Hey everyone.
I was waiting for the update, but I did not think it was going to happen today. Anyway, I got it while I was at the mall, so I clicked yes for the system update. My epic restarted and everything and did the whole downloading phase. Then when it was about to finish, it says "An error occurred while trying to update your firmware. Please try again later." I was a little disappointed by this. so I waited....and waited...then I checked my about phone settings and it says that I have the DI18 in the baseband ver. but it says update 1 in the firmware. Could anyone else tell me what I should do?
ya you should update manually
I tried to update from the system update menu, but it still came up with the error. Any idea how I can update manually unrooted?
I manually updated and under Firmware version it still says 2.1-update1
But if you got an error message of some kind I don't think it would hurt to manually reinstall the update.
akei1 said:
I manually updated and under Firmware version it still says 2.1-update1
But if you got an error message of some kind I don't think it would hurt to manually reinstall the update.
Click to expand...
Click to collapse
Since it already says DI18 in baseband version and build number,
Would placing the update manually into the root of my SD card have any negative effects?
garreto said:
Since it already says DI18 in baseband version and build number,
Would placing the update manually into the root of my SD card have any negative effects?
Click to expand...
Click to collapse
It's the same update so it should be ok. Just dive right in and we'll work out any problems lol
ah wait. Never mind, I'm not rooted.
I've read someone got the update without having to root. They downloaded the update file, copied to sdcard root, renamed the file to update.zip, booted into samsung recovery, and applied update.zip
The thread name is DI18 update for Stock Roms Only in the Epic 4G Android Development section
http://forum.xda-developers.com/showthread.php?t=796885&page=14
Yeah this can be done with the signed file that was floating around from one of Firon's threads. You don't need to be rooted to flash that one
Sent from my SPH-D700 using XDA App
Was pushed to me OTA at around 9PM yesterday.
So after update installed and reboot, I get "checking for software update" and it's just staying there with the circling ring. Is this normal?
garreto said:
So after update installed and reboot, I get "checking for software update" and it's just staying there with the circling ring. Is this normal?
Click to expand...
Click to collapse
It should do so for about 30 seconds or less to confirm that the update is installed (really just tell you that there are no new updates.) If it still hangs, reboot.
Sent from my SPH-D700 using XDA App
So after I finished updating, once it finished booting up the phone said "there are no current updates, your software is up to date". Is this what's supposed to happen?
Sent from my SPH-D700 using XDA App
Firmware will show 2.1 update1
Build number will show sph-d700 Eclair D18
This is where the updates show, look there on About Phone
You need to boot in recovery mode and have the file named update.zip on ur sd, clear cache in recovery and then update while still in recovery. The rest does itself.
Different steps for rooted users.
Setting->about phone...to see if the update is there
Sent from my SPD700 using XDA App
Related
I just did a check for updates on my Fascinate, and it pulled down a 697KB update, SCH-I500_DH12_to_DI01. Not sure what it changes, etc.
I was able to download it, but I can't get it to install. It keeps failing. Do I have to unroot to install?
Sent from my SCH-I500 using XDA App
Not sure. Some guys in #samsung-fascinate on irc.freenode.net are going to mess around with it.
I got it. I think it installed correctly. Baseband ends in DI01 now.
Sent from my SCH-I500 using XDA App
did you lose root?
got mine really don't notice a difference..anyone else?
Sent from my SCH-I500 using XDA App & yes I'm a chick.
Just tried to trigger the update - got a Server Unavailable message. Guess they took it down??
Mine failed. Says IP previous update failed now.
the is a list of changes in one of the threads in dev section.
you have to have a stock /system to be able to apply so if you removed any bloat must put back or flash with odin
Ota will cause root lose but we have a flashable zip with root if you got clockwork running
Sent from my Clockwork Fascinate using XDA App
orateam said:
Mine failed. Says IP previous update failed now.
Click to expand...
Click to collapse
Same issue here
Mine failed as well with the following error code: "UPDATE FAILED or INCOMPLETE. reason: IP_PREVIOUS_UPDATE_FAILED."
