Database Users

No Speed Dial w/ Froyo?

so what's the deal with no speed deal in froyo. i haven't really seen any mention of it by anyone else. i've installed the regular foyo and now again just installed the clockwork version of froyo (after a data wipe) and both couldn't retain phone numbers in the speed dial list.
is there a way we could extract a db or file and manually edit our speed dial lists since it doesn't seem to work setting it up on the phone itself?

wow... can't believe no one's responded.
maybe i should rephrase the question/concern:
does your speed dial work with froyo?
maybe i'm the only one having problems.

You might want to wait more than six hours before flipping out. Not everyone lives on these forums.

actually i'm far from flipping out... but thanks officer
it is what it is really... i was just surprised is all.

Works for me, just tested it out.
Method that works for me:
-Go to Dialer.
-Hold the number you want to map someone to (in my test case, #2)
-When prompted, select the number you want assigned
-Exit Dialer
-Reboot phone
-Re-enter dialer
-Test call

byproxy said:
so what's the deal with no speed deal in froyo. i haven't really seen any mention of it by anyone else. i've installed the regular foyo and now again just installed the clockwork version of froyo (after a data wipe) and both couldn't retain phone numbers in the speed dial list.
is there a way we could extract a db or file and manually edit our speed dial lists since it doesn't seem to work setting it up on the phone itself?
Click to expand...
Click to collapse
it works for me
Like DivinityCycles stated:
1. Go to Dialer.
2. Hold down number you want to map someone to.
3. Select the number you want assigned.
4. Check by holding down number.
or the regular way, but dont search for the contact; seems it doesn't work that way, just scroll to the person you want assigned to that number.
both methods has worked for me. hope this helps.

dr154 said:
it works for me
Like DivinityCycles stated:
1. Go to Dialer.
2. Hold down number you want to map someone to.
3. Select the number you want assigned.
4. Check by holding down number.
or the regular way, but dont search for the contact; seems it doesn't work that way, just scroll to the person you want assigned to that number.
both methods has worked for me. hope this helps.
Click to expand...
Click to collapse
awesome!!! thanks to the both of you (the one's that actually helped)!!
the problem was that i was searching for the contact to add. doing a scroll search and adding that way is what worked. thanks again folks! much appreciated!!

no problem. glad we could be of some assistance...

dr154 said:
it works for me
Like DivinityCycles stated:
1. Go to Dialer.
2. Hold down number you want to map someone to.
3. Select the number you want assigned.
4. Check by holding down number.
or the regular way, but dont search for the contact; seems it doesn't work that way, just scroll to the person you want assigned to that number.
both methods has worked for me. hope this helps.
Click to expand...
Click to collapse
Interesting, running KaosFroyo 31, when I go into my dialer (ie phone? where I'd call somebody from, correct?) and hold down a digit it doesn't do anything w/a long press, even a super long press.
OK, just learned via a Google search that LP hides the "dialer" - are there dialers (free) on the market, or is there a way for me to access dialer on an LP phone?
PS - Should note I'm running an Eris w/2.2 Kaos 31 on it, but I don't think that'll make a diff

I'm in the same situation in which chimpsnest is (even a super long press to the number doesn't trigger any pop-up) but googling didn't helped me.
Any help from your side ?

the gladiator said:
I'm in the same situation in which chimpsnest is (even a super long press to the number doesn't trigger any pop-up) but googling didn't helped me.
Any help from your side ?
Click to expand...
Click to collapse
I had the same problem on cm 6.1. I found that I had to push the number I wanted to assign, then hit the + sign on bottom left and the contact list pops up, then pick the contact to assign to the number. Hope that helps, if you still haven't fixed it.

