Related
I am a noob to all this cooked ROM stuff. I purchased my USA T-mobile HTC HD2 last week....i have spend countless hrs trying new rom's and android builds. I still can not get internet explorer or opera to open at all in WM 6.5 or Android when i dual boot. Here is what I have loaded right now:
Chucky Droid ROM-TMOUS version
& schubCRAFT_v1.4d
I have also updated my stock radio to Radio_2_12_50_02_2
I also have only the pre installed SD card that came with the HTC HD2
also I'm with T-mobile in the US in south FL....
i just want to be able to use both windows mobile and android, like i read other are doing . I like being able to use win mobile for syncing and i want android for the apps =). please help help this noob to be able to run and test out multiple builds . Because i cannot even get one build to work =(. I'm going to bed now its 1:28AM my time. But i will be up and checking this post as soon as I wake up =)
Again, thank you for your time and knowledge.
P.S. I'm very sorry if this is the wrong place to post this. I will re-post if needed to the correct area if this is not it.
I don't know why winmo wont load, but 1.4d has some ppp bugs in it. Try 1.4c from HERE and you'll have shubCRAFT working til its fixed.
okay will give it a try . i'll post and let you guys know how it turned out
ok well i just put the FroyoStone with HTC Sense V2 - Release Date: 02.Sep.2010 on my HD2 and it works just fine but i do have a problem with making calls like it freezes and crashes the caller app. its not a problem with the radio i dont think so but does anyone can help me with this? i used the searched but could not find anything but problems with radios. so i would greatly appreciated
daniel18616 said:
ok well i just put the FroyoStone with HTC Sense V2 - Release Date: 02.Sep.2010 on my HD2 and it works just fine but i do have a problem with making calls like it freezes and crashes the caller app. its not a problem with the radio i dont think so but does anyone can help me with this? i used the searched but could not find anything but problems with radios. so i would greatly appreciated
Click to expand...
Click to collapse
What radio are you using and did you run CLRCAD.exe?
Radio versions are responsible for almost every problem running android on HD2. You should really upgrade to version 2.12 and compare. Also try upgrading your winmo rom to one of the other winmo rom's on the this site, since they tweak and change minor things which may have an impact. I use ChuckyROM, which is nice because it has a cool loader for launching android with the click of a button.
What are some reliable radios yall recommend to use and I have a cooked winmo Rom already but I can do everything on the Android but make a call I can receive text emails and surf but can't make calls :/
Like the above poster already suggested, use 2.12. This is the newest radio. It works great for me.
I am using radio 2.15.50.14 and cannot get android to run
I run HARET and it shows a couple of lines of code, then within 3 or 4 seconds of running it, I get lots of static horizontal white lines and the device basically bricks and I have to remove the battery.
Any ideas?
markish99 said:
I run HARET and it shows a couple of lines of code, then within 3 or 4 seconds of running it, I get lots of static horizontal white lines and the device basically bricks and I have to remove the battery.
Any ideas?
Click to expand...
Click to collapse
I had this same problem when I first started reading about droid on HD2.
Make sure you flash your phone with HSPL and make sure you format your memory card as FAT32.
problem calling, american suffix added
hi,
i have recently upgraded my hd2 with the latest winmo (oct 2010) and install Android 2.2 with sense. that works fine, but i have sometimes a problem when i'm trying to make call, the phone add automatically the usa suffix to my number :s
example if i try to call a 06xxxxxxxxhe will try to call the 00106xxxxxxxx.
can someone please help me to resolve that.
thank you very much.
hi,
i have succesfully boot android to my hd2, but when i turn my phone off and turn it on it starts with my standard rom (winmo 6.5)
can somebody help me?
thanks!
Maybe you didn't you understand that its the way it should be ?
You have installed a SD build, which means your WM 6.5 ROM has not been touched in any way, and everytime you reboot then your phone will boot in WM first.
By the way, this is a great advantage of SD builds, because if anything goes wrong in Android, you can quickly go back to WM.