I wasn't rooted, but I do have third party software installed. Any ideas why I can't get the update to stick?
I tried the update on my non rooted phone. I mean i've never even done anything extra to it, and i still got the update failed reason: IP_PREVIOUS_UPDATE_FAILED
I'm thinking there must be something wrong with the update.
I'm having the same issue with "IP_PREVIOUS_UPDATE_FAILED".
I was rooted+lagfixed but went back to stock using the ODin restores, still getting the above. I've tried it with and w/o CWM enabled as well.
*EDIT*: I just want to note that the phone attempts to reboot and install the update, and I can see (VERY briefly) the recovery manager attempting to apply the update. In this, I was able to see 'signature verification failed' amongst the normal messages.
Hmm, if you're running the stock recovery, and stock everything else, and you see a "signature verification failed" error, then the downloaded patch must be corrupt. I'm guessing you might need to delete the downloaded files and force it to redownload the patch, but I have no idea how to do that.
On a side note, I just applied the official patch to my rooted and lag-fixed Fascinate yesterday, by temporarily reverting to stock, and re-rooting afterward. I posted the steps I took to do this over in the development forum, for those that are interested: http://forum.xda-developers.com/showthread.php?t=792652
I called verizon and talked to tech support about the IP_PREVIOUS_UPDATE_FAILED problem, he didn't have a fix. So he said i can take my phone back to the store and have it replaced with a new one.
Anyone know where I can find the bloatware apk files? I got a little trigger happy and deleted them instead of renaming. I can't install the update until I replace them.
Any help with this...
I was rooted with lag fix and OTA installed unannounced. So I lost root as expected. Meanwhile, seems I have the update but each reboot brings the update screen back, over and over again. Baseband and build number are updated. I have rerooted, un-lag fixed. Trying to get this update to stop showing up because its KILLING my battery. Thanks for any help.
BUMPED
Hizenthorn said:
Anyone know where I can find the bloatware apk files? I got a little trigger happy and deleted them instead of renaming. I can't install the update until I replace them.
Click to expand...
Click to collapse
This link has been posted multiple times. Please search. http://forum.xda-developers.com/showthread.php?p=8450686
If your Fascinate (unrooted, cannot speak to rooted phones) will not take the update, AFAIK your only option seems to be the 30 day return policy at Verizon. Last week after over two hours in the store they finally swapped, but even that phone would not take the update. I went in today, got a new phone, and it took the DI01 update. Third times the charm.
Its updated for sure and currently rooted. When the phone reboots it says installation starts in "x" and counts down. I have to defer for 24 hrs to keep from irritating me. I may try the store for an exchange.
Sent from my SCH-I500 using XDA App
I just activated my girlfriend's phone and immediately it prompted for update, so I did. To my surprise it was not DL09, but instead EA28. So after some google searches I found this:
http://phandroid.com/2011/02/03/samsung-fascinates-ea28-update-coming-to-fix-emergency-calling-bug/
The site is basically right, they repackaged dl09 with the emergency calling bugfix and pushed it out with a new build number.
just got mine... I'm gonna have a seizure in a public place to test it out.
Does any one know if one click root will work with this update
Sent from my SCH-I500 using XDA App
Deathbeaver said:
Does any one know if one click root will work with this update
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
It worked for me on DL09 and this isn't that much different so I'd say yes.
Skrazz said:
just got mine... I'm gonna have a seizure in a public place to test it out.
Click to expand...
Click to collapse
Youtube...
The only other thing that worries me is odin I have no idea what version to get our how to use it....thanks an advance from noob
Sent from my SCH-I500 using XDA App
Deathbeaver said:
The only other thing that worries me is odin I have no idea what version to get our how to use it....thanks an advance from noob
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
There is a thread on ODIN. Simple directions, I thought.
Sent from my SCH-I500 using XDA App
So how does one "Make instantaneous emergency calls from a locked device in a time of need"?
