Database Users

Is it truly bricked?

Ok so here's the problem...
I was able to root my Rogers Dream but then I messed up with trying to partition the sd card. It was then that it would not go past the rogers screen. After A LOT of reading I downloaded what I thought would the files I need to simply restore the phone to factory. Long story short, if I just turn the phone on it sits at the Rogers screen, I no longer have recovery mode and my fast boot goes to a RGBW screen with Serial0.
Also on the FastBoot screen it states:
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.2.19.26I
I really just want to return the phone to the state it was before rooting it (store bought state). But because I can't access the fastboot through USB or even get to the Engineering SPL I'm really..really stuck!!
If I can get the proper FastBoot loaded somehow I think I can restore the rest.
Any help would be greatly appreciated.

no it is not bricked, try removing the sdcard

Still nothing.
Also if I press Home+Power or Camera+Power it still ends up at the same RGBW screen.

No, it isn't bricked
You are stuck at the stock SPL. I'm not sure about rogers but for tmobile you would want to put dreaimg.nbh on the root your SD card, load up the SPL. Flash dreaimg.nbh. Then it should boot into rc29 (I believe). Get root access, flash whatever flavor of recovery you want. Then boot into recovery and flash whatever SPL you want. Then you can get back into the SPL and restore whatever nandroid backup you had.
Again, this is what I would do on tmobile. Not sure about rogers, but I would assume since you would be loading your own backup everything will be peachy.

Ya I hear what you're saying. The problem is I can't seem to find an original Rogers DREAIMG.nbh file anywhere. I think I might be SOL and have to take into Rogers to get it fixed. I'm just not sure if I've voided the warranty or not.

I'm stuck at the exact same place - Rogers phone same, settings, screwed up somewhere along the way.
HTC told me (over the phone) that I can call Rogers and request service on my phone for them to flash it back to the original Rogers ROM because they're the carrier, but this would mean sending the device in..... Whether they'll do it or not, I do not know, but right now I'm trying to simply update to the engineering SPL and go from there. Stupid 0.95.0000 version is screwing everything up.
And I haven't been able to find any Rogers .NBH files ANYWHERE that would allow me to get back to factory settings. At this point, I'd be happy to know that I"m getting 3G and can install a custom ROM on my phone so that it'll at least work the way I want it to.

try here >>>>>> http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream/Magic32B_Firmware_to_CyanogenMod
dl the rc7 for europe and see if the fastboot recs it. if not try and find the system.img for rogers and ill tell you how to flash it via fastboot. if you had the system img it would already be good. no use of the nbh. also what is dif from dream and g1 besides apns and a small other few things?? if nothing then why not flash the g1 dreamimg?? once thats good then root and get it finalized? just wondering.
EDIT: I searched more for you. dont try my idea. im kinda dumb lol. i forgot that rogers and tmobile have dif boards. so this wont work and might brick you. so dont listen to me. sorry for missleading. im use to g1's in the usa sorry. ill keep searching for anything for you thou.
EDIT2: in fastboot can you >>>>> fastboot boot "name_of_your_recovery.img" ???
try that in fastboot to see if you can get into recovery. if you have no idea what i mean let me know so i can give some sdk instructions.

Unfortunately I can't because even though I can fastboot it won't allow me to connect to the laptop via usb. Basically the phone never gets to that point.

losingmyself said:
I'm stuck at the exact same place - Rogers phone same, settings, screwed up somewhere along the way.
HTC told me (over the phone) that I can call Rogers and request service on my phone for them to flash it back to the original Rogers ROM because they're the carrier, but this would mean sending the device in..... Whether they'll do it or not, I do not know, but right now I'm trying to simply update to the engineering SPL and go from there. Stupid 0.95.0000 version is screwing everything up.
And I haven't been able to find any Rogers .NBH files ANYWHERE that would allow me to get back to factory settings. At this point, I'd be happy to know that I"m getting 3G and can install a custom ROM on my phone so that it'll at least work the way I want it to.
Click to expand...
Click to collapse
I know! I can't believe out of every bit of information on how to root an Android phone there is basically nothing on how to fix it. At least for anyone using Rogers.

DO what I did, I had the same issue (T-mo) I used a micro Sd "converter" if you will...........and plugged it into my laptop's SD reader, copied the files over, and VIOLA!
I actually thought I bricked it 5 times.

