'd liek to have a simple profile change button that changes it to a vibrate + ringer.
Click to expand...
Click to collapse
Give PhoneAlarm a try! Then you can create profiles.
I agree, PhonaAlarm solves it all!!

Mystery vibration

Just got a TD 2. Really love it after using Eten M600 for years.
But, somethings got me stumped. Frequently the device vibrates for a few seconds without any connection to an obvious event. I've checked that the phone ringer is not set on vibrate. I also checked sound & notifications - theres no event that I can see set to vibrate. After it happens, I check the notifications - and there is no event listed there.
So what is causing this to happen?
alexdpaul said:
Just got a TD 2. Really love it after using Eten M600 for years.
But, somethings got me stumped. Frequently the device vibrates for a few seconds without any connection to an obvious event. I've checked that the phone ringer is not set on vibrate. I also checked sound & notifications - theres no event that I can see set to vibrate. After it happens, I check the notifications - and there is no event listed there.
So what is causing this to happen?
Click to expand...
Click to collapse
does it vibrate when u touch the dispaly?
No, just vibrates for no apparent reason.
No calls or events or notifications.
There must be a cause - I just cannot think what it could be.
alexdpaul said:
No, just vibrates for no apparent reason.
No calls or events or notifications.
There must be a cause - I just cannot think what it could be.
Click to expand...
Click to collapse
ok i want you to go settings on the menu bar then click on all settings to the lower left of the screenthen open system folder and scroll down to touch options open it and if the information is tick untick it and see if the problem persist
kings121 said:
ok i want you to go settings on the menu bar then click on all settings to the lower left of the screenthen open system folder and scroll down to touch options open it and if the information is tick untick it and see if the problem persist
Click to expand...
Click to collapse
Did that - box is unchecked.
Still a bit of a mystery.
Thnx for your advice thou!

Ring & Vibrate at the same time?

Hi,
I cannot seems to find a ring option that will also allow vibrate. For now, I can only choose Ring or Vibrate but not both. When I choose Vibrate profile and try to turn on the volume, it automatically change to normal. TIA.
sangweb said:
Hi,
I cannot seems to find a ring option that will also allow vibrate. For now, I can only choose Ring or Vibrate but not both. When I choose Vibrate profile and try to turn on the volume, it automatically change to normal. TIA.
Click to expand...
Click to collapse
Go to settings/sound/ the third one down where it says "vibrate" put a check mark in it. You have to have the ringer volume up in order to put a check there.
Agree w/ earlier guidance.
It also depends on the ROM.
Most, but not all ROMs allow for this functionality.
I've only seen a few that didn't.
ejdavis72 said:
Go to settings/sound/ the third one down where it says "vibrate" put a check mark in it. You have to have the ringer volume up in order to put a check there.
Click to expand...
Click to collapse
I've do have that checked but I don't think it ever vibrate, in only rings.
sangweb said:
I've do have that checked but I don't think it ever vibrate, in only rings.
Click to expand...
Click to collapse
Does it vibrate for other things? Like when you turn it on or while typing?
Get Sound Manager from the market. Open it up and press menu then Vibrate Settings. Set to Vibrate Whenever Possible.
________________________________
Unrevoked forever
SkyRaider Sense 3.3.3
KiNgxKernel BFS (#5)
Radio 2.15.00.07.28

[Q] Notification Issue

Hey I am new to these forums and the CM7 ROM for the shift. I put it on last night and I am having some trouble with the notification settings. On the stock sense ROM I was able to set my notifications to vibrate when I got one, mainly a text message. On the CM7 ROM for notifications I can only put it to "no noise" at all or a ringtone, like a beep. I would like to have a vibrate option but I cannot seem to find one. I appreciate all the help. Let me know if you need any more information, thanks.
try this: go into settings then sound setting, then under general tap on vibrate and set it to always..
or u can open up ur messages then hit menu and then settings the scroll down to notifications make sure notifications are checked then go to notification settings and tap vibrate and set it to always
e240 said:
or u can open up ur messages then hit menu and then settings the scroll down to notifications make sure notifications are checked then go to notification settings and tap vibrate and set it to always
Click to expand...
Click to collapse
That worked! Thank you, I didnt even think about going about it that way.
I had this problem too...
Go to Settings>CyanogenMod Settings>Interface>Notification Power Widget
Now check "Notification Power Widget" and then go into widget buttons.
Pick whatever tickles your fancy, but make sure toggle sound is on. You can also change the types of sound in the bottom "Sound Modes" Category and you caan change the order if you hit "Back" then "Widget Button Order".
Now reboot your device and when it turns back on, slide down the notification bar and at the top there should be a toggle which looks like Vibrate/Sound/Silent and that's how you change the sound!
I am also having this issue. i have no vibrate on any text messaging or even gmail .
I have the newest cm7, have tried turning vibrate on where ever i could. Wiped and re flashed but have the same problem .
phone will only vibrate on call and when i change from silent to vibrate.

Categories

Resources