Fortunately, you can automate the work to restart Android at each boot by installing an app like EBL (Exceller boot loader). Search here on xda, or google it for more information.
Ok thanks for the reaction,
I have one problem. When i turn on the music on my phone, it's going faster than normal. I have read some things, but it stil there.
My radio version is now: 2.10.50.26
hi plz help
hi
I have a problem when i tried to run android on sd card the problem in the voice of the call whatever the win rom is or the radio i still have the same machine like voice on the call sooooooo plz plz can any on help me
hi
i have htc hd2 windows mobile im convert it to android 2.3.2 but i have some problem with dealer and it frozen when im make call and say forced close pls help me soon thnks alot.
@castro2020
More details please (NAND or SD, kernel, radio version…). Some apps like Viber or Shazam can cause this issue after using them.
NEED HELP I HAVE FROYO V3 WORKING FINE ON MY PHONE BUT I WANT THE EVO BUILD INSTEAD !JUST LIKE IT BETTER I COPYED THE FILES STR8 2 MY storage card N IT BOOTS UP EVERYTHING just fine ! ItZ FAST N WORKS FINE BUT IT KEEPS SAYIN I HAVE NO INTERNET CONNECTION ! cant connect to anything at all
BUT WHEN I BOOT FROYO V3 EVERYTHING WORKS FINE 3G INTERNET ! BUT I LIKE THE WAY THE EVO BUILDS LOOK pWITH SENSE !
PLEASE HELP ME
ROM- CHUCKY ROM WWE
RADIO-2.12.50.02.2
HARDSPL i think 2.08
I'd love to help you out, but the way you type just hurts my eyes. Also, a little searching in the thread of your build has 99% chance of solving your problem.
If you can rewrite your post in English, I may be able to help.
Sent from my HTC HD2 using XDA App
people i've got a couple questions,maybe some1 allready has asked it for that i am sorry,got myself an htc hd2 with android 2.3.1 gingerbread stuck with a few problems.
When i am calling, i can hear the phone go over with some kind of a noise in the ear speaker and when the other party awnsers there voice is....also some kind of an snowy noise, when people call me(the same or other people)i can hear then like they stand beside me(vodafone.nl is my profider).
A lot of times the screen says - the process android.process has end please try again - when it is media or camera or something else, it sometimes shows.
When i install igo 8.4.2.139242 jmx, it install's , but when i try to start it , it says install igo folders on sd card any suggestions.
And last but not least, cant sync the htc android 2.3.1 to my pc windows 7, some1 told me about sdk drivers and something else that he didn't knew what that had to be.
Sorry for my bad english writting and for the questions i hope some1 could help me with some links greetz mike (thnx in advance)
mad-monk said:
people i've got a couple questions,maybe some1 allready has asked it for that i am sorry,got myself an htc hd2 with android 2.3.1 gingerbread stuck with a few problems.
When i am calling, i can hear the phone go over with some kind of a noise in the ear speaker and when the other party awnsers there voice is....also some kind of an snowy noise, when people call me(the same or other people)i can hear then like they stand beside me(vodafone.nl is my profider).
A lot of times the screen says - the process android.process has end please try again - when it is media or camera or something else, it sometimes shows.
When i install igo 8.4.2.139242 jmx, it install's , but when i try to start it , it says install igo folders on sd card any suggestions.
And last but not least, cant sync the htc android 2.3.1 to my pc windows 7, some1 told me about sdk drivers and something else that he didn't knew what that had to be.
Sorry for my bad english writting and for the questions i hope some1 could help me with some links greetz mike (thnx in advance)
Click to expand...