DivinityCycle said:
Works for me, just tested it out.
Method that works for me:
-Go to Dialer.
-Hold the number you want to map someone to (in my test case, #2)
-When prompted, select the number you want assigned
-Exit Dialer
-Reboot phone
-Re-enter dialer
-Test call
Click to expand...
Click to collapse
Doesn't work in VM Samsung Intercept 2.2 froyo
:\

[Q] nexus 4 issue

hello
i'm looking for an app or mod to make the phone vibrate when the call is connected.tried call vibrate,but it does not work with nexus 4.
thank you

54 views and no reply?

cturbos said:
54 views and no reply?
Click to expand...
Click to collapse
why would you want your phone to vibrate when a call is connected?.. woudnt that feel strange in your hand....

cturbos said:
54 views and no reply?
Click to expand...
Click to collapse
Because people want to see what "issue" you are talking about.

cturbos said:
hello
i'm looking for an app or mod to make the phone vibrate when the call is connected.tried call vibrate,but it does not work with nexus 4.
thank you
Click to expand...
Click to collapse
Don't no about a app but i think cm10.1 has that option , u MAY be able to extract phone app and get it to work on stock ROM .

I guess it will feel strange ! pretty awkward ! although extract the phone.apk from cm10.1 ! though !

Changing system apks on stock will affect your ability to accept and install new otas and will further cause problems doyen the road. Flash the rom. Stock rom is overrated and I don't know why people want to stay on it and they want the features of a custom rom.
Sent from my Nexus 4 using xda premium

My only issues with my Nexus 4 are...
1. No macro on camera.
2. No stabilization on camera.
3. There is a delay when starting a phone call where the other end can not hear you when you strt talking, using either T-mobile, Talkatone, Groove IP or Vonage.

the call vibrate is handy,better than having your phone glued to your ear.

Did you check the dialer settings? Open the dialer, Menu button > Settings and check Vibrate on Answer. Unless that's not available on stock (I'm using CM10.1)
And yes, this is actually very useful. Saves me the trouble of lifting the phone up to my ear only to hear a voicemail box.

rr5678 said:
Did you check the dialer settings? Open the dialer, Menu button > Settings and check Vibrate on Answer. Unless that's not available on stock (I'm using CM10.1)
And yes, this is actually very useful. Saves me the trouble of lifting the phone up to my ear only to hear a voicemail box.
Click to expand...
Click to collapse
It's not available on stock.
People still use Voicemail box? Just tie it to Google Voice's Voicemail. It transcribes your voicemail as well as allows a press play to hear. No more of that "press 1, press * to delete, etc"

On the 4.3 version, does this feature exist?

Flashlight Toggle and In app call recording.

Is there anyone working on this?
Or close to being done?
ForceRom has them on the to do list.
But im not sure on progress.
anyone have any updates?
Also I know some international roms have in app call recording toggle, is there anyway to port that for sprint? I dont see why it wouldnt work since it has nothing to do with the phone radio. Im guessing it the rom it will just be the secphone.apk? If someone confirms that ill give it a shot and report back.

I, too, really want the Call Recorder function but it seems like either no one on the Sprint side knows how to implement it or don't care enough about it. I know the Wanam rom for the i9505 has Call Recording enabled. You could flash that rom & get it. Just follow the tutorial for installing ROMs from other S4's to our S4.

optimummind said:
I, too, really want the Call Recorder function but it seems like either no one on the Sprint side knows how to implement it or don't care enough about it. I know the Wanam rom for the i9505 has Call Recording enabled. You could flash that rom & get it. Just follow the tutorial for installing ROMs from other S4's to our S4.
Click to expand...
Click to collapse
do you have a link to that to tutorial?

So I decided im going to try using thee Wanam Lite secphone.apk, and push it to Force Rom.
I am downloading Wanam right now, so when I get done ill report back and let yall know if it worked or not.
It will be super awesome if this works, because I know many sprint users would love to have call recording,
and this should be a pretty simple process.

com.sec.phone kept crashing over and over. and I had no signal.
shuld I get the com.sec.phone from wanam also?