TinBasher77 said:
Unfortunately I can't because even though I can fastboot it won't allow me to connect to the laptop via usb. Basically the phone never gets to that point.
Click to expand...
Click to collapse
I think you've misunderstood.. fastboot mode on the phone enables you to use the fastboot program on your pc to send commands. You can use it to boot a recovery image and flash the files you need to fix this. There's a sticky thread detailing how to set up and use fastboot in Q&A.

Does anyone...anyone at all know where I can get the official Rogers HTC dreaimg.nbh file? I have searched high and low and can't seem to find it anywhere. I'm pretty sure if I can get my hands on it I can fix the phone.
Thanks in advance.

TinBasher77 said:
Does anyone...anyone at all know where I can get the official Rogers HTC dreaimg.nbh file? I have searched high and low and can't seem to find it anywhere. I'm pretty sure if I can get my hands on it I can fix the phone.
Thanks in advance.
Click to expand...
Click to collapse
there is no rogers dreaimg.nbh

Hi,
How did you root your phone?
can you still boot into the recovery img? (home+power)
If you cant, try get back the recovery img (e.g. cm-recovery-1.4.img) and then home+power again. From there you should be able to update your spl to hardspl

Unfortunately I can't boot into fastboot any longer I just get the red/green/blue/white screen. This happens with both Home+Power or Camera+Power so I can't even use adb to force the images onto the phone.
Thanks for the help though.

Well problem solved (sort of).
I contacted Rogers and they're going to send me out a new phone and have me return the "defective" one.
Thanks for all your help and suggestions.

Need help about root Fender mytouch

i have a black fender mytouch 3g and i tried to root, i have created the goldcard but im stuck at the SAPPIMG.zip won't flash, i dont know why it never ask me to update, HBOOT did detect and uploading SAPPIMG.zip..but when HBOOT checking the image, suddenly it just go back to HBOOT Screen, no dialog asking me to flash..and there no message at all..
Plz Help me been 2 day doing root mytouch fender but no results at all

http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
Next time, search the forums. This subject has been brought up numerous times. The search function is your friend. Also "google" is a great tool also.

i did exactly same step on unlocker but it still checking sappimg then back to hboot screen never ask for update

You have to leave the goldcard.img on the root of the SD card.

i have tried but also not work

There are a few things that are sketchy with the 1.2 devices and rooting that the unlockr doesnt explain well. I just got around to rooting on 3 days ago and I'll list what I encountered and how i worked around it.
Certain sd cards don't work even if made right. The 8gb that came with the phone worked for me.. When you format the sd card it HAS to be in either and sd adapter or you MyTouch. you can't do it in another phone because it formats it with a certain encoding that makes it not recognized as compatible for a goldcard.
When you get the CID via adb shell it doesnt produce a prefect goldcard.img 100% I had to plug my phone into another usb port and redo the CID processes to get on that worked.
Make sure when you make changes to the SD card in the editor you use the PYSHICAL and NOT LOGICAL when you select which drive to edit (my biggest problem >_<)
If the SAPPIMG file you download is .zip it needs to change to .img and if it comes as .img change it to .zip
that's all i can suggest.. I read the directions... like 20 times and it took me 4 hours before i figured out all the little mistakes that kept it from working.

i dont get that you plus it in other port to get CID and not gonna give you a different CID and how to know that goldcard.img is working 100% thanks

well first of all I know you did this wrong. I know you did this wrong because you have a file called SAPPIMG.zip, you should NOT have this file.
You are supposed to download Amon's perfect SPL and change that to a file called SAPPIMG.img
It is tough to say what else may be a problem until you do that correctly, you are lucky you did not brick your phone.
read carefully:
http://forum.xda-developers.com/showthread.php?t=622530

Bricked mytouch 3g possibly!!

So i hope this is the right place to ask. I updated the radio to 6.xx and the spl to 1.33.0013 and now i cant boot my custom rom or access the recovery screen, but i can access fastboot. Ive tryed flashing a new radio, recovery etc from the sdk cmd promt and no luck, keeps saying remote: not allow. IS there anything i can do from the fastboot to get my phone back. Sorry if this is realy noobish. Ive searched for 3 days and i've had no luck. PLEASE HELP ME
Sapphire pvt 32a sip s-on g
hboot-1.33.0013 (sapp31000)
CPLD-13
Radio-6.35.10.18
oct 21 2009,22:33:27

You are ok untill now..You have not bricked your phone....you can still recover it using fast boot or recovery...
serach for the correct topic on this fourm...you will surely get info

Ive tryed everything in fastboot and i cant get into recovery. If i could i would have fixed it by now

Tried Goldcard method as well?