Click to collapse
May be its a problem in build you are using. Try different gingerbread build. [22 JAN] -=MDJ's CyanogenMod 7 v. 2.6 [A2SD+][GRH78C][RMNET][Kernel: MDJ S10.4 OC] is really good one. Also see if someone else had the same problem in the thread for that build...
try updating your radio if you haven't done so already.
is there an easy way to install an other 2.3 build's like put them on a sd card and run it, and maybe also an other build of radio that is easy to install...(sorry but i am just a plumber) please i am going crazy of those site where i have to register and so on , pm me for e-mail the build's of it is posible greetz mike
mad-monk said:
is there an easy way to install an other 2.3 build's like put them on a sd card and run it, and maybe also an other build of radio that is easy to install...(sorry but i am just a plumber) please i am going crazy of those site where i have to register and so on , pm me for e-mail the build's of it is posible greetz mike
Click to expand...
Click to collapse
Use CWM. If you don't what that is, try reading the stickies and scan through the pages. For the radio, you need to enter bootloader to flash.
Register in other sites? You only need to register here in xda and that's it.
Reading and patience are the keys.
Sent from my HD2 Droid HD using XDA App
install Clockworkmod trought romupdateutility.exe or DAF .. and i would recommend you to install this rom
http://forum.xda-developers.com/showthread.php?t=933951
im using it now .. no problems with it
i am currently using Android-versie 2.3.1 Smalbandversie 15.34.50.07u_2.08.50.05 Kernel-versie [email protected]#26 Cpu info ARMv7 Processor rev 2(v7l) Mem info (avail/total) 192mb/411mb Mod version Mdj's CyanogeMod 7(v.2.4)a2SD+ Build-nummer GRH78
Is it posible to just install this one http://forum.xda-developers.com/showthread.php?t=933951 over my own , or is posible to downgrade to android 2.2 (for a more stable phone)
Need Help to NAND Flash
I have HTC HD2
with a
OS Version 502.21913 (21913.5.0.94)
Manila Version 2.5.2.20181527.0
ROM Version 3.14.707.3 (04666)WWE
ROM Date 11/10/10
Radio Version 2.15.50.14
Protocol Version
15.42.50.114
What i want to know is my phone compatible with Android 2.3? Because i want to use Android as my main OS.
I dont have experience flashing NAND Rom. Previously i use Android from my 8GB SD Card. Guide from all of you is really appreaciated Thank You
Every hd2 is compatible as long as you have the right radio and hardspl, you have the latest radio so you're good there, do you have hardspl? If you do, you need MGLDR 1.3 and a nand rom.
chanhensem said:
I have HTC HD2
with a
OS Version 502.21913 (21913.5.0.94)
Manila Version 2.5.2.20181527.0
ROM Version 3.14.707.3 (04666)WWE
ROM Date 11/10/10
Radio Version 2.15.50.14
Protocol Version
15.42.50.114
What i want to know is my phone compatible with Android 2.3? Because i want to use Android as my main OS.
I dont have experience flashing NAND Rom. Previously i use Android from my 8GB SD Card. Guide from all of you is really appreaciated Thank You
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
My current SPL is 3.03.0000
I made some reading says that i have to downgrade my radio to 1.66 to obtain SPL 1.42?Is it?
Ive tried pongsters hyperdroid v12 build awesomely fast but I cnt send or recived any mms messages. so I switched to his CM7 v.2.1.0 gingerbread 2.3.4 no problems rightnow. the way he post his build is noob proof, easy to follow like a noob like me, now i wana try new builds is there a better build than pongsters cw7 2.3.4? any suggestions thank you
yes 52911 is out...enjoy
Plz help me
i have android 2.3.1 MDJ Gingerbread v1.0 RC5
when i connect my ph. with USB it just charge but does not show any Icon on the left top corner of notification bar...
and so i can turn my ph to mass storage through USB
any Idea??
coolbuddy1321 said:
i have android 2.3.1 MDJ Gingerbread v1.0 RC5
when i connect my ph. with USB it just charge but does not show any Icon on the left top corner of notification bar...
and so i can turn my ph to mass storage through USB
any Idea??
Click to expand...