Another Sprint S4 user had success & got Call Record working by flashing the entire Wanam ROM. The tutorial has been deleted, it seems. If I remember correctly, you're supposed to flash the Wanam ROM then flash a Sprint S4 kernel right after in the same session.
Perhaps create a nandroid first then try? If I remember that user's name, I'll let you know or maybe he'll chime in here.

optimummind said:
Another Sprint S4 user had success & got Call Record working by flashing the entire Wanam ROM. The tutorial has been deleted, it seems. If I remember correctly, you're supposed to flash the Wanam ROM then flash a Sprint S4 kernel right after in the same session.
Perhaps create a nandroid first then try? If I remember that user's name, I'll let you know or maybe he'll chime in here.
Click to expand...
Click to collapse
I dont mind flashing it, but the thing is i saw a thread talking about it and apparently people still couldnt get data after, even after they flashed the sprint kernel. Also read it needs to be a touchwiz kernel.

i flashed it, and its working great. everything works on it except for data.
so can anyone help me out with the apns?
and where do I enter the apn settings on the gs4?

chase357_501 said:
i flashed it, and its working great. everything works on it except for data.
so can anyone help me out with the apns?
and where do I enter the apn settings on the gs4?
Click to expand...
Click to collapse
Exactly

I posted this in another thread, not sure if it works. My guess is that you'd have to copy the settings from a Sprint ROM and then manually input them after flashing an I9505 ROM.
http://www.phonebuff.com/2012/07/configure-apn-settings-for-android/

You should be able to get to some if not all of those settings, by dialing ##3282##. You will need to enter your MSL number. There is a thread here in the Sprint forum, on how to get your MSL. I used, get my MSL from Gplay and it worked. Just follow the directions Once in, right down all of the settings and then put those settings in, once the different carrier's rom is installed. Good luck, and let us know the outcome

cerj said:
You should be able to get to some if not all of those settings, by dialing ##3282##. You will need to enter your MSL number. There is a thread here in the Sprint forum, on how to get your MSL. I used, get my MSL from Gplay and it worked. Just follow the directions Once in, right down all of the settings and then put those settings in, once the different carrier's rom is installed. Good luck, and let us know the outcome
Click to expand...
Click to collapse
1st of all, my main problem, was finding the apns in the wanam rom. I was able to find them in the sprint rom, because ##data# works. but when you go to the i9505 rom, that dial code does not work. I actually ended up getting access to the aps by using an app from gplay, called offline sim apn database. it has an option that opens up your apn list, and from there you can edit them, so I took all 4 of my sprint apn's, and entered them. there was 2 lte apn's and 2 ehrpd apn's. Well after high hopes, that was all I had. nothing happened. so there is definitely more than just entering apn's. I messed around with *#0011# for like 2 hours, trying to figure something out, but I got no results. so imo, we will just have to wait til something gets figured out. I personally am stuck for now,

chase357_501 said:
1st of all, my main problem, was finding the apns in the wanam rom. I was able to find them in the sprint rom, because ##data# works. but when you go to the i9505 rom, that dial code does not work. I actually ended up getting access to the aps by using an app from gplay, called offline sim apn database. it has an option that opens up your apn list, and from there you can edit them, so I took all 4 of my sprint apn's, and entered them. there was 2 lte apn's and 2 ehrpd apn's. Well after high hopes, that was all I had. nothing happened. so there is definitely more than just entering apn's. I messed around with *#0011# for like 2 hours, trying to figure something out, but I got no results. so imo, we will just have to wait til something gets figured out. I personally am stuck for now,
Click to expand...
Click to collapse
If you decide you really want to do it, check around XDA for Rom porting threads. There are a few easy to follow TUT's on this. They may just get you where you wanna be

Stock TW has a flashlight widget called "Assistive Light" that is built in and super quick.
Sent from my SPH-L720 using Tapatalk 2

For a flashlight toggle, I'm using "Mappz Quick Settings" from Play Store. It gives you AOSP-style Quick Settings tiles, including one for Torch, that you get by pulling down from the center of the top. If you pull down from the top left or top right you get the regular TW Quick Settings and Notifications.