I cant do a goldcard again. I cant access the operating system. I cant access the recovery screen. Al i can do is access fastboot. And from there i just get remote: not allow when i try to modify things. I just need a BIG reset button on this phone. Im hitting my head so hard against the wall trying to figure this out. I try to read up but everywhere you go its something different and its all soooooooo confusing. No one makes nay sense

If this is a bad place to ask this, please tell me. My head hurts and im very frustrated because i followed someones write up step by step and i got screwed over. I know it can be fixed!

OK dude, just breathe. By looking at your SPL you've got the myTouch 1.2 (the one with the 3.5mm jack) so you've got o use the goldcard method which is done through hboot and fastboot, if you can get one you can get the other. Let me get to a computer and we'll fix your problem. In the mean time post back and let me know your still here.
Sent from my HTC Magic using XDA App

You need to fastboot an engineering spl first.
I believe 1.33.2010 should do it.

Flash back to the operator's ROM and start all over again; safest approach if you are having a difficult time understanding how to troublshoot your problem.

I try to load a new sippimg.img ( from my understanding that a new spl) And everytime i load it, it says model id wrong and fails to load.
And in fast boot i cant load anything new cause i get the remote: not allow.
How am i suppose to create a gold card another gold card without having access to the phones main operating system?

I just went to http://forum.xda-developers.com/showthread.php?t=529019 and followed that and wasnt able to load the recovery image cause because remote: not allow. So im stuck

Try using this.
Sent from my HTC Magic using XDA App

I cant create a new gold card, i cant access the phone I created one before but it still gives me a the wrong mode ID code. And i cant do adb because i cant turn on USB debugging since i cant access the phone.
I followed the steps in the link. I loaded the sappimg.img and it loaded it but didnt ask to confirm the install, but it did show a loading bar and when it was completed it never said anything about restarting or anything. It just detected it, loaded it and then nothing. So after that i tryed to load the spl, radio and recovery and it still gave me remote: not allow.
It seems my gold card somehow undid its self. I need to figure out how to make one without being able to access the actual phone options. I realy do appreciate you guys helping!!!! If this gets fixed ill kiss all of you. JK!

How long have you had your phone?

3 days But i didnt buy through t-mobile, so no warranty for me

The only other option I can think of is to see if a friend with the same phone can let you borrow his. Luckily the stuff you need to do isn't phone specific, it's only specific to the SD card, so you can remake it with another phone and then use it to finish your's.
I believe the CID that you get (that ridiculously long number you have to copy) is specific to the SD card. I just swapped the goldcard I made for my phone into my wife's and the CID remained the same. Just not sure if using a different model phone will work.
You don't happen to have the CID still do you?

DonJuan692006 said:
The only other option I can think of is to see if a friend with the same phone can let you borrow his. Luckily the stuff you need to do isn't phone specific, it's only specific to the SD card, so you can remake it with another phone and then use it to finish your's.
I believe the CID that you get (that ridiculously long number you have to copy) is specific to the SD card. I just swapped the goldcard I made for my phone into my wife's and the CID remained the same. Just not sure if using a different model phone will work.
You don't happen to have the CID still do you?
Click to expand...
Click to collapse
I still have all the emails for when i originally made a gold card and the goldcard.img.

You can try doing the steps in Hex Editor, where you copy the lines from the goldcard image over to your SD card again. Then try flashing the sappimg again and see what you get.

On it! :cross fingers:

I did all the Hex editor stuff. And i still get Wong model ID when i try to install a new sappimg.img. I tried several times and double checked the hex editor.

Bricked?! Halp!

I've got a 32A mt3g 1.2.
PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
I can get into fastboot. but have no recovery. and CM6.1 just sits at the CM screen forever, but I have adb access at that screen.

MotoMudder77 said:
I've got a 32A mt3g 1.2.
PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
I can get into fastboot. but have no recovery. and CM6.1 just sits at the CM screen forever, but I have adb access at that screen.
Click to expand...
Click to collapse
First of all, wrong section. Moving to General. Next time your post will be trashed.
Secondly, your not bricked. Please check your definitions.
Third, try flashing the engineering bootloader via goldcard method and then fastboot flash recovery recovery.img (Amon_RaG or ClockworkMod for MyTouch/Ion).
Then power off your phone and hold the home button while powering it back on.
You should now have a recovery. From there try flashing the rom again. If it still doesn't appear to be doing anything then do a wipe and reflash.