Click to collapse
i found the solution ...
install Multi mount SD frm market
and now i have problem in market...
sever Error...
to download any app i have to fast else it shows server error..
fast means click on app >>free>> ok it shows item downloading .. if sometime im slow it show server error... what to do
---------- Post added at 11:07 AM ---------- Previous post was at 10:56 AM ----------
coolbuddy1321 said:
i have android 2.3.1 MDJ Gingerbread v1.0 RC5
when i connect my ph. with USB it just charge but does not show any Icon on the left top corner of notification bar...
and so i can turn my ph to mass storage through USB
any Idea??
Click to expand...
Click to collapse
i found the solution ...
install Multi mount SD frm market
and now i have problem in market...
sever Error...
to download any app i have to fast else it shows server error..
fast means click on app >>free>> ok it shows item downloading .. if sometime im slow it show server error... what to do
hi guys
pls help me out. i m a new t mobile hd user. have the stock rom. used one week without problem. then phone started to repeatedly get stuck. initially when phone is switched on, the screen wont come on for 15 minutes. but the hard buttons were flashing. this would spontaneously recover. later phone started to get stuck while being used and in standby mode. i thought it could be due to cookie home tab and other software recently installed. so uninstalled all of that, but, no result.
then i accidentally switched to "swype" (i was using the htc keyboard). then it really became mad! needed to soft reset repeatedly. the moment i try to type something ( swype mode is still on. cant switch back to the usual kb, it gets stuck) phone gets stuck, needing soft reset. finallly went for hard reset.
1. is this a known issue with hd2? (somebody told me so)
2. how can i overcome this? would a cooke rom like the energy rom help?
3. whats wrong with swype ????
please, anything to help guys....
Yes if you install a custom ROM especially a Energy ROM you can kiss all that bad behavior good bye, unless you have a hardware problem. But from what you said it sounds like tipicial glitchy stock Windows Mobile bad behavior.
Also to turn off Swype you have to touch on the little triangle arrow beside the keyboard symbol at the bottom of the keyboard. This will bring up a menu box just select to use the standard keyboard and not Swype.
T-Macgnolia said:
Yes if you install a custom ROM especially a Energy ROM you can kiss all that bad behavior good bye, unless you have a hardware problem. But from what you said it sounds like tipicial glitchy stock Windows Mobile bad behavior.
Also to turn off Swype you have to touch on the little triangle arrow beside the keyboard symbol at the bottom of the keyboard. This will bring up a menu box just select to use the standard keyboard and not Swype.
Click to expand...
Click to collapse
thanks again.
the problem is the moment the swype key board appears on screen, it becomes stuck. no key works after that. only option is a soft reset. is it safe to do the rom flash by myself? where can i find a detaild guide to do it? and what rom do you recommend? in the htc site i noted that there is a newer update to my stock rom. how would that rom workout?
If HTC has a update ROM for your HD2 I say go for that one first they should have a detailed set of instructions on the site you download it from. Most ofctge update official ROMs are 3.14 ROMs andcthe 3.14 ROMs are alot more stable considering they are stock ROMs. I do recomemd a Energy ROM if you want to try a custom ROM just read through and look at all the screen shots in the first couple of post in the thread that are by the dev of the ROMs and pick Wichita ROM he had there that you like the looks and sound of best. You can most definitely flash the ROMs yourself be it official or custom.
Here is a tutorial guide for flashing international HD2's.
http://forum.xda-developers.com/showthread.php?t=609477
Here is a tutorial guide for flashing T-Mobile USA HD2's.
http://forum.xda-developers.com/showthread.php?t=653614
Use the guide that is appropriate for the model HD2 you have.
T-Macgnolia said:
If HTC has a update ROM for your HD2 I say go for that one first they should have a detailed set of instructions on the site you download it from. Most ofctge update official ROMs are 3.14 ROMs andcthe 3.14 ROMs are alot more stable considering they are stock ROMs. I do recomemd a Energy ROM if you want to try a custom ROM just read through and look at all the screen shots in the first couple of post in the thread that are by the dev of the ROMs and pick Wichita ROM he had there that you like the looks and sound of best. You can most definitely flash the ROMs yourself be it official or custom.