The "Torch" moment's likely csn be interested into the Lockscreen and prolly added to the notification tray. I'm hoping to finish the toggle for turning on/off the am/pm & Time today. I'll look I to the Torch toggle this afternoon.
Sent from my SPH-L720 using Tapatalk 2

[Q] ATT S4 adds + to calls, making them fail

Hi everyone,
I've got an ATT I337 running the awesome Hyperdrive ROM version 17.1. Several of us --but clearly not all of us!-- over in that thread have noticed a problem with incoming calls. I think there's a setting somewhere that can fix it, so I'm opening it to a wider audience by posting it here, in hopes someone from this group will know what to tweak.
Here's the specific problem.
If my cell phone receives a call from a known contact "Bob" and Bob's contact info (being a U.S. phone number) is 317-555-1212, so far the phone seems to recognize the call as coming from Bob. However, it reports it as coming from +317-555-1212. When I go into the call log and try to return the call, it dials +317-555-1212, and the extra + causes the system to interpret it as an international call attempt, and the call fails. Cannot be completed as dialed, the message says. If it's an non-contact number, the + is still added. IT's not JUST for contacts.
Let's say Bob leaves a message. The voicemail indicator shows and it says offers to dial *86, the correct access code for voice mail for ATT as I understand it. However, tapping that actually dialed +11 then my ten digit phone number. Call fails.
At the dialpad, pressing and holding 1 to invoke voicemail has the same problem.
In Contacts, contacts are NOT listed with +s, and clicking the call button for them makes them dial OK without a + being prepended.
So, this looks like some international feature is being enabled that I'm not sure how to turn off. Does anyone have any idea how to turn this off? Sorta puts a crimp in the basic phone functionality. Seriously, who actually calls anyone these days? But it would be good to fix.
Please, if anyone has an idea of what might be at the root of this, I would appreciate your help!
Marc

I am confused. Does this only happen on the Hyper rom or all roms for you.
Not sure how anyone else does their contacts. But, I always enter numbers as 1-555-555-5555 even if local.
My voicemail number is set as +15555555555
I never had issues--
I remember some talk of that on Hyper awhile back. But, never paid attention--

Only happens on Hyperdrive. Or at least, I can say I never saw it on stock. Hyper is the only ROM I've actually gotten so far as to run while SIM card is inserted. :good:
My contacts are almost all US based and are just ten digits, no leading 1. I did try editing the contact to my work cell phone by adding a 1 to it, and calling my S4 phone. It still was registered as +317-555-1212 format and return call didn't work.
So, it's not really about the way the contacts are stored, more about how the phone interprets incoming calls.

Try the 1+ and see what happens. Just do a few of your most used numbers to start--
Can you put a different dialer on phone and see

rugmankc said:
Try the 1+ and see what happens. Just do a few of your most used numbers to start--
Can you put a different dialer on phone and see
Click to expand...
Click to collapse
Just edited above, adding 1 to the way contacts are stored doesn't change the behavior. I can certainly try a different dialer and see what happens, but it seems to be based on how incoming calls are interpreted. I'm guessing there's a build.prop item or somesuch that needs a-tweaking.
Marc

so you changed the contact number to 1-555-555-5555 with hyphens
i ran hyper for quite a bit awhile back never any issues. of course could be something new--
i am not thinking rom or a lot more would have issue--

I did some tests.
On the phone in question, I edited the google contact for a test phone number. I then called the phone from that tested phone number.
It didn't matter whether the contact was saved in the formats:
317-555-1212
1-317-555-1212
+1-317-555-1212
+317-555-1212
In all cases, the incoming call was recognized as +317-555-1212, which isn't a valid call-back number, and return calls failed. Since this only happened when I put a custom ROM on, I'm sure it's something buried inside the ROM. However, I'm at a loss as to where to check various settings.
Gotta be something deep in there...