Deathbeaver said:
The only other thing that worries me is odin I have no idea what version to get our how to use it....thanks an advance from noob
Just as a side note if your having to redo the phone from scratch make sure to put the pit file in the pit on odin otherwise the phone will not activate!
Click to expand...
Click to collapse
One Click root works just fine! Just completed root!
I believe I was able to root successfully but when I try to flash ClockwordMod, it doesn't seem to be working. ROM manager says its flashed and has the latest version, but when I boot into recovery it is definitely not ClockwordMod. I cannot do backups or choose a file from SD to install.
PantsOnFire said:
I believe I was able to root successfully but when I try to flash ClockwordMod, it doesn't seem to be working. ROM manager says its flashed and has the latest version, but when I boot into recovery it is definitely not ClockwordMod. I cannot do backups or choose a file from SD to install.
Click to expand...
Click to collapse
When you flash a new ROM it overwrites CWM, so you'll have to re-install it with Odin.
What is pit in general and why it is needed?
CNemo7539 said:
What is pit in general and why it is needed?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=771426
may answer some questions
http://forum.xda-developers.com/showthread.php?t=723596
may answer others
the search tool is great. google works too.
Update broke my phone!
I just saw a screen forcing the update upon my phone. I clicked "OK" but when the EA28 update installed itself on my phone, it locked my phone into a cycle of trying to install it again and again. The baseband version shows S:i500.04 V.EA28, the Build number shows SCH-I500.EA28, but the update keeps trying to install the update. It gives a Prompt to Install-Reboots Phone-Prompt to Install-Reboot Phone... I managed to get it to stop for a little while by scheduling a deferral of the update until tomorrow. Does anyone know how I can keep the update from trying to install?
Yeah I just went to ask if there is an update and it said yes. Afraid to update because who knows if it'll break root....
Sent from my SCH-I500 using XDA App
Why suggest people to mess with pit in odin? You do NOT need to do this. Geez, people make this mistake enough on their own. Pda, choose file, press start... thats it.
Sent from my stock 2.1 unrooted, fully bloated Fascinate
EA28 broke my phone
knmb323 said:
I just saw a screen forcing the update upon my phone. I clicked "OK" but when the EA28 update installed itself on my phone, it locked my phone into a cycle of trying to install it again and again. The baseband version shows S:i500.04 V.EA28, the Build number shows SCH-I500.EA28, but the update keeps trying to install the update. It gives a Prompt to Install-Reboots Phone-Prompt to Install-Reboot Phone... I managed to get it to stop for a little while by scheduling a deferral of the update until tomorrow. Does anyone know how I can keep the update from trying to install?
Click to expand...
Click to collapse
I managed to get my phone to stop rebooting every 3 minutes by ending the InnoPath Active Care process and clearing the cache. But when I woke up this morning, the phone was at the emergency recovery screen. It went into a cycle of rebooting that made it as far as media scanner. I got it to stop rebooting by turning ON wifi (I suppose that's because Active Care needs WiFi off to do an OTA). Does anyone have any suggestions on how to stop this "Feature" that is rebooting my phone?
You tried pulling the battery (soft reset) i presume? After that theres factory rest, then odin back to stock
Sent from my stock 2.1 unrooted, fully bloated Fascinate
Ok i've searched the forums and am getting more and more confused. I have gingerblur 3.1 installed currently and would like to do the ATT ota update. Can I just download it and install from the system update? Or do I need to wipe the whole phone clean and start over? Thanks and sorry if this is a duplicate.
I am wondering this too...
Sent from my MB860 using XDA Premium App
I'm in the same boat, I got GingerBlur 4.5 installed and I would like to install the Gingerbread 4.5.19 OTA update. Are there proper instructions out there? I can't find any. I'm assuming I may have to go back to Stock 1.8.3 and do an OTA update. But can someone please confirm. Any instructions would help as well. Thanks
The directions I seem to need are...
Un gingerblur
Un root
As an aside, I got notified of the ota and it failed.