Thanks for the tips, ill go for that right now.
sorry for the wrong section. Im wouldve put it in the Q&A section if there was one.
EDIT:
The only guide for a goldcard I've found requires a working phone. Mine doesnt work.

MotoMudder77 said:
Thanks for the tips, ill go for that right now.
sorry for the wrong section. Im wouldve put it in the Q&A section if there was one.
Click to expand...
Click to collapse
Seriously?
myTouch 3G, Magic General
Discussion about the T-Mobile myTouch 3G, HTC Magic (general Q&A, tips & tricks)

Ok Im blind, sorry.
But still have a bricked phone. and if the MT3g section is anything like the HD2 section. the only place to get answers is the DEV section.

Your going to have to find someone with an Android phone (any Android phone will work) to create the goldcard.

No need. If you got adb access you can flash the custom recovery from there (cm 6.1 has the SU and flash_image binaries).
Then simply load the custom recovery and fix your rom/OS (flash a new one or wipe or what ever).
Take a look at my guide (check my signature) and you will find all the steps needed. Just make sure you use G recovery and NOT H.
Good luck hunting!

To add to that, what radio are you using? You only gave us your hboot.
Sent from my HTC Magic using Tapatalk

MotoMudder77 said:
...
The only guide for a goldcard I've found requires a working phone. Mine doesnt work.
Click to expand...
Click to collapse
If you put the goldcard in and boot to your bootloader and press the back key it will load your goldcard and flash the engineering spl.
mumilover said:
No need. If you got adb access you can flash the custom recovery from there (cm 6.1 has the SU and flash_image binaries).
Then simply load the custom recovery and fix your rom/OS (flash a new one or wipe or what ever).
Take a look at my guide (check my signature) and you will find all the steps needed. Just make sure you use G recovery and NOT H.
Good luck hunting!
Click to expand...
Click to collapse
He stated that the rom won't load and he can't load the recovery. His spl is S-ON so from where I sit the goldcard method is his ONLY choice.
If that doesn't work then he's pretty much SOL.

Binary100100 said:
He stated that the rom won't load and he can't load the recovery. His spl is S-ON so from where I sit the goldcard method is his ONLY choice
Click to expand...
Click to collapse
MotoMudder77 said:
I can get into fastboot. but have no recovery. and CM6.1 just sits at the CM screen forever, but I have adb access at that screen.
Click to expand...
Click to collapse
Well, i disagree :0)
Look above.
My method should work with no problems... it will actually take less then 2 min ( 70 sec if done by me... YES i timed it ;0) OR 10 sec if using a script!)
DonJuan692006 said:
To add to that, what radio are you using? You only gave us your hboot
Click to expand...
Click to collapse
Good point :0)
If you have a ****ed spl/radio combo, then all this is for nothing and there are other issues to be fixed first!

Its kinda a difficult situation. I only have adb access for a little while while @ the Cm screen, then it goes away, and Im stuck at the CM screen. I have attemped the goldcard a couple times, but I dont have the correct card, and none of mine seem to work. Wife was shopping, and could only find SanDisk cards, and it didnt work.
Radio is 2.22.23.02
Im gonna attempt anything and everything I can think of to get it to work, but I might have to just run into town and find a damn Kingston card.

SanDisk cards work, got mine sitting in a box in my closet from where I rooted my phone. It may be a procedure that's wrong, not the SD card.

Ok well I managed to get the goldcard made, but when I get into HBOOT, it scans the card and states: no image or wrong image for the sappimg.zip.
file is @ the root of my sdcard, and wont read it, yet when I dont have the goldcard setup, it reads the file just fine. same exact file.

MotoMudder77 said:
Ok well I managed to get the goldcard made, but when I get into HBOOT, it scans the card and states: no image or wrong image for the sappimg.zip.
file is @ the root of my sdcard, and wont read it, yet when I dont have the goldcard setup, it reads the file just fine. same exact file.
Click to expand...
Click to collapse
make sure it's not sappimg.zip.zip

Binary100100 said:
make sure it's not sappimg.zip.zip
Click to expand...
Click to collapse
Its not. I've managed to get 2 goldcards succefully made, verified that multiple times, but it just doesnt work. It will not read the file from the SDcard.
I can put the same file on my sdcard from my HD2 and it will read it no problem.
I might play around with it more, but for now, Im calling it a brick.