If all else fails you can Odin back to stock, reformat your internal card and reroot.
Under Phone Settings/Additional Settings/My Phone Number--is it in format 15555555555
Also, and I don't know where to check, your country code may not be set. I don't know if we even have that setting anymore or would it be in Build Prop.
Probably under ro.something

rugmankc said:
If all else fails you can Odin back to stock, reformat your internal card and reroot.
Under Phone Settings/Additional Settings/My Phone Number--is it in format 15555555555
Also, and I don't know where to check, your country code may not be set. I don't know if we even have that setting anymore or would it be in Build Prop.
Probably under ro.something
Click to expand...
Click to collapse
Interesting thought. I had gone into the dialer settings, and checked the Current Country... it listed United States of America. Then I stopped. But looking further it turns out that in the Assisted Dialing settings just below that, there might be stuff that matters. Currently my assisted dialing is OFF. The settings inside are:
Country code: 1
IDD prefix: 011
NDD prefix 1
City/area code: 131
National number length: 11
The area code probably doesn't matter, but I'm interested in the national number length. Ours tend to be 10. Could you please see what your settings are in there, and let me know if anything is different?
I can always backup (ug, safestrap backup), return to stock, poke around, re-root/restore. But if you could take a quick peek I'd be grateful.
Thank you!
Marc
I tried an alternative dialer... it acted just like the stock with the + thing.

I am on a rom that doesn't have those settings--sorry

Thanks anyway! I experimented changing the last setting to 10, and enabling assisted dialing, and it didn't change anything. Sigh.

Ok, you can still go back to stock with Odin. Or, try one of iB's roms they are very good too, I use them almost exclusively now--
Good Luck--:good:

Yeah. I've been back to stock a couple times with Odin. I've got the process down pat! I prefer the hyperdrive rom if I can work through the few small warts. It's just such an elegantly crafted piece of work. Worth the effort, if I eventually sort out the call issue. Appreciate your help.
Sent from my SCH-I337 using Tapatalk

Frankenscript said:
Yeah. I've been back to stock a couple times with Odin. I've got the process down pat! I prefer the hyperdrive rom if I can work through the few small warts. It's just such an elegantly crafted piece of work. Worth the effort, if I eventually sort out the call issue. Appreciate your help.
Sent from my SCH-I337 using Tapatalk
Click to expand...
Click to collapse
i got the same problem too. We'll get it figured out!

Damani311 said:
i got the same problem too. We'll get it figured out!
Click to expand...
Click to collapse
I figured out the clock on status bar thing. Like someone else said it was under the alignment options ... hidden by default. One by one warts going away.
Sent from my SCH-I337 using Tapatalk

Have the same issue here ..can't dial vm..on hyper
Sent from my SCH-I545 using XDA Premium 4 mobile app

jshua said:
Have the same issue here ..can't dial vm..on hyper
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you haven't done so yet i suggest noting the issue in the hyper thread ... either the Verizon or att one depending on your phone. Seems to be a bunch of us... more folks report it the common thread will emerge.
Sent from my SCH-I337 using Tapatalk

Same issue here i can not dial voicemail and can not call a number back without typing the number in manually. Deal breaker for me hope it gets fixed soon so i can go back to Hyperdrive. Or somebody comes up with some sort of fix.

Download Prefixer and remove the + for outgoing call

BBG037 said:
Download Prefixer and remove the + for outgoing call
Click to expand...
Click to collapse
When I get back from vacation I will have to try this. Thanks!

Remove Wifi Nag from Rooted Device

I know you can remove the wifi nag with default.xml file, but don't know how on the HTC 10. Anyone know how to do this?

androiddude81 said:
I know you can remove the wifi nag with default.xml file, but don't know how on the HTC 10. Anyone know how to do this?
Click to expand...
Click to collapse
Same edits as previous vzw HTC devices, if you need the edits, let me know.

andybones said:
Same edits as previous vzw HTC devices, if you need the edits, let me know.
Click to expand...
Click to collapse
Thanks Andy, I'll just try the edits from the M8

androiddude81 said:
Thanks Andy, I'll just try the edits from the M8
Click to expand...
Click to collapse
heh,
happy to see that my 2 year old post is still relevant!