Sent from my MB860 using XDA Premium App
goofyj8 said:
I'm in the same boat, I got GingerBlur 4.5 installed and I would like to install the Gingerbread 4.5.19 OTA update. Are there proper instructions out there? I can't find any. I'm assuming I may have to go back to Stock 1.8.3 and do an OTA update. But can someone please confirm. Any instructions would help as well. Thanks
Click to expand...
Click to collapse
Make sure your battery is fully charged so that you don't run out of power during the upgrade process.
To install the upgrade:
Copy the file to the SD Card
Your phone is on the latest Android 2.2 software (Blur_Version.4.1.83.MB860.ATT.en.US)
From the home screen, press Menu, select Settings,
Scroll down and select About Phone.
Select System upgrades.
After a couple of minutes, your device will confirm the upgrade is available.
The Copy prompt will appear. Select “Copy”
The Install upgrade prompt will appear. Select Install Now.
Your device will power off and display installation progress.
IMPORTANT INFORMATION:
Please ensure you are aware of the following information after the installation of the package
It will then power up and stay on the carrier logo for up to 5 minutes before powering on to the home screen.
Please do not interrupt this process.
Contacts and email from Google and MOTOBLUR may take up to 60 minutes to synchronize. The phone may appear slower during this initial synchronization process
I am in the same boat as that guy with gingerblur 4.5 .
I don't have an sd card around me atm so would putting the file on the internal storage work or not?
ALSO if I update this way, will it delete all of my media and apps? thanks
ota update to gingerbread
damonsmith666 said:
I am in the same boat as that guy with gingerblur 4.5 .
I don't have an sd card around me atm so would putting the file on the internal storage work or not?
ALSO if I update this way, will it delete all of my media and apps? thanks
Click to expand...
Click to collapse
please just wait for a dev to answer this question or we may brick or worse lose root forever (ohh noo) seriasly just be calm a work around will be comming soon
I will wait...
Sent from my MB860 using XDA Premium App
same issue here
i tried to install the OTA update, it failed... tried to install it manually and it didn't work either. i tried to install it using android recovery and it didn't work.
Im using gingerblur 4.5
side note,
can any one of you please provide the full name of your system version? mine says "Version.4.1.83.MB860.ATT.en.US ", thing is, I tried to flash a stock sbf to roll back to motoblur, RSDlite fails every time with a message "sec_exception febe 35 35", my phone isn't recognized as 'NS Flash Olympus', it shows 'SE Flash Olympus'.
is there a thread to fix this issue?
thanks!
I figured out how to do it. First I unlocked the bootloader and then followed the directions on here.
http://forum.xda-developers.com/showthread.php?t=1163342
Worked fine
You need to flash back to stock, i.e. flash 4.1.26 or 4.1.57 or 4.1.83. OTA update to 4.1.83 if you are on an earlier version. The update will not work if you are modded in any way. You need to be on stock 4.1.83.
My god, how many times does this have to be said!!!
So let's just say that you are a moron (like me) and just did the OTA over Gingerblur 4.5 and now you have the exclamation point triangle and android on your screen and it does do anything... is it safe to battery pull? or did I just brick my phone?
EDIT: nevermind...
Is there any guide how to flash back?...
Sent from my MB860 using XDA Premium App
Well you could use rsd if you've never installed the GB ota.
Sent from my MB860 using XDA Premium App
Update, now problem
I was on gingerblur 4.5, rooted, sideload enabled.
used RSD to flash 4.1.83 - successful - booted - checked mail - etc...
went to Motorolla.com and DL the official firmware
copy .zip to sd
settings/about/upgrade
let it run
followed instructions to the letter from Motorola
30 minutes now on the Rethink Possible screen - seems like a fail?
Help?
Update - she lives, just needed to wait about 45 minutes
Ya, malaysia pull down 3.2
second that.. malaysia received the OTA update
I received the notificatioj just now, waiting to update it tomorrow using wifi
Anybody know what are the major upgrades for 3.2 other than adjustable widgets
Is this for A500 or A501
Sent from my PG86100 using Tapatalk
It is A500.