Just to make sure, have you tried downloading the sappimg file again?

DonJuan692006 said:
Just to make sure, have you tried downloading the sappimg file again?
Click to expand...
Click to collapse
Yea, I've got 3 or 4 different ones on my PC, tried all, none work. It reads the sdcard and just passes it by.
Im really stumped. Followed the goldcard method to a "T" with 4 cards, 2 actually succeed in the proccess, but niether will get the sappimg.zip to read.
After installing the card into the phone and, attempting the Hboot, the HEX gets changed on the card also, just a few values, nothing exteme
IDK if thats normal or what, but it happens.

I don't think it should change anything so that may be your problem. I'm pretty sure I looked at mine after using it and it was the same. Weird.

well last resort, gonna turn my 8gb class 6 sdcard for my HD2 into a goldcard, and check.
after putting the sappimg on the sdcard w/o formating, goldcard or anything, the MT reads the sappimg, and attempts, but gets the error, of course. So im attempting the goldcard right now.
UPDATE:
It worked, got eng SPL on the phone, figured I would just follow CM guide for rooting to verify that it will work. but Im stuck:
# Once it finishes flashing, it should ask you to reboot. Reboot and let it load to the new "htc Magic" boot screen.
# Chances are at this point that the phone will not successfully boot. THIS IS NORMAL. Simply remove and re-insert the battery, as we're not done yet!
# Download the following zip file (the stock myTouch SPL and Radio) and extract it: [1]
# Copy the two files inside the zip to the root of your SD Card
# Take the latest Amon_RA recovery you downloaded earlier and copy it to the root of your SD Card.
# Download terminal emulator from the market and run the following commands:
flash_image flash radio /sdcard/radio.img
flash_image flash hboot /sdcard/hboot_7201A_1.33.0013G_091021.nb0
flash_image flash recovery /sdcard/recovery-RA-sapphire-v1.7.0G-cyan.img
Click to expand...
Click to collapse
Items in red are the issue, if the phone doesnt boot, how am I supposed to get into market?

Done and Done! phone is working again. I guess I should've tried my nice sdcard a while ago, but I didnt want to screw it up.
Oh well. Thanks for all the tips and ideas guys!

oh the insanity

cant believe im posting this but here it goes.
couple days ago i had a working phone(mytouch 3g us) running on yoshi rom. now i cant even get into recovery. pwr+home. but able to fastboot.
I had sapphire PVT 32B ship s-on g
HBOOT- 1.33.0013d (sapp30000)
cpld-10
radio 2.22.27.08
oct 21 2009
so i was able to get S-OFF and install eng rom 2005
Now **** hit the fan. Since i couldn't get into recovery i was able to use fastboot commander. tried to fix what i did and now this is what i have 3 days later of trying to get it back to normal. Failure sums it up!!
sapphire PVT 32A ship s-on g
HBOOT- 1.33.0013d (sapp30000)
cpld-10
radio- 6.35.16.19
oct 21 2009
I get into fast boot and i cant even update anything. i try and it says check signature failed. What ever nbh file i put on the phone it gets stuck on updating radio, bar is almost filled to the top but sits there forever, till batter dies.
Any help would be great thanks in advance

Omg. Why did you flash inappropriate radio? Only magics 32a are compatible with 6.35.xx.xx
You can try flash ruu 2.53.707.2 from my library: http://forum.xda-developers.com/showthread.php?p=6109097 (requires goldcard)
It has eng hboot and you will able to restore 32b combo next step, but chances are so small...
P.s. If you will have success with 2.53.707.2, then I will write next step. Do not do fast actions.
Sent from my A7-040 using Tapatalk

This issue has been answered multiple times, and I personally have spent many hours solving and documenting the issue.
Do a search and you will conquer :0)

hey i tried that ruu it gave me wrong id for the phone..
since i have the tmobile i tried 54) 3.12.531.1 T-Mobile USA FRG83D
and been waiting for the radio to update been its updating at 55%
what other ruu can i try?
Mum i tried a search any hints as to what ot search for specifically via your user name
thanks

mumilover said:
This issue has been answered multiple times, and I personally have spent many hours solving and documenting the issue.
Do a search and you will conquer :0)
Click to expand...
Click to collapse
i found some of your posts i cannot adb at all only fast boot. i installed the adb drivers and could never get adb devices to list anything. only fastboot devices worked.
i even tried the above ruu posted and now im stuck in ruu

what is on your screen now? ruu mode?

kayelzhl said:
what is on your screen now? ruu mode?
Click to expand...
Click to collapse
yess can you say paper weight!?!! haaha

check your pm

Has this story success?