andybones said:
heh,
happy to see that my 2 year old post is still relevant!
Click to expand...
Click to collapse
haha. Only need to change "wlan_wifi_status" to 1 now. So still relevant :laugh:

androiddude81 said:
haha. Only need to change "wlan_wifi_status" to 1 now. So still relevant :laugh:
Click to expand...
Click to collapse
haha yea,
This MOD used to be such a PITA.

androiddude81 said:
haha. Only need to change "wlan_wifi_status" to 1 now. So still relevant :laugh:
Click to expand...
Click to collapse
When you made this edit did the Advanced Calling options go away in settings?
It's doing that on custom ROM oddly.
But you can still turn off Video Calling in call/settings, but can't get turn AC off completely unless you backtrack the MOD. Was a PITA tracking down what was taking AC away from settings menu and turns out to be this one single edit lol

andybones said:
When you made this edit did the Advanced Calling options go away in settings?
It's doing that on custom ROM oddly.
But you can still turn off Video Calling in call/settings, but can't get turn AC off completely unless you backtrack the MOD. Was a PITA tracking down what was taking AC away from settings menu and turns out to be this one single edit lol
Click to expand...
Click to collapse
AC = auto call? I can still turn it off and on without it crashing, but haven't tested if it actually disables if I uncheck it.
Flying home tonight. So I'll check then.

androiddude81 said:
AC = auto call? I can still turn it off and on without it crashing, but haven't tested if it actually disables if I uncheck it.
Flying home tonight. So I'll check then.
Click to expand...
Click to collapse
AC = Advanced Calling, sorry.
I think misunderstood my question.
So with customs ROMs I have ran into an issue where I lost the Advanced Calling and Tethering options in Settings menu (see attached screenshot). I finally after way too many hours, tracked the problem down to this one MOD (I had to find if it was from an app I was editing, then down to edits in the system, finally found it was in the customize folder and then in ACC/default.xml and even in there took forever as I had many changes). As soon as I make the edit and reboot they are gone, make edit back to stock and they show.
Everything still works fine - in regards to Advanced Calling, HD Calling and Wi-Fi Calling but those settings menu options just aren't there to turn on and off. I can get to an option to turn off Video Calling (see 2nd attached screenshot) which then leaves it into HD Calling state.
What I do as a workaround is keep a default.xml.bak with this MOD removed if I ever need to get into the options for w.e reason and they are only a reboot away.
Not the biggest problem, but very strange indeed. I made the same edit on M8, but M9 as well and never ran into this issue.
I was wondering if you had this issue as well after doing this MOD.

andybones said:
AC = Advanced Calling, sorry.
I think misunderstood my question.
So with customs ROMs I have ran into an issue where I lost the Advanced Calling and Tethering options in Settings menu (see attached screenshot). I finally after way too many hours, tracked the problem down to this one MOD (I had to find if it was from an app I was editing, then down to edits in the system, finally found it was in the customize folder and then in ACC/default.xml and even in there took forever as I had many changes). As soon as I make the edit and reboot they are gone, make edit back to stock and they show.
Everything still works fine - in regards to Advanced Calling, HD Calling and Wi-Fi Calling but those settings menu options just aren't there to turn on and off. I can get to an option to turn off Video Calling (see 2nd attached screenshot) which then leaves it into HD Calling state.
What I do as a workaround is keep a default.xml.bak with this MOD removed if I ever need to get into the options for w.e reason and they are only a reboot away.
Not the biggest problem, but very strange indeed. I made the same edit on M8, but M9 as well and never ran into this issue.
I was wondering if you had this issue as well after doing this MOD.
Click to expand...
Click to collapse
Yea, I still have the Call option in the settings. See attached.
Edit: my default.xml (nothing identifing in hear right?)
http://www.megafileupload.com/bxzD/default.xml

androiddude81 said:
Yea, I still have the Call option in the settings. See attached.
Edit: my default.xml (nothing identifing in hear right?)
http://www.megafileupload.com/bxzD/default.xml
Click to expand...
Click to collapse
My friend.
"Advanced Calling"
Not "Call"
See attachment

andybones said:
My friend.
"Advanced Calling"
Not "Call"
See attachment
Click to expand...
Click to collapse
Ahhh. No I don't have that anymore. I think I never noticed it before the change so I was really confused on what you were talking about.