I hope we see that in US soon.
do you have any links by any chance?
I think I'd wait for root before updating
Sent from my A500 using XDA Premium App
After update from 3.1 to 3.2 for my A500, My Papago M8 which run smoothly on 3.1 at 1280x800 resolution, now just dont run on 3.2, it complains that the device is on 1280x752 resolution!
Anyone in the US getting the update yet?
Invalid system update
I have unrooted then rebooted, but still constantly getting invalid system update cancelled message. Any suggestions?
tariche said:
I have unrooted then rebooted, but still constantly getting invalid system update cancelled message. Any suggestions?
Click to expand...
Click to collapse
I'm getting the invalid update too. I have never rooted my Iconia A500.
Please rename the thread
Will we loose root if we do the OTA update?
mshnayde said:
Will we loose root if we do the OTA update?
Click to expand...
Click to collapse
Yes
Sent from my PG86100 using Tapatalk
gmfeny said:
Yes
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Is there a way to update to 3.2 without loosing root.
Seems like we don't have a way to root it again afterwards.
Sorry newbie to the Tablet world.
Can someone getting the update please pull the link or give before and after version numbers?
bigmacpaddy said:
I'm getting the invalid update too. I have never rooted my Iconia A500.[/
is this error during download or installing in recovery.do you have cwm installed.
Click to expand...
Click to collapse
erica_renee said:
is this error during download or installing in recovery.do you have cwm installed.
Click to expand...
Click to collapse
This error comes up after the download completes and it says "preparing update" I don't have any extra Recovery installed. Completely stock 3.1 A500
just an idea
Go intto settings, manage apps, all apps - find the system updater and clear it's data, reboot, should reprompt download and may work.
May not. Worth a shot
so is it pull down loh for anybody in Europe/US yet?
Anyway, regarding invalid update I finally managed to pass the invalid system message. BUT, when it rebooted and started updating suddenly it stopped and showed exclamation traffic sign over droidbug in a middle of the updating.
Rebooted and it just reported failed update.
So I guess we have to be patient, eventually it will work.
For those who are on stock rom and never rooted, I recommend to root,then CWR and backup, cause if it happened that I could not boot after unsuccessful update there is backup, so no sweat.
i tried to update my phone manually to the KitKat updat by going to Update Samsung Software but it just says the system is up to date.
i just went stock using the MK2 tar file and odin.(cleared data too)
what am i not doing/doing wrong?
and when i pluged it into kies it said that the firmware is up to date........
Edit: I sideloaded the Update and im on the 4.4.2 Right now.
the sideload is here:
http://androidromupdate.com/2014/02/16/install-stock-l720vpufnae-4-4-2-kitkat-galaxy-s4-l720-sprint/
It sounds like your carrier isn't pushing the 4.4 version for your device yet.
Sent from my SGH-M919 using xda app-developers app
Its simple. The update hasn't made it to your phone yet. You have to be patient if you don't side load it. My brother just got it this morning.
Sent from my SPH-L720 using Tapatalk
maxter5080 said:
i tried to update my phone manually to the KitKat updat by going to Update Samsung Software but it just says the system is up to date.
i just went stock using the MK2 tar file and odin.(cleared data too)
what am i not doing/doing wrong?
and when i pluged it into kies it said that the firmware is up to date........
Click to expand...
Click to collapse
You can check the "sprint zone" app, click my device then dashboard to see if the update is ready for you. If the update is ready then you will see "update now", and if not then it may not be ready for you yet. you may see "update now" and click it and it may show that you are up to date. you have two options...(1) go to settings> application manager> all> google services framework and clear cache/data, then go and check for the update. if you do that a few time you will get the update i promise, but you will run the risk of breaking location services on your phone...or (2) just wait until you see that your phone already downloaded the kitkat update and jus install it whenever it comes.