Here is a tutorial guide for flashing international HD2's.
http://forum.xda-developers.com/showthread.php?t=609477
Here is a tutorial guide for flashing T-Mobile USA HD2's.
http://forum.xda-developers.com/showthread.php?t=653614
Use the guide that is appropriate for the model HD2 you have.
Click to expand...
Click to collapse
thanks very much.
i m going to try the new stock rom first and if its not ok then would try the energy rom. will keep you updated.
kanishkapd said:
thanks very much.
i m going to try the new stock rom first and if its not ok then would try the energy rom. will keep you updated.
Click to expand...
Click to collapse
hi
i have installed the new 3.14 rom. seemed ok for one day. but problems are back. when i switch on the phone, the home screen comes on as normal. after i switch to standby mode and try to start phone again the screen stays blank for about 10 minutes. the hard buttons are flashing though. after 5 min, spontaneouly recovers and again problem occurs when switched off and restarts.
any suggestion pls? do u think i should go for a cooked rom? and in which departments do the cooked roms are better than the stock? can the dutties task manager cause this problem? (i hv it installed at the moment.}
thnaks
I am no expert but ... the radio base band version ( software speaking to the hardware ) is the first thing that comes to mind....mine kept on restarting so i update it to 2.15.xx.xx and it works flawlessly now
kiki_tt said:
I am no expert but ... the radio base band version ( software speaking to the hardware ) is the first thing that comes to mind....mine kept on restarting so i update it to 2.15.xx.xx and it works flawlessly now
Click to expand...
Click to collapse
thanks
my radio version is 2.15.50.14. it cant be the problem? can it?
Do yourself a big favour & try energy ROM such as Dinik 29017 (my preffered version is 23699)
These ROMs are far more touch friendly, far more stable (yet to need soft reset on my HD2 with Energy Dinik 23699) & you will get great support if needed by reading or posting in the thread.
Have a look & read at link below;
http://forum.xda-developers.com/showthread.php?t=591784
same problem
Mister B said:
Do yourself a big favour & try energy ROM such as Dinik 29017 (my preffered version is 23699)
These ROMs are far more touch friendly, far more stable (yet to need soft reset on my HD2 with Energy Dinik 23699) & you will get great support if needed by reading or posting in the thread.
Have a look & read at link below;
http://forum.xda-developers.com/showthread.php?t=591784
Click to expand...
Click to collapse
thanks very much. surely like to try that. but still bit doubtful. if any problem can i get the stock rom back?
kanishkapd said:
thanks very much. surely like to try that. but still bit doubtful. if any problem can i get the stock rom back?
Click to expand...
Click to collapse
you can easily get the stoch rm back if there is any problem ....u should go and install hspl4 on your hd2 and then select 2.08.hspl in the installation window ... and then u can do anything with you phonei.e. put android on it or windows phone 7 if u need any help for that u can just pm me or follow some threads i myself was very scared the first time when i installed hspl but it came out to e very simple afterward
siddharth singh said:
you can easily get the stoch rm back if there is any problem ....u should go and install hspl4 on your hd2 and then select 2.08.hspl in the installation window ... and then u can do anything with you phonei.e. put android on it or windows phone 7 if u need any help for that u can just pm me or follow some threads i myself was very scared the first time when i installed hspl but it came out to e very simple afterward
Click to expand...
Click to collapse
thanks. all you guys. my newly upgraded stock rom has stuck again for the 4th time in 2 days. going to try the energy rom. hope i d be successful.
kanishkapd said:
thanks. all you guys. my newly upgraded stock rom has stuck again for the 4th time in 2 days. going to try the energy rom. hope i d be successful.
Click to expand...
Click to collapse
These ROMs are good, make sure you follow instructions & read up on it before flashing.
Get HSPL 2.08 on your HD2 & make sure your radio version is compatible & then flash Energy ROM of your choice ...