androiddude81 said:
Ahhh. No I don't have that anymore. I think I never noticed it before the change so I was really confused on what you were talking about.
Click to expand...
Click to collapse
No problem my friend, I appreciate your feedback.
I couldn't figure out why it was missing and tracked it down to this one edit. Very weird. You should try setting it back to 2 value and reboot and see if Advanced Calling comes back.

andybones said:
No problem my friend, I appreciate your feedback.
I couldn't figure out why it was missing and tracked it down to this one edit. Very weird. You should try setting it back to 2 value and reboot and see if Advanced Calling comes back.
Click to expand...
Click to collapse
Hey, I did this today and the advanced calling menu option came back in settings, BUT nothing happens when I click on it. Just FYI.

andybones said:
My friend.
"Advanced Calling"
Not "Call"
See attachment
Click to expand...
Click to collapse
Thanks for the directions on this @andybones - Verizon's constant wifi notification nag drives me nuts.
Just applied this to @santod040's Nougat stock rom (https://forum.xda-developers.com/ve...m-1-85-605-9-aroma-root-root-debloat-t3529732) and it appears to continue to behave as you expect: lost the Advanced Calling and Wifi Tethering options out of the Settings menu. I can still get at the tethering via the sub-menu 'Mobile network sharing' as well as the quick settings pane so good to go. Too bad this even has to be a thing. #&$*#&$ Verizon

repentsinner said:
Thanks for the directions on this @andybones - Verizon's constant wifi notification nag drives me nuts.
Just applied this to @santod040's Nougat stock rom (https://forum.xda-developers.com/ve...m-1-85-605-9-aroma-root-root-debloat-t3529732) and it appears to continue to behave as you expect: lost the Advanced Calling and Wifi Tethering options out of the Settings menu. I can still get at the tethering via the sub-menu 'Mobile network sharing' as well as the quick settings pane so good to go. Too bad this even has to be a thing. #&$*#&$ Verizon
Click to expand...
Click to collapse
Very welcome. I know of another method to remove the WiFi Nag and still keep the Menus correctly in Settings. It's actually a method that we used on the M8 if I recall correctly. The current method posted here was what we used on the M9, and strangely had no affect to Settings Menu, even though the M9 also has Advanced Calling. I remember testing this method out a little bit ago on the 10, and all was fine. However to be sure, I am posting a .zip with the edited .apk and a .zip with stock, to go back to stock, and also if anyone wants to see what was done. Simple edits of removing 10 .png images.

andybones said:
Very welcome. I know of another method to remove the WiFi Nag and still keep the Menus correctly in Settings. It's actually a method that we used on the M8 if I recall correctly. The current method posted here was what we used on the M9, and strangely had no affect to Settings Menu, even though the M9 also has Advanced Calling. I remember testing this method out a little bit ago on the 10, and all was fine. However to be sure, I am posting a .zip with the edited .apk and a .zip with stock, to go back to stock, and also if anyone wants to see what was done. Simple edits of removing 10 .png images.
Click to expand...
Click to collapse
Coming through, as usual @andybones

andybones said:
Very welcome. I know of another method to remove the WiFi Nag and still keep the Menus correctly in Settings. It's actually a method that we used on the M8 if I recall correctly. The current method posted here was what we used on the M9, and strangely had no affect to Settings Menu, even though the M9 also has Advanced Calling. I remember testing this method out a little bit ago on the 10, and all was fine. However to be sure, I am posting a .zip with the edited .apk and a .zip with stock, to go back to stock, and also if anyone wants to see what was done. Simple edits of removing 10 .png images.
Click to expand...
Click to collapse
Thanks, will give this a shot next time I'm digging around in the guts of this thing. Much appreciated.