5[Strogino] said:
Has this story success?
Click to expand...
Click to collapse
no. unable to create gold card and still stuck in ruu. guess the phone is a gonner

tlipur said:
no. unable to create gold card
Click to expand...
Click to collapse
You can create goldcard with any HTC phone. Ask friends, neighbors. This operation is safe. You need insert your own sdcard to friend's phone, read cid, generate goldcard image and paste it onto your sdcard.

5[Strogino] said:
You can create goldcard with any HTC phone. Ask friends, neighbors. This operation is safe. You need insert your own sdcard to friend's phone, read cid, generate goldcard image and paste it onto your sdcard.
Click to expand...
Click to collapse
What really was not aware thought it would have to be done by the same make model phone.
Ok ill try to make a gold card have a droid incredible that i can use.
After i make the gold card what would i need to do next? Im still stuck in ruu with a chip at the bottem with a circle and line going through it.
Thanks

tlipur said:
What really was not aware thought it would have to be done by the same make model phone.
Ok ill try to make a gold card have a droid incredible that i can use.
After i make the gold card what would i need to do next? Im still stuck in ruu with a chip at the bottem with a circle and line going through it.
Thanks
Click to expand...
Click to collapse
make a gold card, use the guide one the page "htcdev",(i cant post address) it will kick your phone out of RUU, if you are lucky enough to have a custom recovery before you got into this problem, then you can bring your phone back to life. btw, i have a magic 32A and stucked in the ruu before.

kayelzhl said:
make a gold card, use the guide one the page "htcdev",(i cant post address) it will kick your phone out of RUU, if you are lucky enough to have a custom recovery before you got into this problem, then you can bring your phone back to life. btw, i have a magic 32A and stucked in the ruu before.
Click to expand...
Click to collapse
Whenyou say guide is it for making the gold card or to get out of ruu? If its a guide for the gold card I'm going to use the one posted on addictive tips. Gold card made what's the next step?
How long did it take you to get it out of ruu ?

Mmm... http://forum.xda-developers.com/showpost.php?p=23599950&postcount=2

tlipur said:
Whenyou say guide is it for making the gold card or to get out of ruu? If its a guide for the gold card I'm going to use the one posted on addictive tips. Gold card made what's the next step?
How long did it take you to get it out of ruu ?
Click to expand...
Click to collapse
no, gold card is easy to make when you have an android device, the guide i mean is how to kick your phone out of ruu, which may need a gold card. so before you do the guide on htcdev, make the gold card first. since i cant post address here, i will pm it to you about the guide.

5[Strogino] said:
Mmm... http://forum.xda-developers.com/showpost.php?p=23599950&postcount=2
Click to expand...
Click to collapse
heya i tried running the ruu and it not able to find my phone. im able to fastboot devices and get it listed. i tried running it before the first time and i think it picked it up. i ran the tmobile one just to see if it picks it up and it did.
im going to try another pc real quick; Ok tried the other pc same result, t mobile ruu picked it up.
Went back to 1st pc uninstalled all driver programs related to phone. cleaned out registry and temp.
Checked with USBDeview, non listed. installed drivers that are from sdk tools, android bootloader interface.
ran it again still dident pick it up but tmoible ruu again picked it up.

So its. Gonner then eh?

0. Go into fastboot mode
1. Check connection by command
Code:
fastboot devices
It should return serial number
2. Run RUU 2.53.707.2
3. Navigate to windows temporary directory and search for rom.zip
4. Check twice that is 2.53.707.2 archive (you can unpack files and view hboot via notepad, you will see something like 1.33.2010 ENG S-OFF)
5. Copy rom.zip into folder with fastboot.exe (from Android SDK Tools), close RUU
6. Run
Code:
fastboot flash zip rom.zip

Just gave it a shot it passed sig, header,info then stopped at checking model id
Remote 41 model id check fail.
I used gold card tool 0.0.5 to get cid then went to rev skils dl the image and used the same prog to create the gold card via patch mmc.