Top tip is charge battery 100% before flashing (seem to reduce battery calibration problems & can be of benefit if you run into problems, also a hard reset after custom ROM has completed first boot is good practice.
Also have some patience & give yourself time to adjust to the new ROM, asking a few questions & doing some searching will be far more productive than flashing to another ROM because of a problem.
Good luck & maybe I see you in the Energy ROM thread ...
thanks very much guys.
i got the energy rom installed successfully and already i m loving it. i m so glad i joined the xda community. one more thing pls. are these roms upgraded? how can i watch out for new upgrades, new features to be downladed...etc?
kanishkapd said:
thanks very much guys.
i got the energy rom installed successfully and already i m loving it. i m so glad i joined the xda community. one more thing pls. are these roms upgraded? how can i watch out for new upgrades, new features to be downladed...etc?
Click to expand...
Click to collapse
to be updated just keep looking out for any updates on the respective rom thread ... since u already have a custom winmo rom u culd try out this android sd build (im just trying to be of some help ) to use it u just have to download and extract the android build to your sd card dont extract it into a folder just extract the full thing to the fist screen u see when u open ur sd card... then just run clrcad first and then haret ...then enjoy ur android sd build to go back to winmo just shutdown and startup again
Edit : oops here is the URL . http://forum.xda-developers.com/showthread.php?t=957652 it was the best I used I miss it since its not avalible for nand flashing
kanishkapd said:
thanks very much guys.
i got the energy rom installed successfully and already i m loving it. i m so glad i joined the xda community. one more thing pls. are these roms upgraded? how can i watch out for new upgrades, new features to be downladed...etc?
Click to expand...
Click to collapse
Out of interest which Energy ROM did you install.
You can check for updates by looking at thread & seeing date of latest release, going for latest releases & build numbers does not always give best results. Sometimes old is gold ;-) Best to settle into your current ROM & only update if things you deem important are updated/added.
Have fun with Energy ROM, well set up it makes Android & iphone look limited & outdated & seriously has some useful features Android is missing such as Auto APN setup & organised apps & settings menu & a far more advanced mail app to mention just a few.
siddharth singh said:
to be updated just keep looking out for any updates on the respective rom thread ... since u already have a custom winmo rom u culd try out this android sd build (im just trying to be of some help ) to use it u just have to download and extract the android build to your sd card dont extract it into a folder just extract the full thing to the fist screen u see when u open ur sd card... then just run clrcad first and then haret ...then enjoy ur android sd build to go back to winmo just shutdown and startup again
Edit : oops here is the URL . http://forum.xda-developers.com/showthread.php?t=957652 it was the best I used I miss it since its not avalible for nand flashing
Click to expand...
Click to collapse
thanks. certainly would try that too.
Mister B said:
Out of interest which Energy ROM did you install.
You can check for updates by looking at thread & seeing date of latest release, going for latest releases & build numbers does not always give best results. Sometimes old is gold ;-) Best to settle into your current ROM & only update if things you deem important are updated/added.
Have fun with Energy ROM, well set up it makes Android & iphone look limited & outdated & seriously has some useful features Android is missing such as Auto APN setup & organised apps & settings menu & a far more advanced mail app to mention just a few.
Click to expand...
Click to collapse
thanks for all the advice. i installed the energy rom, the first one in the thread. liked the pictures of that rom and the dev had mentioned it was the best....
Mister B said:
Out of interest which Energy ROM did you install.
You can check for updates by looking at thread & seeing date of latest release, going for latest releases & build numbers does not always give best results. Sometimes old is gold ;-) Best to settle into your current ROM & only update if things you deem important are updated/added.
Have fun with Energy ROM, well set up it makes Android & iphone look limited & outdated & seriously has some useful features Android is missing such as Auto APN setup & organised apps & settings menu & a far more advanced mail app to mention just a few.
Click to expand...
Click to collapse
Android already has auto apn! !
Sent from my HTC HD2 using XDA App